our company created a web safari extension. before iOS 26 (beta) release we would archive our extension and install to our devices no problem. since iOS 26 (beta) (we also tried in beta 4 23A5297m) the extension would archive perfectly but when installing the extension would just not run. its found in settings under safari extension, but when enabled the extension and open safari it will show error message "Ext" is no longer available. to rule out all code issues, we built a new project from scratch with a new bundle id, tried to archive with no problem, but when installed in an iphone 16 with iOS 26 BETA (23A5297m) same error ocurs it installs but when opening safari it will give an error message saying extension is no longer available. attached in the google drive link is a zip file of the new project, a zip file with a succesfull build of the ipa file with enterprise distribute, a video of the entire proccess and the error that the iphone gives. also attached a log file from the iphone that includes the install and the crash of the app. within the logs there is a log saying Error occurred during transaction: The provided identifier "dev.sacal.ext" is invalid. before ios 26 the exact steps worked perfectly. https://drive.google.com/file/d/1PYDOv8IRvRY_ouqiOc0sJdcfh0CHbL72/view?usp=sharing

I'm testing web extension to safari on iOS. I've built and added extension application to simulator, but on safari settings shows no extensions. I'm using Xcode 16.3 beta 2 with Simulator iOS 18.4 (22E5216h), tested on iPhone 16. https://app.screencast.com/oUq4EMonmfT7u https://app.screencast.com/MCquvHzmZi8QS

(1) Context: Our project has a login feature via WEBVIEW (using SFSafariViewController) and integrates PassKey on the Web side. The app listens for a successful login by capturing the redirect URL via the delegate of SFSafariViewController. (2) Issue: On iOS < 18.4: The redirect URL is captured with full parameters returned. https://xyz.com/home?session_state=...&code=... On iOS ≥ 18.4: The redirect URL is captured successfully but missing parameters. https://xyz.com/home We currently suspect that the issue originates from the SFSafariViewController framework after the release of iOS 18.4. Has anyone experienced a similar issue? We would also appreciate support from the Apple team.

Hi there! I'm new to App Development and I'm running into the following error when playing audio on a website loaded through a WKWebView: 0x112000cc0 - ProcessAssertion::acquireSync Failed to acquire RBS assertion 'WebKit Media Playback' for process with PID=70.197, error: Error Domain=RBSServiceErrorDomain Code=1 "(originator doesn't have entitlement com.apple.runningboard.assertions.webkit AND originator doesn't have entitlement com.apple.multitasking.systemappassertions)" UserInfo={NSLocalizedFailureReason=(originator doesn't have entitlement com.apple.runningboard.assertions.webkit AND originator doesn't have entitlement com.apple.multitasking.systemappassertions)} Looking through this forum, it seems more people have this issue, yet no one has found a solution (or posted it...). The solutions that I did find (Background Modes capability, webView.configuration.allowsInlineMediaPlayback = true), did nothing. To make sure the issue had nothing to do with my own code, I created an empty project to reproduce the issue. I'm not sure on the best way to share it, but it's a small file (forgive me, I have no clue what it does, actually chatGPT made it for me. My real application is a WebApp wrapped with Capacitor, so it handles all the Swift stuff) import SwiftUI import WebKit struct WebView: UIViewRepresentable { let urlString: String func makeUIView(context: Context) -> WKWebView { let webView = WKWebView() webView.configuration.allowsInlineMediaPlayback = true webView.configuration.allowsAirPlayForMediaPlayback = true webView.navigationDelegate = context.coordinator return webView } func updateUIView(_ uiView: WKWebView, context: Context) { if let url = URL(string: urlString) { let request = URLRequest(url: url) uiView.load(request) } } func makeCoordinator() -> Coordinator { Coordinator(self) } class Coordinator: NSObject, WKNavigationDelegate { var parent: WebView init(_ parent: WebView) { self.parent = parent } func webView(_ webView: WKWebView, didFailProvisionalNavigation navigation: WKNavigation!, withError error: Error) { print("Web page loading failed: \(error.localizedDescription)") } } } struct WebViewDemo: View { var body: some View { NavigationView { WebView(urlString: "https://www.w3schools.com/html/tryit.asp?filename=tryhtml5_audio_all") .navigationBarTitle("Web View") } } } struct WebView_Previews: PreviewProvider { static var previews: some View { WebViewDemo() } } Nothing special, right? When I build the app and navigate to a website that has an tag (https://www.w3schools.com/html/tryit.asp?filename=tryhtml5_audio_all). I still see the error when I play the audio. It plays nonetheless, but the error is there. I'm not at all interested in actually playing audio in the background/when the app is closed/suspended. I just want the error to go away! I've tried different iOS versions (14,15,16,17), but the problem persists. Anyone know what's happening?

Running a web server on localhost is breaking on the iOS Simulator. It is also blocking me from testing my mobile application. Full Log: Full Log

We are experiencing an issue with Safari in all versions from 18.0 to 18.5 that does not occur in version 17. It affects both iPhones and Macs. And does not happen in Chrome or Windows. The problem is impacting our customers, and our monitoring tools show a dramatic increase in error volume as more users buy/upgrade to iOS 18. The issue relates to network connectivity that is lost randomly. I can reliably reproduce the issue online in production, as well as on my local development environment. For example our website backoffice has a ping, that has a frequency of X seconds, or when user is doing actions like add to a cart increasing the quantity that requires backend validation with some specific frequency the issue is noticable... To test this I ran a JS code to simulate a ping with a timer that calls a local-dev API (a probe that waits 2s to simulate "work") and delay the next HTTP requests with a dynamic value to simulate network conditions: Note: To even make the issue more clear, I'm using GET with application/json payload to make the request not simple, and require a Pre-flight request, which doubles the issue. (async () => { for (let i = 0; i < 30; i++) { try { console.log(`Request start ${i} ${new Date().toLocaleString()}`); const res = await fetch(`https://api.redated.com:8090/1/*****/probe?`, { method: 'GET', mode: "cors", //headers: {'Content-Type': 'text/plain'}, headers: { 'Content-Type': 'application/json' }, }); console.log(`Request end ${i} ${new Date().toLocaleString()} status:`, res.status); } catch (err) { console.error(`Request ${i} ${new Date().toLocaleString()} error:`, err); } let delta = Math.floor(Math.random() * 10); console.log("wait delta",delta); await new Promise(r => setTimeout(r, 1000 - delta)); } })(); For simplicity lets see a case where it fails 1 time only out of 10 requests. (Adjusting the "delta" var on the time interval create more or less errors...) This are the results: The network connection was lost error, which is false, since this is on my localhost machine, but this happens many times and is very reproducible in local and production online. The dev-tools and network tab shows empty for status error, ip, connection_id etc.. its like the request is being terminated very soon. Later I did a detailed debugging with safari and wireshark to really nail down the network flow of the problem: I will explain what this means: Frame 10824 – 18:52:03.939197: new connection initiated (SYN, ACK, ECE). Frame 10831 – 18:52:04.061531: Client sends payload (preflight request) to the server. Frame 10959 – 18:52:09.207686: Server responds with data to (preflight response) to the client. Frame 10960 – 18:52:09.207856: Client acknowledges (ACK) receipt of the preflight response. Frame 10961 – 18:52:09.212188: Client sends the actual request payload after preflight OK and then server replies with ACK. Frame 11092 – 18:52:14.332951: Server sends the final payload (main request response) to the client. Frame 11093 – 18:52:14.333093: captures the client acknowledging the final server response, which marks the successful completion of the main request. Frame 11146 – 18:52:15.348433: [IMPORTANT] the client attempts to send another new request just one second later, which is extremely close to the keep-alive timeout of 1 second. The last message from the server was at 18:52:14.332951, meaning the connection’s keep-alive timeout is predicted to end around 18:52:15.332951 but it does not. The new request is sent at 18:52:15.348433, just microseconds after the predicted timeout. The request leaves before the client browser knows the connection is closed, but by the time it arrives at the server, the connection is already dead. Frame 11147 – 18:52:15.356910: Shows the server finally sending the FIN,ACK to indicate the connection is closed. This happens slightly later than the predicted time, at microsecond 356910 compared to the expected 332951. The FIN,ACK corresponds to sequence 1193 from the ACK of the last data packet in frame 11093. Conclusions: The root cause is related to network handling issues, when the server runs in a setting of keep-alive behavior and keep-alive timeout (in this case 1s) and network timming issue with Safari reusing a closed connection without retrying. In this situation the browser should retry the request, which is what other browsers do and what Safari did before version 18, since it did not suffer from this issue. This behaviour must differ from previous Safari versions (however i read all the public change logs and could not related the regression change). Also is more pronounced with HTTP/1.1 connections due to how the keep-alive is handled. When the server is configured with a short keep-alive timeout of 1 second, and requests are sent at roughly one-second intervals, such as API pings at fixed intervals or user actions like incrementing a cart quantity that trigger backend calls where the probability of failure is high. This effect is even more apparent when the request uses a preflight with POST because it doubles the chance, although GET requests are also affected. This was a just a test case, but in real production our monitoring tools started to detect a big increment with this network error at scale, many requests per day... which is very disrupting, because user actions are randomly being dropped when the user actions and timming happens to be just near a previous connection, where keep alive timeout kicks-in, but because the browser is not yet notified it re-uses the same connection, but by the time it arrived the server is a dead connection. The safari just does nothing about it, does not even retry, be it a pre-flight or not, it just gives this error. Other browsers don't have this issue. Thanks!

I don't know why but all of a sudden when I build the extension it just doesn't load in Safari. The build executes fine but the extension doesn't load. Sometimes, through trying different combinations of clearing the build folder, building, archiving, ... it suddenly loads. And the next time I build again it doesn't load properly. So I can't do any work on it or test anything. I don't know why all of a sudden I am getting this behavior. It looks like engineers at Apple are constantly trying to overcomplicate a process that is at least ten times simpler in any other browser. This is ridiculous. Is this what our annual fee goes to? And they don't even provide any support for that. Several times I've tried to get some help here just to have to spend hours upon hours to figure it out by myself. I'm so tired of this.

Hi, I had been working on an extension without any issues, running it from Xcode and debugging locally in Safari. However, without making any code changes, and after uninstalling the extension, it stopped appearing in Safari after building for local debugging. Does anyone know what might be happening or how I can clean up the system? Thanks a lot and best regards.

If the Safari Technology Preview window is located on an external monitor with DisplayLink and the computer goes to sleep (screen saver), when it returns, it closes with an error. If the window is located on another monitor that is connected by USB, it does not close. Equipo: Macbook Pro M4 Pro SO: MacOS Sequoia 15.6.1 Safari Technology Preview: Release 227 (preview version work fine) DisplayLink Manager: 13.0.1 (build 46)

Hi, I am developing the Click & Read web add-on for Chromium, Firefox and Safari. We use xcrun safari-web-extension-converter tool to generate the Safari add-on. The build on Xcode had no meaning errors/warnings, until we had to switch to a more up-to-date MacBook (required as deprecated Mac had no support for latest macOS and thus for Xcode compatibility !). So now I build my add-on on an Apple M1 MB Air on Sequoia 15.0 with latest Xcode, but I encounter an error ? or warning ? : NSBundle file:///System/Library/PrivateFrameworks/MetalTools.framework/ principal class is nil because all fallbacks have failed Unable to create bundle at URL ((null)): normalized URL null Unable to create bundle at URL ((null)): normalized URL null Unable to create bundle at URL ((null)): normalized URL null But it doesn't prevent the add-on build to complete as I am able to open it onto Safari. Then, when loading the add-on on a test web page, I get this error on safari console: Error: Invalid call to runtime.connect(). No runtime.onConnect listeners found. BTW, the same add-on Dist works as expected on Chrome or Firefox (on macOS). So it seems the runtime listener runtime.onConnect.addListener isn't initiated on Background script... Thanks for your feedback and help

Hello everyone, I'm working on an app that uses WKWebView. My app uses a custom menu and we disable the default menu by overriding with: WKWebAction.canPerformAction() However, with the new iOS 18.2 release, I am no longer able to override the "Copy Link with Highlight" option that pops up when highlighting a selection as can be seen from the screenshot: Has anyone found a work around/bypass for this? Environment iOS Version: iOS 18.2 Device: iPhone 13 Pro App platform: iOS Xcode version: 16.1 MacOS: 14.5

The extension popups don't seem to support the dark mode media query. The only way the query gets detected is when a color-scheme is added: <meta name="color-scheme"content="light dark">

Hello - we have a Mac application that uses a browser extension and the web extension JS APIs to communicate with Safari. During user testing we found that the tab title and tab URL properties are empty when obtaining the set of open windows via windows.get() after a Safari restart. We are testing with Safari 18.4 (20621.1.15.11.10). We have made a TestFlight version of our app and extension available to help with testing: https://testflight.apple.com/join/Va8Zdv9d. Screenshot and screen recording are attached to the Feedback ID supplied below. STEPS TO REPRODUCE Install Tabby via the TestFlight link Enable the Tabby for Safari extension in the Safari extensions dialog Grant permissions for Tabby for Safari to all windows all the time Within Safari, open two windows each with at least two tabs Within the Tabby app, ensure you see the windows and tabs listed correctly (tab title displayed for each) Quit and restart Safari Expected behavior Safari re-opens existing windows and Tabby displays title for each tab Observed Safari re-opens existing windows but within Tabby all tabs except the current tab are displayed with a title of “Start Page”. Under the hood the tab title and tab URL properties are empty when returned via a windows.get() call after Safari restarts. NAME AND APPLE ID OF APP Tabby - Browser Tab Manager 1586203406 FEEDBACK ASSISTANT ID FB16389506

Hi everyone, I’m encountering a serious reliability issue with message passing in my Safari extension on iOS 18.4.1 and iOS 18.5 In my extension, I use the standard messaging API where the background script sends a message to the content scrip. The content script is listening using: browser.runtime.onMessage.addListener(handler); This setup has been working reliably in previous versions of iOS, but since updating to iOS 18.4.1 and iOS 18.5, I’ve noticed that messages sent from the background script are not consistently received by the content script. From my logs, I can confirm that: The background script is sending the message. The content script’s listener is not always triggered. There are no errors or exceptions logged in either script. It seems as if browser.runtime.onMessage.addListener is either not getting registered in time or failing silently in some instances. This issue is intermittent and does not occur all the time. Has anyone else experienced similar issues in iOS 18.4.1 and 18.5? Are there any known changes or workarounds for ensuring reliable communication between background and content scripts in this version? Any help or insights would be greatly appreciated. Thanks!

Is the new Observations API for WebPage not available in Beta 1 as demoed in the WWDC video? I get this error even though Observation is imported.

hi Testing on OS26 Public Beta 6. In Safari, if you enter x homepage and scroll, the tab bar sticks to the bottom and moves. Make the keyboard appear in the search window When scrolling down on the Safari homepage again, the issue of not being able to stick to the bottom appears. Is it because the liquid glass UI was applied this time? and safari bug? Please let me know if I'm missing anything

Hello, I am developing a Mac application via Mac Catalyst and encountering an issue with WKWebView. Specifically, I'm loading a webpage (e.g., https://translate.google.com) in WKWebView, but when I press the copy button on the page, the content doesn't actually copy to the clipboard. I've attempted modifying the UserAgent without any success. Here is the relevant part of my code: override func viewDidLoad() { super.viewDidLoad() let config = WKWebViewConfiguration() config.preferences = WKPreferences() config.defaultWebpagePreferences.preferredContentMode = .desktop let webView = WKWebView(frame: .zero, configuration: config) webView.translatesAutoresizingMaskIntoConstraints = false view.addSubview(webView) webView.scrollView.showsVerticalScrollIndicator = false webView.backgroundColor = UIColor.white webView.scrollView.backgroundColor = UIColor.white webView.leadingAnchor.constraint(equalTo: view.leadingAnchor).isActive = true webView.topAnchor.constraint(equalTo: view.topAnchor).isActive = true webView.trailingAnchor.constraint(equalTo: view.trailingAnchor).isActive = true webView.bottomAnchor.constraint(equalTo: view.bottomAnchor).isActive = true if let url = URL(string: "https://translate.google.com") { let req = URLRequest(url: url) webView.load(req) } }

Safari 26 close and Refresh buttons not working in Compact tab layout

Hi! I configure proxy for webview like DispatchQueue.main.async { self.webView.configuration.websiteDataStore.proxyConfigurations = [proxyConfiguration] } It is fine in iosiOS 17 however, it crashes in iOS 18.3. And the problem seems to be related to the left side of the equation. I tried to call print(self.webView.configuration.websiteDataStore.proxyConfigurations.count) in async block and got the same bad access error. But if stop at that line of code and call po self.webView.configuration.websiteDataStore.proxyConfigurations in debugger it returns 0 elements. Did anyone have the same problem? What may cause the exception?

Hello, I'm currently facing some issues with localization for the Safari extension on iOS: Issues with Language Tags: Folder names like pt-BR (Brazilian Portuguese) and pt-PT (European Portuguese) placed in the Resources/_locales/ directory are not displaying the respective languages correctly; instead, the default English is shown. Similarly, using folder names like zh-CN (Simplified Chinese) and zh-TW (Traditional Chinese) also results in default English display instead of the intended Chinese language. Conversely, when changing the folder names to pt (Portuguese general) and zh (Chinese general), the languages display correctly. Could you please provide any recommendations or tips regarding language tag settings and how to ensure they are properly recognized according to RFC 5646? Thanks for your help! Best,