Network connections send and receive data using transport and security protocols.

Posts under Network tag

200 Posts

Post

Replies

Boosts

Views

Activity

Does Apple’s Wi‑Fi Aware data communication use IPv6?
The Wi‑Fi Alliance’s Wi‑Fi Aware data communication uses IPv6. However, in Chapter 53 “Wi‑Fi Aware” of the Accessory Design Guidelines for Apple Devices, Release R26, it is stated that “The Neighbor Discovery Protocol (NDP) for IPv6 address resolution is not supported.” This has caused confusion among developers: Does Apple’s Wi‑Fi Aware data communication actually use IPv6? What is the impact of “The Neighbor Discovery Protocol (NDP) for IPv6 address resolution is not supported” in Apple’s implementation?
1
0
176
Aug ’25
HTTPS Connection Issues Following iOS 26 Beta 6 Update
Hi. We are writing to report a critical issue we've encountered following the recent release of iOS 26 beta 6. After updating our test devices, we discovered that our application is no longer able to establish HTTPS connections to several of our managed FQDNs. This issue was not present in beta 5 and appears to be a direct result of changes introduced in beta 6. The specific FQDNs that are currently unreachable are: d.socdm.com i.socdm.com tg.scodm.com We have reviewed the official iOS & iPadOS 26 Beta 6 Release Notes, particularly the updates related to TLS. While the notes mention changes, we have confirmed that our servers for all affected FQDNs support TLS 1.2, so we believe they should still be compliant. We have also investigated several of Apple's support documents regarding TLS connection requirements (e.g., HT214774, HT214041), but the information does not seem to apply to our situation, and we are currently unable to identify the root cause of this connection failure. https://support.apple.com/en-us/102028 https://support.apple.com/en-us/103214 Although we hope this issue might be resolved in beta 7 or later, the official release is fast approaching, and this has become a critical concern for us. Could you please provide any advice or insight into what might be causing this issue? Any guidance on potential changes in the networking or security frameworks in beta 6 that could affect TLS connections would be greatly appreciated. We have attached the relevant code snippet that triggers the error, along with the corresponding Xcode logs, for your review. Thank you for your time and assistance. #import "ViewController.h" @interface ViewController () @end @implementation ViewController - (void)viewDidLoad { [super viewDidLoad]; NSURL *url = [NSURL URLWithString:@"https://i.socdm.com/sdk/js/adg-script-loader-b-stg.js"]; NSMutableURLRequest *req = [NSMutableURLRequest requestWithURL:url cachePolicy:NSURLRequestReloadIgnoringLocalCacheData timeoutInterval:30.0]; [self sendWithRequest:req completionHandler:^(NSData *_Nullable data, NSHTTPURLResponse *_Nonnull response, NSError *_Nullable error) { if (error){ NSLog(@"Error occurred: %@", error.localizedDescription); return; }else{ NSLog(@"Success! Status Code: %ld", (long)response.statusCode); } }]; } - (void) sendWithRequest:(NSMutableURLRequest *)request completionHandler:(void (^ _Nullable)(NSData *_Nullable data, NSHTTPURLResponse *response, NSError *_Nullable error))completionHandler { NSURLSessionConfiguration *configuration = [NSURLSessionConfiguration defaultSessionConfiguration]; NSURLSession *session = nil; session = [NSURLSession sessionWithConfiguration:configuration delegate:self delegateQueue:nil]; NSURLSessionTask *task = [session dataTaskWithRequest:request completionHandler:^(NSData *data, NSURLResponse *response, NSError *error) { [session finishTasksAndInvalidate]; NSHTTPURLResponse *httpResponse = (NSHTTPURLResponse *) response; if (error) { if (completionHandler) { completionHandler(nil, httpResponse, error); } } else { if (completionHandler) { completionHandler(data, httpResponse, nil); } } }]; [task resume]; } @end error Connection 1: default TLS Trust evaluation failed(-9807) Connection 1: TLS Trust encountered error 3:-9807 Connection 1: encountered error(3:-9807) Task <C50BB081-E1DA-40FF-A1E5-A03A2C4CB733>.<1> HTTP load failed, 0/0 bytes (error code: -1202 [3:-9807]) Task <C50BB081-E1DA-40FF-A1E5-A03A2C4CB733>.<1> finished with error [-1202] Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “i.socdm.com” which could put your confidential information at risk." UserInfo={NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, _kCFStreamErrorDomainKey=3, NSErrorPeerCertificateChainKey=( "<cert(0x10621ca00) s: *.socdm.com i: GlobalSign RSA OV SSL CA 2018>", "<cert(0x106324e00) s: GlobalSign RSA OV SSL CA 2018 i: GlobalSign>" ), NSErrorClientCertificateStateKey=0, NSErrorFailingURLKey=https://i.socdm.com/sdk/js/adg-script-loader-b-stg.js, NSErrorFailingURLStringKey=https://i.socdm.com/sdk/js/adg-script-loader-b-stg.js, NSUnderlyingError=0x1062bf960 {Error Domain=kCFErrorDomainCFNetwork Code=-1202 "(null)" UserInfo={_kCFStreamPropertySSLClientCertificateState=0, kCFStreamPropertySSLPeerTrust=<SecTrustRef: 0x10609d140>, _kCFNetworkCFStreamSSLErrorOriginalValue=-9807, _kCFStreamErrorDomainKey=3, _kCFStreamErrorCodeKey=-9807, kCFStreamPropertySSLPeerCertificates=( "<cert(0x10621ca00) s: *.socdm.com i: GlobalSign RSA OV SSL CA 2018>", "<cert(0x106324e00) s: GlobalSign RSA OV SSL CA 2018 i: GlobalSign>" )}}, _NSURLErrorRelatedURLSessionTaskErrorKey=( "LocalDataTask <C50BB081-E1DA-40FF-A1E5-A03A2C4CB733>.<1>" ), _kCFStreamErrorCodeKey=-9807, _NSURLErrorFailingURLSessionTaskErrorKey=LocalDataTask <C50BB081-E1DA-40FF-A1E5-A03A2C4CB733>.<1>, NSURLErrorFailingURLPeerTrustErrorKey=<SecTrustRef: 0x10609d140>, NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “i.socdm.com” which could put your confidential information at risk.} Error occurred: The certificate for this server is invalid. You might be connecting to a server that is pretending to be “i.socdm.com” which could put your confidential information at risk. 折りたたむ
11
1
1.7k
Sep ’25
Domain=kCFErrorDomainCFNetwork Code=-1009 "(null)"如何解决
我的完整报错信息: Task &lt;0568A3A0-A40C-42A8-9491-2FC52D71EFFF&gt;.&lt;4&gt; finished with error [-1009] Error Domain=NSURLErrorDomain Code=-1009 "似乎已断开与互联网的连接。" UserInfo={_kCFStreamErrorCodeKey=50, NSUnderlyingError=0x107db5590 {Error Domain=kCFErrorDomainCFNetwork Code=-1009 "(null)" UserInfo={_kCFStreamErrorDomainKey=1, _kCFStreamErrorCodeKey=50, _NSURLErrorNWResolutionReportKey=Resolved 0 endpoints in 1ms using unknown from cache, _NSURLErrorNWPathKey=unsatisfied (Denied over Wi-Fi interface), interface: en0[802.11], ipv4, dns, uses wifi}}, _NSURLErrorFailingURLSessionTaskErrorKey=LocalDataTask &lt;0568A3A0-A40C-42A8-9491-2FC52D71EFFF&gt;.&lt;4&gt;, _NSURLErrorRelatedURLSessionTaskErrorKey=( "LocalDataTask &lt;0568A3A0-A40C-42A8-9491-2FC52D71EFFF&gt;.&lt;4&gt;" ), NSLocalizedDescription=似乎已断开与互联网的连接。, NSErrorFailingURLStringKey=https://sharkserver.dypc.top/shark_user/login, NSErrorFailingURLKey=https://sharkserver.dypc.top/shark_user/login, _kCFStreamErrorDomainKey=1} 请求失败:似乎已断开与互联网的连接。 以下是问题的具体描述 我的A手机(15pro max 版本18,6,1) 使用xcode直接在A手机上运行我的程序 尝试发起post请求的时候得到了该报错。 我做了以下尝试 1.检查了A手机网络,一切正常,浏览器和其他app均可正常访问网络 2.检查了A手机上我的app权限,确认我因为为我的程序打开了无线网络和蜂窝流量 3.重启A手机,还原A手机网络设置,还原A手机所有设置,重启mac电脑 以上做法均无效,依旧报上面的错误 4.然后我尝试使用B手机(iPhone13 版本18.5)安装该程序 ,B手机可以正常运行并成功发起post请求,证明我的代码没有问题 5.我将代码上传至testfight 然后使用A手机下载testfight里的该程序 ,程序可以成功发起post请求没有任何错误,我再次使用xcode运行该程序到真机,又得到了Code=-1009错误 无法发起post请求
1
0
239
Aug ’25
Wi-Fi Aware: During the process of establishing a NAN data path between Android and Apple, why doesn’t Apple respond to the NDP response?
Our goal is to establish a Wi‑Fi Aware data path (NDP) between Apple and Android devices. Apple will act as the Publisher, and Android will act as the Subscriber. Apple-to-Android pairing has already been completed. The Android device can be normally displayed on the Apple official Wi-Fi Aware Sample. However, the indicator is not green. During pairing, the Apple log shows: state: authenticated, and the Android side triggers the callback onPairingSetupSucceeded. During pairing verification, the Apple log shows: state: authenticated, and the Android side triggers the callback onPairingVerificationSucceed. The Android side sends an NDP request to Apple (as shown in the figure 1), but Apple does not reply. Note: Qualcomm’s NDI and NMI are different. In addition, after Apple-to-Apple pairing is completed, the paired device will be recorded in “Settings → Privacy &amp; Security → Paired Devices”. However, after Android-to-Apple pairing is completed, the device is not saved to this list. My iPhone model: iPhone 13, iOS 26.0 (23A5287g).
2
0
336
Aug ’25
Apple-Android pairing via Wi-Fi Aware is close to success, but the paird device was not successfully saved to disk
After Apple-to-Apple pairing is completed, the paired device will be recorded in “Settings → Privacy &amp; Security → Paired Devices”. However, after Android-to-Apple pairing is completed, the device is not saved to this list. Android device can be normally displayed on the Apple official Wi-Fi Aware Sample. However, the indicator is not green. During pairing, the Apple log shows: state: authenticated, and the Android side triggers the callback onPairingSetupSucceeded. During pairing verification, the Apple log shows: state: authenticated, and the Android side triggers the callback onPairingVerificationSucceed. My iPhone is iPhone 13, iOS 26.0 (23A5287g)
1
0
266
Aug ’25
What is the best way to retrieve data from a server
Hello, I am new to App development, so I am looking for some advice. I want to develop an app for iPhone, which downloads files (pdf, jpg)from a server to the local storage. I also want to get data from the server to be used in my app. This could be a database access or just simple xml files. I want a secure access based on userid and password. Since in a later version, my app should also run on Android Phones, I am reluctant to use iCloud. I was thinking sftp, but that does not seem to be supported for iOS.
4
0
102
Aug ’25
Disable QUIC/HTTP3 support for specific MacOS application
Hello, I am currently investigating if we can disable usage of QUIC on application level. I know we can set enable_quic from /Library/Preferences/com.apple.networkd.plist to false but it will have a global impact since this is a system file, all the applications on machine will stop using QUIC. I don't want that. What i am looking for is to disable QUIC only for my application. Is there any way i can modify URLSession object in my application and disable QUIC? or modify URLSessionConfiguration so system will not use QUIC?
3
0
248
Aug ’25
Java remote debugging stymied by connection refused on local network
I am trying to setup remote Java debugging between two machines running macOS (15.6 and 26). I am able to get the Java program to listen on a socket. However, I can connect to that socket only from the same machine, not from another machine on my local network. I use nc to test the connection. It reports Connection refused when trying to connect from the other machine. This issue sounds like it could be caused by the Java program lacking Local Network system permission. I am familiar with that issue arising when a program attempts to connect to a port on the local network. In that case, a dialog is displayed and System Settings can be used to grant Local Network permission to the client program. I don't know whether the same permission is required on the program that is receiving client requests. If it is, then I don't know how to grant that permission. There is no dialog, and System Settings does not provide any obvious way to grant permission to a program that I specify. Note that a Java application is a program run by the java command, not a bundled application. The java command contains a hard-wired Info.plist which, annoyingly, requests permission to use the microphone, but not Local Network access.
5
1
449
Aug ’25
How to avoid the "Allow XYZ to find devices on local networks" warning when creating a local-system-only Bonjour service and browser?
I'm writing an application that implements a Bonjour service and browser for the purpose of connecting to Logic Pro and interacting with a MIDI Device Script. Because it's connecting to Logic Pro running on the same system as the application, the service and browser do not need to access anything else on the local network. I'm creating the service and browser with calls like this: err = DNSServiceRegister( &serviceRef, 0, kDNSServiceInterfaceIndexLocalOnly, "MyService", "_osc._udp", "local", nullptr, 52854, txtLen, txtRecord, static_cast<DNSServiceRegisterReply>(myCallback), context ); err = DNSServiceBrowse( &browserRef, 0, kDNSServiceInterfaceIndexLocalOnly, "_osc._udp", nullptr, static_cast<DNSServiceBrowseReply>(browserCallback), context ); Despite the fact that I'm passing in kDNSServiceInterfaceIndexLocalOnly for the network interface, it still triggers an "Allow 'Application' to find devices on local networks?" permissions prompt. How can I avoid that prompt? It is both a significant failure point (in case users don't notice it or click 'Don't Allow' by mistake) but it may also scare them away, since it strongly implies my application is scanning devices on the local network, even though it's doing no such thing!
1
0
274
Aug ’25
During the Wi-Fi Aware's pairing process, Apple is unable to recognize the follow-up PMF sent by Android.
iPhone 12 pro with iOS 26.0 (23A5276f) App: https://developer.apple.com/documentation/wifiaware/building-peer-to-peer-apps We aim to use Wi-Fi Aware to establish file transfer between Android and Apple devices. Apple will act as the Publisher, and Android will act as the Subscriber. According to the pairing process outlined in the Wi-Fi Aware protocol (Figure 49 in the Wi-Fi Aware 4.0 specification), the three PASN Authentication frames have been successfully exchanged. Subsequently, Android sends the encrypted Follow-up PMF to Apple, but the Apple log shows: Failed to parse event. Please refer to the attached complete log. We request Apple to provide a solution. apple Log-20250808a.txt
10
1
1.4k
Aug ’25
Ultra-Constrained networks and URLSession
When setting new entitlements com.apple.developer.networking.carrier-constrained.appcategory and com.apple.developer.networking.carrier-constrained.app-optimized, I have a question about how URLSession should behave. I notice we have a way to specify whether a Network connection should allow ultra-constrained paths via NWParameters allowUltraConstrainedPaths: https://developer.apple.com/documentation/network/nwparameters/allowultraconstrainedpaths There does not appear to be a similar property on URLSessionConfiguration. In an ultra-constrained (eg. satellite) network, should we expect all requests made through an URLSession to fail? Does all network activity when ultra-constrained need to go through a NWConnection or NetworkConnection specifically configured with allowUltraConstrainedPaths, or can URLSession ever be configured to allow ultra-constrained paths?
3
0
422
Jan ’26
Downloading folder having large files times out
I have FileProvider based MacOS application, where user is trying to copy the folder having mix of small and large files. Large files are having size ~ 1.5 GB from FileProvider based drive to locally on Desktop. Since the folder was on cloud and not downloaded the copy action triggered the download. Small files were downloaded successfully however during large file download the URLSession timed out. We are using default timeout for URLSession which is 1 min. I tried to capture logs Console.app where i found FileProvider daemon errors. PFA Solutions tried so far: Increased timeout for URLSession from 5 to 10 mins - configuration.timeoutIntervalForRequest Set timeout for resource - configuration.timeoutIntervalForResource It happens when we have low network bandwidth. Network connectivity is there but the bandwidth is low. Any clue by looking at these errors?
1
0
170
Aug ’25
Prevent SSL Handshake with User Installed Certificates
how can I prevent handshake when certificate is user installed for example if user is using Proxyman or Charles proxy and they install their own certificates now system is trusting those certificates I wanna prevent that, and exclude those certificates that are installed by user, and accept the handshake if CA certificate is in a real valid certificate defined in OS I know this can be done in android by setting something like <network-security-config> <base-config> <trust-anchors> <certificates src="system" /> </trust-anchors> </base-config> </network-security-config>
4
1
181
Aug ’25
Information on macOS tracking/updating of CRLs
With Let's Encrypt having completely dropped support for OCSP recently [1], I wanted to ask if macOS has a means of keeping up to date with their CRLs and if so, roughly how often this occurs? I first observed an issue where a revoked-certificate test site, "revoked.badssl.com" (cert signed by Let's Encrypt), was not getting blocked on any browser, when a revocation policy was set up using the SecPolicyCreateRevocation API, in tandem with the kSecRevocationUseAnyAvailableMethod and kSecRevocationPreferCRL flags. After further investigation, I noticed that even on a fresh install of macOS, Safari does not block this test website, while Chrome and Firefox (usually) do, due to its revoked certificate. Chrome and Firefox both have their own means of dealing with CRLs, while I assume Safari uses the system Keychain and APIs. I checked cert info for the site here [2]. It was issued on 2025-07-01 20:00 and revoked an hour later. [1] https://letsencrypt.org/2024/12/05/ending-ocsp/ [2] https://www.ssllabs.com/ssltest/analyze.html?d=revoked.badssl.com
2
0
420
Sep ’25
NWPathMonitor Reports Unexpected satisfied→unsatisfied→satisfied Sequence After WiFi Re-enablement
I am developing an iOS application using NWPathMonitor for network connectivity monitoring. We discovered a reproducible issue where disabling and re-enabling WiFi triggers an unexpected network status sequence. ENVIRONMENT: iOS Version: 17.x Device: iPhone (various models tested) Network Framework: NWPathMonitor from iOS Network framework STEPS TO REPRODUCE: Device connected to WiFi normally Disable WiFi via Settings or Control Center Re-enable WiFi via Settings or Control Center EXPECTED BEHAVIOR: WiFi reconnects and NWPathMonitor reports stable satisfied status ACTUAL BEHAVIOR: T+0s: WiFi re-enables, NWPathMonitor reports path.status = .satisfied T+8s: NWPathMonitor unexpectedly reports path.status = .unsatisfied with unsatisfiedReason = .notAvailable T+9-10s: NWPathMonitor reports path.status = .satisfied again Connection becomes stable afterward NETWORK PATH TIMELINE: T+0s: satisfied (IPv4: true, DNS: false) T+140ms: satisfied (IPv4: true, DNS: true) T+8.0s: unsatisfied (reason: notAvailable, no interfaces available) T+10.0s: satisfied (IPv4: true, DNS: true) KEY OBSERVATIONS: Timing consistency: unsatisfied event always occurs ~8 seconds after reconnection resolution: "Reset Network Settings" eliminates this behavior TECHNICAL QUESTIONS: What causes the 8-second delayed unsatisfied status after WiFi re-enablement? Is this expected behavior that applications should handle? Why does reset network setting in iPhone fix this issue?
1
0
114
Jul ’25
Does Apple’s Wi‑Fi Aware data communication use IPv6?
The Wi‑Fi Alliance’s Wi‑Fi Aware data communication uses IPv6. However, in Chapter 53 “Wi‑Fi Aware” of the Accessory Design Guidelines for Apple Devices, Release R26, it is stated that “The Neighbor Discovery Protocol (NDP) for IPv6 address resolution is not supported.” This has caused confusion among developers: Does Apple’s Wi‑Fi Aware data communication actually use IPv6? What is the impact of “The Neighbor Discovery Protocol (NDP) for IPv6 address resolution is not supported” in Apple’s implementation?
Replies
1
Boosts
0
Views
176
Activity
Aug ’25
createTCPConnectionThroughTunnel
In Low Power Mode or after the iPhone has been idle, On-Demand rules fire and StartTunnel runs. Subsequent calls to createTCPConnectionThroughTunnel intermittently fail with an error. Is NetworkExtension known to behave differently under Low Power Mode that might cause this?
Replies
3
Boosts
0
Views
90
Activity
Aug ’25
The NMI and NDI of Apple Wi Fi Aware are the same MAC address
But the NMI and NDI of Samsung's Wi Fi Aware are not the same MAC address. May I ask Apple engineers why they are different from Samsung?
Replies
6
Boosts
0
Views
177
Activity
Aug ’25
HTTPS Connection Issues Following iOS 26 Beta 6 Update
Hi. We are writing to report a critical issue we've encountered following the recent release of iOS 26 beta 6. After updating our test devices, we discovered that our application is no longer able to establish HTTPS connections to several of our managed FQDNs. This issue was not present in beta 5 and appears to be a direct result of changes introduced in beta 6. The specific FQDNs that are currently unreachable are: d.socdm.com i.socdm.com tg.scodm.com We have reviewed the official iOS & iPadOS 26 Beta 6 Release Notes, particularly the updates related to TLS. While the notes mention changes, we have confirmed that our servers for all affected FQDNs support TLS 1.2, so we believe they should still be compliant. We have also investigated several of Apple's support documents regarding TLS connection requirements (e.g., HT214774, HT214041), but the information does not seem to apply to our situation, and we are currently unable to identify the root cause of this connection failure. https://support.apple.com/en-us/102028 https://support.apple.com/en-us/103214 Although we hope this issue might be resolved in beta 7 or later, the official release is fast approaching, and this has become a critical concern for us. Could you please provide any advice or insight into what might be causing this issue? Any guidance on potential changes in the networking or security frameworks in beta 6 that could affect TLS connections would be greatly appreciated. We have attached the relevant code snippet that triggers the error, along with the corresponding Xcode logs, for your review. Thank you for your time and assistance. #import "ViewController.h" @interface ViewController () @end @implementation ViewController - (void)viewDidLoad { [super viewDidLoad]; NSURL *url = [NSURL URLWithString:@"https://i.socdm.com/sdk/js/adg-script-loader-b-stg.js"]; NSMutableURLRequest *req = [NSMutableURLRequest requestWithURL:url cachePolicy:NSURLRequestReloadIgnoringLocalCacheData timeoutInterval:30.0]; [self sendWithRequest:req completionHandler:^(NSData *_Nullable data, NSHTTPURLResponse *_Nonnull response, NSError *_Nullable error) { if (error){ NSLog(@"Error occurred: %@", error.localizedDescription); return; }else{ NSLog(@"Success! Status Code: %ld", (long)response.statusCode); } }]; } - (void) sendWithRequest:(NSMutableURLRequest *)request completionHandler:(void (^ _Nullable)(NSData *_Nullable data, NSHTTPURLResponse *response, NSError *_Nullable error))completionHandler { NSURLSessionConfiguration *configuration = [NSURLSessionConfiguration defaultSessionConfiguration]; NSURLSession *session = nil; session = [NSURLSession sessionWithConfiguration:configuration delegate:self delegateQueue:nil]; NSURLSessionTask *task = [session dataTaskWithRequest:request completionHandler:^(NSData *data, NSURLResponse *response, NSError *error) { [session finishTasksAndInvalidate]; NSHTTPURLResponse *httpResponse = (NSHTTPURLResponse *) response; if (error) { if (completionHandler) { completionHandler(nil, httpResponse, error); } } else { if (completionHandler) { completionHandler(data, httpResponse, nil); } } }]; [task resume]; } @end error Connection 1: default TLS Trust evaluation failed(-9807) Connection 1: TLS Trust encountered error 3:-9807 Connection 1: encountered error(3:-9807) Task <C50BB081-E1DA-40FF-A1E5-A03A2C4CB733>.<1> HTTP load failed, 0/0 bytes (error code: -1202 [3:-9807]) Task <C50BB081-E1DA-40FF-A1E5-A03A2C4CB733>.<1> finished with error [-1202] Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “i.socdm.com” which could put your confidential information at risk." UserInfo={NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, _kCFStreamErrorDomainKey=3, NSErrorPeerCertificateChainKey=( "<cert(0x10621ca00) s: *.socdm.com i: GlobalSign RSA OV SSL CA 2018>", "<cert(0x106324e00) s: GlobalSign RSA OV SSL CA 2018 i: GlobalSign>" ), NSErrorClientCertificateStateKey=0, NSErrorFailingURLKey=https://i.socdm.com/sdk/js/adg-script-loader-b-stg.js, NSErrorFailingURLStringKey=https://i.socdm.com/sdk/js/adg-script-loader-b-stg.js, NSUnderlyingError=0x1062bf960 {Error Domain=kCFErrorDomainCFNetwork Code=-1202 "(null)" UserInfo={_kCFStreamPropertySSLClientCertificateState=0, kCFStreamPropertySSLPeerTrust=<SecTrustRef: 0x10609d140>, _kCFNetworkCFStreamSSLErrorOriginalValue=-9807, _kCFStreamErrorDomainKey=3, _kCFStreamErrorCodeKey=-9807, kCFStreamPropertySSLPeerCertificates=( "<cert(0x10621ca00) s: *.socdm.com i: GlobalSign RSA OV SSL CA 2018>", "<cert(0x106324e00) s: GlobalSign RSA OV SSL CA 2018 i: GlobalSign>" )}}, _NSURLErrorRelatedURLSessionTaskErrorKey=( "LocalDataTask <C50BB081-E1DA-40FF-A1E5-A03A2C4CB733>.<1>" ), _kCFStreamErrorCodeKey=-9807, _NSURLErrorFailingURLSessionTaskErrorKey=LocalDataTask <C50BB081-E1DA-40FF-A1E5-A03A2C4CB733>.<1>, NSURLErrorFailingURLPeerTrustErrorKey=<SecTrustRef: 0x10609d140>, NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “i.socdm.com” which could put your confidential information at risk.} Error occurred: The certificate for this server is invalid. You might be connecting to a server that is pretending to be “i.socdm.com” which could put your confidential information at risk. 折りたたむ
Replies
11
Boosts
1
Views
1.7k
Activity
Sep ’25
Domain=kCFErrorDomainCFNetwork Code=-1009 "(null)"如何解决
我的完整报错信息: Task &lt;0568A3A0-A40C-42A8-9491-2FC52D71EFFF&gt;.&lt;4&gt; finished with error [-1009] Error Domain=NSURLErrorDomain Code=-1009 "似乎已断开与互联网的连接。" UserInfo={_kCFStreamErrorCodeKey=50, NSUnderlyingError=0x107db5590 {Error Domain=kCFErrorDomainCFNetwork Code=-1009 "(null)" UserInfo={_kCFStreamErrorDomainKey=1, _kCFStreamErrorCodeKey=50, _NSURLErrorNWResolutionReportKey=Resolved 0 endpoints in 1ms using unknown from cache, _NSURLErrorNWPathKey=unsatisfied (Denied over Wi-Fi interface), interface: en0[802.11], ipv4, dns, uses wifi}}, _NSURLErrorFailingURLSessionTaskErrorKey=LocalDataTask &lt;0568A3A0-A40C-42A8-9491-2FC52D71EFFF&gt;.&lt;4&gt;, _NSURLErrorRelatedURLSessionTaskErrorKey=( "LocalDataTask &lt;0568A3A0-A40C-42A8-9491-2FC52D71EFFF&gt;.&lt;4&gt;" ), NSLocalizedDescription=似乎已断开与互联网的连接。, NSErrorFailingURLStringKey=https://sharkserver.dypc.top/shark_user/login, NSErrorFailingURLKey=https://sharkserver.dypc.top/shark_user/login, _kCFStreamErrorDomainKey=1} 请求失败:似乎已断开与互联网的连接。 以下是问题的具体描述 我的A手机(15pro max 版本18,6,1) 使用xcode直接在A手机上运行我的程序 尝试发起post请求的时候得到了该报错。 我做了以下尝试 1.检查了A手机网络,一切正常,浏览器和其他app均可正常访问网络 2.检查了A手机上我的app权限,确认我因为为我的程序打开了无线网络和蜂窝流量 3.重启A手机,还原A手机网络设置,还原A手机所有设置,重启mac电脑 以上做法均无效,依旧报上面的错误 4.然后我尝试使用B手机(iPhone13 版本18.5)安装该程序 ,B手机可以正常运行并成功发起post请求,证明我的代码没有问题 5.我将代码上传至testfight 然后使用A手机下载testfight里的该程序 ,程序可以成功发起post请求没有任何错误,我再次使用xcode运行该程序到真机,又得到了Code=-1009错误 无法发起post请求
Replies
1
Boosts
0
Views
239
Activity
Aug ’25
Wi-Fi Aware: During the process of establishing a NAN data path between Android and Apple, why doesn’t Apple respond to the NDP response?
Our goal is to establish a Wi‑Fi Aware data path (NDP) between Apple and Android devices. Apple will act as the Publisher, and Android will act as the Subscriber. Apple-to-Android pairing has already been completed. The Android device can be normally displayed on the Apple official Wi-Fi Aware Sample. However, the indicator is not green. During pairing, the Apple log shows: state: authenticated, and the Android side triggers the callback onPairingSetupSucceeded. During pairing verification, the Apple log shows: state: authenticated, and the Android side triggers the callback onPairingVerificationSucceed. The Android side sends an NDP request to Apple (as shown in the figure 1), but Apple does not reply. Note: Qualcomm’s NDI and NMI are different. In addition, after Apple-to-Apple pairing is completed, the paired device will be recorded in “Settings → Privacy &amp; Security → Paired Devices”. However, after Android-to-Apple pairing is completed, the device is not saved to this list. My iPhone model: iPhone 13, iOS 26.0 (23A5287g).
Replies
2
Boosts
0
Views
336
Activity
Aug ’25
Apple-Android pairing via Wi-Fi Aware is close to success, but the paird device was not successfully saved to disk
After Apple-to-Apple pairing is completed, the paired device will be recorded in “Settings → Privacy &amp; Security → Paired Devices”. However, after Android-to-Apple pairing is completed, the device is not saved to this list. Android device can be normally displayed on the Apple official Wi-Fi Aware Sample. However, the indicator is not green. During pairing, the Apple log shows: state: authenticated, and the Android side triggers the callback onPairingSetupSucceeded. During pairing verification, the Apple log shows: state: authenticated, and the Android side triggers the callback onPairingVerificationSucceed. My iPhone is iPhone 13, iOS 26.0 (23A5287g)
Replies
1
Boosts
0
Views
266
Activity
Aug ’25
Wi-Fi Aware Sample APP crashes on iOS 26 beta 6
This is a major issue. After my iPhone 12 Pro was upgraded to iOS 26 beta 6, Apple's official Wi-Fi Aware Sample APP crashed immediately and couldn't be opened. It just force closes. Has any developer encountered this problem?
Replies
4
Boosts
0
Views
212
Activity
Sep ’25
What is the best way to retrieve data from a server
Hello, I am new to App development, so I am looking for some advice. I want to develop an app for iPhone, which downloads files (pdf, jpg)from a server to the local storage. I also want to get data from the server to be used in my app. This could be a database access or just simple xml files. I want a secure access based on userid and password. Since in a later version, my app should also run on Android Phones, I am reluctant to use iCloud. I was thinking sftp, but that does not seem to be supported for iOS.
Replies
4
Boosts
0
Views
102
Activity
Aug ’25
Disable QUIC/HTTP3 support for specific MacOS application
Hello, I am currently investigating if we can disable usage of QUIC on application level. I know we can set enable_quic from /Library/Preferences/com.apple.networkd.plist to false but it will have a global impact since this is a system file, all the applications on machine will stop using QUIC. I don't want that. What i am looking for is to disable QUIC only for my application. Is there any way i can modify URLSession object in my application and disable QUIC? or modify URLSessionConfiguration so system will not use QUIC?
Replies
3
Boosts
0
Views
248
Activity
Aug ’25
Java remote debugging stymied by connection refused on local network
I am trying to setup remote Java debugging between two machines running macOS (15.6 and 26). I am able to get the Java program to listen on a socket. However, I can connect to that socket only from the same machine, not from another machine on my local network. I use nc to test the connection. It reports Connection refused when trying to connect from the other machine. This issue sounds like it could be caused by the Java program lacking Local Network system permission. I am familiar with that issue arising when a program attempts to connect to a port on the local network. In that case, a dialog is displayed and System Settings can be used to grant Local Network permission to the client program. I don't know whether the same permission is required on the program that is receiving client requests. If it is, then I don't know how to grant that permission. There is no dialog, and System Settings does not provide any obvious way to grant permission to a program that I specify. Note that a Java application is a program run by the java command, not a bundled application. The java command contains a hard-wired Info.plist which, annoyingly, requests permission to use the microphone, but not Local Network access.
Replies
5
Boosts
1
Views
449
Activity
Aug ’25
How to avoid the "Allow XYZ to find devices on local networks" warning when creating a local-system-only Bonjour service and browser?
I'm writing an application that implements a Bonjour service and browser for the purpose of connecting to Logic Pro and interacting with a MIDI Device Script. Because it's connecting to Logic Pro running on the same system as the application, the service and browser do not need to access anything else on the local network. I'm creating the service and browser with calls like this: err = DNSServiceRegister( &serviceRef, 0, kDNSServiceInterfaceIndexLocalOnly, "MyService", "_osc._udp", "local", nullptr, 52854, txtLen, txtRecord, static_cast<DNSServiceRegisterReply>(myCallback), context ); err = DNSServiceBrowse( &browserRef, 0, kDNSServiceInterfaceIndexLocalOnly, "_osc._udp", nullptr, static_cast<DNSServiceBrowseReply>(browserCallback), context ); Despite the fact that I'm passing in kDNSServiceInterfaceIndexLocalOnly for the network interface, it still triggers an "Allow 'Application' to find devices on local networks?" permissions prompt. How can I avoid that prompt? It is both a significant failure point (in case users don't notice it or click 'Don't Allow' by mistake) but it may also scare them away, since it strongly implies my application is scanning devices on the local network, even though it's doing no such thing!
Replies
1
Boosts
0
Views
274
Activity
Aug ’25
During the Wi-Fi Aware's pairing process, Apple is unable to recognize the follow-up PMF sent by Android.
iPhone 12 pro with iOS 26.0 (23A5276f) App: https://developer.apple.com/documentation/wifiaware/building-peer-to-peer-apps We aim to use Wi-Fi Aware to establish file transfer between Android and Apple devices. Apple will act as the Publisher, and Android will act as the Subscriber. According to the pairing process outlined in the Wi-Fi Aware protocol (Figure 49 in the Wi-Fi Aware 4.0 specification), the three PASN Authentication frames have been successfully exchanged. Subsequently, Android sends the encrypted Follow-up PMF to Apple, but the Apple log shows: Failed to parse event. Please refer to the attached complete log. We request Apple to provide a solution. apple Log-20250808a.txt
Replies
10
Boosts
1
Views
1.4k
Activity
Aug ’25
Is Apple's Wi-Fi Aware certified by the Wi-Fi Alliance?
Is Apple's Wi-Fi Aware certified by the Wi-Fi Alliance? Is there any non-compliance of Apple's Wi-Fi Aware with the Wi-Fi Alliance standards? Does Apple have a roadmap to switch AWDL to Wi-Fi Aware? Does Apple have plans to adopt Wi-Fi Aware in Mac computers?
Replies
0
Boosts
0
Views
131
Activity
Aug ’25
Ultra-Constrained networks and URLSession
When setting new entitlements com.apple.developer.networking.carrier-constrained.appcategory and com.apple.developer.networking.carrier-constrained.app-optimized, I have a question about how URLSession should behave. I notice we have a way to specify whether a Network connection should allow ultra-constrained paths via NWParameters allowUltraConstrainedPaths: https://developer.apple.com/documentation/network/nwparameters/allowultraconstrainedpaths There does not appear to be a similar property on URLSessionConfiguration. In an ultra-constrained (eg. satellite) network, should we expect all requests made through an URLSession to fail? Does all network activity when ultra-constrained need to go through a NWConnection or NetworkConnection specifically configured with allowUltraConstrainedPaths, or can URLSession ever be configured to allow ultra-constrained paths?
Replies
3
Boosts
0
Views
422
Activity
Jan ’26
Can Apple's Wi-Fi Aware achieve one-to-many concurrent sharing?
Samsung's Quick Share uses Wi-Fi Aware to achieve one-to-many concurrent sharing. Can Apple's Wi-Fi Aware achieve one-to-many concurrent sharing? Apple's AirDrop does support one-to-many concurrent sharing.
Replies
4
Boosts
0
Views
211
Activity
Aug ’25
Downloading folder having large files times out
I have FileProvider based MacOS application, where user is trying to copy the folder having mix of small and large files. Large files are having size ~ 1.5 GB from FileProvider based drive to locally on Desktop. Since the folder was on cloud and not downloaded the copy action triggered the download. Small files were downloaded successfully however during large file download the URLSession timed out. We are using default timeout for URLSession which is 1 min. I tried to capture logs Console.app where i found FileProvider daemon errors. PFA Solutions tried so far: Increased timeout for URLSession from 5 to 10 mins - configuration.timeoutIntervalForRequest Set timeout for resource - configuration.timeoutIntervalForResource It happens when we have low network bandwidth. Network connectivity is there but the bandwidth is low. Any clue by looking at these errors?
Replies
1
Boosts
0
Views
170
Activity
Aug ’25
Prevent SSL Handshake with User Installed Certificates
how can I prevent handshake when certificate is user installed for example if user is using Proxyman or Charles proxy and they install their own certificates now system is trusting those certificates I wanna prevent that, and exclude those certificates that are installed by user, and accept the handshake if CA certificate is in a real valid certificate defined in OS I know this can be done in android by setting something like <network-security-config> <base-config> <trust-anchors> <certificates src="system" /> </trust-anchors> </base-config> </network-security-config>
Replies
4
Boosts
1
Views
181
Activity
Aug ’25
Information on macOS tracking/updating of CRLs
With Let's Encrypt having completely dropped support for OCSP recently [1], I wanted to ask if macOS has a means of keeping up to date with their CRLs and if so, roughly how often this occurs? I first observed an issue where a revoked-certificate test site, "revoked.badssl.com" (cert signed by Let's Encrypt), was not getting blocked on any browser, when a revocation policy was set up using the SecPolicyCreateRevocation API, in tandem with the kSecRevocationUseAnyAvailableMethod and kSecRevocationPreferCRL flags. After further investigation, I noticed that even on a fresh install of macOS, Safari does not block this test website, while Chrome and Firefox (usually) do, due to its revoked certificate. Chrome and Firefox both have their own means of dealing with CRLs, while I assume Safari uses the system Keychain and APIs. I checked cert info for the site here [2]. It was issued on 2025-07-01 20:00 and revoked an hour later. [1] https://letsencrypt.org/2024/12/05/ending-ocsp/ [2] https://www.ssllabs.com/ssltest/analyze.html?d=revoked.badssl.com
Replies
2
Boosts
0
Views
420
Activity
Sep ’25
NWPathMonitor Reports Unexpected satisfied→unsatisfied→satisfied Sequence After WiFi Re-enablement
I am developing an iOS application using NWPathMonitor for network connectivity monitoring. We discovered a reproducible issue where disabling and re-enabling WiFi triggers an unexpected network status sequence. ENVIRONMENT: iOS Version: 17.x Device: iPhone (various models tested) Network Framework: NWPathMonitor from iOS Network framework STEPS TO REPRODUCE: Device connected to WiFi normally Disable WiFi via Settings or Control Center Re-enable WiFi via Settings or Control Center EXPECTED BEHAVIOR: WiFi reconnects and NWPathMonitor reports stable satisfied status ACTUAL BEHAVIOR: T+0s: WiFi re-enables, NWPathMonitor reports path.status = .satisfied T+8s: NWPathMonitor unexpectedly reports path.status = .unsatisfied with unsatisfiedReason = .notAvailable T+9-10s: NWPathMonitor reports path.status = .satisfied again Connection becomes stable afterward NETWORK PATH TIMELINE: T+0s: satisfied (IPv4: true, DNS: false) T+140ms: satisfied (IPv4: true, DNS: true) T+8.0s: unsatisfied (reason: notAvailable, no interfaces available) T+10.0s: satisfied (IPv4: true, DNS: true) KEY OBSERVATIONS: Timing consistency: unsatisfied event always occurs ~8 seconds after reconnection resolution: "Reset Network Settings" eliminates this behavior TECHNICAL QUESTIONS: What causes the 8-second delayed unsatisfied status after WiFi re-enablement? Is this expected behavior that applications should handle? Why does reset network setting in iPhone fix this issue?
Replies
1
Boosts
0
Views
114
Activity
Jul ’25