I'm encountering an issue with HealthKit permissions and would appreciate some guidance: In my app's previous version, I granted write permissions for HKObjectType.workoutType() via the WatchKitExtension. Now, in the upcoming version, I'm trying to request read permissions for both HKObjectType.workoutType() and HKSeriesType.workoutRoute() via the iOS app. However, after granting access: The read permissions for Workout and Workout Route don't show up under Settings -> Health -> Data and Access -> [My App]. The Workout Route permission status remains notDetermined, even though I selected "Allow" when prompted. Interestingly, if I request the same permissions via the WatchKitExtension, everything works as expected, and the issue doesn't occur. Has anyone experienced a similar issue or have insights into why this might be happening? Could it be related to requesting permissions from the iOS app instead of the WatchKitExtension?

I attempted to reset the Watch SE, which is currently running 10.6.1 and enrolled in Beta updates. My iPhone is updated to 18.2, but the Watch app isn't showing any available updates.

I "upgraded" to 18.1 and then 18.2 and have been experiencing repeated mail errors on my phone. Numerous calls to Apple, restarting, removing, adding etc. Apple thought it is a gmail server issue but now I think it is an IOS issue. This is very very frustrating....any other simple solutions other than changing back to a 17 version?

Finder only shows the iCloud tabs and not the others. How can I fix this? Is there a way to reset Finder?

I recorded a 20 minute session with my iPhone 11 Pro running ios 18.1.1. It was in 4K however, my phone had 130GB of free space! Halfway along the recording it displayed the error that my storage was full, and that recording stopped. I then proceeded to go to settings and check the storage, still 127 GB free. I have iCloud photos on, and my media is syncing.

So the App Store got deleted or something after I got iOS 18 so then I asked Siri to open it for me and it said un supported URL

I bought a new 16 pro, tried to transfer by transfer on first startup from 15 pro max all data. I have 15 pro max on 18.2 beta. During the transfer process it requested an upgrade on the 16 pro to the beta. Now when I try to swipe up it doesn't open the code screen, as if I bring my finger to some part of the screen and the shutter immediately bounces back, for a split second I see the unlock screen with keyboard. (The screen and touchscreen were fine). The phone is getting very warm, charging. I never finished the transfer from the old iPhone. It turned out during the migration I got to the stage where it asked to upgrade to the beta version. I agreed, the phone updated and got this. Macbook can't see the new iPhone. Dynamic Island shows a closed lock at the top. Hard reset doesn't help, the problem persists. What to do? https://youtu.be/Q8JZRdg2gms

Hi community! I have come across a situation where I want to select a text in my iPhone by pressing the spacebar on my keyboard and then holding with another finger on any other part of the keyboard to move the spacebar finger freely and start selecting text. I hope I was clear about which function I am referring to. The issue however is that I often find myself selecting more than I wanted (going over to the next characters by one or two) and I can’t go back. This might be a very small detail, but I really think it can be beneficial to change the function so that your selecting point is a pivot and the sliding finger moves the selection to the right and left from the same end of the selection area. Right now, when moving the finger to the right or left, the text selection gets larger from each side of the selection, but it can’t be shortened when a mistake like going over happens, at least in the same maneuver. I believe it’s very easy to select the desired pivot where the selection will start, because the user can first hold and slide the spacebar to locate the vertical bar in the text and then hold with second finger to start selecting. That means that being able to move both ends of the selection area is not necessarily providing a uniquely useful advantage. Thanks for reading, I hope someone understands what I am saying and the apple community is able to fix this inconvenience.

I'm working on setting app-site-association for my site. I've added the app-site-association file to public/.well-known/app-site-association and confirmed that my file made it to apple CDN. I've also checked it on branch.io. The problem is, when I head to my site I get a 404. I checked sysdiagnose logs and can see the same Error Domain=SWCErrorDomain Code=7 "SWCERR00101 Bad HTTP Response: 404 Not Found -- {"status":"404 Not Found"}" UserInfo={Line=275, Function=-[SWCDownloader. URLSession:dataTask:didReceiveResponse:completionHandler:], NSDebugDescription=SWCERR00101 Bad HTTP Response: 404 Not Found -- {"status":"404 Not Found"}, UnderlyingError=Error Domain=HTTP Code=404 "(null)" UserInfo={Line=275, Function=-[SWCDownloader URLSession:dataTask:didReceiveResponse:completionHandler:]}} I'm not really sure where to go from here.

post detail almost same as the title of the post, can’t enable the option. That is apple is already to provide of the always display option for 16 normal series?

Hi, i bought iphone 16 plus in mid of november and currently on ios 18.2 (beta 4). It was automatically upgraded in my phone. Now the problem i'm facing is the whatsapp notifications. the summarise notifications is not working for whatsapp only. when i receive the msg and my screen is on, i see 1-2-3 msgs on whatsapp icon but got the notifications after 10 seconds. moreover, when i'm texting someone and chat is open during texting i only see single tick on my msgs and when i close my chat then double tick appears. all other apps are working fine. only whatsapp creating this issue. i have reinstalled it, updated it did everything but problem remains same.

This inquiry concerns how cellular data is managed on the Apple Watch with WatchOS 11. All the following scenarios assume that the Apple Watch is activated with a cellular plan and cellular functionality is enabled. Up to WatchOS 10(Including 8 and 9), if a specific app’s cellular data toggle was turned off in the Apple Watch’s cellular settings (Settings → Cellular → Cellular Data Usage), the app could still update its data using the iPhone’s cellular data instead of the Watch’s cellular data. In other words: When the app’s cellular data is enabled on the Watch: Apple Watch → (uses Watch’s cellular data to receive data) → App data updates on the Watch. When the app’s cellular data is disabled on the Watch: Apple Watch → (fails to receive data using Apple Watch’s cellular data) → (attempts to use iPhone’s cellular data to receive data) → App data updates on the Watch. However, starting with WatchOS 11: When an app’s cellular data is turned off on the Watch, it fails to receive data outright without attempting to use the iPhone’s cellular data as a fallback. This effectively means that cellular data usage for the Apple Watch and the iPhone can no longer be managed separately when the Watch is on a cellular plan. This behavior is causing significant issues for the app I’ve developed, as this separation of data management was critical for its functionality. It has led to major disruptions in sales. Is this a bug in WatchOS 11, or is this an intentional change? If it is intentional, I strongly believe users should be given an option to manage this behavior. Please provide a response as this issue is extremely critical.

Why is the language character obtained by NSLocale.preferred Languages sometimes zh Han HK and sometimes zh HK? What kind of setting determines the value of this character

My post i the general forum was deleted because I am running on Sequoia beta. The issue seems to occur regardless of macOS version. MacBook Air (M1, 2020): Trackpad reacts to the slightest touch, either moving thw cursor or clickin. Obviously I have adjusted settings and it's still too sensitive. If I don't take my fingers completely away from the trackpad as I use it, I often find new windows opening, dialog boxes popping up, ads getting clicked on, etc. I have gone into trackpad preferences several times and adjusted everything I can find that ought to help and it doesn't. Disabling “touch to click” remedies the unintentional clicks, although I would like to keep that functionality of workin as intended. The other nuisances remain.

let schedule = DeviceActivitySchedule( intervalStart: startInterval, intervalEnd: endInterval, repeats: false, warningTime : DateComponents(hour : 0 , minute: 0 , second: 30) ) ``` I hope it will only be executed on the same day, but the monitoring is still there the next day. My system version is 18.2

I got 16 pro max and did restore from iCloud. all system files are downloaded but apps are getting stack at roughly 60% tried to delete the app and download via AppStore hard reset changing language go on different wifi and use mobile data as well Any idea how to fix?

My account was hacked and this was purchased through it. Im hoping someone sees this so and that ive left my mark that i got into his developer account be sheer luck and determination. Ive tried to gain access back into my apple id account with no luck, even contacting apple support. They got into all my online accounts. Im hoping something can be done eventually, but untill then, whoever is controlling my account and incase i get kicked off, cer i grafu!

I applied for an app to the store the other day, and It has been Rejcted due to the following reasons. ITMS-90433 Invalid Swift support - File libswiftCore.dylib does not have the correct code signature. Make sure you're using the correct signature, rebuild your app using the current public (GM) version of Xcode, and resubmit. Don't just change the code signature of libswiftCore.dylib. ーーー For the application side, Xcode 15.4 was used. but, only libswiftCore.dylib was build with Xcode 16. However, this is not a beta version. When implementing a build,"clean all" has been carried out. Is the cause due to an Xcode version mismatch? I want someone to tell me the reason.

In our iOS app we have added example.com in associated domains from the very beginning With no AASA file hosted at example.com domain Now we need a subdomain app.example.com to be intercepted in our app, so for the same, we are thinking to host AASA at app.example.com and add app.example.com in associated domains too. so my question is will hosting AASA at sub domain works? If yes, will it affect older apps where app.example.com is not handled. In short we only want the links with app.example.com to be open in our app not the example.com links

Hi, I’m running out of hard disk space on my Mac mini and am considering moving all of my projects to iCould. But I need to know if anyone else has done this and if iCloud would be a viable option working with Xoode and if said idea would be able to keep up with any update(s) that I’d make to an app. Thank you, Dan Uff