Hi everyone, I’m working on an iOS MusicKit app that overlays a metronome on top of Apple Music playback. To line the clicks up perfectly I’d like access to low-level audio analysis data—ideally a waveform / spectrogram or beat grid—while the track is playing. I’ve noticed that several approved DJ apps (e.g. djay, Serato, rekordbox) can already: • Display detailed scrolling waveforms of Apple Music songs • Scratch, loop or time-stretch those tracks in real time That implies they receive decoded PCM frames or at least high-resolution analysis data from Apple Music under a special entitlement. My questions: 1. Does MusicKit (or any public framework) expose real-time audio buffers, FFT bins, or beat markers for streaming Apple Music content? 2. If not, is there an Apple program or entitlement that developers can apply for—similar to the “DJ with Apple Music” initiative—to gain that deeper access? 3. Where can I find official documentation or a point of contact for this kind of request? I’ve searched the docs and forums but only see standard MusicKit playback APIs, which don’t appear to expose raw audio for DRM-protected songs. Any guidance, links or insider tips on the proper application process would be hugely appreciated! Thanks in advance.

Hi everyone, I’m working on an iOS MusicKit app that overlays a metronome on top of Apple Music playback. To line the clicks up perfectly I’d like access to low-level audio analysis data—ideally a waveform / spectrogram or beat grid—while the track is playing. I’ve noticed that several approved DJ apps (e.g. djay, Serato, rekordbox) can already: • Display detailed scrolling waveforms of Apple Music songs • Scratch, loop or time-stretch those tracks in real time That implies they receive decoded PCM frames or at least high-resolution analysis data from Apple Music under a special entitlement. My questions: 1. Does MusicKit (or any public framework) expose real-time audio buffers, FFT bins, or beat markers for streaming Apple Music content? 2. If not, is there an Apple program or entitlement that developers can apply for—similar to the “DJ with Apple Music” initiative—to gain that deeper access? 3. Where can I find official documentation or a point of contact for this kind of request? I’ve searched the docs and forums but only see standard MusicKit playback APIs, which don’t appear to expose raw audio for DRM-protected songs. Any guidance, links or insider tips on the proper application process would be hugely appreciated! Thanks in advance.

{ "aps": { "content-available": 1 }, "audio_file_name": "ding.caf", "audio_url": "https://example.com/audio.mp3" } When the app is in the background or killed, it receives a remote APNs push. The data format is roughly as shown above. How can I play the MP3 audio file at the specified "audio_url"? The user does not need to interact with the device when receiving the APNs. How can I play the audio file immediately after receiving it?

I have some tried-and-tested code that records and plays back audio via AUHAL which breaks on Tahoe on Intel. The same code works fine on Sequioa and also works on Tahoe on Apple Silicon. To start with something simple, the following code to request access to the Microphone doesn't work as it should: bool RequestMicrophoneAccess () { __block AVAuthorizationStatus status = [AVCaptureDevice authorizationStatusForMediaType: AVMediaTypeAudio]; if (status == AVAuthorizationStatusAuthorized) return true; __block bool done = false; [AVCaptureDevice requestAccessForMediaType: AVMediaTypeAudio completionHandler: ^ (BOOL granted) { status = (granted) ? AVAuthorizationStatusAuthorized : AVAuthorizationStatusDenied; done = true; }]; while (!done) CFRunLoopRunInMode (kCFRunLoopDefaultMode, 2.0, true); return status == AVAuthorizationStatusAuthorized; } On Tahoe on Intel, the code runs to completion but granted is always returned as NO. Tellingly, the popup to ask the user to grant microphone access is never displayed, even though the app is not present in the Privacy pane and never appears there. On Apple Silicon, everything works fine. There are some other problems, but I'm hoping they have a common underlying cause and that the Apple guys can figure out what's wrong from the information in this post. I'd be happy to test any potential fix. Thanks.

I've been wondering if there is a way to modify or even disable tones for indicating channel states. The behaviour regarding tones seems like a black box with little documentation. During migration to Apple's PT Framework we've noticed that there are few scenarios where a tone is played which doesn't match certain certifications. For example; moving from a channel to another produces a tone which would fail a test case. I understand the reasoning fully, as it marks that the channel is ready to transmit or receive, but this doesn't mirror the behaviour of TETRA which would be wanted in this case. I'm also wondering if there would be any way to directly communicate feedback regarding PT Framework?

Hi, I try to record audio on the iPhone with the AVAudioRecorder and Xcode 26.0.1. Maybe the problem is that I can not record audio with the simulator. But there's a menu for audio. In the plist I added 'Privacy - Microphone Usage Description' and I ask for permission before recording. if await AVAudioApplication.requestRecordPermission() { print("permission granted") recordPermission = true } else { print("permission denied") } Permission is granted. let settings: [String : Any] = [ AVFormatIDKey: kAudioFormatMPEG4AAC, AVSampleRateKey: 12000, AVNumberOfChannelsKey: 1, AVEncoderAudioQualityKey: AVAudioQuality.high.rawValue ] recorder = try AVAudioRecorder(url: filename, settings: settings) let prepared = recorder.prepareToRecord() print("prepared started: \(prepared)") let started = recorder.record() print("recording started: \(started)") started is always false and I tried many settings. Error messages AddInstanceForFactory: No factory registered for id <CFUUID 0x600000211480> F8BB1C28-BAE8-11D6-9C31-00039315CD46 AudioConverter.cpp:1052 Failed to create a new in process converter -> from 0 ch, 12000 Hz, .... (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame to 1 ch, 12000 Hz, aac (0x00000000) 0 bits/channel, 0 bytes/packet, 1024 frames/packet, 0 bytes/frame, with status -50 AudioQueueObject.cpp:1892 BuildConverter: AudioConverterNew returned -50 from: 0 ch, 12000 Hz, .... (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame to: 1 ch, 12000 Hz, aac (0x00000000) 0 bits/channel, 0 bytes/packet, 1024 frames/packet, 0 bytes/frame prepared started: true AudioQueueObject.cpp:7581 ConvertInput: aq@0x10381be00: AudioConverterFillComplexBuffer returned -50, packetCount 5 recording started: false All examples I find are the same, but apparently there must be something different.

After update,WeChat voice chatting no sounds, please help

Hi everyone 👋 I’m building an iOS app in Swift where I want to do the following: Record the user’s voice Transcribe the spoken sentence (speech-to-text) Auto-detect the spoken language Translate it to another language selected by the user (e.g., English → Spanish or Hindi → English) Speak back (text-to-speech) the translated text on the same device Is this possible to record via phone mic and play the transcribe voice into headphone's audio?

Hi, I'm trying to setup a AVAudioEngine for USB Audio recording and monitoring playthrough. As soon as I try to setup playthough I get an error in the console: AVAEInternal.h:83 required condition is false: [AVAudioEngineGraph.mm:1361:Initialize: (IsFormatSampleRateAndChannelCountValid(outputHWFormat))] Any ideas how to fix it? // Input-Device setzen try? setupInputDevice(deviceID: inputDevice) let input = audioEngine.inputNode // Stereo-Format erzwingen let inputHWFormat = input.inputFormat(forBus: 0) let stereoFormat = AVAudioFormat(commonFormat: inputHWFormat.commonFormat, sampleRate: inputHWFormat.sampleRate, channels: 2, interleaved: inputHWFormat.isInterleaved) guard let format = stereoFormat else { throw AudioError.deviceSetupFailed(-1) } print("Input format: \(inputHWFormat)") print("Forced stereo format: \(format)") audioEngine.attach(monitorMixer) audioEngine.connect(input, to: monitorMixer, format: format) // MonitorMixer -> MainMixer (Output) // Problem here, format: format also breaks. audioEngine.connect(monitorMixer, to: audioEngine.mainMixerNode, format: nil)

Hey there, I just upgraded to Mac OS Tahoe ,son an apple MacBook Pro 2019 16inch. am using IntellijIDEA and Flutter to develop a mobile app which I test on the simulator app running iOS 18.4 . the issue: when I start the simulator app. ( while in the loading phase and in the operation phase as well ), the audio from an already open YouTube tab on safari (this happens on chrome browser as well). the sound glitches and becomes Noise. a fix I found online is to kill the audio deamon on Mac OS, This works using the command: "sudo killall coreaudiod" this kills the audio process, (while the emulator is operational), then the macOS restarts the audio deamon then the audio works fine alongside with the simulator being open. I just want to ask is there a permanent fix for this? is Apple working on a fix for this in the upcoming update?

I am trying to use SpeechTranscriber from Speech framework. Is it possible to use it on Simulator of iOS 26 (Mac OS Tahoe)? Function "supportedLocales" returns an empty array.

Hi all, I have been quite stumped on this behavior for a little bit now, so thought it best to share here and see if someone more experience with AVAudioEngine / AVAudioSession can weigh in. Right now I have a AVAudioEngine that I am using to perform some voice chat with and give buffers to play. This works perfectly until route changes start to occur, which causes the AVAudioEngine to reset itself, which then causes all players attached to this engine to be stopped. Once a AVPlayerNode gets stopped due to this (but also any other time), all samples that were scheduled to be played then get purged. Where this becomes confusing for me is the completion handler gets called every time regardless of the sound actually being played. Is there a reliable way to know if a sample needs to be rescheduled after a player has been reset? I am not quite sure in my case what my observer of AVAudioEngineConfigurationChange needs to be doing, as this engine only handles output. All input is through a separate engine for simplicity. Currently I am storing a queue of samples as they get sent to the AVPlayerNode for playback, and after that completion checking if the player isPlaying or not. If it's playing I assume that the sound actually was played- and if not then I leave it in the queue and assume that an observer on the route change or the configuration change will realize there are samples in the queue and reset them Thanks for any feedback!

I have a PCM audio buffer (AVAudioPCMFormatInt16). When I try to play it using AVPlayerNode / AVAudioEngine an exception is thrown: "[[busArray objectAtIndexedSubscript:(NSUInteger)element] setFormat:format error:&nsErr]: returned false, error Error Domain=NSOSStatusErrorDomain Code=-10868 (related thread https://forums.developer.apple.com/forums/thread/700497?answerId=780530022#780530022) If I convert the buffer to AVAudioPCMFormatFloat32 playback works. My questions are: Does AVAudioEngine / AVPlayerNode require AVAudioPCMBuffer to be in the Float32 format? Is there a way I can configure it to accept another format instead for my application? If 1 is YES is this documented anywhere? If 1 is YES is this required format subject to change at any point? Thanks! I was looking to watch the "AVAudioEngine in Practice" session video from WWDC 2014 but I can't find it anywhere (https://forums.developer.apple.com/forums/thread/747008).

I want the audio session to always use the built-in microphone. However, when using the setPreferredInput() method like in this example private func enableBuiltInMic() { // Get the shared audio session. let session = AVAudioSession.sharedInstance() // Find the built-in microphone input. guard let availableInputs = session.availableInputs, let builtInMicInput = availableInputs.first(where: { $0.portType == .builtInMic }) else { print("The device must have a built-in microphone.") return } // Make the built-in microphone input the preferred input. do { try session.setPreferredInput(builtInMicInput) } catch { print("Unable to set the built-in mic as the preferred input.") } } and calling that function once in the initializer, the audio session still switches to the external microphone once one is plugged in. The session's preferredInput is nil again at that point, even if the built-in microphone is still listed in availableInputs. So, why is the preferredInput suddenly reset? when would be the appropriate time to set the preferredInput again? Observing the session’s availableInputs did not work and setting the preferredInput again in the routeChangeNotification handler seems a bad choice as it’s already a bit too late then.

I have an iPadOS M-processor application with two different running configurations. In config1, the shared AVAudioSession is configured for .videoChat mode using the built-in microphone. The input/output nodes of the AVAudioEngine are configured with voice processing enabled. The built-in mic is formatted for 1 channel at 48KHz. In config2, the shared AVAudioSession is configured for .measurement mode using an external USB microphone. The input/output nodes of the AVAudioEngine are configured with voice processing disabled. The external mic is formatted for 2 channels at 44.1KHz I've written a configuration manager designed to safely switch between these two configurations. It works by stopping AVAudioEngine and detaching all but the input and output nodes, updating the shared audio session for the desired mic and sample-rates, and setting the appropriate state for voice processing to either true or false as required by the configuration. Finally the new audio graph is constructed by attaching appropriate nodes, connecting them, and re-starting AVAudioEngine I'm experiencing what I believe is a race-condition between switching voice processing on or off and then trying to re-build and start the new audio graph. Even though notifications, which are dumped to the console indicate that my requested input and sample-rate settings are in place, I crash when trying to start the audio engine because the sample-rate is wrong. Investigating further it looks like the switch from remote I/O to voice-processing I/O or vice-versa has not yet actually completed. I introduced a 100ms second delay and that seems to help but is obviously not a reliable way to build software that must work consistently. How can I make sure that what are apparently asynchronous configuration changes to the shared audio session and the input/output nodes have completed before I go on? I tried using route change notifications from the shared AVAudioSession but these lie. They say my preferred mic input and sample-rate setting is in place but when I dump the AVAudioEngine graph to the debugger console, I still see the wrong sample rate assigned to the input/output nodes. Also these are the wrong AU nodes. That is, VPIO is still in place when RIO should be, or vice-versa. How can I make the switch reliable without arbitrary time delays? Is my configuration manager approach appropriate (question for Apple engineers)?

My audio app shows a control bar at the bottom of the window. The controls show nicely, but there is a black "slab" appearing behind the inline controls, the same size as the playerView. Setting the player view background color does nothing: playerView.wantsLayer = true playerView.layer?.backgroundColor = NSColor.clear.cgColor How can I clear the background? If I use .floating controlsStyle, I don't get the background "slab".

Using an iPhone Pro 12 running iOS 26.0.1, with AirPods Pro 3. Camera app does capture video with what seems to be "Studio Quality Recording". Am trying to replicate that SQR with my own Camera like app, and while I can pull audio in from the APP3 mic, and my video capture app is recording a 48,000Hz high-bitrate video, the audio still sounds non-SQR. I'm seeing bluetoothA2DP , bluetoothLE , bluetoothHFP as portType, and not sure if SQR depends on one of those? Is there sample code demonstrating a SQR capture? Nevermind video and camera, just audio even? Also, I don't understand what SQR is doing between the APP3 and the iPhone. What codec is that? What bitrate is that? If I capture video using Capture and inspect the audio stream I see mono 74.14 kbit/s MPEG-4 AAC, 48000 Hz. But I assume that's been recompressed and not really giving me any insight into the APP3 H2 transmission?

I'm working on a project to support spatial audio editing, using this sample project as a reference: https://developer.apple.com/documentation/Cinematic/editing-spatial-audio-with-an-audio-mix This sample works well on an unedited capture, but does not work for a capture that has already been edited. The failure is occurring at "let audioInfo = try await CNAssetSpatialAudioInfo(asset: myAsset)", which is throwing "no eligible audio tracks in asset". I also find that for already edited captures, if i use CNAssetSpatialAudioInfo.assetContainsSpatialAudio, it returns false. What i mean by "already edited" is that if I take a spatial capture with my iPhone 16, and then edit that capture in the Photos app using the Cinematic effect, and then save the edited output (e.g. edited_capture.mov), I can't import that edited_capture.mov into my project as a spatial audio asset. Is this intentional behavior or a bug? If it's intentional, can you describe why?

Hi, when using ApplicationMusicPlayer from MusicKit my app automatically gets the media controls on the lock screen: Play/ Pause, Skip Buttons, Playback Position etc. I would like to customize these. Tried a bunch of things, e.g. using MPRemoteCommandCenter. So far I haven't had any success. Does anyone know how I can customize the media controls of ApplicationMusicPlayer. Thank you.

Hello everyone, I'm implementing the new AVInputPickerInteraction API on iOS 26 to allow users to select their microphone from a custom settings menu before recording. The implementation seems correct, but I'm encountering a strange issue where the input selection immediately reverts to the previous device. The Situation: The picker is presented correctly via a manual call to .present(). I can see all available inputs (e.g., "iPhone Microphone" and "AirPods"). The current input is "iPhone Microphone". I tap on "AirPods". The UI updates to show "AirPods" as selected for a fraction of a second, then immediately jumps back to "iPhone Microphone". The same thing happens in reverse. It seems like the system is automatically reverting the audio route change requested by the picker. My Implementation: My setup follows the standard pattern discussed in the WWDC sessions. Setup Code: This setup is performed once before the user can trigger the picker. @available(iOS 26.0, *) var inputPickerInteraction: AVInputPickerInteraction? // Note: The AVAudioSession is configured to .playAndRecord // and set to active elsewhere in the code before this setup is called. if #available(iOS 26.0, *) { // Setup the picker let picker = AVInputPickerInteraction() self.inputPickerInteraction = picker self.view.addInteraction(picker) // Added to establish context } Presentation Code: When a user selects "Change Input" from my custom settings menu, I call .present() on the main thread. // In a delegate method from a custom menu if #available(iOS 26.0, *) { DispatchQueue.main.async { self.inputPickerInteraction?.present(animated: true) } } What I've already checked: The AVAudioSession is active and its category is .playAndRecord. The inputPickerInteraction object is not nil. The .present() method is being called on the main thread. The picker is added to a view using view.addInteraction() in the setup phase. I've reviewed my code to ensure there is no other logic that could be manually resetting the AVAudioSession's preferred input. Has anyone else experienced this behavior? I suspect this might be a bug in the new API, but I want to make sure I'm not missing a crucial step in managing the AVAudioSession state. Any insights or potential workarounds would be greatly appreciated. Thank you.