https://developer.apple.com/forums/thread/707294 General: Forums subtopic: App & System Services > Networking DevForums tag: Network Extension Network Extension framework documentation Routing your VPN network traffic article Filtering traffic by URL sample code Filtering Network Traffic sample code TN3120 Expected use cases for Network Extension packet tunnel providers technote TN3134 Network Extension provider deployment technote TN3165 Packet Filter is not API technote Network Extension and VPN Glossary forums post Debugging a Network Extension Provider forums post Exporting a Developer ID Network Extension forums post Network Extension vs ad hoc techniques on macOS forums post Network Extension Provider Packaging forums post NWEndpoint History and Advice forums post Extra-ordinary Networking forums post Wi-Fi management: Wi-Fi Fundamentals forums post TN3111 iOS Wi-Fi API overview technote How to modernize your captive network developer news post iOS Network Signal Strength forums post See also Networking Resources. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com"

I've been wondering what is the memory limit for network extensions. Specifically, I'm using the NEPacketTunnelProvider extension point.The various posts on this forum mention 5 MB and 6 MB for 32-bit and 64-bit respectively. However I find that (at least on iOS 10) the upper limit seems to be 15 MB. Is this the new memory limit for extensions?

Hey,I want to get nearby Wi-Fi network's SSID into the app using network extension framework.Right now I can get scan list by visiting the setting--->Wifi Screen but I want to get those Scan Result into the app without visiting the setting wifi screen.If anyone idea about it please let me know

I've implemented a VPN app with Packet Tunnel Provider for MacOS and iOS.I have two questions regarding the Extension's sleep/wake functions:1. If the VPN configuration is set with disconnectOnSleep = false, and at the extension I'm sending keep-alives every X seconds, What would happen when the device enters sleep mode? Will it keep sending keep-alive (because the VPN is configured with disconnectOnSleep=false) ?2. If the VPN configuration is set with disconnectOnSleep = true, and also isOnDemandEnabled = true. When the device enters sleep mode, do I need to disconnect the VPN myself? Or the OS would take care of it? And if I should disconnect it myself, the on-demand won't try to turn it on again (because the on-demand) ?

I was wondering if anybody knows if it's possible for an app to use a QR code to join a Wi-Fi network - the same functionality as the iOS 11 Camera app?I have some code reading a QR Code that looks something like - "WIFI:S:name-of-network;T:WPA;P:password;;"This QR code works perfectly in the native camera app - asking the user if they'd like to join the Wi-Fi network and successfully joining if they do.When I scan the QR code in my own code, I get the following error: canOpenURL: failed for URL: "WIFI:S:name-of-network;T:WPA;P:password;;" - error: "The operation couldn’t be completed. (OSStatus error -10814.)"In my app, I've got URL Schemes for "prefs" and have added "wifi" in LSApplicationQueriesSchemes.Am I doing something wrong, or is this simply not possible?If it's not possible, is there anyway to use the iOS native camera functionality within an app?

Hi, I have a problem with my OpenVPN connection on my app with iOS 14.4. I perform my VPN configuration from an oven file, with a NETunnelProviderManager protocol, but when I perform the startVPNTunnel, it starts connecting and immediately disconnects. The error I see in the logs is the following: NESMVPNSession[Primary Tunnel:OpenVPN Client: -----(null)]: status changed to disconnected, last stop reason Plugin was disabled This happens to me when running my app on a physical iPad. Regards import NetworkExtension import OpenVPNAdapter class VPNConnection {          var connectionStatus = "Disconnected"              var myProviderManager: NETunnelProviderManager?          func manageConnectionChanges( manager:NETunnelProviderManager ) - String {         NSLog("Waiting for changes");         var status = "Disconnected"                  NotificationCenter.default.addObserver(forName: NSNotification.Name.NEVPNStatusDidChange, object: manager.connection, queue: OperationQueue.main, using: { notification in                          let baseText = "VPN Status is "                          switch manager.connection.status {             case .connected:                 status = "Connected"             case .connecting:                 status = "Connecting"             case .disconnected:                 status = "Disconnected"             case .disconnecting:                 status = "Disconnecting"             case .invalid:                 status = "Invalid"             case .reasserting:                 status = "Reasserting"             default:                 status = "Connected"             }                          self.connectionStatus = status                          NSLog(baseText+status)                      });         return status     }          func createProtocolConfiguration() - NETunnelProviderProtocol {         guard             let configurationFileURL = Bundle.main.url(forResource: "app-vpn", withExtension: "ovpn"),             let configurationFileContent = try? Data(contentsOf: configurationFileURL)         else {             fatalError()         }                  let tunnelProtocol = NETunnelProviderProtocol()         tunnelProtocol.serverAddress = ""         tunnelProtocol.providerBundleIdentifier = "com.app.ios"                  tunnelProtocol.providerConfiguration = ["ovpn": String(data: configurationFileContent, encoding: .utf8)! as Any]         tunnelProtocol.disconnectOnSleep = false                  return tunnelProtocol     }          func startConnection(completion:@escaping () - Void){         self.myProviderManager?.loadFromPreferences(completionHandler: { (error) in             guard error == nil else {                 // Handle an occurred error                 return             }                          do {                 try self.myProviderManager?.connection.startVPNTunnel()                 print("Tunnel started")             } catch {                 fatalError()             }         })     }          func loadProviderManager(completion:@escaping () - Void) {                           NETunnelProviderManager.loadAllFromPreferences { (managers, error) in             guard error == nil else {                 fatalError()                 return             }                          self.myProviderManager = managers?.first ?? NETunnelProviderManager()             self.manageConnectionChanges(manager: self.myProviderManager!)                          self.myProviderManager?.loadFromPreferences(completionHandler: { (error) in                 guard error == nil else {                     fatalError()                     return                 }                                  let tunnelProtocol = self.createProtocolConfiguration()                                  self.myProviderManager?.protocolConfiguration = tunnelProtocol                 self.myProviderManager?.localizedDescription = "OpenVPN Client Ubic"                                  self.myProviderManager?.isEnabled = true                                  self.myProviderManager?.isOnDemandEnabled = false                                  self.myProviderManager?.saveToPreferences(completionHandler: { (error) in                     if error != nil  {                         // Handle an occurred error                         fatalError()                     }                     self.startConnection {                         print("VPN loaded")                     }                 })             })         }     } }

Aloha. Opening and closing VPN tunnels results in as many utun interfaces as the amount of times the tunnel has been opened. These interfaces stay present and seem to be removed only upon system reboot. We are using the NetworkExtension as a SystemExtension on macOS to create the virtual interfaces. Is this the normal behaviour. Has anybody else experienced this? utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380 inet6 fe80::8038:c353:17cd:c422%utun0 prefixlen 64 scopeid 0xf nd6 options=201<PERFORMNUD,DAD> utun1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000 inet6 fe80::cfb6:1324:d7e9:5d5%utun1 prefixlen 64 scopeid 0x10 nd6 options=201<PERFORMNUD,DAD> utun2: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1300 options=6463<RXCSUM,TXCSUM,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM> utun3: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1300 options=6463<RXCSUM,TXCSUM,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM> utun4: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1300 options=6463<RXCSUM,TXCSUM,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM> utun5: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1300 options=6463<RXCSUM,TXCSUM,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM> utun6: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1300 options=6463<RXCSUM,TXCSUM,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM> utun7: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1300 options=6463<RXCSUM,TXCSUM,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM> utun8: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1300 options=6463<RXCSUM,TXCSUM,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM>

I'm developing a per-app VPN iOS app with Wireguard. For that, I created a configuration file with payload type "com.apple.vpn.managed.applayer". Using the MDM server I installed some apps which need to use the VPN connection. But when I open these apps, I could see the VPN getting enabled in the device. The VPN icon appears on the notification bar but no internet connection. The VPN and internet is working correctly if I change the payload type to "com.apple.vpn.managed" in configuration file.

Our app has a network extension (as I've mentioned lots 😄). We do an upgrade by downloading the new package, stopping & removing all of our components except for the network extension, and then installing the new package, which then loads a LaunchAgent causing the containing app to run. (The only difference between a new install and upgrade is the old extension is left running, but not having anything to tell it what to do, just logs and continues.) On some (but not all) upgrades... nothing ends up able to communicate via XPC with the Network Extension. My simplest cli program to talk to it gets Could not create proxy: Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service named blah was invalidated: failed at lookup with error 3 - No such process." UserInfo={NSDebugDescription=The connection to service named bla was invalidated: failed at lookup with error 3 - No such process.} Could not communicate with blah Restarting the extension by doing a kill -9 doesn't fix it; neither does restarting the control daemon. The only solution we've come across so far is rebooting. I filed FB11086599 about this, but has anyone thoughts about this?

This issue has cropped up many times here on DevForums. Someone recently opened a DTS tech support incident about it, and I used that as an opportunity to post a definitive response here. If you have questions or comments about this, start a new thread and tag it with Network so that I see it. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" iOS Network Signal Strength The iOS SDK has no general-purpose API that returns Wi-Fi or cellular signal strength in real time. Given that this has been the case for more than 10 years, it’s safe to assume that it’s not an accidental omission but a deliberate design choice. For information about the Wi-Fi APIs that are available on iOS, see TN3111 iOS Wi-Fi API overview. Network performance Most folks who ask about this are trying to use the signal strength to estimate network performance. This is a technique that I specifically recommend against. That’s because it produces both false positives and false negatives: The network signal might be weak and yet your app has excellent connectivity. For example, an iOS device on stage at WWDC might have terrible WWAN and Wi-Fi signal but that doesn’t matter because it’s connected to the Ethernet. The network signal might be strong and yet your app has very poor connectivity. For example, if you’re on a train, Wi-Fi signal might be strong in each carriage but the overall connection to the Internet is poor because it’s provided by a single over-stretched WWAN. The only good way to determine whether connectivity is good is to run a network request and see how it performs. If you’re issuing a lot of requests, use the performance of those requests to build a running estimate of how well the network is doing. Indeed, Apple practices what we preach here: This is exactly how HTTP Live Streaming works. Remember that network performance can change from moment to moment. The user’s train might enter or leave a tunnel, the user might step into a lift, and so on. If you build code to estimate the network performance, make sure it reacts to such changes. Keeping all of the above in mind, iOS 26 beta has two new APIs related to this issue: Network framework now offers a linkQuality property. See this post for my take on how to use this effectively. The WirelessInsights framework can notify you of anticipated WWAN condition changes. But what about this code I found on the ’net? Over the years various folks have used various unsupported techniques to get around this limitation. If you find code on the ’net that, say, uses KVC to read undocumented properties, or grovels through system logs, or walks the view hierarchy of the status bar, don’t use it. Such techniques are unsupported and, assuming they haven’t broken yet, are likely to break in the future. But what about Hotspot Helper? Hotspot Helper does have an API to read Wi-Fi signal strength, namely, the signalStrength property. However, this is not a general-purpose API. Like the rest of Hotspot Helper, this is tied to the specific use case for which it was designed. This value only updates in real time for networks that your hotspot helper is managing, as indicated by the isChosenHelper property. But what about MetricKit? MetricKit is so cool. Amongst other things, it supports the MXCellularConditionMetric payload, which holds a summary of the cellular conditions while your app was running. However, this is not a real-time signal strength value. But what if I’m working for a carrier? This post is about APIs in the iOS SDK. If you’re working for a carrier, discuss your requirements with your carrier’s contact at Apple. Revision History 2025-07-02 Updated to cover new features in the iOS 16 beta. Made other minor editorial changes. 2022-12-01 First posted.

I can build the SimpleFirewall application (https://developer.apple.com/documentation/networkextension/filtering_network_traffic ) using xcode: After I run the application, seems can't block any traffic. I find there is some logs from network extension process: networkd_settings_read_from_file Sandbox is preventing this process from reading networkd settings file at "/Library/Preferences/com.apple.networkd.plist", please add an exception. Any step I am missing ?

I found a problem where a process tries to connect to System Extension and connection is invalidated. XPC listener has to be disposed and initialized again. This happens when System Extension executes tasks in following order: NSXPCListener initialized NSXPCListener.resume() NSProvider.startSystemExtensionMode() Result: Connection is invalidated and not only that the client has to retry connection, nut also System Extension must reinitialize listener (execute step 1 and 2). However if I call NSProvider.startSystemExtensionMode() NSXPCListener initialized NSXPCListener.resume() It works as expected and even if the connection is invalidated/interrupted, client process can always reconnect and no other action is necessary in System Extension (no need to reinitialize XPC listener), In Apple docs about NSProvider.startSystemExtensionMode() it says that this method starts handling request, but in another online article written by Scott Knight I found that startSystemExtensionMode() also starts listener server. Is that right? PLease could you add this info into the docs if it is so? https://knight.sc/reverse%20engineering/2019/08/24/system-extension-internals.html I would like to use following logic: Call NSProvider.startSystemExtensionMode() only under certain circumstances - I have received some configuration that I need to process and do some setup. If I don't receive it, there is no reason to call startSystemExtensionMode() yet, I don't need to handle handleNewFlow() yet. Connect XPC client to System Extension under certain conditions. Ideally communicate with client even though System Extension is not handling network requests yet, that is without receiving handleNewFlow(). Basically I consider XPC and System Extension handling network requests as separate things. Is that correct, are they separate and independent? Does XPC communication really depend on calling startSystemExtensionMode()? Another potential issue: Is it possible that XPC listener fails to validate connection when client tries to connect before System Extension manages to complete init and park the main thread in CFRunLoop? Note: These querstions arose mostly from handling upgrades of System Extension (extension is already running, network filter is created and is connected and new version of the app upgrades System Exension). Thanks.

Hi All, I am facing with ****** issue, searched through many similar topics, but did not find solution, hope someone can help me! Common information: iOS VPN application min. deployment iOS 15.0 Xcode 14.2 Testing on iPhone with iOS 16.0.2 / 15.5 Problem description Application is builded, installed on iPhone and launched from XCode. After a new VPN configuration is added by application using NETunnelProviderManager. No errors are occurred during all this steps. However I can not enable VPN and in VPN settings I observe "Update required" message: "Application must be updated by the developer before VPN can be connected"

Hello, Our users are seeing random crashes in our packet filter system extension on macOS. Any help pointing me in the right direction to either avoid the issue or fix it would be greatly appreciated. Attached is the crash log. Thank you. packetfilter.crash Crashed Thread: 2 Dispatch queue: com.apple.network.connections Exception Type: EXC_BAD_ACCESS (SIGBUS) Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000112918700 Exception Note: EXC_CORPSE_NOTIFY Termination Signal: Bus error: 10 Termination Reason: Namespace SIGNAL, Code 0xa Terminating Process: exc handler [40687] ... Thread 2 Crashed:: Dispatch queue: com.apple.network.connections 0 libsystem_kernel.dylib 0x00007fff2089b46e os_channel_get_next_slot + 230 1 com.apple.NetworkExtension 0x00007fff2e2e2643 __40-[NEFilterPacketInterpose createChannel]_block_invoke + 560 2 libdispatch.dylib 0x00007fff20718806 _dispatch_client_callout + 8 3 libdispatch.dylib 0x00007fff2071b1b0 _dispatch_continuation_pop + 423 4 libdispatch.dylib 0x00007fff2072b564 _dispatch_source_invoke + 2061 5 libdispatch.dylib 0x00007fff20720318 _dispatch_workloop_invoke + 1784 6 libdispatch.dylib 0x00007fff20728c0d _dispatch_workloop_worker_thread + 811 7 libsystem_pthread.dylib 0x00007fff208bf45d _pthread_wqthread + 314 8 libsystem_pthread.dylib 0x00007fff208be42f start_wqthread + 15

Hi, I saw that almost each OS version, on ios and macos, handles differently changing includeAllNetworks while the tunnel is running. On some the entire OS reports no-net, while others, specially latest versions, handle this fine. Can includeAllNetworks be changed while the tunnel is running, or the tunnel must be stopped and restarted with the new value? e.g. the tunnel is started with it set to false, but later is changed to true into VPN profile. And on the same note, regarding setTunnelNetworkSettings, can this be called multiple times while the tunnel is running? For example if the VPN server IP changes. Because what I've saw each call to setTunnelNetworkSettings after VPN connected results in at least DNS leaks, because the routing table is recreated. Let me know if it is easier to track to create separate questions. Thanks

Hello everyone, I'm encountering an issue while trying to publish an app on TestFlight. The app in question is Home Assistant, which I've compiled from the source. I am able to compile and install the app on my device without any problems. My company's developer account is properly configured, and I have set Xcode to automatically manage the provisioning profile. The archive is also created successfully, but when I attempt to upload it to Apple Store Connect for testing via TestFlight, I receive the following error: ERROR: [ContentDelivery.Uploader] Asset validation failed (90525) Missing Entitlement. The bundle 'Home Assistant.app/PlugIns/HomeAssistant-Extensions-PushProvider.appex' is missing entitlement 'com.apple.developer.networking.networkextension'. (ID: ceac6dcc-9c76-412e-8ea7-f2d2845f8013) I've made several attempts to resolve this issue to no avail. For instance, if I add the missing capability manually, then I am informed that the provisioning profile is incorrect. However, checking the network extension settings on my company's dev account, I see nothing related to push notifications, which are located elsewhere. Thus, I am stuck in a loop where either the provisioning file is correct but the entitlement is missing, or if the entitlement is present, then the provisioning profile is deemed incorrect. URL:https://contentdelivery.itunes.apple.com status code: 409 (conflict) httpBody: { "errors" : [ { "id" : "ceac6dcc-9c76-412e-8ea7-f2d2845f8013", "status" : "409", "code" : "STATE_ERROR.VALIDATION_ERROR.90525", "title" : "Asset validation failed", "detail" : "Missing Entitlement. The bundle 'Home Assistant.app/PlugIns/HomeAssistant-Extensions-PushProvider.appex' is missing entitlement 'com.apple.developer.networking.networkextension'." }, { "id" : "9ff2143b-3c00-4912-b59f-8342fa6fe5c0", "status" : "409", "code" : "STATE_ERROR.VALIDATION_ERROR.90525", "title" : "Asset validation failed", "detail" : "Missing Entitlement. The bundle 'Home Assistant.app' is missing entitlement 'com.apple.developer.networking.networkextension'." } ] } ======================================= 2024-01-10 23:19:35.506 ERROR: [ContentDelivery.Uploader] Asset validation failed (90525) Missing Entitlement. The bundle 'Home Assistant.app/PlugIns/HomeAssistant-Extensions-PushProvider.appex' is missing entitlement 'com.apple.developer.networking.networkextension'. (ID: ceac6dcc-9c76-412e-8ea7-f2d2845f8013) 2024-01-10 23:19:35.506 DEBUG: [ContentDelivery.Uploader] Error Domain=ContentDelivery Code=90525 "Asset validation failed" UserInfo={NSLocalizedFailureReason=Missing Entitlement. The bundle 'Home Assistant.app/PlugIns/HomeAssistant-Extensions-PushProvider.appex' is missing entitlement 'com.apple.developer.networking.networkextension'. (ID: ceac6dcc-9c76-412e-8ea7-f2d2845f8013), NSUnderlyingError=0x6000022b6430 {Error Domain=IrisAPI Code=-19241 "Asset validation failed" UserInfo={status=409, detail=Missing Entitlement. The bundle 'Home Assistant.app/PlugIns/HomeAssistant-Extensions-PushProvider.appex' is missing entitlement 'com.apple.developer.networking.networkextension'., id=ceac6dcc-9c76-412e-8ea7-f2d2845f8013, code=STATE_ERROR.VALIDATION_ERROR.90525, title=Asset validation failed, NSLocalizedFailureReason=Missing Entitlement. The bundle 'Home Assistant.app/PlugIns/HomeAssistant-Extensions-PushProvider.appex' is missing entitlement 'com.apple.developer.networking.networkextension'., NSLocalizedDescription=Asset validation failed}}, iris-code=STATE_ERROR.VALIDATION_ERROR.90525, NSLocalizedDescription=Asset validation failed} 2024-01-10 23:19:35.507 ERROR: [ContentDelivery.Uploader] Asset validation failed (90525) Missing Entitlement. The bundle 'Home Assistant.app' is missing entitlement 'com.apple.developer.networking.networkextension'. (ID: 9ff2143b-3c00-4912-b59f-8342fa6fe5c0) 2024-01-10 23:19:35.507 DEBUG: [ContentDelivery.Uploader] Error Domain=ContentDelivery Code=90525 "Asset validation failed" UserInfo={NSLocalizedFailureReason=Missing Entitlement. The bundle 'Home Assistant.app' is missing entitlement 'com.apple.developer.networking.networkextension'. (ID: 9ff2143b-3c00-4912-b59f-8342fa6fe5c0), NSUnderlyingError=0x6000022b6640 {Error Domain=IrisAPI Code=-19241 "Asset validation failed" UserInfo={status=409, detail=Missing Entitlement. The bundle 'Home Assistant.app' is missing entitlement 'com.apple.developer.networking.networkextension'., id=9ff2143b-3c00-4912-b59f-8342fa6fe5c0, code=STATE_ERROR.VALIDATION_ERROR.90525, title=Asset validation failed, NSLocalizedFailureReason=Missing Entitlement. The bundle 'Home Assistant.app' is missing entitlement 'com.apple.developer.networking.networkextension'., NSLocalizedDescription=Asset validation failed}}, iris-code=STATE_ERROR.VALIDATION_ERROR.90525, NSLocalizedDescription=Asset validation failed} 2024-01-10 23:19:35.507 DEBUG: [ContentDelivery.Uploader] swinfo errors: ( "Error Domain=ContentDelivery Code=90525 \"Asset validation failed\" UserInfo={NSLocalizedFailureReason=Missing Entitlement. The bundle 'Home Assistant.app/PlugIns/HomeAssistant-Extensions-PushProvider.appex' is missing entitlement 'com.apple.developer.networking.networkextension'. (ID: ceac6dcc-9c76-412e-8ea7-f2d2845f8013), NSUnderlyingError=0x6000022b6430 {Error Domain=IrisAPI Code=-19241 \"Asset validation failed\" UserInfo={status=409, detail=Missing Entitlement. The bundle 'Home Assistant.app/PlugIns/HomeAssistant-Extensions-PushProvider.appex' is missing entitlement 'com.apple.developer.networking.networkextension'., id=ceac6dcc-9c76-412e-8ea7-f2d2845f8013, code=STATE_ERROR.VALIDATION_ERROR.90525, title=Asset validation failed, NSLocalizedFailureReason=Missing Entitlement. The bundle 'Home Assistant.app/PlugIns/HomeAssistant-Extensions-PushProvider.appex' is missing entitlement 'com.apple.developer.networking.networkextension'., NSLocalizedDescription=Asset validation failed}}, iris-code=STATE_ERROR.VALIDATION_ERROR.90525, NSLocalizedDescription=Asset validation failed}", "Error Domain=ContentDelivery Code=90525 \"Asset validation failed\" UserInfo={NSLocalizedFailureReason=Missing Entitlement. The bundle 'Home Assistant.app' is missing entitlement 'com.apple.developer.networking.networkextension'. (ID: 9ff2143b-3c00-4912-b59f-8342fa6fe5c0), NSUnderlyingError=0x6000022b6640 {Error Domain=IrisAPI Code=-19241 \"Asset validation failed\" UserInfo={status=409, detail=Missing Entitlement. The bundle 'Home Assistant.app' is missing entitlement 'com.apple.developer.networking.networkextension'., id=9ff2143b-3c00-4912-b59f-8342fa6fe5c0, code=STATE_ERROR.VALIDATION_ERROR.90525, title=Asset validation failed, NSLocalizedFailureReason=Missing Entitlement. The bundle 'Home Assistant.app' is missing entitlement 'com.apple.developer.networking.networkextension'., NSLocalizedDescription=Asset validation failed}}, iris-code=STATE_ERROR.VALIDATION_ERROR.90525, NSLocalizedDescription=Asset validation failed}" )

I am integrating per-app VPN functionality into an iOS app using Wireguard. Chrome is designated as a per-app application for this purpose. However, upon opening Chrome, the VPN icon appears in the notification bar, but there is no internet connection within the Chrome browser. I have verified this behavior with OpenVPN, and it works correctly. While I am familiar with the MDM payload and how to implement per-app VPN, my primary concern is understanding why per-app VPN functionality is not functioning as expected with WireGuard. An observation we made in the server-side logs is the message: "wireguard: wg0: Packet has incorrect size from peer 1"

Feedback Ticket: FB13812251 Problem Statement: We are currently facing internet connectivity issue with our VPN application where we try to disconnect the VPN from the Packet Tunnel Network Extension using - (void)cancelTunnelWithError:(nullable NSError *)error. Which API to use to disconnect the VPN from Packet Tunnel as VPN app is not running such that device retains its internet connectivity as soon as VPN disconnects. Configuration: We have configured PacketTunnelProvider with the following settings: (NETunnelProviderManager *)tunnelProvider.protocolConfiguration.includeAllNetworks = YES; (NETunnelProviderManager *)tunnelProvider.protocolConfiguration.excludeLocalNetworks = NO; (NETunnelProviderManager *)tunnelProvider.protocolConfiguration.enforceRoutes = NO; These settings are applied from the VPN app and allow us to successfully establish a VPN connection, with all traffic being routed through the tunnel as expected.We are setting above properties to address local net attack. Issue we are facing: However, we encounter a problem when we attempt to disconnect the VPN from. When we call the following method from PacketTunnel network extension: (void)cancelTunnelWithError:(nullable NSError *)error Upon calling this method, the VPN disconnects as expected, but the device loses all internet connectivity and is unable to access any resources. This is not the desired behavior. Observation : Interestingly, when we call the following method from the app side. The VPN disconnects and the device retains its internet connectivity. [enabledConfig.connection stopVPNTunnel]; We would like to achieve the same behavior when disconnecting the VPN from the Network Extension. So we are looking for an API that could be called from NE without causing any internet connectivity issue. Any guidance on how to resolve this issue would be greatly appreciated.

We're encountering an issue with our Network Extension (utilizing NEPacketTunnelProvider and NETransparentProxy) on macOS 14.5 (23F79). On some systems, the VPN fails to automatically start after a reboot despite calling startVPNTunnel(). There are no error messages. Our code attempts to start the tunnel: ....... do { try manager.connection.startVPNTunnel() Logger.default("Started tunnel successfully") } catch { Logger.error("Failed to launch tunnel") } ...... System log analysis reveals the tunnel stopping due to userLogout (NEProviderStopReason(rawValue: 12)) during reboot. However, the Transparent Proxy stops due to userInitiated (NEProviderStopReason(rawValue: 1)) for the same reboot. We need to understand: Why the VPNTunnel isn't starting automatically. Why the userLogout reason is triggered during reboot. Additional Context: We have manually started the VPN from System Settings before reboot.

Title: Loss of Internet Connectivity on iOS Device When Packet Tunnel Crashes Feedback ticket: https://feedbackassistant.apple.com/feedback/14162605 Product: iPhone 12 Version: iOS - 17.5.1 Configuration: NETunnelProviderManager Configuration Description: We are developing an iOS VPN client and have configured our packet tunnel provider according to Apple's guidelines. The configuration is as follows: includeAllNetworks = YES excludeLocalNetworks = NO enforceRoutes = NO This setup works as expected when the VPN successfully connects. However, we encounter a blocker issue where the device loses internet connectivity if the packet tunnel crashes. Steps to Reproduce: Configure the NETunnelProviderManager with the above settings. Connect the VPN, which successfully establishes a connection. Verify that resources are accessible and internet connectivity is functional. Packet tunnel to crash unexpectedly.Observe that the NE process (Packet Tunnel) restarts automatically, as expected and attempts to reconnect the VPN; however, the device now lacks internet connectivity, preventing VPN reconnection. Try accessing resources using Safari or any other internet-dependent app, resulting in an error indicating the device is not connected to the internet. Actual Results: The device loses internet connectivity after the packet tunnel crashes and fails to regain it automatically, preventing the VPN from reconnecting. Expected Results: The device should maintain internet connectivity or recover connectivity to allow the VPN to reconnect successfully after the packet tunnel process restarts. Workaround - iPhone device needs a restart to regain internet connectivity .