Starting in iOS 26 (tested on 26.1), when I use any of the “policy” methods of WKNavigationDelegate to return an action policy of cancel I get a trace like this printed to console: 1 0x18de71bbc WebKit::WebFramePolicyListenerProxy::ignore(WebKit::WasNavigationIntercepted) 2 0x18db3dd50 WebKit::NavigationState::NavigationClient::decidePolicyForNavigationAction(WebKit::WebPageProxy&, WTF::Ref<API::NavigationAction, WTF::RawPtrTraits<API::NavigationAction>, WTF::DefaultRefDerefTraits<API::NavigationAction>>&&, WTF::Ref<WebKit::WebFramePolicyListenerProxy, WTF::RawPtrTraits<WebKit::WebFramePolicyListenerProxy>, WTF::DefaultRefDerefTraits<WebKit::WebFramePolicyListenerProxy>>&&)::$_0::operator()(WKNavigationActionPolicy, WKWebpagePreferences*) 3 0x100189e5c $sSo24WKNavigationActionPolicyVIeyBhy_ABIeghy_TR 4 0x100189d38 $s16WebkitPolicyTrap14ViewControllerC03webD0_06decideB3For15decisionHandlerySo05WKWebD0C_So18WKNavigationActionCySo0lmB0VctF 5 0x100189df4 $s16WebkitPolicyTrap14ViewControllerC03webD0_06decideB3For15decisionHandlerySo05WKWebD0C_So18WKNavigationActionCySo0lmB0VctFTo 6 0x18db255c0 WebKit::NavigationState::NavigationClient::decidePolicyForNavigationAction(WebKit::WebPageProxy&, WTF::Ref<API::NavigationAction, WTF::RawPtrTraits<API::NavigationAction>, WTF::DefaultRefDerefTraits<API::NavigationAction>>&&, WTF::Ref<WebKit::WebFramePolicyListenerProxy, WTF::RawPtrTraits<WebKit::WebFramePolicyListenerProxy>, WTF::DefaultRefDerefTraits<WebKit::WebFramePolicyListenerProxy>>&&) 7 0x18dea9848 WebKit::WebPageProxy::decidePolicyForNavigationAction(WTF::Ref<WebKit::WebProcessProxy, WTF::RawPtrTraits<WebKit::WebProcessProxy>, WTF::DefaultRefDerefTraits<WebKit::WebProcessProxy>>&&, WebKit::WebFrameProxy&, WebKit::NavigationActionData&&, WTF::CompletionHandler<void (WebKit::PolicyDecision&&)>&&) 8 0x18dea7a34 WebKit::WebPageProxy::decidePolicyForNavigationActionAsync(IPC::Connection&, WebKit::NavigationActionData&&, WTF::CompletionHandler<void (WebKit::PolicyDecision&&)>&&) 9 0x18d9cbbf4 void IPC::handleMessageAsync<Messages::WebPageProxy::DecidePolicyForNavigationActionAsync, IPC::Connection, WebKit::WebPageProxy, WebKit::WebPageProxy, void (IPC::Connection&, WebKit::NavigationActionData&&, WTF::CompletionHandler<void (WebKit::PolicyDecision&&)>&&)>(IPC::Connection&, IPC::Decoder&, WebKit::WebPageProxy*, void (WebKit::WebPageProxy::*)(IPC::Connection&, WebKit::NavigationActionData&&, WTF::CompletionHandler<void (WebKit::PolicyDecision&&)>&&)) 10 0x18d9c7728 WebKit::WebPageProxy::didReceiveMessage(IPC::Connection&, IPC::Decoder&) 11 0x18e49a0d8 IPC::MessageReceiverMap::dispatchMessage(IPC::Connection&, IPC::Decoder&) 12 0x18df1908c WebKit::WebProcessProxy::dispatchMessage(IPC::Connection&, IPC::Decoder&) 13 0x18d9dfc28 WebKit::WebProcessProxy::didReceiveMessage(IPC::Connection&, IPC::Decoder&) 14 0x18e47f72c IPC::Connection::dispatchMessage(WTF::UniqueRef<IPC::Decoder>) 15 0x18e47fac4 IPC::Connection::dispatchIncomingMessages() 16 0x199ad3758 WTF::RunLoop::performWork() 17 0x199ad4eb0 WTF::RunLoop::performWork(void*) 18 0x1804563a4 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ 19 0x1804562ec __CFRunLoopDoSource0 20 0x180455a78 __CFRunLoopDoSources0 21 0x180454c4c __CFRunLoopRun 22 0x18044fcec _CFRunLoopRunSpecificWithOptions 23 0x1926be9bc GSEventRunModal 24 0x18630f0d8 -[UIApplication _run] 25 0x186313300 UIApplicationMain 26 0x18554ac38 block_destroy_helper.15 27 0x10018a70c $sSo21UIApplicationDelegateP5UIKitE4mainyyFZ 28 0x10018a67c $s16WebkitPolicyTrap11AppDelegateC5$mainyyFZ 29 0x10018a818 __debug_main_executable_dylib_entry_point 30 0x1000cd3d0 29 dyld 0x00000001000cd3d0 start_sim + 20 31 0x1002bab98 30 ??? 0x00000001002bab98 0x0 + 4297829272 This doesn’t happen in 18.6. Also, it doesn’t seem to have any negative consequences other than the console spam? But then, the navigation is being cancelled anyway, so maybe it’s trapping and just happens to have the effect of not loading the request? Anyway, I guess I can’t upload zips. But it’s pretty easy to reproduce. Just assign a WKWebView a navigationDelegate with an implementation like: func webView(_ webView: WKWebView, decidePolicyFor navigationAction: WKNavigationAction, decisionHandler: @escaping @MainActor (WKNavigationActionPolicy) -> Void) { decisionHandler(.cancel) } and then have it .load() anything. Have I been doing this wrong and 26 exposes it? Or is this a bug in 26? If the latter, any downstream consequences I should be looking out for? macOS 15.7.1 (24G231) Xcode 26.1.1 (17B100) iOS 26.1 (23B86)

Hello WebKit Team, I’m writing to ask if iOS provides a native way to intercept AJAX (XMLHttpRequest or fetch) calls inside WKWebView. On Android, this is handled via: shouldInterceptRequest(WebView view, WebResourceRequest request) but iOS currently seems to have no equivalent. We’ve tried: WKURLSchemeHandler → works only for custom schemes URLProtocol with WKProcessPool → unreliable for AJAX in WebView JavaScript injection → partial and unofficial Could you please clarify: Is there a recommended native approach to intercept AJAX requests? If not supported, is it planned for future releases? Any official workaround or guidance? This is critical for debugging, analytics, and compliance in hybrid apps.

Reproducibility 100% on iOS 15.4 and iOS 16.6 Zero crash on iOS 18.6 Xcode 26.1 Steps to Reproduce Xcode 26.1 → New iOS App Replace ViewController.swift with the 20-line code below Run on real device • iPhone XR iOS 15.4 • iPhone 13 iOS 16.6 Tap the link → breakpoint in decidePolicyFor lldb → po navigationAction.sourceFrame Actual Result (lldb) po navigationAction.sourceFrame nil Swift declaration lies: public var sourceFrame: WKFrameInfo { get } // non-optional → Instant EXC_BREAKPOINT libswiftFoundation.dylib`URLRequest._unconditionallyBridgeFromObjectiveC Objective-C tells the truth: po [(WKNavigationAction *)navigationAction fixedSourceFrame] nil iOS 18.6 → same code prints a valid WKFrameInfo, no crash. Expected sourceFrame must be declared WKFrameInfo? in Swift or at least documented “can be nil on iOS 15–16”. Impact Every WKWebView app that touches sourceFrame on iOS 15.4 & 16.6 ships with a latent crash. Production Workaround @implementation WKNavigationAction (Safe) (WKFrameInfo *)fixedSourceFrame { return self.sourceFrame ? self.sourceFrame : nil; } @end Minimal Test (copy-paste) import UIKit import WebKit class ViewController: UIViewController, WKNavigationDelegate { lazy var web = WKWebView(frame: view.bounds) override func viewDidLoad() { super.viewDidLoad() web.navigationDelegate = self view.addSubview(web) web.load(URLRequest(url: URL(string: "https://www.apple.com")!)) } func webView(_ webView: WKWebView, decidePolicyFor navigationAction: WKNavigationAction, preferences: WKWebpagePreferences, decisionHandler: @escaping (WKNavigationActionPolicy, WKWebpagePreferences)->Void) { print(navigationAction.sourceFrame) // ← crashes on 15.4 & 16.6 decisionHandler(.allow, preferences) } }

Hey Guys My PWA video playback and even youtube videos stopped working after updating iOS to 26.0.1. The video thumnails appear fine and if i try to play the video, it remains stuck. If i restart the phone, the video plays for a second in the PWA and then stops again and entire app gets stuck. Request apple team to fix this issue at the earliest. This is hampering all my iOS users who install the PWA on their device homescreen and use it as app. FYI strangely EVERYTHING WORKS FINE ON iOS SAFARI browser including videos playback If i open it as a web app. so this seems like a specific PWA issue on latest ios 26.0.1

Hi, How are we supposed to handle links with target="_blank" in the new SwiftUI WebView? I don't see anything in WebPage.NavigationDeciding or elsewhere that corresponds to the delegate method used for WKWebView.

myCode is here // titleScript = "document.querySelector('#\(rawValue) span')?.textContent" guard let titleResult = try? await webView.evaluateJavaScript(type.titleScript), let title = titleResult as? String else { return } this code has error Thread 1: Swift runtime failure: Unexpectedly found nil while implicitly unwrapping an Optional value but edit Code like this It is works Successful do { ... let titleResult = try await webView.evaluateJavaScript(type.titleScript) let title = titleResult as? String ... } catch { LogManager.log(level: .error, self, #function, error, "title is Invalid : \(type.titleScript)") continue } I don't know why guard let _ = try? is Fail

Up until some point relatively recently, I have been able to use Safari's web inspector to connect to the iOS simulator in order to debug our web application in development at http://localhost:8088. Now, the web inspector still OPENS, but it opens in a broken state. The context is available to select from Safari's "Develop" menu: Develop > "iPhone 16 Pro (Simulator)" > "localhost - login". It appears under the Safari heading if I have navigated to the web app in the browser, or under the Expo heading if I am accessing it through the webview in our React Native wrapper app. When I select it, the web inspector window does appear. However, once it opens, the Elements pane is empty, the Console pane is empty, expressions entered into the console are not evaluated, there's no content in Sources, Network, Storage, etc. Important notes: This broken state happens at http://localhost:8088 as well as http://127.0.0.1:8088, and it seems that the insecure context is the issue. The web inspector DOES work for HTTPS sites. If I navigate to, e.g., https://example.com in the simulator and connect the web inspector, everything works fine. The web inspector also works fine in Safari on macOS (OUTSIDE the simulator) when accessing non-HTTPS sites. It's only a problem for non-HTTPS sites when connecting to the simulator. A coworker has the same problem, so it is not isolated to my machine. I would enable TLS locally as a workaround, but this web app is very complex, and I know from experience that it is very difficult for various reasons to set it up properly for our project in development, and it will take significant non-trivial work to do so. So... Why is this happening? Is this expected behavior? Is there a way that I can debug my site on localhost without HTTPS?

After upgrading to Safari version 18, we encountered an issue with my extension’s background script not being able to access cookies. Previously, in Safari versions 17 and below, the extension worked as expected. Now, when the extension tries to retrieve cookies using browser.cookies.getAll(), it returns an empty list. However, if we open the extension’s developer tools, the cookies are visible and accessible. It seems that Safari only provides cookie data after the developer tools have been opened. However, after relaunching Safari and launching the extension without opening the developer tools, browser.cookies.getAll() still returns an empty list. Has anyone else experienced this? STEPS TO REPRODUCE Download this minimal app : https://www.icloud.com/iclouddrive/0bajlhnuQaG6T5NsFKXEB0U9Q#test%5Fcookies Compile test_mv2 extension (in test_cookies.getAll.zip). Launch test_mv2.app and activate extension. Click on the extension's button (browserAction). Open the developer tools. Observe an empty list of cookies. Click on the extension's button (browserAction). Cookies are retrieved as expected.

Hello - we have a Mac application that uses a browser extension and the web extension JS APIs to communicate with Safari. As of macOS 15.4 / Safari 18.4 the tab OnAttached and tab onDetached events are no longer received. After some testing we verified that the events were working properly as of macOS 15.3 / Safari 18.3 but appear to have been broken in macOS 15.4. Note a similar issue was reported previously for Safari 17.6 and was fixed in macOS 15.0 (FB14324177). We have made a TestFlight version of our app (Tabby) available to simplify debugging via https://testflight.apple.com/join/Va8Zdv9d. To reproduce the issue: Install the Tabby TestFlight build on macOS 15.4 or 15.4.1 Open Safari, go to Safari settings and select the Extensions tab Enable the Tabby extension and grant permissions to all windows all the time Open a Safari window with at least 3 tabs Note the open window and tabs displayed in Tabby In Safari, perform a tab detach by dragging a tab out of the window Expected behavior Within Safari the detached tab should now be in it’s own window, and via the onDetached event Tabby should update to show the tab in it’s own window AND removed from the original window. Observed Safari fails to send the onDetached event and Tabby will continue to display the detached tab in its original window in addition to the new window. You can also use the repro steps above to observe the onDetached event being received or not by Tabby in the Safari developer console. The same steps but re-attaching the tab to the original window can be used to observe the onAttached event being received or not. We’ve attached two screen recordings to the Feedback ID below, one showing the events working on macOS 15.3, and one showing the events failing to be received on macOS 15.4.1. Note it also fails on macOS 15.4. FEEDBACK ID: FB17367977

I'm working on a regular website, in which I'm trying to debug using the (MacOS) Safari Development tools. Since updating my Simulator to iOS 16.4, console.log is no longer displayed in the Console. Even when executing it directly in the console (console.log('test');), it's not printed. Now, I've read that this is a feature for debugging in-app browser content (https://webkit.org/blog/13936/enabling-the-inspection-of-web-content-in-apps/) but can't find the regular web workaround here. TL;DR: No longer see console.log in iOS 16.4 Safari when debugging from my Mac. Thanks in advance for your suggestions!

Problem As the title says, Safari lost all my tabs once I updated to macOS 15.4. I do of course have "Safari opens with: All windows from last session" set. This has been my default for many years. Past Mitigation In the past I had a script that I could use to backup ~/Library/Safari that would save all my bookmarks and tabs. Unfortunately they made this method of backup non-function sometime around when tab groups were introduced. Suggestion Fortunately my tab groups are still intact. But this sort of problem doesn't give me a lot of confidence. I haven't had something like this happen in a while, but when it does happen, it's quite frustrating. Apple really needs to recognize that this sort of thing can and will happen and they should make it easier for users to manually save/restore their tabs. Problem with forums To add insult to injury, as I was typing this message in the forum, I decided to select "Edit Bookmarks"... which proceeded to replace the current window with my bookmarks, thereby losing my post! It did this without warning of page content changes (which I get from most other websites). I felt somewhat relieved that the forum had recognized a previous draft and offered for me to continue. However, when I selected it, it brought me back to an old post... that was actually posted! smh

Hello, In iOS 26 beta, we are seeing an unexpected behavior when using SwiftUI WebView (or a custom WKWebView via UIViewRepresentable). When an alert is presented above the WebView, the WebView immediately reloads to its initial page. The alert itself also disappears instantly, making it impossible for the user to interact with it. This issue occurs both with the new SwiftUI WebView / WebPage API and with a wrapped WKWebView. The problem was not present in previous iOS versions (iOS 17/18). Steps to reproduce: Create a SwiftUI view with a WebView (pointing to any URL). Add a toolbar button that toggles a SwiftUI alert. Run the app on iOS 26 beta. Tap the button to trigger the alert. Expected behavior: The WebView should remain as-is, and the alert should stay visible until the user dismisses it. Actual behavior: As soon as the alert appears, the WebView reloads and resets to the initial page. The alert disappears immediately. Minimal Example: struct ContentView: View { @State private var showAlert = false var body: some View { NavigationStack { WebView(URL(string: "https://apple.com")!) .toolbar { ToolbarItem(placement: .topBarTrailing) { Button("Close") { showAlert = true } } } .alert("Confirm close?", isPresented: $showAlert) { Button("Cancel", role: .cancel) {} Button("Close", role: .destructive) {} } } } } I'm using Xcode Version 26.0 beta 7 Thanks for your help.

"The Referer header allows a server to identify referring pages that people are visiting from or where requested resources are being used. " This header is never forwarded to server when the user is browsing the website in a WebView. This is properly maintained by other browsers but not in-app. How do I include it?

Even default Safari Web Extension project is not displayed on iOS 18.4 simulator ("No extensions installed"), so it's not possible to test extensions in simulator, only on real device.

Bug Report: Safari refuses to render content that is position: fixed or position: sticky if it goes below the iOS 26 navigation controls at the bottom of the browser. Since the controls are transparent and floating, this is a problem as fixed content is effectively unable to reach the bottom of the page. Attempting to move it below 100vh causes it to be cut off rather than rendering behind the navigation elements. Here is some code reproducing the issue: <!DOCTYPE html> <html lang="en"> <head> <meta charset="UTF-8"> <meta name="viewport" content="width=device-width, initial-scale=1.0"> <style> html, body { margin: 0; padding: 0; background-color: #363636; } #just-a-bird { position: fixed; bottom: -100px; width: 300px; height: auto; background: red; } </style> </head> <body> <img id="just-a-bird" src="https://upload.wikimedia.org/wikipedia/commons/thumb/e/e1/Cattle_tyrant_%28Machetornis_rixosa%29_on_Capybara.jpg/640px-Cattle_tyrant_%28Machetornis_rixosa%29_on_Capybara.jpg"> </body> </html>

I don't think the issue is specific iOS 18. We have a web application that runs with IIS Authentication of Windows and Anonymous. Initially the app opens and the user clicks a button and triggers the "401 Challenge" via ASP.NET. The browser presents the Active Directory login, user enters credentials, clicks Sign In, and the browser hangs (may actually be negotiating something). After a few minutes the user is logged into the application. We have done a number of google searches/AI to try to determine what to change and there is no clear solution. Is there anything else to try? This problem is not seen in Chrome on iOS or on a Windows machine. Strangely it is also not seen using BrowserStack with one of their "real" devices. We have other apps that run with just Windows Authorization and this problem is not observed.

I am a newby to JavaScript, suggested to me to use to automate the task of opening of a Web page, selecting three internal buttons in sequence to download the underlying chart data. I have created the App via Automator on macOS, to run the Script, successfully open the Web Page, but cannot find a way to select and click() on the buttons. Can someone please help me. Robert. This is the code suggested by Grok 3 Beta, but I see this error: Error: First parameter passed to Document Constructor must be an object. function run(input, parameters) { var Safari = Application('Safari'); Safari.activate(); // Open the AEMO data dashboard (Grok 3 Beta recomendation opens the web page correctly) Safari.Document().make(); Safari.windows[0].currentTab.url = 'https://www.aemo.com.au/energy-systems/electricity/national-electricity-market-nem/data-nem/data-dashboard-nem'; delay(10); // Wait for page to load // Click the Fuel Mix tab (target the active in the tabs) Safari.Document(0).doJavaScript("document.querySelector('.tabs .active').click()"); delay(5); // Wait for tab content to load // Select 48 hrs from the dropdown Safari.Document(0).doJavaScript("document.querySelector('#interval').value = '48H'; document.querySelector('#interval').dispatchEvent(new Event('change'))"); delay(5); // Wait for selection to take effect // Click the download button Safari.Document(0).doJavaScript("document.querySelector('.visualisation-icon-button').click()"); return input; }

Hello, I am experiencing an issue when trying to open the browser on my Apple Watch SE 2 running the latest version, watchOS 11.6. When I attempt to visit any website, the browser opens and displays the URL at the top as if it is loading, but the screen remains black and no content is displayed. The internet connection is available, and all other apps on the watch work normally. This issue occurs only with the browser. I would appreciate any guidance or solution to resolve this problem. Thank you for your assistance.

A DNR rule with lower priority is being applied before a DNR rule of higher priority on Safari. Specifically, a low-priority DNR block rule that matches a request is being applied before a high-priority DNR redirect rule that matches the same request, preventing the redirect from occurring. The only way to get the high-priority redirect rule to occur is to remove the DNR block rule. This does not occur on other browsers. I have already submitted a Feedback Assistant report about this bug: FB16535579 How to reproduce: Create/install a web extension on Safari with the declarativeNetRequest and declarativeNetRequestWithHostAccess permissions Open the Web Extension Background Content console and add a redirect rule with a high priority number. For example: await chrome.declarativeNetRequest.updateDynamicRules({addRules: [ {id: 5000, condition: {urlFilter: "||www.google-analytics.com*/ga.js", resourceTypes: ["script"], domainType: "thirdParty"}, priority: 80, action: {type: "redirect", redirect: {url: “http://www.apple.com/”}}} ]}) Add a block rule of lower priority for the same urlFilter: await chrome.declarativeNetRequest.updateDynamicRules({addRules: [ {id: 5001, condition: {urlFilter: "||www.google-analytics.com^", domainType: "thirdParty"}, priority: 1, action: {type: "block"}} ]}) Visit https://efforg.github.io/privacybadger-test-fixtures/html/ga_surrogate.html Check the network tab and see that neither a request to Google Analytics nor apple.com appear. This means that the request to Google Analytics was blocked instead of being / before being redirected Remove the block rule: await chrome.declarativeNetRequest.updateDynamicRules({removeRuleIds: [5001]}) Reload https://efforg.github.io/privacybadger-test-fixtures/html/ga_surrogate.html. Check the network tab and confirm that there is a request to apple.com, showing that the redirect rule is only applied if the lower-priority block rule is removed. The priority of the DNR rules should handle this without having to remove a DNR rule. I have confirmed that the incorrect application of DNR rule priority happens on other top level domains, with other urlFilters, and with other redirect URLs. I confirmed that this is happening while I’ve granted my extension permissions on all websites.

Hi all, With version 18.4 beta, I have a problem with the display of webviews in the app. In particular, the app of my bank has webviews inside it, and as they are not loading, I am unable to access it. Can you help me? Thank you.