If an iOS application has a notification service extension which gets sent a push, but the user has not been prompted for notification authorization via requestAuthorization() then what is the expected behavior? Will the push get delivered to the NSE but the resulting notification not displayed? Or will the push not get delivered at all to the NSE?

I have converted a large part of the data, but only 5% of the data was successfully converted. The failed devicetoken shows "bad devicetoken" when accessing APNS. Here are examples of failed conversions devicetoken. Is there any official documentation for this part? DeviceToken Orgin \xc2\xa1\xcb\x9cr\xc3\x81\xe2\x80\x9e\x01b\xc3\xbce1pf\t\xc2\xa7\xc3\x82v}\xc3\xa1\xc3\x9a:?\r\n\xc3\xa5\xc6\x92\xc3\xb7y\xc3\x9e\xe2\x80\x9c\xc3\x89r

Hi all, We’re implementing in-app subscriptions in our iOS app using App Store Server Notifications V2 in the production environment. Everything is generally working well — we receive notifications such as DID_CHANGE_RENEWAL_STATUS, CANCELLATION, etc., and we log all incoming notifications into our own database. However, we've encountered a single case where the INITIAL_BUY notification was not received for a specific user. Interestingly, we did receive the later notifications (DID_CHANGE_RENEWAL_STATUS and CANCELLATION) for that same user. Here is our setup: App Store Server Notifications V2 Notification endpoint is stable and functioning normally (receives and logs other notifications) Notifications are reliably stored in our database The issue occurred only once for one user Environment: Production We've already contacted Apple Developer Support, but were informed that this issue is out of scope for direct support, and were directed to the Developer Forums. Our questions: Under what conditions might the INITIAL_BUY notification fail to be sent or delivered? Is there any known behavior or scenario where Apple may skip the INITIAL_BUY notification? Any recommendations on how to further investigate or verify whether it was sent from Apple’s side? We’ve confirmed that the notification never hit our server (no logs, no DB record), and our system was healthy at the time. Any insight would be greatly appreciated. Thank you!

Hello, We are currently facing a persistent issue where Apple Push Notifications (APNs) are no longer being delivered to devices. This is not an intermittent problem — push notifications have completely stopped working. We are using PushSharp.Apple (Version 4.0.10.0) to send the notifications. Current Behavior (Failing): Every notification request appears to be processed successfully from the server side. However, the APNs client receives a 0-byte response, and the server closes the connection. Devices do not receive the notifications at all. Logs from Current (Failing) State: APNS-Client[1]: Connected (Batch ID=1) APNS-Client[1]: Sent Batch, waiting for possible response... APNS-Client[1]: Received 0 bytes response... APNS-Client[1]: Server Closed Connection... APNS-Client[1]: Disconnected (Batch ID=1) For Reference – Successful Log From Earlier (When Notifications Worked): APNS-Client[1]: Connected (Batch ID=1) APNS-Client[1]: Sent Batch, waiting for possible response... APNS-Client[1]: Received -1 bytes response... Push Notification Successfully Sent to Device Any help, suggestions, or experience with similar issues would be greatly appreciated. Thanks!!!

In iOS 26, I can check the notification that arrives to the user when the AirPods or Apple Watch is fully charged. When tap the notification, notification only expands and does not include actions such as moving to an app. I checked the documents of UserNotification and UNNotificationServiceExtension, but I couldn't find what I wanted. I can expand by long-tapping as default, but I'm looking for a way to expand it without entering the app when I tap the notification. I wonder if there is an API that I missed or if it's not publicly supported. thank you for your support.

I have set up an iOS application with CarPlay scene using carplay-driving-tasks entitlement. And as per latest policy changes I'm able to get push notifications in the CarPlay screen. But unlike from phone scene, when I tap on a notification from CarPlay I don't get a trigger on didReceive method to intercept the payload of the notification that user tapped on. Is there any other ways or configuration needed to get this working? I just need to get the payload and present an Alert template within the CarPlay when user taps on a CarPlay notification and the app opens.

I am developing an iOS app that uses App Store Server API (v2) for auto-renewable subscriptions. I noticed a discrepancy between the expiration date returned by the API and the date displayed in iPhone Settings > Subscriptions: App Store Server API expiresDate: 2025-09-12T12:10:25 (KST) iOS Settings > Subscriptions: 2025-09-11 (one day earlier) My understanding: The API’s expiresDate is the precise UTC timestamp. The Settings UI might display the "last full calendar day" for UX purposes. Questions: Is this behavior (UI showing one day earlier) an intentional Apple policy? If so, is there any official documentation or guideline explaining this behavior? Should developers always rely on the API’s expiresDate for subscription state management? This discrepancy is confusing for both developers and end users, so any clarification or official reference would be greatly appreciated.

Hi, I’m having issues with push notifications on my phone across multiple apps. When someone sends me a message, I only receive the notification 10 to 15 minutes later. For example, on WhatsApp, people say that my chat only shows one checkmark when they send me a message. I don’t know what else to do. I’ve already contacted Apple Support, visited an Apple-affiliated physical store, and followed all the recommended procedures. This is my first time using an iPhone—I bought it for professional use, but it’s practically useless if I don’t receive notifications instantly. They even told me that if I send it in for warranty service, there’s a 90% chance they won’t detect the issue, and the iPhone will come back with the same problem.

We're trying to add simple notifications to our CarPlay integration that should open certain template when pressed, but the issue is that when pressing this notification on CarPlay screen nothing is invoked in the code (presumably didReceive should be invoked). All works fine with the same notification but pressed on the iPhone screen - didReceive is invoked properly. How should I handle the action when push notification is pressed on CarPlay screen?

token:009739d008a19dbe7e2273a1e4e8b5f73c4e2d7e220e7308f41e316f4c2fcf56 最近app无法收到服务端通过apns推送的通知，提交是成功的，但是app的所有用户都无法收到通知

We have a question regarding iOS app configuration and the Remote notifications background mode. During our testing, we observed: ＊When enabling or disabling Signing & Capabilities > Background Modes > Remote notifications, the change does not take effect on devices that already have the app installed. ＊The app continues to behave according to the old configuration. ＊Only after uninstalling the app and reinstalling it from the App Store do the new settings take effect (for example, whether the app can be woken up by silent push). ＊We also tested updating the app with a new version number (App Store upgrade flow), but the new settings still did not apply. Our questions are: 1.Is there any way to make iOS re-read the updated Signing & Capabilities (Background Modes) settings without requiring a full uninstall/reinstall? 2.Is it expected behavior that even an App Store upgrade with a new version number will not apply these changes? thanks!

i hava a app using Gateway.push.apple.com to push Notifications,but it is not working sine last month, i test the api show push Notifications success but my device can't receive the Notifications ,is this api not working anymore ? but why the api show push Notifications success ?

Could anyone play a sound from the Library/Sounds directory using alarmkit? Same file can play in app bundle, but not available in Library/Sounds directory. Is this by design?

Hi team, I am developing VOIP feature using PushKit and CallKit but CallKit is not show when app in background or terminate state, now in foreground state I can call reportNewIncomingCall from pushRegistry-didReceiveIncomingPushWith and it's work as expected but the problem is in background or terminate state it's not my setup: PushKit is configured In Signing & Capabilities I add background modes (Remote notifications and Voice over IP) In info.plist I add <key>UIBackgroundModes</key> <array> <string>voip</string> I'm not sure should I create new VOIP Certificate but now I can receive message notification normally. Any help or suggestions would be greatly appreciated Thank you

I’m using the shielding API, my code: let store = ManagedSettingsStore() let whitelist = SharedDefaults.whitelistApplications store.shield.applicationCategories = .all(except: whitelist) And to clear the shield, my code is: store.shield.applications = nil store.shield.applicationCategories = nil The issue: Some users report that after uninstalling my app, the shield is still active, and the UI changes to the default iOS system interface. Even after restarting the device, the apps on the phone remains locked, so the user has no way to remove the shield. Recently I’ve received several complaints on social media and App Store comments, accusing my app of being malicious software. This is not a 100% reproducible bug, but it happens frequently enough. I was also able to reproduce it myself by uninstalling the app during an active lock session. Could Apple engineers please look into this issue and advise how to ensure that once the user uninstalls the app, the device is no longer locked?

Hello everyone, I have been working on a macOS app that utilizes push notifications for the past year. Up until recently, everything was functioning correctly. However, now I'm experiencing issues where push notifications are either not being delivered at all or are experiencing significant delays, sometimes up to 10 minutes. Setting the priority header to 10 hasn't made any difference. I am currently using development push notifications, but the issue persists when switching to the production environment. I'm curious if anyone else has encountered similar problems. When checking the push console, it frequently reports that the device is offline, even though it's actually online ("discarded as device was offline"). Occasionally, notifications are delivered promptly, but this is becoming increasingly infrequent. This issue has been consistently reported by our testers, particularly after they updated to macOS Sonoma. Any insights or assistance you can provide would be greatly appreciated.

When the app kills the process. Received APNs push message. Push messages carry voice related information. At the same time as receiving the push, obtain the voice playback of this voice message. How to achieve it?

Hi Team, We’re following up on our request for the Critical Alert entitlement for our app, which we plan to use to notify users about critical states of their devices. It’s been almost 4 weeks since we submitted the request, and we wanted to check on the typical review timeline so we can plan our upcoming work accordingly. If there’s anything we can provide or clarify to help complete the review or make the process easier, we’d be happy to assist. or the right forum to reach out to.

Hi, We have a use case where our app needs to send repeated push notifications (both normal and critical alerts) to inform the user about a critical device state and grab their attention. Since iOS doesn’t allow us to schedule local notifications beyond 30 seconds, I need to send multiple pushes from the server side. My questions are: Is there any documented limit on how many push notifications can be sent back-to-back before Apple starts throttling or restricting them? Are critical alerts treated differently from normal notifications in terms of delivery restrictions or frequency limits? Is there a recommended approach for handling scenarios where repeated urgent notifications are necessary to keep the user informed? I want to make sure I’m following Apple’s guidelines and not risking rejection during review.

I wanted to know if Apple ever supported displaying a red dot on notificationswith no indication number.