can you make a profit with the seed program

I am a developer distributing an enterprise app. Recently, some users have intermittently encountered an error message on iOS 18.5 stating: "Unable to install this app because its integrity could not be verified." While the issue could not be reproduced on iPhone 15 / iOS 18.5, we have received reports that it does occur on the following devices: iPhone 14 / iOS 18.5, iPhone 14 Pro / iOS 18.5, iPhone 14 Plus / iOS 18.5, iPhone 16 Pro Max / iOS 18.5, Are there any known issues or recommended solutions regarding this behavior? Thank you in advance for your assistance.

Hello all, We have built our own MDM solution as we plan to support quite a few devices running iOS. Manual activation is running fine and devices are checking in. We have setup ABM with Device management service setup and linked to our MDM. We have added reseller via Apple customer number and purchased devices are showing in ABM. We have setup default management service assignment as well. When we are setting up a device it gives an error: Remote Management The configuration for your iPhone could not be downloaded from . cancelled Error in the device log is as follows: Jun 11 14:16:36 iPhone Setup(DMCUtilities)[626] : <DMCHTTPRequestor: 0x84cfd7d40> cannot accept the authentication method NSURLAuthenticationMethodClientCertificate Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Task <663D2346-4B73-4DB2-A134-B1A7DC58E70B>.<1> auth completion disp=2 cred=0x0 Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Task <663D2346-4B73-4DB2-A134-B1A7DC58E70B>.<1> summary for task failure {transaction_duration_ms=285, response_status=-1, connection=7, reused=1, reused_after_ms=0, request_start_ms=0, request_duration_ms=0, response_start_ms=0, response_duration_ms=0, request_bytes=0, request_throughput_kbps=0, response_bytes=0, response_throughput_kbps=0, cache_hit=false} Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Connection 7: TLS Client Certificates encountered error 1:89 Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Task <663D2346-4B73-4DB2-A134-B1A7DC58E70B>.<1> finished with error [-999] Error Domain=NSURLErrorDomain Code=-999 UserInfo={NSErrorFailingURLStringKey=, NSErrorFailingURLKey=, _NSURLErrorRelatedURLSessionTaskErrorKey=, _NSURLErrorFailingURLSessionTaskErrorKey=, NSLocalizedDescription=} Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Connection 7: encountered error(1:89) Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Connection 7: cleaning up Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Connection 7: summary for unused connection {protocol="http/1.1", domain_lookup_duration_ms=0, connect_duration_ms=0, secure_connection_duration_ms=0, private_relay=false, idle_duration_ms=0} Jun 11 14:16:36 iPhone Setup(DMCUtilities)[626] : <DMCHTTPRequestor: 0x84cfd7d40> failed to communicate with the MDM server. Error: NSURLError:Desc : cancelled Domain : NSURLErrorDomain Code : -999 Extra info: { NSErrorFailingURLKey = "https://mdm.domainname/enroll"; NSErrorFailingURLStringKey = "https://mdm.domainname/enroll"; "_NSURLErrorFailingURLSessionTaskErrorKey" = "LocalDataTask <663D2346-4B73-4DB2-A134-B1A7DC58E70B>.<1>"; "_NSURLErrorRelatedURLSessionTaskErrorKey" = ( "LocalDataTask <663D2346-4B73-4DB2-A134-B1A7DC58E70B>.<1>" ); }

We install two in-house apps. The first app is installed using the standard in-house method, while the second app is installed via MDM commands. Both apps share the same Team ID and use Keychain sharing to exchange data. However, when the MDM profile is deleted and the second app is removed, the first app intermittently encounters issues and does not function properly. However, when the MDM mobileconfig is reinstalled and the second app is installed again, the first app that was not functioning starts working properly. We have thoroughly reviewed the logs but have not been able to find a solution. Your assistance would be greatly appreciated. We have extracted and attached the device logs that were generated during the error occurrence. log.log

how can i generate MDM Push Certificate for my own MDM server. Please guide me on that.

This is in reference to the feedback ticket : https://feedbackassistant.apple.com/draft/57929340, we would like to know if there are any test enterprise websites that Apple can suggest to test passkeys declaration.

How to test ManagedAppConfigurationProvider without MDM ? Task { /* Configuration provider task */ for await configuration in configurationProvider.configurations(MyAppConfiguration.self) { self.configuration = configuration ?? MyAppConfiguration.defaultConfiguration } } Can the existence of a configuration be simulated, e.g. by storing a mocked configuration in UserDefaults? The UserDefaults key "com.apple.configuration.managed" seems not relevant here.

m personal iPhone is managed by an Unauthorized and Unknown mdm management team, The profile isn’t showing up in VPN Settings and I can’t remove them from having Remote access and control over my Personal Device! I’ve SPENT MANY MONTHS TRYING TO GET SUPPORT VIA EMAILING APPLE DEVELOPER AND SPEAKING TO APPLE SUPPORT WHICH HAS BEEN EXTREMELY EXHAUSTING AND HUMILIATIN! I’ve resorted to contacting Internet crime websit, the federal trade commissio, Better business bureau and Consumer Affairs to file an online complaint against Apple for not complying with their Security and Privacy policy for consumers accounts! Because of this unauthorized and unknown mdm device management profile I don’t have COMPLETE CONTROL OVER MY OWN IPHONE! ! Unable to find a team with the given Team II 'L95TAW5KWP' to which you belong. Pleas Developer Program Support. https://developer.apple.com/support I contacted developer support via email and also tried calling but they don’t respond!

We’re looking for best practices to remotely update iOS apps that are deployed in Single App Mode (SAM) or Autonomous Single App Mode (ASAM), managed through MDM. Imagine a typical use case: an iPad installed as a self-service kiosk at an airport restaurant. We need to update the app periodically without: Displaying any prompts to the user Relying on the user to approve or initiate the update (since the device is unattended) Sending technicians onsite, as many devices are in remote locations MDM providers have stated, “This is how Apple handles it,” without offering a workable solution. We’re hoping someone here has experience or suggestions for: Seamless or silent app updates in SAM/ASAM Update workflows that avoid interruptions or user interaction Any proven strategies or automation options under MDM supervision Any insight or documented approaches would be greatly appreciated. Thank you!

Hello folks, I stumbled upon a weird CNContact serialization problem. I use the Contacts framework to update the AIM field, which is one of the instantMessageAddresses within a single Contact. Here is the simplified code I used: func updateAIMFieldOn(contact: CNContact, aimValue: String) { do { guard let mutableContact = contact.mutableCopy() as? CNMutableContact else { logger.error("[CM] Couldn't update contact with aim \(aimValue)") return } var updatedAddresses = mutableContact.instantMessageAddresses updatedAddresses.append(CNLabeledValue(label: "", value: CNInstantMessageAddress(username: aimValue, service: CNInstantMessageServiceAIM))) mutableContact.instantMessageAddresses = updatedAddresses let saveRequest = CNSaveRequest() saveRequest.update(mutableContact) try CNContactStore().execute(saveRequest) logger.verbose("Contact's AIM updated successfully!") } catch { logger.error("Couldn't update contact") } } And after serializing the contact to data, and then deserializing, the contact got two AIM fields with the same value: X-AIM;type=pref:some:part:of_my_aim_value IMPP;X-SERVICE-TYPE=AIM;type=pref:some:part:of_my_aim_value Why does it work in this manner? Is it possible that ":" char causes that? Format of my aim username is {some:part:of_my_aim_value}. I didn't find any information in the docs. Thanks!

Three months ago I molded a mold program. I believe could be tweaked and tried unlined zero code. swear. anyway I would like to scale with some people if I can go to commercial area code phoned series and calls.and if I have rights. but my next moves for them. on iOS I think they should have a seri settings. where they can call seri.on settings, and it jump many codes-and navigation is hard. plus I think seri can help in settings expecially since seri settings is verbal drop. if the words fit or are similar it cues goes to but you have to hard call the switch.so there’s no hey no Sami where you setting no Sammy right I think it could skip cauldron and everything verbally either. Seri settings I think iOS should try it.

It's a great platform to grow your knowledge. Apple Teacher

I am checking the response of DeviceInformation Command to collect network information from iPad. On iPad(iPad Pro 11, M4) devices that use WiFi without inserting Usim or Esim, network values ​​such as CurrentMCC and ICCID are received in response to the DeviceInformation command. cf.)Even though it may be garbage value, I blurred the unique information just in case. <key>ServiceSubscriptions</key> <array> <dict> <key>CarrierSettingsVersion</key> <string>61.0</string> <key>CurrentCarrierNetwork</key> <string></string> <key>CurrentMCC</key> <string>450</string> <key>CurrentMNC</key> <string>08</string> <key>EID</key> <string>blah blah</string> <key>ICCID</key> <string>blah balh</string> <key>IMEI</key> <string>blah blah</string> <key>IsDataPreferred</key> <true/> <key>IsRoaming</key> <true/> <key>IsVoicePreferred</key> <false/> <key>Label</key> <string>Provisioning</string> <key>LabelID</key> <string>00000000-0000-0000-0000-000000000000</string> <key>PhoneNumber</key> <string></string> <key>Slot</key> <string>CTSubscriptionSlotOne</string> <key>SubscriberCarrierNetwork</key> <string>iPad</string> </dict> </array> This is a bit weird. If I collect the same information from an iPhone(iPhone 15 Pro Max) that only uses wifi and does not use Usim or Esim, it does not respond with values ​​like ICCID, CurrentMCC, etc. <key>ServiceSubscriptions</key> <array> <dict> <key>IMEI</key> <string>blah blah</string> <key>Slot</key> <string>CTSubscriptionSlotOne</string> </dict> <dict> <key>EID</key> <string>blah blah</string> <key>IMEI</key> <string>blah blah</string> <key>Slot</key> <string>CTSubscriptionSlotTwo</string> </dict> </array> I'm confused by the network information collected. Is there a reason why the collected network information of iPad and iPhone are different?

I have enrolled a macbook through ADE to Apple School Manager and register it to the MDM service. Upon sending the initial DeclarativeManagement payload, the device return the client capabilities as below: "supported-versions": [ "1.0.0" ], "supported-payloads": { "declarations": { "activations": [ "com.apple.activation.simple" ], "assets": [ "com.apple.asset.credential.acme", "com.apple.asset.credential.certificate", "com.apple.asset.credential.identity", "com.apple.asset.credential.scep", "com.apple.asset.credential.userpassword", "com.apple.asset.data", "com.apple.asset.useridentity" ], "configurations": [ "com.apple.configuration.account.caldav", "com.apple.configuration.account.carddav", "com.apple.configuration.account.exchange", "com.apple.configuration.account.google", "com.apple.configuration.account.ldap", "com.apple.configuration.account.mail", "com.apple.configuration.account.subscribed-calendar", "com.apple.configuration.legacy", "com.apple.configuration.legacy.interactive", "com.apple.configuration.management.status-subscriptions", "com.apple.configuration.management.test", "com.apple.configuration.math.settings", "com.apple.configuration.passcode.settings", "com.apple.configuration.safari.extensions.settings", "com.apple.configuration.screensharing.connection", "com.apple.configuration.screensharing.connection.group", "com.apple.configuration.security.certificate", "com.apple.configuration.security.identity", "com.apple.configuration.security.passkey.attestation" ], "management": [ "com.apple.management.organization-info", "com.apple.management.properties", "com.apple.management.server-capabilities" ] }, "status-items": [ "account.list.caldav", "account.list.carddav", "account.list.exchange", "account.list.google", "account.list.ldap", "account.list.mail.incoming", "account.list.mail.outgoing", "account.list.subscribed-calendar", "device.identifier.serial-number", "device.identifier.udid", "device.model.family", "device.model.identifier", "device.model.marketing-name", "device.model.number", "device.operating-system.build-version", "device.operating-system.family", "device.operating-system.marketing-name", "device.operating-system.supplemental.build-version", "device.operating-system.supplemental.extra-version", "device.operating-system.version", "management.client-capabilities", "management.declarations", "screensharing.connection.group.unresolved-connection", "security.certificate.list", "test.array-value", "test.boolean-value", "test.dictionary-value", "test.error-value", "test.integer-value", "test.real-value", "test.string-value" ] }, "supported-features": { } } }, com.apple.configuration.softwareupdate.enforcement.specific couldn't be found. The macbook current OS version is 15.5 and it's supervised so looking at this, I assume it should include the Software Update:Enforcement:Specific capability? https://github.com/apple/device-management/blob/release/declarative/declarations/configurations/softwareupdate.enforcement.specific.yaml When I tried sending the payload to the device anyway the valid status is unknown

I am trying to find clarification on something. We are seeing strange cases where customer devices seem to unenroll themselves after a period of MDM inactivity. This seems to tie into roughly when their identity certificate has expired. We can't confirm this because the device has since unenrolled. Is there any case where an Apple device will automatically unenroll if it's identity certificate has expired? This doesn't always seem to happen - I had a device respond immediately after being switched off for a year - but could this be down to some devices being DEP enrolled and others manually enrolled?

Hi Apple Team & Community, The new Introduction of Platform SSO during ADE Enrollment is Great And we tried implementing this. As a Rule mentioned in the Documentation Initially MDM Server should send 403 response with Response Body adhering to ErrorCodePlatformSSORequired when HTTP Header for MachineInfo request contains MDM_CAN_REQUEST_PSSO_CONFIG and set to true There are contradictory claims mentioned in Document, In Process Platform SSO Required Response it is mentioned that MDM Server should send body as JSON Object for ErrorCodePlatformSSORequired Example below >>>>> Response HTTP/1.1 403 Forbidden Content-Type: application/json Content-Length: 558 { "code": "com.apple.psso.required", "description": "MDM Server requires the user to authenticate with Identity Provider - BY MEMDM", "message": "The MDM server requires you to authenticate with your Identity Provider. Please follow the instructions provided by your organization to complete the authentication process - BY MEMDM", "details": { "Package": { "ManifestURL": "https://platform-sso-node-server.vercel.app:443/manifest" }, "ProfileURL": "https://platform-sso-node-server.vercel.app:443/profile", "AuthURL": "https://platform-sso-node-server.vercel.app:443/auth" } } But in the same Document a Sample HTTP Response was Provided but seems to be XML format as below >>>>> Response HTTP/1.1 403 Forbidden Content-Type: application/xml Content-Length: 601 <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Code</key> <string>com.apple.psso.required</string> <key>Details</key> <dict> <key>ProfileURL</key> <string>https://mdmserver.example.com/psso.mobileconfig</string> <key>Package</key> <dict> <key>ManifestURL</key> <string>https://mdmserver.example.com/psso-app.plist</string> </dict> <key>AuthURL</key> <string>https://idp.example.com/authenticate</string> </dict> </dict> </plist> From Github I assume that both Response Types are welcomed hence I tried with Both Followed in JSON Mode, I redirected the HTTP request if MachineInfo contains MDM_CAN_REQUEST_PSSO_CONFIG and set to true to https://platform-sso-node-server.vercel.app/redirectedDEPJSON Followed in XML Mode, I redirected the HTTP request if MachineInfo contains MDM_CAN_REQUEST_PSSO_CONFIG and set to true to https://platform-sso-node-server.vercel.app/redirectedDEPXML In both Response Modes OS is not proceeding after and a error Stating Enrollment with Management Server Failed , Forbidden request (403) appears Can someone kindly guide on where I missed, or is this any OS Bug in Tahoe 26?

As we know, we can't add restrictions payload in the mobileconfig when registing the device. We are developing MDM by ourselfs, met some trouble. Please help.

I'm currently implementing a managed app using the new AppConfig specification. I referred to Apple's official documentation: Specifying and decoding a configuration. Based on the example provided in the "Publish your configuration specification" section, I structured my application configuration plist like this: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>configuration</key> <dict> <key>account</key> <dict> <key>username</key> <string>test user</string> <key>password</key> <string>test 123</string> </dict> <key>domain</key> <string>test example.com</string> </dict> </dict> </plist> When I deployed this configuration via my MDM server, the server reported valid for the activation, configuration and asset (which is the plist), but the configuration did not reflect or apply within my app. My app was unable to retrieve these settings. After some troubleshooting, I found that removing the top-level <key>configuration</key> wrapper resolved the issue. The following plist structure successfully pushed the configuration to my app: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>account</key> <dict> <key>username</key> <string>test user</string> <key>password</key> <string>test 123</string> </dict> <key>domain</key> <string>test example.com</string> </dict> </plist> My question is: Is the inclusion of the <key>configuration</key> wrapper (as shown in the Apple documentation example) incorrect for the current AppConfig implementation? Or is this structure intended for a future release (e.g., iOS 26 or beyond) and the documentation implicitly refers to it, causing confusion for current implementation? Any clarification would be greatly appreciated! Thank you!

Hi everyone, I’m sharing this because I’ve been stuck with this issue for over two weeks, and I still haven’t found a solution — or received a meaningful response from Apple Support. A yellow banner has appeared on my account saying: “The Apple Developer Program License Agreement has been updated and needs to be reviewed.” But here’s the problem: I’ve already accepted the latest agreement long ago. When I log into both: App Store Connect Developer Portal …there’s no new agreement to accept, no prompt, no button — absolutely nothing new. The yellow banner simply refuses to go away, and it's preventing updates. I’ve already: Cleared cache & cookies Tried Safari, Chrome, Firefox Logged in from different devices/networks Verified that I am the Account Holder Reported the issue via Apple Developer Support (more than a week ago) Despite clearly stating the urgency of the matter, I’ve received no fix and no timeline. This is beginning to feel like developers’ time — especially for those who depend on timely releases — isn’t being taken seriously. So I’m writing here to ask: 🔹 Has anyone else encountered this same issue recently? 🔹 Is there any known workaround or fix? I’d appreciate any help or shared experience. Thank you.

I have come across this Hideable attribute for managed apps, introduced in iOS 18.1, and I've encountered some behavior that seems to contradict the official documentation. According to Apple's documentation for app.managed.yaml, setting the Hideable key to false under the Attributes section should prevent a user from hiding the app. The documentation explicitly states: If false, the system prevents the user from hiding the app. It doesn't affect the user's ability to leave it in the App Library, while removing it from the Home Screen. I have configured this in my app.managed.yaml and successfully applied the profile to my test device via our MDM server. However, I am still able to hide the application from both the Home Screen and the App Library. Here are the steps I'm taking to hide the app: Long-press the app icon on Home Screen Select "Require Touch ID" Select "Hide and Require Touch ID" Authenticate using Touch ID Select "Hide App" After these steps, the app is no longer visible on the Home Screen or in the App Library, which is contrary to the behavior described in the documentation for when Hideable is set to false. My question is: Is this a known issue or a potential bug in iOS 18.1? Or, is there an additional configuration profile or a specific device supervision requirement that I might be missing to enforce this restriction correctly? Any clarification would be greatly appreciated! Thank you!