Notifications

RSS for tag

Learn about the technical aspects of notification delivery on device, including notification types, priorities, and notification center management.

Notifications Documentation

Posts under Notifications subtopic

Post

Replies

Boosts

Views

Activity

Notification Service Extension is killed during startup
We are observing an issue where the iOS Notification Service Extension (NSE) is terminated by the system during startup, before either didReceive(_:withContentHandler:) or serviceExtensionTimeWillExpire(_:) is invoked. When this occurs, the notification is delivered without modification (for example, an encrypted payload is shown to the user). System logs frequently contain the message “Extension will be killed because it used its runtime in starting up”. During testing, we observed that CPU-intensive operations or heavy initialization performed early in the extension lifecycle — especially inside init() or directly on the main thread in didReceive often cause the system to kill the NSE almost immediately. These terminations happen significantly earlier than the commonly observed ~30-second execution window where the OS normally invokes serviceExtensionTimeWillExpire(_:) before ending the extension. When these early terminations occur, there is no call to the expiry handler, and the process appears to be forcefully shut down. Moving the same operations to a background thread changes the behavior: the extension eventually expires around the usual 30-second window, after which the OS calls serviceExtensionTimeWillExpire(_:). We also observed that memory usage plays a role in early termination. During tests involving large memory allocations, the system consistently killed the extension once memory consumption exceeded a certain threshold (in our measurements, this occurred around 150–180 MB). Again, unlike normal time-based expiration, the system did not call the expiry handler and no crash report was produced. Since Apple’s documentation does not specify concrete CPU, memory, or startup-cost constraints for Notification Service Extensions or any other extensions beyond the general execution limit, we are seeking clarification and best-practice guidance on expected behaviors, particularly around initialization cost and the differences between startup termination. NSE Setup: class NotificationService: UNNotificationServiceExtension { static var notificationContentHandler: ((UNNotificationContent) -> Void)? static var notificationContent: UNMutableNotificationContent? static var shoudLoop = true override func didReceive(_ request: UNNotificationRequest, withContentHandler contentHandler: @escaping (UNNotificationContent) -> Void) { NotificationService.notificationContentHandler = contentHandler NotificationService.notificationContent = request.content.mutableCopy() as? UNMutableNotificationContent NotificationService.notificationContent!.title = "Weekly meeting" NotificationService.notificationContent!.body = "Updated inside didReceive" // Failing scenarios } override func serviceExtensionTimeWillExpire() { NotificationService.shoudLoop = false guard let handler = NotificationService.notificationContentHandler, let content = NotificationService.notificationContent else { return } content.body = "Updated inside serviceExtensionTimeWillExpire()" handler(content) } }
2
0
224
Nov ’25
Got com.apple.developer.usernotifications.filtering entitlement still not able to suppress notifications
I got notification filtering permission from appStoreConnect, i.e. com.apple.developer.usernotifications.filtering, but not able to suppress notification even after setted contentHandler(UNNotificationContent()) and contentHandler(UNMutableNotificationContent()). Added entitlements in both extension and main app, also in signing profile these Entitlements are visible, what other changes should I do?
1
0
121
Nov ’25
How to Enable com.apple.developer.pushkit.unrestricted-voip Entitlement for Production App?
We are developing a walkie-talkie style iOS app using CallKit and PushKit for real-time voice communication. The app is intended for internal company use and requires unrestricted VoIP push capabilities to reliably deliver incoming call alerts, even in background or locked states. Our app's use case follows Apple’s guidelines, and we are not using PushKit for messaging or background data. We have already enabled "Push Notifications" in Capabilities and confirmed the provisioning profile, but are unable to enable com.apple.developer.pushkit.unrestricted-voip. Could someone from Apple or the community advise on the current process to request this entitlement for a production app? Developer Team ID: 3KX7Q4LX88 App Bundle ID: com.ksc-sys.rcc.TakumiTalk Developer Name: KOHEI TAKAOKA Company: R C C, Y.K
2
0
146
Jun ’25
Clarification on Timing for Critical Alerts Approval in iOS
We are currently planning the development of an iOS healthcare application that will require the use of Critical Alerts. I understand that these notifications bypass Do Not Disturb and Silent mode, and therefore require special entitlement from Apple. We understand that Critical Alerts require a special entitlement from Apple. Could you please clarify: Do we need to request and obtain Apple’s approval for Critical Alerts before we begin development of the app? Or can we apply for this entitlement after we have a working build or prototype ready? We want to ensure compliance and streamline our development process, so any guidance on the appropriate timing for the entitlement request would be greatly appreciated.
1
0
110
Jul ’25
Push notification sent to uninstalled app
I am using push notification in my app. User token gets properly registered and is sent to server. Notification are also sent by server and recieved on device as expected. The problem occurs when user uninstalls the app. iOS does not provide any option to handle uninstall event. On top of that when server send notification to such device token APNS feedback service sends success message. Meaning APNS sends push notifications to uninstalled app.I have an API to unregister the device on server since no event is triggered I am unable to call it.Please suggest a way out.
4
0
9.2k
Nov ’25
Device token not being extracted - iOS app registered for push notifications but callback methods not called
Background: The project was created in Xcode 5, then recreated in new Xcode. Before migration, push notifications worked without issues, after migration device token stopped being extracted. Problem: iOS app registers for push notifications, but didRegisterForRemoteNotificationsWithDeviceToken or didFailToRegisterForRemoteNotificationsWithError methods are not being called. Current situation: App is registered for push notifications (isRegisteredForRemoteNotifications = true) Notification permissions are granted Entitlements are configured correctly (aps-environment: development) Bundle ID: com.autoserviceonline.app Team: BUSINESSVISION COMPANY, TOO (NS3FSG45V7) But callback methods are not being called What I've already tried: Deleted and recreated all App IDs in Apple Developer Portal Cleared Xcode cache and derived data Created new APNs certificates and provisioning profiles Removed "ghost" certificate from Keychain Access Problem persists Additional information: Also noticed that Push Notifications Console opens non-existent project "BV.TestSwiftData" with Personal Team instead of current corporate App ID com.autoserviceonline.app. These issues might be related to project migration from old Xcode. Request: Why iOS doesn't call callback methods for device token, although registration was successful?
1
0
95
Jul ’25
Need Clarification on Using Location Push Service Extension for Firefighter Check-In/Check-Out
I’m building a firefighter app that needs to automatically check in a firefighter when they arrive at the station and check them out when they leave — even if the app is killed. We need reliable enter/exit detection, low latency, and only one fixed location per user. We’re evaluating Region Monitoring, which works in the killed state but may introduce delays and inconsistent accuracy. To ensure mission-critical reliability, we are considering the Location Push Service Extension, since it can fetch precise location on demand and wake the extension even when the app is terminated. Before requesting the restricted entitlement, we need clarification on Apple’s expectations: Is Region Monitoring recommended for this fixed-location use case? Would Apple consider approving the Location Push Service Extension for a public-safety workflow? What prerequisites do we need before submitting the entitlement request (Always permission, prototype, privacy disclosures, etc.)? What details should be included in the justification form? Our goal is to follow the most reliable and Apple-approved approach for firefighter check-in/out. Any guidance would be greatly appreciated.
0
0
131
Nov ’25
iPhone push notifications stop: DeviceTokenNotForTopic
We are facing an issue: push notifications are not being received. We are using the Marketing Cloud SDK for push notifications. On install, the app correctly registers for push notifications. We pass the required information to Marketing Cloud — for example, contact key, token, etc. Marketing Cloud also confirms that the configuration is set up, and we have tried sending push notifications with proper delivery settings. The issue is that after some time, the device gets automatically opted out in the Marketing Cloud portal. When we consulted their team, they said this is caused by the “DeviceTokenNotForTopic” error received from APNs. I have verified the certificates and bundle ID from my end — everything looks correct. Device: iPhone 15, iPhone 17 iOS: 18.7.2, 26.1
1
0
187
Dec ’25
Case-ID: 14080335 Push notification requests to iOS devices using APNs (HTTP/2) time out
We are currently developing a WebAPI service that uses APNs (HTTP/2) to send push notifications to iOS devices. (Using PushSharp's HTTP/2 support) The WebAPI service is running on IIS using .net framework 4.8 and c#. The connection to APNs is always maintained, and the connection is checked every 30 minutes using a dummy token Ping. KeepAlivePeriod = 30 minutes and KeepAliveRetryPeriod = 10 seconds have also been set. However, the following issues are occurring. Although the Ping sent immediately before was successful, a TimeoutException occurs in the notification request sent a few minutes later. There is no explicit disconnection notification from APNs, and the connection appears to be silently disconnected. Once a TimeoutException occurs, it occurs frequently afterwards. Below is an excerpt from the log. Apple Notification Failed for some unknown reason 1-1: One or more errors occurred. Apple Notification Failed for some unknown reason 1-2:System.TimeoutException: The operation timed out. In light of this issue, I would like to be advised on the following two points. Are there any official specifications regarding the lifecycle and expiration date of APNs HTTP/2 connections? Even if pings are sent periodically, is there a timeout or other setting that disables the connection on the APNs side? What are the conditions that would cause APNs to silently terminate a connection? For example, could this be due to inactivity, TLS restrictions, network maintenance, etc.? If you have any official documentation or technical guidelines to improve the reliability of this system, we would appreciate it if you could share them with us. Thank you in advance.
3
0
289
May ’25
LiveCommunicationKit
We are implementing a camera intercom calling feature using VoIP Push notifications (PushKit) and LiveCommunicationKit (iOS 17.4+). The app works correctly when running in foreground or background, but fails when the app is completely terminated (killed by user or system). After accepting the call from the system call UI, the app launches but gets stuck on the launch screen and cannot navigate to our custom intercom interface. Environment iOS Version: iOS 17.4+ (testing on latest iOS versions) Xcode Version: Latest version Device: iPhone (tested on multiple devices) Programming Languages: Objective-C + Swift (mixed project) Frameworks Used: PushKit, LiveCommunicationKit (iOS 17.4+) App State When Issue Occurs: Completely terminated/killed Problem Description Expected vs Actual Behavior App State Behavior Foreground ✅ VoIP push → System call UI → User accepts → Navigate to intercom → Works Background ✅ VoIP push → System call UI → User accepts → Navigate to intercom → Works Terminated ❌ VoIP push → System call UI → User accepts → App launches but stuck on splash screen → Cannot navigate Root Issues When app is terminated and user accepts the call: Data Loss: pendingNotificationData stored in memory is lost when app is killed and relaunched Timing Issue: conversationManager(_:perform:) delegate method is called before homeViewController is initialized Lifecycle Confusion: App initialization sequence when launched from terminated state via VoIP push is unclear Code Flow VoIP Push Received (app terminated): func pushRegistry(_ registry: PKPushRegistry, didReceiveIncomingPushWith payload: PKPushPayload, for type: PKPushType, completion: @escaping () -> Void) { let notificationDict = NotificationDataDecode.dataDecode(payloadDict) as? [AnyHashable: Any] let isAppActive = UIApplication.shared.applicationState == .active // Store in memory (PROBLEM: lost when app is killed) pendingNotificationData = isAppActive ? nil : notificationDict if !isAppActive { // Report to LCK try await conversationManager.reportNewIncomingConversation(uuid: uuid, update: update) } completion() } User Accepts Call: func conversationManager(_ manager: ConversationManager, perform action: ConversationAction) { if let joinAction = action as? JoinConversationAction { // PROBLEM: pendingNotificationData is nil (lost) // PROBLEM: homeViewController might not be initialized yet if let pendingData = pendingNotificationData { ModelManager.share().homeViewController.gotoCallNotificationView(pendingData) } joinAction.fulfill(dateConnected: Date()) } } Note: When user taps "Accept" on system UI, LiveCommunicationKit calls conversationManager(_:perform:) delegate method, NOT a manual acceptCall method. Questions for Apple Support App Lifecycle: When VoIP push is received and app is terminated, what is the exact lifecycle? Does app launch in background first, then transition to foreground when user accepts? What is the timing of application:didFinishLaunchingWithOptions: vs pushRegistry:didReceiveIncomingPushWith: vs conversationManager(_:perform:)? State Persistence: What is the recommended way to persist VoIP push data when app is terminated? Should we use UserDefaults, NSKeyedArchiver, or another mechanism? Is there a recommended pattern for this scenario? Initialization Timing: When conversationManager(_:perform:) is called with JoinConversationAction after app launch from terminated state, what is the timing relative to app initialization? Is homeViewController guaranteed to be ready, or should we implement a waiting/retry mechanism? Navigation Pattern: What is the recommended way to navigate to a specific view controller when app is launched from terminated state? Should we: Handle it in application:didFinishLaunchingWithOptions: with launch options? Handle it in conversationManager(_:perform:) delegate method? Use a notification/observer pattern to wait for initialization? Completion Handler: In pushRegistry:didReceiveIncomingPushWith, we call completion() immediately after starting async reportNewIncomingConversation task. Is this correct, or should we wait for the task to complete when app is terminated? Best Practices: Is there a recommended pattern or sample code for integrating LiveCommunicationKit with VoIP push when app is terminated? What are the best practices for handling app state persistence and navigation in this scenario? Attempted Solutions Storing pendingNotificationData in memory → Failed: Data lost when app is killed Checking UIApplication.shared.applicationState → Failed: Doesn't reflect true state during launch Calling gotoCallNotificationView in conversationManager(_:perform:) → Failed: homeViewController not ready Additional Information Singleton pattern: LCKCallManagerSwift, ModelManager homeViewController accessed via ModelManager.share().homeViewController Mixed Objective-C and Swift architecture conversationManager(_:perform:) is called synchronously and must call joinAction.fulfill() or joinAction.fail() Requested Help We need guidance on: Correct app lifecycle handling when VoIP push is received in terminated state How to persist VoIP push data across app launches How to ensure app initialization is complete before navigating Best practices for integrating LiveCommunicationKit with VoIP push when app is terminated Thank you for your assistance!
0
0
125
Nov ’25
Questions about using the "UserNotification framework"
In macOS, how can I use UnmutableNotificationContent notifications to prevent the main window from activating when clicking the notification? code: import Cocoa import UserNotifications // Mandatory import for notification functionality class ViewController: NSViewController { override func viewDidLoad() { super.viewDidLoad() // Automatically request permissions and send a test notification when the view loads sendLocalNotification() } /// Core method to send a local notification func sendLocalNotification() { let notificationCenter = UNUserNotificationCenter.current() // 1. Request notification permissions (Mandatory step; user approval required) notificationCenter.requestAuthorization(options: [.alert, .sound, .badge]) { [weak self] isGranted, error in guard let self = self else { return } // Handle permission request errors if let error = error { print("Permission request failed: \(error.localizedDescription)") return } // Exit if user denies permission if !isGranted { print("User denied notification permissions; cannot send notifications") return } // 2. Construct notification content using UNMutableNotificationContent let notificationContent = UNMutableNotificationContent() notificationContent.title = "Swift Notification Test" // Notification title notificationContent.subtitle = "macOS Local Notification" // Optional subtitle notificationContent.body = "This is a notification created with UNMutableNotificationContent" // Main content notificationContent.sound = .default // Optional notification sound (set to nil for no sound) notificationContent.badge = 1 // Optional app icon badge (set to nil for no badge) // 3. Set trigger condition (here: "trigger after 3 seconds"; can also use time/calendar triggers) let notificationTrigger = UNTimeIntervalNotificationTrigger( timeInterval: 3, // Delay in seconds repeats: false // Whether to repeat (false = one-time only) ) // 4. Create a notification request (requires a unique ID for later cancellation if needed) let notificationRequest = UNNotificationRequest( identifier: "SwiftMacNotification_001", // Unique identifier content: notificationContent, trigger: notificationTrigger ) // 5. Add the request to the notification center and wait for triggering notificationCenter.add(notificationRequest) { error in if let error = error { print("Notification delivery failed: \(error.localizedDescription)") } else { print("Notification added to queue; will trigger in 3 seconds") } } } } }
0
0
143
Dec ’25
Problem receiving Remote Notification in the background after Review Rejected
I created an app. One if its functionalities is receive Remote Notification in the background, while app is monitoring Significant Location Changes (SLC). This functionality worked fine. I was receiving these notifications correctly. Sometimes instantly, sometime with small or large delay. And then I send the app for review. It was rejected with 3 remarks: The app or metadata includes information about third-party platforms that may not be relevant for App Store users, who are focused on experiences offered by the app itself (I wrote that app communication works both for iOS and Android.) The app declares support for audio in the UIBackgroundModes key in your Info.plist but we are unable to locate any features that require persistent audio. EULA (End User License Agreement) is missing for in-app purchases. After the rejection the app is no longer receiving these notifications. They are there, since the app receives them, when I open app, or significant location change is detected. It also works, when I run the app directly from Xcode (in debug mode), not from TestFlight nor in Sandbox. It seem to me like Apple somehow spoiled my background capabilities on purpose or accidentally. Is it possible? What can I do with it? Is it the case that I should just fix the review remarks and send the app back to review, and once the app passes it, it will work again? Or should I not count on it? Any suggestions? I asked Apple using: https://developer.apple.com/contact/topic/#!/topic/select but so far no response.
2
0
186
Aug ’25
RESCIND_CONSENT notification not delivered in Sandbox environment
I am currently testing the Declared Age Range / Parental Consent flow in the Sandbox environment, and I am experiencing an issue where the RESCIND_CONSENT App Store Server Notification is not being delivered to my server. 🔍 Test Environment iOS version: iOS 26.2 (Sandbox environment) App Store Server Notifications: Sandbox environment 🔄 Test Scenario App Settings > Developer > Sign in with a Sandbox account Launch the app In App Settings > Developer > Sandbox Account > Management > Revoke App Consent, enter the app’s Bundle ID, tap the Revoke Consent button, and confirm that the revocation completion popup message is displayed Check whether App Store Server Notifications are received by the server Confirm that the RESCIND_CONSENT notification is not received by the server ✅ Expected Result The App Store Server sends a RESCIND_CONSENT notification to the Sandbox endpoint The notification payload includes appTransactionId The server can block app access based on the corresponding appTransactionId ❌ Actual Result No RESCIND_CONSENT notification is received in the Sandbox environment ❓ Questions Is this behavior an intended limitation of the Sandbox environment, or is it a known issue or bug? Is it possible that RESCIND_CONSENT notifications will only be delivered starting January 1, 2026? Additionally, when a RESCIND_CONSENT server notification is received, I currently update my database with the appTransactionId and the registration date. When a minor attempts to access the app, I check the latest appTransactionId status, and if the most recent state indicates consent has been revoked, I block app access and prompt the user to request parental consent again using PermissionKit.
1
0
206
Dec ’25
Game Center and Push Notifications
I have used the Push Notifications Console and verify that the test notification reaches my device (it says "not necessarily the app"). However, GameCenter notifications are not reaching the app. When one device passes the turn, the turn is successfully passed as seen in the Matchmaker VC. However, the app does not get the turn pass notification whether or not it is running. No banner appears if the app is not running (but it does when using the Push Notifications Console). Please advise.
1
0
174
Jan ’26
APNS always returning "discarded as device was offline"
Approx Dec 13th 2025 til now (Dec 29th) I noticed my APNS dropped off to nothing daily. When I try to send APNS alerts on the developer site tool it always returns "discarded as device was offline" for multiple devices which I know are online. When I try pushing through my VPS (as I always have without any code changes for months) I get status codes of 400 and 403 mostly and a few 200's without it delivering also. I created a new sandbox certificate just in case it was that but still no luck, I get the same results. Ive checked for any firewall issues and I see the following on my VPS: nslookup gateway.push.apple.com Server: 1.1.1.1 Address: 1.1.1.1#53 ** server can't find gateway.push.apple.com: NXDOMAIN This seems like a second issue but not the primary issue that the portal is reporting. Any ideas what to check? Im at a loss as to why its not working at all through apples test notification portal on my developer account. It seems thats the initial issue I need to solve. Thank you for any ideas/help
5
0
343
Feb ’26
Getting null data from App Store Server Notification
Hello Apple Support Team, We are using auto-renew plans in our app We have set the webhook URL in our App Store Connect account to get the Store server notification to get the auto renew data for an user The issue is when a user purchases any auto-renew plan at the auto-renew time, we are getting null data from the Apple side. We have printed the log's data to check what data are coming from the Apple webhook. we have attached our logs data please check it and let me know what can we do to resolve this
1
0
124
Jun ’25
How can notification action buttons' text be center aligned?
The iOS documentation shows notification actions buttons with the text center aligned: https://developer.apple.com/documentation/usernotifications/declaring-your-actionable-notification-types But there's no apparent way for an app to control this. The buttons are controlled and rendered by the system and the text is always left aligned. Is there some way to get the text center aligned?
1
0
94
Aug ’25
Notification Service Extension is killed during startup
We are observing an issue where the iOS Notification Service Extension (NSE) is terminated by the system during startup, before either didReceive(_:withContentHandler:) or serviceExtensionTimeWillExpire(_:) is invoked. When this occurs, the notification is delivered without modification (for example, an encrypted payload is shown to the user). System logs frequently contain the message “Extension will be killed because it used its runtime in starting up”. During testing, we observed that CPU-intensive operations or heavy initialization performed early in the extension lifecycle — especially inside init() or directly on the main thread in didReceive often cause the system to kill the NSE almost immediately. These terminations happen significantly earlier than the commonly observed ~30-second execution window where the OS normally invokes serviceExtensionTimeWillExpire(_:) before ending the extension. When these early terminations occur, there is no call to the expiry handler, and the process appears to be forcefully shut down. Moving the same operations to a background thread changes the behavior: the extension eventually expires around the usual 30-second window, after which the OS calls serviceExtensionTimeWillExpire(_:). We also observed that memory usage plays a role in early termination. During tests involving large memory allocations, the system consistently killed the extension once memory consumption exceeded a certain threshold (in our measurements, this occurred around 150–180 MB). Again, unlike normal time-based expiration, the system did not call the expiry handler and no crash report was produced. Since Apple’s documentation does not specify concrete CPU, memory, or startup-cost constraints for Notification Service Extensions or any other extensions beyond the general execution limit, we are seeking clarification and best-practice guidance on expected behaviors, particularly around initialization cost and the differences between startup termination. NSE Setup: class NotificationService: UNNotificationServiceExtension { static var notificationContentHandler: ((UNNotificationContent) -> Void)? static var notificationContent: UNMutableNotificationContent? static var shoudLoop = true override func didReceive(_ request: UNNotificationRequest, withContentHandler contentHandler: @escaping (UNNotificationContent) -> Void) { NotificationService.notificationContentHandler = contentHandler NotificationService.notificationContent = request.content.mutableCopy() as? UNMutableNotificationContent NotificationService.notificationContent!.title = "Weekly meeting" NotificationService.notificationContent!.body = "Updated inside didReceive" // Failing scenarios } override func serviceExtensionTimeWillExpire() { NotificationService.shoudLoop = false guard let handler = NotificationService.notificationContentHandler, let content = NotificationService.notificationContent else { return } content.body = "Updated inside serviceExtensionTimeWillExpire()" handler(content) } }
Replies
2
Boosts
0
Views
224
Activity
Nov ’25
Got com.apple.developer.usernotifications.filtering entitlement still not able to suppress notifications
I got notification filtering permission from appStoreConnect, i.e. com.apple.developer.usernotifications.filtering, but not able to suppress notification even after setted contentHandler(UNNotificationContent()) and contentHandler(UNMutableNotificationContent()). Added entitlements in both extension and main app, also in signing profile these Entitlements are visible, what other changes should I do?
Replies
1
Boosts
0
Views
121
Activity
Nov ’25
How to Enable com.apple.developer.pushkit.unrestricted-voip Entitlement for Production App?
We are developing a walkie-talkie style iOS app using CallKit and PushKit for real-time voice communication. The app is intended for internal company use and requires unrestricted VoIP push capabilities to reliably deliver incoming call alerts, even in background or locked states. Our app's use case follows Apple’s guidelines, and we are not using PushKit for messaging or background data. We have already enabled "Push Notifications" in Capabilities and confirmed the provisioning profile, but are unable to enable com.apple.developer.pushkit.unrestricted-voip. Could someone from Apple or the community advise on the current process to request this entitlement for a production app? Developer Team ID: 3KX7Q4LX88 App Bundle ID: com.ksc-sys.rcc.TakumiTalk Developer Name: KOHEI TAKAOKA Company: R C C, Y.K
Replies
2
Boosts
0
Views
146
Activity
Jun ’25
Clarification on Timing for Critical Alerts Approval in iOS
We are currently planning the development of an iOS healthcare application that will require the use of Critical Alerts. I understand that these notifications bypass Do Not Disturb and Silent mode, and therefore require special entitlement from Apple. We understand that Critical Alerts require a special entitlement from Apple. Could you please clarify: Do we need to request and obtain Apple’s approval for Critical Alerts before we begin development of the app? Or can we apply for this entitlement after we have a working build or prototype ready? We want to ensure compliance and streamline our development process, so any guidance on the appropriate timing for the entitlement request would be greatly appreciated.
Replies
1
Boosts
0
Views
110
Activity
Jul ’25
Push notification sent to uninstalled app
I am using push notification in my app. User token gets properly registered and is sent to server. Notification are also sent by server and recieved on device as expected. The problem occurs when user uninstalls the app. iOS does not provide any option to handle uninstall event. On top of that when server send notification to such device token APNS feedback service sends success message. Meaning APNS sends push notifications to uninstalled app.I have an API to unregister the device on server since no event is triggered I am unable to call it.Please suggest a way out.
Replies
4
Boosts
0
Views
9.2k
Activity
Nov ’25
Device token not being extracted - iOS app registered for push notifications but callback methods not called
Background: The project was created in Xcode 5, then recreated in new Xcode. Before migration, push notifications worked without issues, after migration device token stopped being extracted. Problem: iOS app registers for push notifications, but didRegisterForRemoteNotificationsWithDeviceToken or didFailToRegisterForRemoteNotificationsWithError methods are not being called. Current situation: App is registered for push notifications (isRegisteredForRemoteNotifications = true) Notification permissions are granted Entitlements are configured correctly (aps-environment: development) Bundle ID: com.autoserviceonline.app Team: BUSINESSVISION COMPANY, TOO (NS3FSG45V7) But callback methods are not being called What I've already tried: Deleted and recreated all App IDs in Apple Developer Portal Cleared Xcode cache and derived data Created new APNs certificates and provisioning profiles Removed "ghost" certificate from Keychain Access Problem persists Additional information: Also noticed that Push Notifications Console opens non-existent project "BV.TestSwiftData" with Personal Team instead of current corporate App ID com.autoserviceonline.app. These issues might be related to project migration from old Xcode. Request: Why iOS doesn't call callback methods for device token, although registration was successful?
Replies
1
Boosts
0
Views
95
Activity
Jul ’25
Need Clarification on Using Location Push Service Extension for Firefighter Check-In/Check-Out
I’m building a firefighter app that needs to automatically check in a firefighter when they arrive at the station and check them out when they leave — even if the app is killed. We need reliable enter/exit detection, low latency, and only one fixed location per user. We’re evaluating Region Monitoring, which works in the killed state but may introduce delays and inconsistent accuracy. To ensure mission-critical reliability, we are considering the Location Push Service Extension, since it can fetch precise location on demand and wake the extension even when the app is terminated. Before requesting the restricted entitlement, we need clarification on Apple’s expectations: Is Region Monitoring recommended for this fixed-location use case? Would Apple consider approving the Location Push Service Extension for a public-safety workflow? What prerequisites do we need before submitting the entitlement request (Always permission, prototype, privacy disclosures, etc.)? What details should be included in the justification form? Our goal is to follow the most reliable and Apple-approved approach for firefighter check-in/out. Any guidance would be greatly appreciated.
Replies
0
Boosts
0
Views
131
Activity
Nov ’25
iPhone push notifications stop: DeviceTokenNotForTopic
We are facing an issue: push notifications are not being received. We are using the Marketing Cloud SDK for push notifications. On install, the app correctly registers for push notifications. We pass the required information to Marketing Cloud — for example, contact key, token, etc. Marketing Cloud also confirms that the configuration is set up, and we have tried sending push notifications with proper delivery settings. The issue is that after some time, the device gets automatically opted out in the Marketing Cloud portal. When we consulted their team, they said this is caused by the “DeviceTokenNotForTopic” error received from APNs. I have verified the certificates and bundle ID from my end — everything looks correct. Device: iPhone 15, iPhone 17 iOS: 18.7.2, 26.1
Replies
1
Boosts
0
Views
187
Activity
Dec ’25
Case-ID: 14080335 Push notification requests to iOS devices using APNs (HTTP/2) time out
We are currently developing a WebAPI service that uses APNs (HTTP/2) to send push notifications to iOS devices. (Using PushSharp's HTTP/2 support) The WebAPI service is running on IIS using .net framework 4.8 and c#. The connection to APNs is always maintained, and the connection is checked every 30 minutes using a dummy token Ping. KeepAlivePeriod = 30 minutes and KeepAliveRetryPeriod = 10 seconds have also been set. However, the following issues are occurring. Although the Ping sent immediately before was successful, a TimeoutException occurs in the notification request sent a few minutes later. There is no explicit disconnection notification from APNs, and the connection appears to be silently disconnected. Once a TimeoutException occurs, it occurs frequently afterwards. Below is an excerpt from the log. Apple Notification Failed for some unknown reason 1-1: One or more errors occurred. Apple Notification Failed for some unknown reason 1-2:System.TimeoutException: The operation timed out. In light of this issue, I would like to be advised on the following two points. Are there any official specifications regarding the lifecycle and expiration date of APNs HTTP/2 connections? Even if pings are sent periodically, is there a timeout or other setting that disables the connection on the APNs side? What are the conditions that would cause APNs to silently terminate a connection? For example, could this be due to inactivity, TLS restrictions, network maintenance, etc.? If you have any official documentation or technical guidelines to improve the reliability of this system, we would appreciate it if you could share them with us. Thank you in advance.
Replies
3
Boosts
0
Views
289
Activity
May ’25
Buttons embedded in CarPlay notification
Hi All, im working on a project to send a push notification in CarPlay. Current accepted by apple entitlements is driving. Are custom actions / buttons allowed/supported in CarPlay notifications?
Replies
1
Boosts
0
Views
89
Activity
Jul ’25
LiveCommunicationKit
We are implementing a camera intercom calling feature using VoIP Push notifications (PushKit) and LiveCommunicationKit (iOS 17.4+). The app works correctly when running in foreground or background, but fails when the app is completely terminated (killed by user or system). After accepting the call from the system call UI, the app launches but gets stuck on the launch screen and cannot navigate to our custom intercom interface. Environment iOS Version: iOS 17.4+ (testing on latest iOS versions) Xcode Version: Latest version Device: iPhone (tested on multiple devices) Programming Languages: Objective-C + Swift (mixed project) Frameworks Used: PushKit, LiveCommunicationKit (iOS 17.4+) App State When Issue Occurs: Completely terminated/killed Problem Description Expected vs Actual Behavior App State Behavior Foreground ✅ VoIP push → System call UI → User accepts → Navigate to intercom → Works Background ✅ VoIP push → System call UI → User accepts → Navigate to intercom → Works Terminated ❌ VoIP push → System call UI → User accepts → App launches but stuck on splash screen → Cannot navigate Root Issues When app is terminated and user accepts the call: Data Loss: pendingNotificationData stored in memory is lost when app is killed and relaunched Timing Issue: conversationManager(_:perform:) delegate method is called before homeViewController is initialized Lifecycle Confusion: App initialization sequence when launched from terminated state via VoIP push is unclear Code Flow VoIP Push Received (app terminated): func pushRegistry(_ registry: PKPushRegistry, didReceiveIncomingPushWith payload: PKPushPayload, for type: PKPushType, completion: @escaping () -> Void) { let notificationDict = NotificationDataDecode.dataDecode(payloadDict) as? [AnyHashable: Any] let isAppActive = UIApplication.shared.applicationState == .active // Store in memory (PROBLEM: lost when app is killed) pendingNotificationData = isAppActive ? nil : notificationDict if !isAppActive { // Report to LCK try await conversationManager.reportNewIncomingConversation(uuid: uuid, update: update) } completion() } User Accepts Call: func conversationManager(_ manager: ConversationManager, perform action: ConversationAction) { if let joinAction = action as? JoinConversationAction { // PROBLEM: pendingNotificationData is nil (lost) // PROBLEM: homeViewController might not be initialized yet if let pendingData = pendingNotificationData { ModelManager.share().homeViewController.gotoCallNotificationView(pendingData) } joinAction.fulfill(dateConnected: Date()) } } Note: When user taps "Accept" on system UI, LiveCommunicationKit calls conversationManager(_:perform:) delegate method, NOT a manual acceptCall method. Questions for Apple Support App Lifecycle: When VoIP push is received and app is terminated, what is the exact lifecycle? Does app launch in background first, then transition to foreground when user accepts? What is the timing of application:didFinishLaunchingWithOptions: vs pushRegistry:didReceiveIncomingPushWith: vs conversationManager(_:perform:)? State Persistence: What is the recommended way to persist VoIP push data when app is terminated? Should we use UserDefaults, NSKeyedArchiver, or another mechanism? Is there a recommended pattern for this scenario? Initialization Timing: When conversationManager(_:perform:) is called with JoinConversationAction after app launch from terminated state, what is the timing relative to app initialization? Is homeViewController guaranteed to be ready, or should we implement a waiting/retry mechanism? Navigation Pattern: What is the recommended way to navigate to a specific view controller when app is launched from terminated state? Should we: Handle it in application:didFinishLaunchingWithOptions: with launch options? Handle it in conversationManager(_:perform:) delegate method? Use a notification/observer pattern to wait for initialization? Completion Handler: In pushRegistry:didReceiveIncomingPushWith, we call completion() immediately after starting async reportNewIncomingConversation task. Is this correct, or should we wait for the task to complete when app is terminated? Best Practices: Is there a recommended pattern or sample code for integrating LiveCommunicationKit with VoIP push when app is terminated? What are the best practices for handling app state persistence and navigation in this scenario? Attempted Solutions Storing pendingNotificationData in memory → Failed: Data lost when app is killed Checking UIApplication.shared.applicationState → Failed: Doesn't reflect true state during launch Calling gotoCallNotificationView in conversationManager(_:perform:) → Failed: homeViewController not ready Additional Information Singleton pattern: LCKCallManagerSwift, ModelManager homeViewController accessed via ModelManager.share().homeViewController Mixed Objective-C and Swift architecture conversationManager(_:perform:) is called synchronously and must call joinAction.fulfill() or joinAction.fail() Requested Help We need guidance on: Correct app lifecycle handling when VoIP push is received in terminated state How to persist VoIP push data across app launches How to ensure app initialization is complete before navigating Best practices for integrating LiveCommunicationKit with VoIP push when app is terminated Thank you for your assistance!
Replies
0
Boosts
0
Views
125
Activity
Nov ’25
Questions about using the "UserNotification framework"
In macOS, how can I use UnmutableNotificationContent notifications to prevent the main window from activating when clicking the notification? code: import Cocoa import UserNotifications // Mandatory import for notification functionality class ViewController: NSViewController { override func viewDidLoad() { super.viewDidLoad() // Automatically request permissions and send a test notification when the view loads sendLocalNotification() } /// Core method to send a local notification func sendLocalNotification() { let notificationCenter = UNUserNotificationCenter.current() // 1. Request notification permissions (Mandatory step; user approval required) notificationCenter.requestAuthorization(options: [.alert, .sound, .badge]) { [weak self] isGranted, error in guard let self = self else { return } // Handle permission request errors if let error = error { print("Permission request failed: \(error.localizedDescription)") return } // Exit if user denies permission if !isGranted { print("User denied notification permissions; cannot send notifications") return } // 2. Construct notification content using UNMutableNotificationContent let notificationContent = UNMutableNotificationContent() notificationContent.title = "Swift Notification Test" // Notification title notificationContent.subtitle = "macOS Local Notification" // Optional subtitle notificationContent.body = "This is a notification created with UNMutableNotificationContent" // Main content notificationContent.sound = .default // Optional notification sound (set to nil for no sound) notificationContent.badge = 1 // Optional app icon badge (set to nil for no badge) // 3. Set trigger condition (here: "trigger after 3 seconds"; can also use time/calendar triggers) let notificationTrigger = UNTimeIntervalNotificationTrigger( timeInterval: 3, // Delay in seconds repeats: false // Whether to repeat (false = one-time only) ) // 4. Create a notification request (requires a unique ID for later cancellation if needed) let notificationRequest = UNNotificationRequest( identifier: "SwiftMacNotification_001", // Unique identifier content: notificationContent, trigger: notificationTrigger ) // 5. Add the request to the notification center and wait for triggering notificationCenter.add(notificationRequest) { error in if let error = error { print("Notification delivery failed: \(error.localizedDescription)") } else { print("Notification added to queue; will trigger in 3 seconds") } } } } }
Replies
0
Boosts
0
Views
143
Activity
Dec ’25
Background Local cache update
Currently, I have implemented local cache update with server data when app is killed using Push Notification and Notification Service Extension. So it works even the app is killed by the user, but I wanted to know whether this is app review safe work around or not as I am not finding any documentation for this.
Replies
3
Boosts
0
Views
159
Activity
Dec ’25
Problem receiving Remote Notification in the background after Review Rejected
I created an app. One if its functionalities is receive Remote Notification in the background, while app is monitoring Significant Location Changes (SLC). This functionality worked fine. I was receiving these notifications correctly. Sometimes instantly, sometime with small or large delay. And then I send the app for review. It was rejected with 3 remarks: The app or metadata includes information about third-party platforms that may not be relevant for App Store users, who are focused on experiences offered by the app itself (I wrote that app communication works both for iOS and Android.) The app declares support for audio in the UIBackgroundModes key in your Info.plist but we are unable to locate any features that require persistent audio. EULA (End User License Agreement) is missing for in-app purchases. After the rejection the app is no longer receiving these notifications. They are there, since the app receives them, when I open app, or significant location change is detected. It also works, when I run the app directly from Xcode (in debug mode), not from TestFlight nor in Sandbox. It seem to me like Apple somehow spoiled my background capabilities on purpose or accidentally. Is it possible? What can I do with it? Is it the case that I should just fix the review remarks and send the app back to review, and once the app passes it, it will work again? Or should I not count on it? Any suggestions? I asked Apple using: https://developer.apple.com/contact/topic/#!/topic/select but so far no response.
Replies
2
Boosts
0
Views
186
Activity
Aug ’25
RESCIND_CONSENT notification not delivered in Sandbox environment
I am currently testing the Declared Age Range / Parental Consent flow in the Sandbox environment, and I am experiencing an issue where the RESCIND_CONSENT App Store Server Notification is not being delivered to my server. 🔍 Test Environment iOS version: iOS 26.2 (Sandbox environment) App Store Server Notifications: Sandbox environment 🔄 Test Scenario App Settings > Developer > Sign in with a Sandbox account Launch the app In App Settings > Developer > Sandbox Account > Management > Revoke App Consent, enter the app’s Bundle ID, tap the Revoke Consent button, and confirm that the revocation completion popup message is displayed Check whether App Store Server Notifications are received by the server Confirm that the RESCIND_CONSENT notification is not received by the server ✅ Expected Result The App Store Server sends a RESCIND_CONSENT notification to the Sandbox endpoint The notification payload includes appTransactionId The server can block app access based on the corresponding appTransactionId ❌ Actual Result No RESCIND_CONSENT notification is received in the Sandbox environment ❓ Questions Is this behavior an intended limitation of the Sandbox environment, or is it a known issue or bug? Is it possible that RESCIND_CONSENT notifications will only be delivered starting January 1, 2026? Additionally, when a RESCIND_CONSENT server notification is received, I currently update my database with the appTransactionId and the registration date. When a minor attempts to access the app, I check the latest appTransactionId status, and if the most recent state indicates consent has been revoked, I block app access and prompt the user to request parental consent again using PermissionKit.
Replies
1
Boosts
0
Views
206
Activity
Dec ’25
Use ONE_TIME_CHARGE may cause some problem
If a notification: ONE_TIME_CHARGE is used to ship the IAP content, it involves a point where the client might not finish the transaction, yet the item is shipped. Will an unfinished purchase affect refunds?
Replies
1
Boosts
0
Views
94
Activity
May ’25
Game Center and Push Notifications
I have used the Push Notifications Console and verify that the test notification reaches my device (it says "not necessarily the app"). However, GameCenter notifications are not reaching the app. When one device passes the turn, the turn is successfully passed as seen in the Matchmaker VC. However, the app does not get the turn pass notification whether or not it is running. No banner appears if the app is not running (but it does when using the Push Notifications Console). Please advise.
Replies
1
Boosts
0
Views
174
Activity
Jan ’26
APNS always returning "discarded as device was offline"
Approx Dec 13th 2025 til now (Dec 29th) I noticed my APNS dropped off to nothing daily. When I try to send APNS alerts on the developer site tool it always returns "discarded as device was offline" for multiple devices which I know are online. When I try pushing through my VPS (as I always have without any code changes for months) I get status codes of 400 and 403 mostly and a few 200's without it delivering also. I created a new sandbox certificate just in case it was that but still no luck, I get the same results. Ive checked for any firewall issues and I see the following on my VPS: nslookup gateway.push.apple.com Server: 1.1.1.1 Address: 1.1.1.1#53 ** server can't find gateway.push.apple.com: NXDOMAIN This seems like a second issue but not the primary issue that the portal is reporting. Any ideas what to check? Im at a loss as to why its not working at all through apples test notification portal on my developer account. It seems thats the initial issue I need to solve. Thank you for any ideas/help
Replies
5
Boosts
0
Views
343
Activity
Feb ’26
Getting null data from App Store Server Notification
Hello Apple Support Team, We are using auto-renew plans in our app We have set the webhook URL in our App Store Connect account to get the Store server notification to get the auto renew data for an user The issue is when a user purchases any auto-renew plan at the auto-renew time, we are getting null data from the Apple side. We have printed the log's data to check what data are coming from the Apple webhook. we have attached our logs data please check it and let me know what can we do to resolve this
Replies
1
Boosts
0
Views
124
Activity
Jun ’25
How can notification action buttons' text be center aligned?
The iOS documentation shows notification actions buttons with the text center aligned: https://developer.apple.com/documentation/usernotifications/declaring-your-actionable-notification-types But there's no apparent way for an app to control this. The buttons are controlled and rendered by the system and the text is always left aligned. Is there some way to get the text center aligned?
Replies
1
Boosts
0
Views
94
Activity
Aug ’25