I've got a setup using AVAudioEngine with several tone generator nodes, each with a chain of processing nodes, the chains then mixed into the main output. Generator ➡️ Effect ➡️... ➡️ .mainMixerNode ➡️ .outputNode). Generator ➡️ Effect ➡️... ⤴️ ... Generator ➡️ Effect ➡️... ⤴️ The user should be able to mute any chain individually. I've found several potential approaches to muting, but not terribly happy with any of them. Adjust the amplitudes directly in my tone generators. Issue: Consumes CPU even when completely muted. 4 generators adds ~15% cpu, even when all chains are muted. Detach/attach chains that are muted/unmuted. Issue: Causes loud clicking/popping sounds whenever muted/unmuted. Fade mixer output volume while detaching/attaching a chain (just cutting the volume immediately to 0 doesn't get rid of the clicking/popping). Issue: Causes all channels to fade during the transition, so not ideal. The rest of these ideas are variations on making volume control+detatch/attach work for individual chains, since approach #3 worked well. Add an AVAudioMixer to the end of each chain (just for volume control). Issue: Only the mixer on the final chain functions -- the others block all output. Not sure what's going on there. Use matrix mixer (for multi-input volume control). Plus detach/attach to reduce CPU if necessary. Not yet attempted, due to perceived complexity and reports of fragility in order of wiring in. A bunch of effort before I even know if it's going to work. Develop my own fader node to put on the end of each channel. Unlike the tone generator (simple AVSourceNode), developing an effect node seems complex and time consuming. Might not even fix CPU use. I'm not completely averse to the learning curve of either 5 or 6, but would rather get some guidance on best approach before diving in. They both seem likely to take more effort than I'd like for the simple behavior I'm trying to achieve.

Hi, In my project I am using AVFoundation for recording the audio. We are using AVAudioMixerNode class below method to record the audio packet. **func installTap( onBus bus: AVAudioNodeBus, bufferSize: AVAudioFrameCount, format: AVAudioFormat?, block tapBlock: @escaping AVAudioNodeTapBlock ) ** It works perfectly fine. But in production env some small percentage of the user we are facing issue like after recording few packets it stops automatically without stopping the audio engine. Can anyone help here that why this happens? I have also observed for mediaServicesWereResetNotification and added log on receiving this notification but when this issue happens I don't see any occurence of this log. Also is there any callback when the engine stops?

I developed an educational app that implements audio-video communication through RTC, while using WebView to display course materials during classes. However, some users are experiencing an issue where the audio playback from WebView is very quiet. I've checked that the AVAudioSessionCategory is set by RTC to AVAudioSessionCategoryPlayAndRecord, and the AVAudioSessionCategoryOption also includes AVAudioSessionCategoryOptionMixWithOthers. What could be causing the WebView audio to be suppressed, and how can this be resolved?

I’m developing a macOS audio monitoring app using AVAudioEngine, and I’ve run into a critical issue on macOS 26 beta where AVFoundation fails to detect any input devices, and AVAudioEngine.start() throws the familiar error 10877. FB#: FB19024508 Strange Behavior: AVAudioEngine.inputNode shows no channels or input format on bus 0. AVAudioEngine.start() fails with -10877 (AudioUnit connection error). AVCaptureDevice.DiscoverySession returns zero audio devices. Microphone permission is granted (authorized), and the app is properly signed and sandboxed with com.apple.security.device.audio-input. However, CoreAudio HAL does detect all input/output devices: Using AudioObjectGetPropertyDataSize and AudioObjectGetPropertyData with kAudioHardwarePropertyDevices, I can enumerate 14+ devices, including AirPods, USB DACs, and BlackHole. This suggests the lower-level audio stack is functional. I have tried: Resetting CoreAudio with sudo killall coreaudiod Rebuilding and re-signing the app Clearing TCC with tccutil reset Microphone Running on Apple Silicon and testing Rosetta/native detection via sysctl.proc_translated Using a fallback mechanism that logs device info from HAL and rotates logs for submission via Feedback Assistant I have submitted logs and a reproducible test case via Feedback Assitant : FB#: FB19024508]

I prefer to use the album fetched from the library instead of the catalog since this is faster. If doing so, how can I check if all tracks of an album are added to the library. In this case I'd like to fetch the catalog version or throw an error (for example when offline). Using .with(.tracks) on the library album fetches the tracks added to the library. The trackCount property is referring to the tracks that can be fetched from the library. The isComplete property is always nil when fetching from the library. One possible way is checking the trackNumber and discCount properties. However this only detects that not all tracks of an album are added to the library if there is a song not added ahead of one that is. I'd like to be able to handle this edge case as well. Is there currently a way to do this? I'd prefer to not rely on the apple music catalog for this since this is supposed to work offline as well. Fetching and storing all trackIDs when connected and later comparing against these would work, but this would potentially mean storing tens of thousands of track ids. Thank you

Does anyone know how to pronounce the sound of a specific instrument when you tap a button on the screen on your iPhone or iPad? Now, in the middle of creating a music learning app, I'm thinking of assigning monotones or chords to the button-like frames on the keyboard and fingerboard on the screen. Can it be achieved with SwiftUI chords alone? Once upon a time, MIDI level 1 I remember that there was a pronunciation function of the instrument, but I don't think about implementing the same function in the current OS. Please lend me your wisdom.

Since iOS 18, the system setting “Allow Audio Playback” (enabled by default) allows third-party app audio to continue playing while the user is recording video with the Camera app. This has created a problem for the app I’m developing. ➡️ The problem: My app plays continuous audio in both foreground and background states. If the user starts recording video using the iOS Camera app, the app’s audio — still playing in the background — gets captured in the video — obviously an unintended behavior. Yes, the user could stop the app manually before starting the video recording, but that can’t be guaranteed. As a developer, I need a way to stop the app’s audio before the video recording begins. So far, I haven’t found a reliable way to detect when video recording starts if ‘Allow Audio Playback’ is ON. ➡️ What I’ve tried: — AVAudioSession.interruptionNotification → doesn’t fire — devicesChangedEventStream → not triggered I don’t want to request mic permission (app doesn’t use mic). also, disabling the app from playing audio in the background isn’t an option as it is a crucial part of the user experience ➡️ What I need: A reliable, supported way to detect when the Camera app begins video recording, without requiring mic access — so I can stop audio and avoid unintentional overlap with the user’s recordings. Any official guidance, workarounds, or AVFoundation techniques would be greatly appreciated. Thanks.

Hello, i can successfully match music using shazamkit on Apple using SwiftUI, a simple app that let user to load an audio file and exctracts the relative match, while i am unable to match music using shamzamkit on Android. I am trying to make the same simple app but i cannot match music as i get MATCH_ATTEMPT_FAILED every time i try to. I don't know what i am doing wrong but the shazam part in the kotlin Android code is in this method : suspend fun processAudioFileInBackground( filePath: String, developerTokenProvider: DeveloperTokenProvider ) = withContext(Dispatchers.IO) { val bufferSize = 1024 * 1024 val audioFile = FileInputStream(filePath) val byteBuffer = ByteBuffer.allocate(bufferSize) byteBuffer.order(ByteOrder.LITTLE_ENDIAN) var bytesRead: Int while (audioFile.read(byteBuffer.array()).also { bytesRead = it } != -1) { val signatureGenerator = (ShazamKit.createSignatureGenerator(AudioSampleRateInHz.SAMPLE_RATE_44100) as ShazamKitResult.Success).data signatureGenerator.append(byteBuffer.array(), bytesRead, System.currentTimeMillis()) val signature = signatureGenerator.generateSignature() println("Signature: ${signature.durationInMs}") val catalog = ShazamKit.createShazamCatalog(developerTokenProvider, Locale.ENGLISH) val session = (ShazamKit.createSession(catalog) as ShazamKitResult.Success).data val matchResult = session.match(signature) println("MatchResult : $matchResult") setMatchResult(matchResult) byteBuffer.clear() } audioFile.close() } I noticed that changing Locale in catalog creation results in different result as i get NoMatch without exception. Can you please help me with this? Do i need to create a custom catalog?

In my app I use AVAssetReaderTrackOutput to extract PCM audio from a user-provided video or audio file and display it as a waveform. Recently a user reported that the waveform is not in sync with his video, and after receiving the video I noticed that the waveform is in fact double as long as the video duration, i.e. it shows the audio in slow-motion, so to speak. Until now I was using CMFormatDescription.audioStreamBasicDescription.mSampleRate which for this particular user video returns 22'050. But in this case it seems that this value is wrong... because the audio file has two audio channels with different sample rates, as returned by CMFormatDescription.audioFormatList.map({ $0.mASBD.mSampleRate }) The first channel has a sample rate of 44'100, the second one 22'050. If I use the first sample rate, the waveform is perfectly in sync with the video. The problem is given by the fact that the ratio between the audio data length and the sample rate multiplied by the audio duration is 8, double the ratio for the first audio file (4). In the code below this ratio is given by Double(length) / (sampleRate * asset.duration.seconds) When commenting out the line with the sampleRate variable definition in the code below and uncommenting the following line, the ratios for both audio files are 4, which is the expected result. I would expect audioStreamBasicDescription to return the correct sample rate, i.e. the one used by AVAssetReaderTrackOutput, which (I think) somehow merges the stereo tracks. The documentation is sparse, and in particular it’s not documented whether the lower or higher sample rate is used; in this case, it seems like the higher one is used, but audioStreamBasicDescription for some reason returns the lower one. Does anybody know why this is the case or how I should extract the sample rate of the produced PCM audio data? Should I always take the higher one? I created FB19620455. let openPanel = NSOpenPanel() openPanel.allowedContentTypes = [.audiovisualContent] openPanel.runModal() let url = openPanel.urls[0] let asset = AVURLAsset(url: url) let assetTrack = asset.tracks(withMediaType: .audio)[0] let assetReader = try! AVAssetReader(asset: asset) let readerOutput = AVAssetReaderTrackOutput(track: assetTrack, outputSettings: [AVFormatIDKey: Int(kAudioFormatLinearPCM), AVLinearPCMBitDepthKey: 16, AVLinearPCMIsBigEndianKey: false, AVLinearPCMIsFloatKey: false, AVLinearPCMIsNonInterleaved: false]) readerOutput.alwaysCopiesSampleData = false assetReader.add(readerOutput) let formatDescriptions = assetTrack.formatDescriptions as! [CMFormatDescription] let sampleRate = formatDescriptions[0].audioStreamBasicDescription!.mSampleRate //let sampleRate = formatDescriptions[0].audioFormatList.map({ $0.mASBD.mSampleRate }).max()! print(formatDescriptions[0].audioStreamBasicDescription!.mSampleRate) print(formatDescriptions[0].audioFormatList.map({ $0.mASBD.mSampleRate })) if !assetReader.startReading() { preconditionFailure() } var length = 0 while assetReader.status == .reading { guard let sampleBuffer = readerOutput.copyNextSampleBuffer(), let blockBuffer = sampleBuffer.dataBuffer else { break } length += blockBuffer.dataLength } print(Double(length) / (sampleRate * asset.duration.seconds))

Does an artist similarity station broaden selection variety compared to a song similarity station? You don't have to answer if it is against nondisclosure terms.

Hello! I'm experiencing an issue with iOS's audio routing system when trying to use Bluetooth headphones for audio output while also recording environmental audio from the built-in microphone. Desired behavior: Play audio through Bluetooth headset (AirPods) Record unprocessed environmental audio from the iPhone's built-in microphone Actual behavior: When explicitly selecting the built-in microphone, iOS reports it's using it (in currentRoute.inputs) However, the actual audio data received is clearly still coming from the AirPods microphone The audio is heavily processed with voice isolation/noise cancellation, removing environmental sounds Environment Details Device: iPhone 12 Pro Max iOS Version: 18.4.1 Hardware: AirPods Audio Framework: AVAudioEngine (also tried AudioQueue) Code Attempted I've tried multiple approaches to force the correct routing: func configureAudioSession() { let session = AVAudioSession.sharedInstance() // Configure to allow Bluetooth output but use built-in mic try? session.setCategory(.playAndRecord, options: [.allowBluetoothA2DP, .defaultToSpeaker]) try? session.setActive(true) // Explicitly select built-in microphone if let inputs = session.availableInputs, let builtInMic = inputs.first(where: { $0.portType == .builtInMic }) { try? session.setPreferredInput(builtInMic) print("Selected input: \(builtInMic.portName)") } // Log the current route let route = session.currentRoute print("Current input: \(route.inputs.first?.portName ?? "None")") // Configure audio engine with native format let inputNode = audioEngine.inputNode let nativeFormat = inputNode.inputFormat(forBus: 0) inputNode.installTap(onBus: 0, bufferSize: 1024, format: nativeFormat) { buffer, time in // Process audio buffer // Despite showing "Built-in Microphone" in route, audio appears to be // coming from AirPods with voice isolation applied - welp! } try? audioEngine.start() } I've also tried various combinations of: Different audio session modes (.default, .measurement, .voiceChat) Different option combinations (with/without .allowBluetooth, .allowBluetoothA2DP) Setting session.setPreferredInput() both before and after activation Diagnostic Observations When AirPods are connected: AVAudioSession.currentRoute.inputs correctly shows "Built-in Microphone" after setPreferredInput() The actual audio data received shows clear signs of AirPods' voice isolation processing Background/environmental sounds are actively filtered out... When recording a test audio played near the phone (not through the app), the recording is nearly silent. Only headset voice goes through. Questions Is there a workaround to force iOS to actually use the built-in microphone while maintaining Bluetooth output? Are there any lower-level configurations that might resolve this issue? Any insights, workarounds, or suggestions would be greatly appreciated. This is blocking a critical feature in my application that requires environmental audio recording while providing audio feedback through headphones 😅

A bit of a novice to app development here but I have a paid developer account, I have registered the identifier for MusicKit on the developer website (using the bundle identifier I've selected in Xcode) but the option to add MusicKit as a capability is not available in Xcode? I've manually updated the certificates, closed the app and reopened it, started a new project and tried with a different demo project? Apologies if I am missing something obvious but could someone help me get this capability added?

I am trying to get MIDI output from the AU Host demo app using the recent MIDI processor example. The processor works correctly in Logic Pro, but I cannot send MIDI from the AUv3 extension in standalone mode using the default host app to another program (e.g., Ableton). The MIDI manager, which is part of the standalone host app, works fine, and I can send MIDI using it directly—Ableton receives it without issues. I have already set the midiOutputNames in the extension, and the midiOutBlock is mapped. However, the MIDI data from the AUv3 extension does not reach Ableton in standalone mode. I suspect the issue is that midiOutBlock might never be called in the plugin, or perhaps an input to the plugin is missing, which prevents it from sending MIDI. I am currently using the default routing. I have modified the MIDI manager such that it works well as described above. Here is a part of my code for SimplePlayEngine.swift and my MIDIManager.swift for reference: @MainActor @Observable public class SimplePlayEngine { private let midiOutBlock: AUMIDIOutputEventBlock = { sampleTime, cable, length, data in return noErr } var scheduleMIDIEventListBlock: AUMIDIEventListBlock? = nil public init() { engine.attach(player) engine.prepare() setupMIDI() } private func setupMIDI() { if !MIDIManager.shared.setupPort(midiProtocol: MIDIProtocolID._2_0, receiveBlock: { [weak self] eventList, _ in if let scheduleMIDIEventListBlock = self?.scheduleMIDIEventListBlock { _ = scheduleMIDIEventListBlock(AUEventSampleTimeImmediate, 0, eventList) } }) { fatalError("Failed to setup Core MIDI") } } func initComponent(type: String, subType: String, manufacturer: String) async -> ViewController? { reset() guard let component = AVAudioUnit.findComponent(type: type, subType: subType, manufacturer: manufacturer) else { fatalError("Failed to find component with type: \(type), subtype: \(subType), manufacturer: \(manufacturer))" ) } do { let audioUnit = try await AVAudioUnit.instantiate( with: component.audioComponentDescription, options: AudioComponentInstantiationOptions.loadOutOfProcess) self.avAudioUnit = audioUnit self.connect(avAudioUnit: audioUnit) return await audioUnit.loadAudioUnitViewController() } catch { return nil } } private func startPlayingInternal() { guard let avAudioUnit = self.avAudioUnit else { return } setSessionActive(true) if avAudioUnit.wantsAudioInput { scheduleEffectLoop() } let hardwareFormat = engine.outputNode.outputFormat(forBus: 0) engine.connect(engine.mainMixerNode, to: engine.outputNode, format: hardwareFormat) do { try engine.start() } catch { isPlaying = false fatalError("Could not start engine. error: \(error).") } if avAudioUnit.wantsAudioInput { player.play() } isPlaying = true } private func resetAudioLoop() { guard let avAudioUnit = self.avAudioUnit else { return } if avAudioUnit.wantsAudioInput { guard let format = file?.processingFormat else { fatalError("No AVAudioFile defined.") } engine.connect(player, to: engine.mainMixerNode, format: format) } } public func connect(avAudioUnit: AVAudioUnit?, completion: @escaping (() -> Void) = {}) { guard let avAudioUnit = self.avAudioUnit else { return } engine.disconnectNodeInput(engine.mainMixerNode) resetAudioLoop() engine.detach(avAudioUnit) func rewiringComplete() { scheduleMIDIEventListBlock = auAudioUnit.scheduleMIDIEventListBlock if isPlaying { player.play() } completion() } let hardwareFormat = engine.outputNode.outputFormat(forBus: 0) engine.connect(engine.mainMixerNode, to: engine.outputNode, format: hardwareFormat) if isPlaying { player.pause() } let auAudioUnit = avAudioUnit.auAudioUnit if !auAudioUnit.midiOutputNames.isEmpty { auAudioUnit.midiOutputEventBlock = midiOutBlock } engine.attach(avAudioUnit) if avAudioUnit.wantsAudioInput { engine.disconnectNodeInput(engine.mainMixerNode) if let format = file?.processingFormat { engine.connect(player, to: avAudioUnit, format: format) engine.connect(avAudioUnit, to: engine.mainMixerNode, format: format) } } else { let stereoFormat = AVAudioFormat(standardFormatWithSampleRate: hardwareFormat.sampleRate, channels: 2) engine.connect(avAudioUnit, to: engine.mainMixerNode, format: stereoFormat) } rewiringComplete() } } and my MIDI Manager @MainActor class MIDIManager: Identifiable, ObservableObject { func setupPort(midiProtocol: MIDIProtocolID, receiveBlock: @escaping @Sendable MIDIReceiveBlock) -> Bool { guard setupClient() else { return false } if MIDIInputPortCreateWithProtocol(client, portName, midiProtocol, &port, receiveBlock) != noErr { return false } for source in self.sources { if MIDIPortConnectSource(port, source, nil) != noErr { print("Failed to connect to source \(source)") return false } } setupVirtualMIDIOutput() return true } private func setupVirtualMIDIOutput() { let virtualStatus = MIDISourceCreate(client, virtualSourceName, &virtualSource) if virtualStatus != noErr { print("❌ Failed to create virtual MIDI source: \(virtualStatus)") } else { print("✅ Created virtual MIDI source: \(virtualSourceName)") } } func sendMIDIData(_ data: [UInt8]) { print("hey") var packetList = MIDIPacketList() withUnsafeMutablePointer(to: &packetList) { ptr in let pkt = MIDIPacketListInit(ptr) _ = MIDIPacketListAdd(ptr, 1024, pkt, 0, data.count, data) if virtualSource != 0 { let status = MIDIReceived(virtualSource, ptr) if status != noErr { print("❌ Failed to send MIDI data: \(status)") } else { print("✅ Sent MIDI data: \(data)") } } } } }

Hi, I've had a new deck installed in my car for about 1.5 weeks. I'm having compatibility issues with my 15PM. It happens both wired and wirelessly, I get the error "Accessory not supported by this device". It used to happen all the time, now it's 50/50. Sometimes it works. I've removed and added Bluetooth multiple times on phone and deck, I bought a belkin usb-c to usb-a cable today and it seems to fix it but the problem comes back. I've changed the setting "FaceID and passcode-allow access when locked-accessories." The car stereo guy reckons it's definitely an issue with the phone not the deck, I'm inclined to believe him since the error states "by this device". Any advice appreciated.

Issue Description I'm implementing a system audio capture feature using AudioHardwareCreateProcessTap and AudioHardwareCreateAggregateDevice. The app successfully creates the tap and aggregate device, but when starting the IO procedure with AudioDeviceStart, it sometimes fails with OSStatus error 1852797029. (The operation couldn’t be completed. (OSStatus error 1852797029.)) The error occurs inconsistently, which makes it particularly difficult to debug and reproduce. Questions Has anyone encountered this intermittent "nope" error code (0x6e6f7065) when working with system audio capture? Are there specific conditions or system states that might trigger this error sporadically? Are there any known workarounds for handling this intermittent failure case? Any insights or guidance would be greatly appreciated. I'm wondering if anyone else has encountered this specific "nope" error code (0x6e6f7065) when working with system audio capture.

Session player regions populate blank, with no sound media when tracks or regions are created.

Hello, I'm evaluating the Apple Music Feed dataset and I noticed that the total number of songs available in the feed is too small. As of today, the number of objects returned in each feed is: 51,198,712 albums 23,093,698 artists 173,235,315 songs This gives an average of 3.38 songs per album which is quite low. Also, iterating on the data I see that there are albums referencing songs that don't exist in the songs feed. I would like to know: Is the feed data incomplete? If so, in what situations an object may be missing from the feed? Thank you in advance!

Hi 👋! We have a SpriteKit-based app where we play AVAudio sounds in three different ways: Effects (incl. UI sounds) with AVAudioPlayer. Long looping tracks with AVAudioPlayer. Short animation effects on the timeline of SpriteKit's SKScene files (effectively SKAudioNode nodes). We've found that when you exit the app or otherwise interrupt audio plays, future audio plays often fail. For example, there's a WebKit-based video trailer inside the app, and if you play it, our looping background music track (2.) will stop playing, and won't resume as you close the trailer (return from WebKit). This is probably due to us not manually restarting the track (so may well be easily fixed). Periodically played AVAudioPlayer audio (1.) are not affected. However, the more concerning thing is that the audio tracks on SKScene file timelines (3.) will no longer play. My hypothesis is that AVAudioEngine gets interrupted, and needs to be restarted for those AVAudioNode elements to regain functionality. Thing is, we don't deal with AVAudioEngine at all currently in the app, meaning it is never initiated to begin with. Obviously things return to normal when you remove the app from short-term memory and restart it. However, it seems many of our users aren't doing this, and often report audio failing presumably due to some interruption in the past without the app ever being cleared from memory. Any idea why timeline-run SKAudioNodes would fail like this? Should the app react to app backgrounding/foregrounding regarding audio? Any help would be very much appreciated ✌️!

I’m running HomePod OS 26 on two HomePod minis and OS 18.6 on main HomePod (original) I’ve enabled Crossfade in the Home app. I’m playing Apple Music directly in the HomePod mini. Crossfade just doesn’t work on any HomePod. I can understand it not working on the HomePod - but why isn’t it working on the minis running OS 26? I’ve tried disabling and enabling Crossfade, rebooting HomePods etc but nothing?!

Hi all, i can successfully match music using shazamkit on Apple using SwiftUI, a simple app that let user to load an audio file and exctracts the relative match, while i am unable to match music using shamzamkit on Android. I am trying to make the same simple app but i cannot match music as i get MATCH_ATTEMPT_FAILED every time i try to. I don't know what i am doing wrong but the shazam part in the kotlin Android code is in this method : suspend fun processAudioFileInBackground( filePath: String, developerTokenProvider: DeveloperTokenProvider ) = withContext(Dispatchers.IO) { val bufferSize = 1024 * 1024 val audioFile = FileInputStream(filePath) val byteBuffer = ByteBuffer.allocate(bufferSize) byteBuffer.order(ByteOrder.LITTLE_ENDIAN) var bytesRead: Int while (audioFile.read(byteBuffer.array()).also { bytesRead = it } != -1) { val signatureGenerator = (ShazamKit.createSignatureGenerator(AudioSampleRateInHz.SAMPLE_RATE_44100) as ShazamKitResult.Success).data signatureGenerator.append(byteBuffer.array(), bytesRead, System.currentTimeMillis()) val signature = signatureGenerator.generateSignature() println("Signature: ${signature.durationInMs}") val catalog = ShazamKit.createShazamCatalog(developerTokenProvider, Locale.ENGLISH) val session = (ShazamKit.createSession(catalog) as ShazamKitResult.Success).data val matchResult = session.match(signature) println("MatchResult : $matchResult") setMatchResult(matchResult) byteBuffer.clear() } audioFile.close() } I noticed that changing Locale in catalog creation results in different result as i get NoMatch without exception. Can you please help me with this?