I found that "search" endpoint is recently added to api.ent.apple.com : https://developer.apple.com/documentation/devicemanagement/get-catalog-search-results However it seems we cannot find custom apps using this API even with sToken. Is it not suppoted yet? Thank you

short version question: why some users after deleting and downloading back my in-house app, cannot start the new process for approving developer, but instead it tries to start and then crashes immediately? long question version I am maintaining an in-house distributed enterprise app. due to update in iOS 18 update here users need to trust the developer via a new procedure that involves restarting device and inserting the phone code. after thousands (more or less 30.000) of users with no issue at all, some of them has this problem, the old (expired)trust seems to be persistent and never updated. Standard events a user deletes the app via settings > general > VPN & device management or via classic persistent touch procedure checks no other presence of the app is on the device via spotlight. since it is the only app with "MyDeveloperName" on the phone, if users goe back to VPN & device management screen, no app or developer will be present. user downloads new version of the app. If taps directly on the icon there is a system alert with says the developer must be trusted. a this point in settings > general > VPN & device management you can find a line with developer name, tapping on it we find a screen where user finds a white button with BLUE message "authorize MyDeveloperName" and follows procedure. My issue is that some users get following different behavior, and I do not understand why: ❌ tapping on downloaded app icon: no alert, but app tries to start then crashes. ❌ going in VPN & device management screen there is only RED write button "delete app" in both paths, working and not working, the app results "verified" in VPN & device management screen (Apple says old authorizations are preserved.)

There is a longstanding restriction payload for supervised iOS devices that disables "Erase All Content and Settings." We have been experimenting with supervised watches paired with supervised phones that have that payload applied, and yet "Erase All Content and Settings" remains available on the watch. Is this: – a) An error with our payload? Should we be sending something else? – b) A bug in watchOS supervision? – c) A deliberate design choice? If so, what is the rationale for preventing organizations from maintaining this very basic level of control over devices they may be configuring and dispatching into the field?

ABM has introduced a target date for moving a device from one MDM server to a new one. However, there's nothing in the API for setting that when you use the API to move MDM server Am I missing something or does it just not exist? Thanks Caroline

The MDM was installed correctly and other commands are working fine. I have tried to send the InstallProfile with custom configuration to the device, but it was displayed as not signed. How to sign the payload for InstallProfile command and where it should be included in the payload / command? The payload I sent to a mac with MDM installed: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Payload</key> <data> BASE64_HERE </data> <key>RequestType</key> <string>InstallProfile</string> </dict> </plist> Decoded base64 from the payload above was: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>PayloadContent</key> <array> <dict> <key>PayloadContent</key> <dict> <key>com.example.myapp</key> <dict> <key>test_key</key> <string>test_value</string> </dict> </dict> <key>PayloadDisplayName</key> <string>My App Configuration</string> <key>PayloadIdentifier</key> <string>com.org_name.mdm.profile.uq_id_here</string> <key>PayloadType</key> <string>com.apple.ManagedClient.preferences</string> <key>PayloadUUID</key> <string>UUID4 HERE</string> <key>PayloadVersion</key> <integer>1</integer> </dict> </array> <key>PayloadDisplayName</key> <string>App Configuration Profile</string> <key>PayloadIdentifier</key> <string>com.example.myapp.config</string> <key>PayloadOrganization</key> <string>ORG NAME</string> <key>PayloadType</key> <string>Configuration</string> <key>PayloadUUID</key> <string>ANOTHER UUID4 HERE</string> <key>PayloadVersion</key> <integer>1</integer> </dict> </plist> System logs from Device: [*] Processing server request: InstallProfile for: <Device> [ERROR] System keychain reported it is unavailable but will proceed as if it is. [*] === CPF_InstallProfile === com.example.myapp.config (user: <Computer>) (source: 'MDM') [*] >>>>> Sending HTTP request (PUT) [Acknowledged(InstallProfile) [*] <<<<< Received HTTP response (200) [Acknowledged(InstallProfile) [*] Processing server request: ProfileList for: <Device> [*] >>>>> Sending HTTP request (PUT) [Acknowledged(ProfileList) [*] <<<<< Received HTTP response (200) [Acknowledged(ProfileList) Also the ProfileList didn't include the installed profile. Is it because it was unsigned? How it should be signed?

Hi, My client has already developed an ios app and they need an enterprise account to publish the app. What are the procedures to create enterprise account?

Hello, We're testing the new allowedExternalIntelligenceWorkspaceIDs key in the MDM Restrictions payload on supervised iPads. According to Apple's documentation, this key expects an "external integration workspace ID", but it's not clear what this specifically refers to. We've tried the following IDs individually (one at a time, as documentation says only one is supported currently): OpenAI Organization ID ChatGPT user email Apple ID used in ChatGPT Google ID used in ChatGPT login The profile installs correctly via MDM and the key is set, but we want to confirm: What exactly is considered a valid "external integration workspace ID" for this key? Is there a way to verify that the restriction is working as intended on the device (e.g. does it limit specific integrations or apps)? Is there an official list of services that currently support this? Any clarification from Apple or other developers with experience on this would be very helpful. Thanks in advance.

Hello All, I am currently attempting to get application config working with enterprise apps but it seems as though the asset config is not applying at all. While the asset and application install correctly it does not seem that the config is read at all judging from the status message returned. "StatusItems" : { "app" : { "managed" : { "list" : [ { "name" : "apps", "config-state" : { "app-config-state" : { "state" : "unknown" } }, "identifier" : "app.identifier", "version" : "3.2", "short-version" : "3.2.0", "state" : "managed", "declaration-identifier" : "dec-identifier" } ] } } }, "Errors" : [ ] } The asset file being sent down is as follows: <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Config 1</key> <string>Value 1</string> <key>Config 2</key> <string>Value 2</string> <key>Config 3</key> <string>Value 3</string> </dict> </plist> This is the config report being sent back by the device after everything has been fetched: "StatusItems" : { "management" : { "declarations" : { "activations" : [ { "active" : true, "identifier" : "group.activation.payload", "valid" : "valid", "server-token" : "56792E4AE25C3286640B45E6BD265AE97545B2B87F90A6355919FD8B2E3C3AB3" } ], "configurations" : [ { "active" : true, "identifier" : "app.install", "valid" : "valid", "server-token" : "34D7ACECAE16EE9EEAC0630FF2FF85524FFBB5BA3CB18CFB6296FBC860368C85" }, { "active" : true, "identifier" : "ios.policy.subscription.list", "valid" : "valid", "server-token" : "376913E11BE7D26EC745B3B68C6FA94C4FC061B1B736D143EBE0F12FF73ADFF8" } ], "assets" : [ { "active" : true, "identifier" : "app.config.reference", "valid" : "valid", "server-token" : "1CFBE30EB56309005F742D667B80242E6A3CDC08ED228D0BC5F87749C6BBAB77" } ], "management" : [ ] } }, "app" : { "managed" : { "list" : [ { "state" : "downloading", "declaration-identifier" : "app.install", "identifier" : "app.identifier", "name" : "apps", "config-state" : { "app-config-state" : { "state" : "unknown" } } } ] } } }, "Errors" : [ ] } Additional info would be useful, though a sysdiagnosis will be submitted to feedback as well. Config did apply correctly when sending down through Install application command

Hi, I was looking for advice on the suitable mac to get for a web app development project for university . Would an Apple MacBook Air 2020 M1 8GB RAM 256GB SSD 13.3" macOS Big Sur, be sufficient ?? Or would I need a newer version !

My application supports Custom URL Schema which is used to perform an open operation. My application is used as a helper app for MDM, hence it will be installed as a Managed Application. I want only the other Managed Applications to be able to invoke the Custom URL Schema and not allow it for unmanaged applications. Is there any such provision provided by Apple MDM protocol?

This test setup is Jamf Pro as the MDM with Entra as the IdP. PSSO is working on Sequoia devices. Prior to Tahoe, PSSO required the following three items: An existing local account, the delivery of Company Portal, and a profile containing PSSO payload. Based on the Tahoe announcement, it looks like PSSO is now available during Setup Assistant, removing the requirement of first creating a local account. I assume this means that the requirements now as easy as deploying Company Portal and the PSSO profile during the Pre-Stage policy. I attempted this on the macOS 26 beta 1 and during Setup Assistant, with the PSSO profile delivered, Setup Assistant prompts me to login to my IdP. However, pressing Continue will result in a failure, notifying me that the application required is not available. The continue button is now inactive but a "try again" button is available. This results in the loop of trying and then failing, stating that the required application is not available. I eventually must quit Setup Assistant which exits it and drops me at the login window. The only account that is visible is the management account. A trip into DFU and an IPSW restore then follows. Am I trying this too soon? Is PSSO at Setup Assistant not yet fully supported? Is there another requirement other than delivering Company App in the prestige alongside the profile? I've enabled the beta channel in MAU but there is no newer Company Portal being offered. Any guidance here would be appreciated as this is the PSSO announcement I've been waiting for since the deprecation of Apple Enterprise Connect.

I'm currently implementing a managed app using the new AppConfig specification. I referred to Apple's official documentation: Specifying and decoding a configuration. Based on the example provided in the "Publish your configuration specification" section, I structured my application configuration plist like this: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>configuration</key> <dict> <key>account</key> <dict> <key>username</key> <string>test user</string> <key>password</key> <string>test 123</string> </dict> <key>domain</key> <string>test example.com</string> </dict> </dict> </plist> When I deployed this configuration via my MDM server, the server reported valid for the activation, configuration and asset (which is the plist), but the configuration did not reflect or apply within my app. My app was unable to retrieve these settings. After some troubleshooting, I found that removing the top-level <key>configuration</key> wrapper resolved the issue. The following plist structure successfully pushed the configuration to my app: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>account</key> <dict> <key>username</key> <string>test user</string> <key>password</key> <string>test 123</string> </dict> <key>domain</key> <string>test example.com</string> </dict> </plist> My question is: Is the inclusion of the <key>configuration</key> wrapper (as shown in the Apple documentation example) incorrect for the current AppConfig implementation? Or is this structure intended for a future release (e.g., iOS 26 or beyond) and the documentation implicitly refers to it, causing confusion for current implementation? Any clarification would be greatly appreciated! Thank you!

Hello, I’ve run into an issue with a configuration profile on my supervised iPhone. I’m wondering if anyone here might be able to help? The profile contains the allowListedAppBundleIDs key within the restrictions payload. My Apple Watch is paired with the iPhone. The iPhone was supervised manually with Apple Configurator, hence the Apple Watch has not been directly supervised itself. The profile works completely as expected when installed on the phone. As soon as the profile is installed on the iPhone, I can witness the apps on the Apple Watch rearrange themselves as some apps are hidden. So clearly the profile is applying its restrictions to the Apple Watch to some degree. My issue however is that apps listed in the whitelist are hidden from the Watch. The apps that are missing from my Watch are Walkie Talkie, Find My Items, Find My Friends, Messages, Alarm, Remote, Now Playing, Sleep, Meditation and Heart Rate. This is despite the following bundle IDs being listed in the whitelist array: com.apple.findmy.findpeople, com.apple.findmy.finddevices, com.apple.HeartRate, com.apple.SessionTrackerApp, com.apple.NanoWorldClock, com.apple.findmy.finditems, com.apple.Mind, com.apple.NanoOxygenSaturation, com.apple.watchmemojieditor com.apple.NanoSleep com.apple.NanoNowPlaying com.apple.noise com.apple.tincan com.apple.NanoRemote com.apple.NanoAlarm com.apple.private.NanoTimer com.apple.NanoStopwatch I’ve done some testing, but not sure what I’ve found really. I’ve so far identified 3 scenarios. Scenario 1: I have the whitelist profile installed on the iPhone. I download an app that appears in the whitelist from my watch (or at least its iPhone version does). The apps show up on the iPhone automatically and can be launched there. These apps cannot be launched on the watch. Scenario 2: I downloaded a few apps to my watch, that didn’t automatically install on my iPhone at the same time. They were on the whitelist. These ones couldn’t be launched from my Watch. I then downloaded them to the iPhone and they could be launched there (since they were on the whitelist). Scenario 3: A couple of 3rd party apps on the whitelist could be downloaded and launched from the watch with the whitelist installed. It seems as though there are different kinds of Apple Watch app and this is what I’ve read elsewhere. First of all there are Watch-only apps, which do not automatically install a companion iPhone app. Secondly there are companion apps, which when installed from the Watch App Store download their companion app to the iPhone in the background. Someone please correct me - I’m bound to be overlooking something here. So maybe the apps that when installed from Watch automatically install on iPhone and can only be launched from the iPhone have a separate bundle ID for their Watch app which I haven’t included? Apps that are on the whitelist AND do not automatically install an iPhone app AND can be launched from the Watch, include: solstice What3words So maybe these do not need a companion app, but have the same Bundle ID as their iPhone app? However, I’m still not sure why many stock Apple Watch apps are missing from the Watch…. The most obvious answer is that I’ve got their Bundle IDs wrong, but I don’t think I have given I extracted the bundle IDs from the App Store pages of the Apple WatchOS apps. I noticed at this Apple Support page (https://support.apple.com/en-gb/guide/deployment/dep34c5cd30f/1/web/1.0) that there is no mention of whitelisting or blacklisting apps on WatchOS using MDM, yet something definitely happens on the watch when the configuration profile is installed on the iPhone. Furthermore, if I tap on a configuration profile, which comprises a blacklist, on my iPhone it will ask me if I want to install it on the iPhone or Watch. The same pop-up question doesn’t happen when the profile contains a whitelist. All this to say, I’m massively confused as to why I can’t get this working. I’d really appreciate anyone’s advice which is bound to be expert. Thank you

Recently, we have encountered some users who have been unable to open the enterprise signature application after upgrading to version 18.3.2, without an IPS file. Through system logs, we found that signature verification has occurred SecKeyVerifySignature failed: Error Domain=NSOSStatusErrorDomain Code=-50 "rsa_pub_crypt failed, ccerr=-7" UserInfo={numberOfErrorsDeep=0, NSDescription=rsa_pub_crypt failed, ccerr=-7} Waiting for the information, I will provide the obtained system logs below. The application package name that crashed is com. mobile. moa aa.txt new

"If your app includes any links outside the app, or offers any in-app or other purchasing opportunities, make sure these are behind a parental gate" Super Awesome and Kidoz are proving with a parental gate on ad click and they also claim that all ads are manually approved (another criteria for ads in Kids apps). So these two are the only ad networks we can use moving forward. Or we can use ad networks like Admob as well? I dont intend not to be in Kids category - so leaving Kids category is not a choice.

When I try to sign in Managed Apple ID in supervised device there appears a prompt stating that "Apple ID" is a work account.This account must be signed in as a work account on this device.When I click continue it takes to VPN and device management tab where MDM profile already exists. Note:The managed Apple ID has a ICloud subscription for it. When I remove the subscription for the Apple ID and try to sign in, it works. Kindly help on this or advise on any additional steps required to enable sign in for managed Apple ID in this scenario

Hello, I have implemented my virtual meeting extension and my application shows no issues in the calendar application, with a join button displayed. Everything is great!. However, with the help of EKEventEditViewController and EKEvent instances, when creating an event from the main target of the application using EventKitUI, the event will not be displayed as a virtual meeting. I have seen that other applications like Zoom have already implemented this, and I find it difficult to find relevant documentation on how to link events created by the program to virtual meetings. How do I set an event as a meeting when I want to add it to the main program? In addition, the function in the VirtualConferenceProvider.swift file of the extension program fetchVirtualConference(identifier: EKVirtualConferenceRoomTypeIdentifier, completionHandler: @escaping (EKVirtualConferenceDescriptor?, (any Error)? ）->Void) How are the parameters in this function obtained? It's impossible for every conference related link to be the same

"To receive payments from Apple, you must add a bank account." As an Apple "Individual" developer, can I accept payments to my corporate card?

m personal iPhone is managed by an Unauthorized and Unknown mdm management team, The profile isn’t showing up in VPN Settings and I can’t remove them from having Remote access and control over my Personal Device! I’ve SPENT MANY MONTHS TRYING TO GET SUPPORT VIA EMAILING APPLE DEVELOPER AND SPEAKING TO APPLE SUPPORT WHICH HAS BEEN EXTREMELY EXHAUSTING AND HUMILIATIN! I’ve resorted to contacting Internet crime websit, the federal trade commissio, Better business bureau and Consumer Affairs to file an online complaint against Apple for not complying with their Security and Privacy policy for consumers accounts! Because of this unauthorized and unknown mdm device management profile I don’t have COMPLETE CONTROL OVER MY OWN IPHONE! ! Unable to find a team with the given Team II 'L95TAW5KWP' to which you belong. Pleas Developer Program Support. https://developer.apple.com/support I contacted developer support via email and also tried calling but they don’t respond!

I have an in house application that I develop for my company. The application requires our corporate MDM profile is installed on the phone. I recently got a new phone and our corporate IT team installed the MDM profile and the Comp Portal application for me to manage our corporate applications. I installed the application through the Comp Portal. It crashes right away when I launch the application and I see this error message in the Console when connected to the phone: "SpringBoard Snapshot generation request for bundleID: com.mycompany.mygroup.appName rejected due to the app being denylisted." I see other errors from runningboardd about failing to spawn the job and SpringBoard Bootstrapping failed for &lt;FBApplicationProcess: 0x510affd80; app&lt;com.mycompany.mygroup.appName&gt;:&gt; with error: &lt;NSError: 0x301e60090; domain: RBSRequestErrorDomain; code: 5; "Launch failed."&gt; I can launch a development version of the application with no problem by connecting the USB cable from my machine to my device and running through XCode. Other people have no problems launching the application. I compared all the certificates in the management profile with another device where the application does not crash and there are identical. We checked a number of settings on the devices to see if there could be something preventing the application from running but found nothing. We reset all settings and deleted and reinstalled the application with rebooting to see if perhaps it was an incomplete installation. Our IT folks want to wipe the phone and start over but I have little confidence that will fix the issue since we don't know the root cause. I am concerned that one of my Stakeholders might have the same issue if they get a new device. This application worked fine on my old phone. Device: iPhone 16 Pro Max iOS version: 18.2.1 Any ideas on next steps to troubleshoot this issue? How can I figure out the cause of the denylisting?