HTTP status code: 401. Invalid credentials. Username or password is incorrect. Use the app-specific password generated at appleid.apple.com. Ensure that all authentication arguments are correct. I double checked every thing but still getting same error

I've been stuck on Guideline 2.3 for two weeks now and I'm running out of ideas. My app is iPhone-only (UIDeviceFamily = [1]) and has been on the App Store since January. Version 2.1.9 passed review fine. The only change in 2.1.10 is adding two DeviceActivity extensions — a DeviceActivityMonitor and a DeviceActivityReport — for screen time-based stress detection. Every build since then gets rejected with the same message: "The UIRequiredDeviceCapabilities key in the Info.plist is set up in such a way that the app will not install on the device used in review." Review devices: iPhone 14 Pro, iPhone 17 Pro Max, iPad Air M3. Here's what I've tried across 13+ submissions: UIRequiredDeviceCapabilities as ["arm64"] (array) — rejected Empty array [] — rejected Removed the key entirely — upload validation fails, Xcode re-injects arm64 anyway Post-build script to force ["arm64"] — rejected Dictionary format {"arm64": true} — rejected Added com.apple.developer.family-controls to extension entitlements — rejected Enabled Family Controls (Distribution) on extension bundle IDs — rejected Fixed CFBundleVersion mismatch between host app and extensions — rejected Set TARGETED_DEVICE_FAMILY=1 on all targets including extensions — rejected Tried GENERATE_INFOPLIST_FILE=YES with minimal plists — rejected Tried ExtensionKit type for the report extension — rejected In the exported IPA, every target has UIRequiredDeviceCapabilities = ["arm64"] and UIDeviceFamily = [1]. The entitlements, provisioning profiles, and code signing all look correct. arm64 is supported on every review device they listed. The previous version (2.1.9) without DeviceActivity extensions passes review with the exact same UIRequiredDeviceCapabilities and signing configuration. Has anyone shipped an app with DeviceActivityMonitor + DeviceActivityReport extensions successfully? Is there something specific about these extension types that affects device capability validation? Or is there a known issue with the review system and FamilyControls extensions? I've replied to the review team multiple times asking which specific capability is causing the failure, but the response is always the same generic template. Any guidance would be really appreciated — I'm completely blocked on shipping this update.

Hi everyone, I'm integrating Apple's DeviceCheck API into my app and have run into a strange issue that I can't find documented anywhere. The Problem When I call Apple's DeviceCheck query endpoint (POST https://api.devicecheck.apple.com/v1/query_two_bits), the response occasionally returns a last_update_time value that is in the future — ahead of the current server time. Example response: { "bit0": true, "bit1": false, "last_update_time": "2026-05" // future month, not yet reached } What I've Checked My server's system clock is correctly synced via NTP The JWT token I generate uses the current timestamp for the iat field This doesn't happen on every device — only on some specific devices The issue is reproducible on the same device across multiple calls Questions Is last_update_time sourced from the device's local clock at the time update_two_bits was called? Or is it stamped server-side by Apple? Could a device with an incorrectly set system clock (set to the future) cause Apple's servers to record a future last_update_time? Is there a recommended way to validate or sanitize last_update_time on the server side to handle this edge case? Has anyone else encountered this behavior? Any known workarounds? Any insight would be greatly appreciated. Thanks!

Hello, I released a new build for my app but it fails to run on iOS 12.5.8 (tested on iPad Air, iPhone 6, iPhone 5s). The launch storybard is shown, then the app stops abruptly. There is no crash log. It runs fine on iOS 13 or higher. Xcode 26.3 was showing a call stack (something with UIView) that did not include any app code. Now with Xcode 26.4 (and its new command line tools) there is an info popup with a debug metadata dump. However, I don’t intend to focus on Xcode here because it officially does not support iOS 12. It’s ok if I cannot debug, I just want the app to run on the device like the previous build did. Since there is no crash log, and the console is showing a bootstrap error, I believe my app code has not been executed and is therefore not at fault. Build 674 released on 23-Mar-2026: worked fine on iOS 12, built with Xcode 26.3 Build 675 released on 29-Mar-2026: Bootstrap error as described, with both Xcode 26.3 and 26.4 Deployment target = 12.4 Tried Instruments but it fails as soon as I hit record. In the console I found BKSProcessErrorDomain code 1. Here on the forum I found a post where the cause was no internet access but my device does have internet access. I made only very little code changes to my app between 674 and 675, no storyboard updates. I get the impression the loader does not even begin to execute my code. At this point I wonder if: some certificate has expired (see release dates above), or if something is incompatible in my main storyboard (though I did not change anything there), or the device ran out of memory (1 GB) Note: The app has 4 targets: main app target framework AU app extension intents app extension Thanks, Sven PS: Misclicked subtopic which should have been General (sorry). Here’s the redacted console excerpt: standard 22:21:13.187990+0200 SpringBoard Evaluate: making new window key: <SBMainSwitcherWindow: 0x159e5f640>, for reason: push standard 22:21:13.188303+0200 SpringBoard Removed: <FBUIApplicationSceneDeactivationAssertion: 0x283c9dfe0; reason: systemAnimation; all scene levels; hasPredicate: NO> standard 22:21:13.198299+0200 assertiond Submitting new job for "com.example.app" on behalf of <BKProcess: 0x141d15d50; SpringBoard; com.apple.springboard; pid: 48; agency: SystemShell; visibility: foreground; task: running> standard 22:21:13.198867+0200 SpringBoard Bootstrapping com.example.app with intent foreground-interactive standard 22:21:13.201136+0200 assertiond Submitted job with label: UIKitApplication:com.example.app[0x1d9f][58] standard 22:21:13.201244+0200 SpringBoard Icon touch canceled (tap gesture may still succeed): <private> fehler 22:21:13.201329+0200 SpringBoard [com.example.app] Bootstrap failed with error: <NSError: 0x283e4cd80; domain: BKSProcessErrorDomain; code: 1 (bootstrap-failed); reason: "Failed to start job"> fehler 22:21:13.201421+0200 SpringBoard Bootstrapping failed for <FBApplicationProcess: 0x15d13b3e0; com.example.app; pid: -1> with error: Error Domain=BKSProcessErrorDomain Code=1 "Unable to bootstrap process with bundleID com.example.app" UserInfo={NSLocalizedDescription=Unable to bootstrap process with bundleID com.example.app, BKSProcessExitReason=0, NSLocalizedFailureReason=Failed to start job, NSUnderlyingError=0x283e4c5d0 {Error Domain=NSPOSIXErrorDomain Code=3 "No such process" UserInfo={BKLaunchdOperation=launch_get_running_pid_4SB, NSLocalizedDescription=Unable to get pid for label UIKitApplication:com.example.app[0x1d9f][58], BKLaunchdJobLabel=UIKitApplication:com.example.app[0x1d9f][58], NSLocalizedFailureReason=No such process}}, BKSProcessJobLabel=UIKitApplication:com.example.app[0x1d9f][58], BSErrorCodeDescription=bootstrap-failed} standard 22:21:13.201507+0200 SpringBoard Adding: <FBApplicationProcess: 0x15d13b3e0; com.example.app; pid: -1> standard 22:21:13.201606+0200 SpringBoard <FBApplicationProcess: 0x15d13b3e0; com.example.app; pid: -1> exited. standard 22:21:13.202002+0200 assertiond Unable to get pid for 'UIKitApplication:com.example.app[0x1d9f][58]': No such process (3) fehler 22:21:13.202145+0200 assertiond Failed to start job with error <NSError: 0x141e1aba0; domain: NSPOSIXErrorDomain; code: 3; reason: "No such process"> { description = "Unable to get pid for label UIKitApplication:com.example.app[0x1d9f][58]"; failureReason = "No such process"; userInfo = { BKLaunchdJobLabel = UIKitApplication:com.example.app[0x1d9f][58]; BKLaunchdOperation = launch_get_running_pid_4SB; } } standard 22:21:13.202238+0200 assertiond Deleted job with label: UIKitApplication:com.example.app[0x1d9f][58] standard 22:21:13.202804+0200 SpringBoard Removing: <FBApplicationProcess: 0x15d13b3e0; com.example.app; pid: -1> standard 22:21:13.221231+0200 SpringBoard Application process state changed for com.example.app: <SBApplicationProcessState: 0x28336f0a0; pid: -1; taskState: Not Running; visibility: Unknown> standard 22:21:13.221566+0200 SpringBoard Process exited: <FBApplicationProcess: 0x15d13b3e0; com.example.app; pid: -1> -> <FBApplicationProcessExitContext: 0x283e37b10; exitReason: (none); terminationReason: (none)> { stateAtExit = <FBProcessState: 0x28337c760; pid: -1; taskState: Unknown; visibility: Unknown>; }

Hello, Because our app package size is relatively large, part of our resources needs to be delivered through Apple-hosted asset packs. If we use the Background Assets framework to download these Apple-hosted packs, our app would only be able to support devices running iOS 26 or later. To maintain compatibility with a broader range of iOS versions, we chose to use iOS On-Demand Resources instead. However, during actual use, we found that even when these packs are marked with the initial install tag, there is still a fairly high probability (around 40%) that they are not available on the first screen after the app is launched for the first time. When we try to access them through conditionallyBeginAccessingResourcesWithCompletionHandler, the resources are unavailable, which forces us to download them again. During testing, we added event tracking and found that out of 22 users who downloaded the app, 9 had to re-download these resource packs on first launch. Each of these packs marked with the initial install tag is about 300 MB in size. We have also made sure to follow the NSBundleResourceRequest limitation that no more than 2000 × 1000 × 1000 bytes of resources should be accessed at the same time. We would like to understand why these packs, even though they are marked as initial install, still have such a high probability (around 40%) of being unavailable on the first screen at first launch.

Hi team: I recently update to Xcode 26.4, and I encountered crash when running to < iOS 26.4 both for physical device and Simulator with this log: dyld[1257]: Symbol not found: _$s9MetricKit10mxSignpost_3dso3log4name10signpostID__ySo03os_H7_type_ta_SVSo03OS_j1_F0Cs12StaticStringV0J0010OSSignpostI0VALSays7CVarArg_pGtF Referenced from: <164CCEB0-E1F8-3CE2-A934-2096C19C0A9A> /private/var/containers/Bundle/Application/EA709A68-F76F-4D97-85C6-B71D61D68389/xxx.app/xxx.debug.dylib Expected in: <9E5EC9BB-5828-329C-A2BC-038B67060298> /System/Library/Frameworks/MetricKit.framework/MetricKit Symbol not found: _$s9MetricKit10mxSignpost_3dso3log4name10signpostID__ySo03os_H7_type_ta_SVSo03OS_j1_F0Cs12StaticStringV0J0010OSSignpostI0VALSays7CVarArg_pGtF Referenced from: <164CCEB0-E1F8-3CE2-A934-2096C19C0A9A>x /private/var/containers/Bundle/Application/EA709A68-F76F-4D97-85C6-B71D61D68389/xxx.app/xxx.debug.dylib Expected in: <9E5EC9BB-5828-329C-A2BC-038B67060298> /System/Library/Frameworks/MetricKit.framework/MetricKit dyld config: DYLD_LIBRARY_PATH=/usr/lib/system/introspection DYLD_INSERT_LIBRARIES=/usr/lib/libLogRedirect.dylib:/usr/lib/libBacktraceRecording.dylib:/usr/lib/libMainThreadChecker.dylib:/usr/lib/libRPAC.dylib:/usr/lib/libViewDebuggerSupport.dylib but iOS 26.4 works well. Env: Xcode: 26.4 Simulator/Physical Device: < 26.4 macOS: 26.3 Thanks for giving any help.

When using DateFormatter with the Atlantic/Azores timezone, calling date(from: formattedString) for the date 2026-03-29 returns nil unexpectedly. codes： let dateFormatter = DateFormatter() dateFormatter.dateFormat = "yyyyMMdd" // 年月日格式 dateFormatter.timeZone = TimeZone(identifier: "Atlantic/Azores") dateFormatter.locale = Locale(identifier: "en_US_POSIX") var now = Date() now -= 60 * 60 * 13 let formattedString = dateFormatter.string(from: now) let dateWithTimeZone = dateFormatter.date(from: formattedString) print(formattedString) //20260329 print(dateWithTimeZone) // nil

Hello, I am starting work on adding AlarmKit to an existing project. During testing, I ran into an issue that if I hit Deny during the authorization request, I can't find any way to turn the alarm back on in settings. The only way I can get an authorization request again is by uninstalling the app and installing it again. I would like to be able to prompt my users where they can turn the Alarm back on if they accidentally hit Deny. Am I just not seeing the settings to change this somewhere?

I’m building an iOS app that uses FamilyControls + ManagedSettings + DeviceActivity. Goal: temporarily “unlock” a shielded app for N minutes, then automatically re-apply the shield when the timer expires. What I do: In the main app, when user picks an expiry (e.g. 15 min, 30 min). I start a non-repeating DeviceActivity schedule and remove the app’s ApplicationToken from ManagedSettingsStore().shield.applications. I also store activeUnlockBundleID etc. in an App Group so the DeviceActivityMonitor extension can re-lock at the end. Expected: DeviceActivityMonitor.intervalDidEnd(for:) is invoked when the non-repeating interval ends, and I re-add the token to the shield set. Actual: The app does not re-lock when the interval expires. I added OS logs as well as “debug local notifications” from the DeviceActivityMonitor extension in: init() intervalDidStart intervalDidEnd eventDidReachThreshold None of these logs or notifications ever appear, which suggests the extension is never invoked (or cannot schedule local notifications or OS logs). Environment: Device: iPhone 17 Pro iOS 26.3.1 Xcode 26.4 Running on a physical device Notification permissions for the app: granted App + extensions are in the same App Group entitlement. Extension Info.plist has: NSExtensionPointIdentifier = com.apple.deviceactivity.monitor NSExtensionPrincipalClass = $(PRODUCT_MODULE_NAME).DeviceActivityMonitorExtension Questions: Are there known limitations/requirements for DeviceActivityMonitor callbacks where intervalDidEnd doesn't to fire? Is posting local notifications / OS Logs from a DeviceActivityMonitor extension supported/reliable? If not, what’s the recommended way to verify the extension is invoked? If this looks like a platform bug, should I file Feedback Assistant? If so, what logs/artifacts are most useful?

I’m running into a hardware reality. MEMS sensor thermal drift. If a user zeroes out the tilt indoors at 20°C and then takes the phone outside in the cold, the accelerometer baseline shifts just enough as the device cools to throw off the readings. I want to apply a simple thermal compensation curve to the CoreMotion data to keep the "zero" perfectly level regardless of the weather. However, ProcessInfo.thermalState only gives broad buckets (nominal, fair, etc.) which doesn't help me calculate a continuous offset for a phone cooling down degree by degree. Is there any public API, or even a proxy metric, that can give me a rough battery or internal temperature integer? I don’t need high resolution decimals. Just a general device temp to offset the hardware drift. Any undocumented tricks or proxy metrics anyone has used to handle this?

I'm building an app that integrates with Reminders using EventKit, but I can't find a way to access two important structures from EventKit: The groups that contain reminder lists The sections inside each reminder list (available since iOS 17) Any help or guidance would be appreciated.

The documentation for NSURL -URLByAppendingPathComponent: states: "Returns a new URL by appending a path component to the original URL." Path component is singular. But this "works" : NSURL *testURL = [applicationsDirectory URLByAppendingPathComponent:@"Evil/../../" isDirectory:YES]; So my questions are: One) Was it always this way? I can't recall if it was like this before the Foundation rewrite and I just never stumbled across? and Two) Is it intended behavior? The API seems to suggest that you append one path component on the url with this method. But I guess you can append as many as you want?

Hello, I submitted a request for the Family Controls (Distribution) entitlement, but haven't received status update regarding approval/rejection etc. I submitted a previous contact support ticket as well. I'm wondering the timeline and also if my request went through - currently it says 'submitted' but it's remained this way for a while... I've had other developers in communities saying they were approved earlier, so curious if it's an app issue. Thank you

Hello, I am the developer of an app called one sec which helps users to spend less time on social media: https://one-sec.app Therefore, we make heavy use of the Screen Time API, and thus ManagedSettings and ShieldActionDelegate. One feature of one sec is the so-called “Doom Scroll Emergency Brake”. This blocks a target app after a certain usage threshold (e.g. 5 minutes) and requires going through an intervention (e.g. breathing exercise) to unlock more time. That added friction makes it very effective in reducing time spent on apps. One thing that is confusing for our users is the way they are prompted to unlock more time, if they want to. They have to: Have Push Notifications enabled for one sec Exempt one sec’s notifications from being delayed by AI prioritization (otherwise they are delayed by ca. 10s) Ensure that push notifications can be delivered during foci. Understand that they have to tap on the notification, which is not very straight-forward because it does not make sense from the user’s UX perspective. This is an artificial limitation of Apple’s screen time framework which has no reason (no security / privacy implications here…). Screenshots of the current flow attached. If would be much more reasonable if there was a new ShieldActionResponse.openParentApp value that can be returned from the completion handler of the ShieldActionDelegate.handle(…) callback. We have seen different apps use private API to achieve this, but we are afraid to do the same to avoid getting banned from the App Store. It would be fair if Apple would level the playground for all apps and offer such an API officially. – Frederik PS: Tracked under FB22347946, FB18846650, FB15500681, FB15079668, FB10393561 (all without responses so far…)

We are developing an MDM agent app that uses FamilyControls with .individual authorization to enforce Screen Time restrictions (app blocking, domain blocking via ManagedSettingsStore and DeviceActivityCenter). The Problem We are actively subscribing to AuthorizationCenter.shared.$authorizationStatus to detect authorization changes. However, when the user revokes the app's FamilyControls authorization through Settings (either via Settings > Screen Time > Apps With Screen Time Access, or Settings > Apps > [Our App]), the publisher does not emit any value. All ManagedSettingsStore restrictions are lifted immediately by the system, but our app receives no notification of this change. The only scenario where the publisher reliably emits is when a debugger is attached (i.e., running directly from Xcode). Without the debugger, the publisher is completely silent — even when the app returns to foreground. Code Example We tried subscribing directly to AuthorizationCenter.shared.$authorizationStatus with no intermediary, exactly as shown in the documentation: AuthorizationCenter.shared.$authorizationStatus .sink { status in print("[DIRECT] authorizationStatus emitted: \(status)") } .store(in: &cancellables) This subscription is set up at app launch and stored in cancellables. The result is the same — the publisher does not emit when the user revokes authorization in Settings without a debugger attached. Documentation Reference The documentation for authorizationStatus states: "The status may change due to external events, such as a child graduating to an adult account, or a parent or guardian changing the status in Settings." And: "The system sets this property only after a call to requestAuthorization(for:) succeeds. It then updates the property until a call to revokeAuthorization(completionHandler:) succeeds or your app exits." This suggests the publisher should emit when the status is changed via Settings, but in our testing it does not — unless a debugger is attached. What We Verified We tested with a development-signed build (which includes the com.apple.developer.family-controls entitlement), launched from Xcode, then disconnected the debugger, killed the app, and relaunched from the home screen. Scenario Publisher emits on revocation? Running from Xcode (debugger attached) Yes, immediately Development-signed build (no debugger) No — silent even on foreground return We also confirmed: MDM configuration profiles can disable Screen Time entirely, but cannot restrict the per-app authorization toggle — the user can always freely revoke the app's Screen Time access The Security Gap This creates a significant gap for parental controls use cases: User leaves the app (app goes to background) User goes to Settings and disables Screen Time access for the app All restrictions are immediately lifted User uses the device freely User re-enables Screen Time access and opens the app Everything syncs back to normal — administrator never knows Questions Is there any supported mechanism to receive a notification (background or foreground) when FamilyControls individual authorization is revoked? We are subscribing to AuthorizationCenter.shared.$authorizationStatus but it does not emit. Is the $authorizationStatus publisher expected to work only when a debugger is attached? Is this a known limitation or a bug? Can DeviceActivityMonitor extension detect authorization revocation? Based on documentation it appears limited to schedule/threshold events, but we haven't confirmed this. Is there a planned API improvement to address this gap? Environment iOS 26.2 Xcode 26.3 Swift 6.2.4 FamilyControls .individual authorization Related Threads Screen time API can be disabled easily Changing Screen Time Passcode does not protect apps

Hi, Regarding the Brazil Digital ECA (DECA) requirements, which became effective on March 17, 2026. Following the guidance for regulated regions, we have been testing the eligibility check with the iOS 26.4 release. We previously confirmed that isEligibleForAgeFeatures was returning true for users in the Brazil region, which allowed us to verify our age-gating implementation. A few questions follow on this eligibility check: We have observed in manual testing that specific devices which returned true as recently as March 23rd are now returning false today, despite no changes to the OS build or account settings. Does this indicate a change in the server-side eligibility heuristics? Why would isEligibleForAgeFeatures stop returning true for a region where the law is now in force? Has the guidance on how to evaluate these properties for Brazil changed with the transition to the stable 26.4 release? Thank you!

Is there a way to trigger the start of my app (just for a short time) when the iPhone is connected to CarPlay (and/or to a car via bluetooth). I could not find anything. I don´t want to apply for CarPlay as I have no intention to show something on the cars screen. Any even small tipp is welcome

[FB22327481] We are observing a rare issue where alarms scheduled using AlarmKit occasionally fire exactly at 12:00 AM, even though the alarm was scheduled for a different time. This issue happens only for a very small number of users (for example, 1–2 users per several thousand per day), but multiple reports confirm that the alarm goes off exactly at midnight. We also found that other developers are experiencing the same issue: https://developer.apple.com/forums/thread/815714 Observed behavior For a small number of users: Alarm fires at exactly 00:00 (midnight) This happens even when the scheduled alarm time is something like 7:30 AM Happens rarely Hard to reproduce internally Appears to happen only on real devices in production Additional notes We are using AlarmKit fixed schedules (not relative) Dates passed to AlarmKit are correct at scheduling time We do not intentionally create midnight alarms Issue seems random Question Are there any known limitations or edge cases with AlarmKit fixed schedules that could cause alarms to fire at midnight? For example: Invalid date fallback? Schedule expiration fallback? Time zone changes? Background refresh timing? Maximum schedule window? Any guidance would be appreciated, as this is affecting real users but is difficult to reproduce.

Issue: after going through configuration steps for app clips, when I scan my QR code, my app clip does not appear, instead safari attempts to open the url as a web page. note: my aasa endpoint is never even getting called when scanning the QR code. Setup: App uninstalled in accordance with Apple Documentation "Users don’t install App Clips, and App Clips don’t appear on the Home Screen. Similarly, testers don’t install the beta version of your App Clip" testflight installed in accordance with Apple Documentation My app's Build 1.51.9 (1) uploaded and greenlit in testflight. My apple email is added as an internal tester is the same as my Apple ID for the device used. I have provided an aasa for the path: .well-known/apple-app-site-association. Here is my full url: https://akin-server-side-staging.onrender.com/.well-known/apple-app-site-association. { "appclips": { "apps": [ "8PJ28P9ZZ8.com.ElevatedUnderdogs.akin1.Clip" ] }, "applinks": { "details": [ { "components": [ { "/": "/appClips/referral/venueToUser" } ], "appIDs": [ "8PJ28P9ZZ8.com.ElevatedUnderdogs.akin1" ] } ] } } Here are my entitlements for my parent target: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>aps-environment</key> <string>development</string> <key>com.apple.developer.applesignin</key> <array> <string>Default</string> </array> <key>com.apple.developer.associated-domains</key> <array> <string>applinks:akin-server-side.onrender.com</string> <string>applinks:akin-server-side-staging.onrender.com</string> <string>appclips:akin-server-side-staging.onrender.com</string> <string>appclips:akin-server-side.onrender.com</string> </array> <key>com.apple.security.application-groups</key> <array> <string>group.com.ElevatedUnderdogs.akin1</string> </array> </dict> </plist> Here are the entitlements for my app clip target: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>com.apple.developer.associated-domains</key> <array> <string>applinks:akin-server-side-staging.onrender.com</string> <string>applinks:akin-server-side.onrender.com</string> </array> <key>com.apple.developer.parent-application-identifiers</key> <array> <string>$(AppIdentifierPrefix)com.ElevatedUnderdogs.akin1</string> </array> <key>com.apple.security.application-groups</key> <array> <string>group.com.ElevatedUnderdogs.akin1</string> </array> </dict> </plist> On App Store Connect in the Testflight section for this project and build: Build 1.51.9 (1), Test Information -> App Clip Invocations I have the following: copy pasted for convenience: "no variables":"https://akin-server-side-staging.onrender.com/appClips/referral/venueToUser", "Jeff referral":"https://akin-server-side-staging.onrender.com/appClips/referral/venueToUser?venueID=ChIJVaPxJnCej4ARyxiB9Tt2tG8&referrerName=Jeff" Here is the QR code I attempted to scan, https://akin-server-side-staging.onrender.com/appClips/referral/venueToUser?venueID=ChIJVaPxJnCej4ARyxiB9Tt2tG8&referrerName=Jeff

I'd like to create a small helper app for new students do read/write User default settings. Since it was not possible using the UserDefaults class I decided to use the "/usr/bin/defaults". Unfortuntely it seems not to return anything. Debug output shows "Got data: 0 bytes" Here is a sample code: import SwiftUI func readDefaults(domain : String, key :String) -> String { let cmdPath = "/usr/bin/defaults" //let cmdPath = "/bin/ls" let cmd = Process() let pipe = Pipe() cmd.standardOutput = pipe cmd.standardError = pipe cmd.executableURL = URL(fileURLWithPath: cmdPath, isDirectory: false, relativeTo: nil) cmd.arguments = ["read", domain, key] //cmd.arguments = ["/", "/Library"] print("Shell command: \(cmdPath) \(cmd.arguments?.joined(separator: " ") ?? "")") var d : Data? do { try cmd.run() d = pipe.fileHandleForReading.readDataToEndOfFile() cmd.waitUntilExit() } catch let e as NSError { return "ERROR \(e.code): \(e.localizedDescription)" } catch { return "ERROR: call failed!" } // get pipe output and write is to stdout guard let d else { return "ERROR: Can't get pipe output from command!" } print("Got data: \(d)") if let s = String(data: d, encoding: String.Encoding.utf8) { print("Got result: \(s)") return s } else { return "ERROR: No output from pipe." } } struct ContentView: View { let foo = readDefaults(domain: "com.apple.Finder", key: "ShowHardDrivesOnDesktop") var body: some View { VStack { Text("ShowHardDrivesOnDesktop: \(foo.description)") } .padding() } } #Preview { ContentView() } This code works well e.g. for "ls" when the comments are changed for cmdPath and cmd.arguments. What do I miss in order to get it working with defaults?