Apple iPad Air device failing to enroll through ABM with "failed to retrieve configuration" error. This error occurs while reaching Apple ABM for fetching MDM server enrollment details. When we checked console logs when enrolling the device we found following error: ​default 13:54:07.229022+1000 teslad Error: Error Domain=MCCloudConfigurationErrorDomain Code=34004 "The cloud configuration server is unavailable or busy." UserInfo={NSLocalizedDescription=The cloud configuration server is unavailable or busy., CloudConfigurationErrorType=CloudConfigurationFatalError} default 13:54:07.229120+1000 Setup Service completed default 13:54:07.230096+1000 Setup Could not retrieve cloud configuration. Error: <Error domain: MCCloudConfigErrorDomain, code 33001>\ Feedback raised along with screenshot and console logs as well : FB17785513. Please analyse this issue and reply back to us.

We are currently working on a SCEP server implementation that operates in FIPS-approved mode. In this mode, RSA PKCS#1 v1.5 encryption is disallowed due to compliance requirements, and only FIPS-approved padding schemes such as RSA-OAEP are permitted. However, we have observed that the SCEP client functionality on Apple devices currently does not support RSA-OAEP for CMS EnvelopedData decryption. This creates a challenge for us in ensuring FIPS compliance while maintaining compatibility with Apple devices during certificate enrollment through SCEP. We would appreciate your guidance on the following: Are there any alternative FIPS-approved encryption algorithms or configurations supported by Apple devices for SCEP CMS EnvelopedData decryption? Is there any plan or timeline for future support of RSA-OAEP on Apple platforms for this use case? Feedback raised along with sysdiagnose logs as well : FB17655410

Question 1: After NetworkExtension is installed, when the software receives a pushed uninstall command, it needs to download the entire software but fails to uninstall this NetworkExtension. Are there any solutions? Question 2: How can residual, uninstalled NetworkExtensions be cleaned up when SIP (System Integrity Protection) is enabled?

On a supervised device running iOS 18 without any AirDrop restrictions applied, when a profile with allowListedAppBundleIDs restriction key is installed, the AirDrop sound plays. But still the accept prompt does not appear, making it impossible to accept files. The prompt works as expected on iOS 18 devices to which the allowListedAppBundleIDs restriction is not installed. This issue occurs only on supervised iOS 18 devices to which the allowListedAppBundleIDs restriction is being applied. Device must be in iOS 18 version > Install the (allowListedAppBundleIDs restriction) profile with the device > Try to AirDrop files to the managed device. The expected result is that the accept prompt must pop up but it does not appear. This issue is occurring irrespective of any Whitelisted bundle ID being added to the allowListedAppBundleIDs restriction profile. Have attached a few Whitelisted bundle ID here com.talentlms.talentlms.ios.beta, com.maxaccel.safetrack, com.manageengine.mdm.iosagent, com.apple.weather, com.apple.mobilenotes, gov.dot.phmsa.erg2, com.apple.calculator, com.manageengine.mdm.iosagent, com.apple.webapp, com.apple.CoreCDPUI.localSecretPrompt etc. Have raised a Feedback request (FB15709399) with sysdiagnose logs and a short video on the issue.

There could be a case where-in multiple transparent proxies might exist in the system (for ex., Cisco AnyConnect, GlobalProtect, etc). We want to know if there is a way to order transparent proxies so that the desired transparent proxy gets the request first. During our research, we found a resource which talks about ordering transparent proxies through MDM. https://developer.apple.com/documentation/devicemanagement/vpn/transparentproxy Using this reference, we tried to create a profile and push it through JAMF. Below is the profile that we created and pushed with JAMF. Property List - &lt;?xml version="1.0" encoding="UTF-8"?&gt; &lt;!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"&gt; &lt;plist version="1.0"&gt; &lt;dict&gt; &lt;key&gt;TransparentProxy&lt;/key&gt; &lt;array&gt; &lt;dict&gt; &lt;key&gt;ProviderBundleIdentifier&lt;/key&gt; &lt;string&gt;com.paloaltonetworks.GlobalProtect.client.extension&lt;/string&gt; &lt;key&gt;Order&lt;/key&gt; &lt;string&gt;1&lt;/string&gt; &lt;/dict&gt; &lt;dict&gt; &lt;key&gt;ProviderBundleIdentifier&lt;/key&gt; &lt;string&gt;com.cisco.anyconnect.macos.acsockext&lt;/string&gt; &lt;key&gt;Order&lt;/key&gt; &lt;string&gt;2&lt;/string&gt; &lt;/dict&gt; &lt;dict&gt; &lt;key&gt;ProviderBundleIdentifier&lt;/key&gt; &lt;string&gt;com.mydomain.transparentproxy&lt;/string&gt; &lt;key&gt;Order&lt;/key&gt; &lt;string&gt;3&lt;/string&gt; &lt;/dict&gt; &lt;/array&gt; We are not sure if this is the right way to create the profile, though JAMF is not throwing any error while pushing this profile. We see this profile on the local machine as "/Library/Managed Preferences/com.apple.networking.vpn-transparent-list.plist". Is there a way to know if the profile took effect and the order of transparent proxies has changed. Thanks in advance.

Hello, I am writing a NetworkExtension VPN using custom protocol and our client would like to able to use 5G network slice on the VPN, is this possible at all? From Apple's documentation, I found the following statement: If both network slicing and VPN are configured for an app or device, the VPN connection takes precedence over the network slice, rendering the network slice unused. Is it possible to assign a network slice on a NetworkExtension-based VPN and let the VPN traffic uses the assign network slice? Many thanks

Hello, I’ve run into an issue with a configuration profile on my supervised iPhone. I’m wondering if anyone here might be able to help? The profile contains the allowListedAppBundleIDs key within the restrictions payload. My Apple Watch is paired with the iPhone. The iPhone was supervised manually with Apple Configurator, hence the Apple Watch has not been directly supervised itself. The profile works completely as expected when installed on the phone. As soon as the profile is installed on the iPhone, I can witness the apps on the Apple Watch rearrange themselves as some apps are hidden. So clearly the profile is applying its restrictions to the Apple Watch to some degree. My issue however is that apps listed in the whitelist are hidden from the Watch. The apps that are missing from my Watch are Walkie Talkie, Find My Items, Find My Friends, Messages, Alarm, Remote, Now Playing, Sleep, Meditation and Heart Rate. This is despite the following bundle IDs being listed in the whitelist array: com.apple.findmy.findpeople, com.apple.findmy.finddevices, com.apple.HeartRate, com.apple.SessionTrackerApp, com.apple.NanoWorldClock, com.apple.findmy.finditems, com.apple.Mind, com.apple.NanoOxygenSaturation, com.apple.watchmemojieditor com.apple.NanoSleep com.apple.NanoNowPlaying com.apple.noise com.apple.tincan com.apple.NanoRemote com.apple.NanoAlarm com.apple.private.NanoTimer com.apple.NanoStopwatch I’ve done some testing, but not sure what I’ve found really. I’ve so far identified 3 scenarios. Scenario 1: I have the whitelist profile installed on the iPhone. I download an app that appears in the whitelist from my watch (or at least its iPhone version does). The apps show up on the iPhone automatically and can be launched there. These apps cannot be launched on the watch. Scenario 2: I downloaded a few apps to my watch, that didn’t automatically install on my iPhone at the same time. They were on the whitelist. These ones couldn’t be launched from my Watch. I then downloaded them to the iPhone and they could be launched there (since they were on the whitelist). Scenario 3: A couple of 3rd party apps on the whitelist could be downloaded and launched from the watch with the whitelist installed. It seems as though there are different kinds of Apple Watch app and this is what I’ve read elsewhere. First of all there are Watch-only apps, which do not automatically install a companion iPhone app. Secondly there are companion apps, which when installed from the Watch App Store download their companion app to the iPhone in the background. Someone please correct me - I’m bound to be overlooking something here. So maybe the apps that when installed from Watch automatically install on iPhone and can only be launched from the iPhone have a separate bundle ID for their Watch app which I haven’t included? Apps that are on the whitelist AND do not automatically install an iPhone app AND can be launched from the Watch, include: solstice What3words So maybe these do not need a companion app, but have the same Bundle ID as their iPhone app? However, I’m still not sure why many stock Apple Watch apps are missing from the Watch…. The most obvious answer is that I’ve got their Bundle IDs wrong, but I don’t think I have given I extracted the bundle IDs from the App Store pages of the Apple WatchOS apps. I noticed at this Apple Support page (https://support.apple.com/en-gb/guide/deployment/dep34c5cd30f/1/web/1.0) that there is no mention of whitelisting or blacklisting apps on WatchOS using MDM, yet something definitely happens on the watch when the configuration profile is installed on the iPhone. Furthermore, if I tap on a configuration profile, which comprises a blacklist, on my iPhone it will ask me if I want to install it on the iPhone or Watch. The same pop-up question doesn’t happen when the profile contains a whitelist. All this to say, I’m massively confused as to why I can’t get this working. I’d really appreciate anyone’s advice which is bound to be expert. Thank you

Hi all, I'm implementing Intune MAM to secure applications on iOS. However, I need my users to be able to save files (e.g. attachments in an email in the Outlook app) to iOS Files. To do so, I'm trying to put Files in exception of my Intune MAM policy and I need to obtain the Files "CFBundleURLSchemes" value from the info.plist file of the Files app. I'm not able to get that information. Are any of you able to get that somehow? Thanks!

I have a project that need to get serial number and network SSID. I have looking anywhere to get those 2 value but no luck to find it. is there anyway i can get those information from the device?

Hello together, I'm currently trying to implement a simple way to use the new LOM commands for our new mac infrastructure. My MDM sollution is a custom instance of MicroMDM. MDM profiles are working fine, but when I send a https://developer.apple.com/documentation/devicemanagement/lom_device_request_command with any command (Reset, PowerON, PowerOFF), then it doesn't reset/restart/start the target Mac. Host X has a device profile and host Y a controller profile. Host/Mac Y = fe80::YYYY:YYYY:YYYY:8608 Host/Mac X = fe80::XX:XXXX:XXXX:cfab Now, if I send a LOM request for Mac Y to reset Mac X, I get the error "Address already in use" on Mac X (logs via log stream) log stream (private logs) And wireshark on Mac X shows there is traffic, but MacX does not respond to anything, not even tcp syn packages. This error is really weird, because there are no special ports running on that mac and I don't know what Port lightsoutmanagementd tries to listen to. lsof | grep LISTEN | grep -i ipv6 launchd 1 root 7u IPv6 0x457f571ac3303fd7 0t0 TCP *:ssh (LISTEN) launchd 1 root 11u IPv6 0x457f571ac33015d7 0t0 TCP *:rfb (LISTEN) launchd 1 root 27u IPv6 0x457f571ac3303fd7 0t0 TCP *:ssh (LISTEN) lightsout 112 root 4u IPv6 0x457f571ac3302ad7 0t0 TCP *:55555 (LISTEN) kdc 143 root 5u IPv6 0x457f571ac33023d7 0t0 TCP *:kerberos (LISTEN) screensha 403 root fp.u IPv6 0x457f571ac33015d7 0t0 TCP *:rfb (LISTEN) (fileport=0x2103) screensha 403 root 3u IPv6 0x457f571ac33015d7 0t0 TCP *:rfb (LISTEN) ARDAgent 535 devops 9u IPv6 0x457f571ac33031d7 0t0 TCP *:net-assistant (LISTEN) Did anyone have the same problem, or maybe can hint me in the right direction? I currently don't have a clue, what I can do next.

Issue Description: Apps that support both iOS and tvOS can have different versions in App Store for each type(iOS and tvOS) but same Bundle Identifier and iTunesStoreID/trackID. For example, the iOS version of YouTube has the latest version in App Store as 17.30.3 the tvOS version of YouTube has the latest version in App Store as 2.07.01 This can be verified from two by two specific iTunes look Up API as shown below https://itunes.apple.com/lookup?id=544007664 https://itunes.apple.com/lookup?id=544007664&entity=tvSoftware Sample contentMetadataLookup URL: https://uclient-api.itunes.apple.com/WebObjects/MZStorePlatform.woa/wa/lookup?version=2&id=544007664&p=mdm-lockup&caller=MDM&platform=enterprisestore&cc=us&l=en Queries: What should we do to get the tvOS specific version of an app in contentMetadataLookup URL? The trackViewURL doesn't show tvOS specific version history of the app - https://apps.apple.com/us/app/youtube-watch-listen-stream/id544007664?platform=appleTV . How should we view this the apps' tvOS specific version history? Kindly help us with the queries.