I have a simple organization-info declaration that contains the following: "Identifier": "com.example.declaration.org-info", "Payload": { "Email": "info@example.com", "Name": "Example Organization Info", "URL": "http://example.com" }, "ServerToken": "c23b40ca47b11420", "Type": "com.apple.management.organization-info" } And an activation that includes the org-info declaration: "Identifier": "com.example.activation.org-info", "Payload": { "StandardConfigurations": [ "com.example.declaration.org-info" ] }, "ServerToken": "5f6c37a6a0c44e35", "Type": "com.apple.activation.simple" } When I check the status of the declaration, I see the following error: "StatusItems": { "management": { "declarations": { "activations": [ { "reasons": [ { "details": { "Identifier": "com.example.activation.org-info", "ServerToken": "5f6c37a6a0c44e35", "ConfigurationIdentifiers": "com.example.declaration.org-info" }, "description": "Activation (com.example.activation.org-info:5f6c37a6a0c44e35) is missing configurations.", "code": "Error.MissingConfigurations" } ], "active": false, "identifier": "com.example.activation.org-info", "valid": "valid", "server-token": "5f6c37a6a0c44e35" } ], "configurations": [], "assets": [], "management": [ { "active": false, "identifier": "com.example.declaration.org-info", "valid": "valid", "server-token": "542fded47e432de3" } ] } } }, "Errors": [] } I'm not seeing the error in either the activation or the declaration that might throw this error. Does anyone have any insight?

What is the proper payload for the FDEFileVault? Do I need to provide a user password in the payload to proceed with turning on the FileVault? Isn't that a privacy issue? Why UserEntersMissingInfo does not work for me? How to properly turn off FileVault - every try failed? Below I attach tested payloads and results. Test 1: Enable: "On" Result 1: Error ErrorCode: -319 LocalizedDescription: The ‘FileVault Settings’ payload could not be installed. User authentication failed. Test 2: Enable: "On" Username: "username on a device" Result 2: Error ErrorCode: -319 LocalizedDescription: The ‘FileVault Settings’ payload could not be installed. User authentication failed. Test 3: Enable: "On" Username: "username on a device" Password: "password of the user" Result 3: Success: FileVault turned On Test 4: After previously turning On FileVault successfully after restarting a machine. Enable: "Off" Result 4: Fail: FileVault didn't turn off, but the profile in settings updated. The machine restart didn't help. Test 5: Enable: "On" UserEntersMissingInfo: True Result 5: Error ErrorCode: -319 LocalizedDescription: The ‘FileVault Settings’ payload could not be installed. User authentication failed. Test 6: Enable: "On" Username: "username on a device" UserEntersMissingInfo: True Result 6: Error ErrorCode: -319 LocalizedDescription: The ‘FileVault Settings’ payload could not be installed. User authentication failed. Test 7: This is example payload from: https://developer.apple.com/documentation/devicemanagement/fdefilevault#Profile-Example Defer: True Enable: "On" ShowRecoveryKey: True UseKeychain: False UseRecoveryKey: True UserEntersMissingInfo: False Result 7: Success: FileVault turned On Test 8: Same as test 4, but after turning on like test 7. Test 9: Defer: True Enable: "Off" ShowRecoveryKey: True UseKeychain: False UseRecoveryKey: True UserEntersMissingInfo: False Result 9: Fail: FileVault didn't turn off, but the profile in settings updated. The machine restart didn't help. Test 10: Defer: True Enable: "Off" ShowRecoveryKey: True UseKeychain: False UseRecoveryKey: True UserEntersMissingInfo: True Result 10: Fail: FileVault didn't turn off, but the profile in settings updated. The machine restart didn't help. Test 11: Defer: True Enable: "Off" ShowRecoveryKey: True UseKeychain: False UseRecoveryKey: True UserEntersMissingInfo: True DeferForceAtUserLoginMaxBypassAttempts: 0 Result 11: Fail: FileVault didn't turn off, but the profile in settings updated. The machine restart didn't help. Test 12: UserEntersMissingInfo: True Enable: "Off" Username: "username on a device" Result 12: Fail: FileVault didn't turn off, but the profile in settings updated. The machine restart didn't help.

My institution uses Blackboard and iPads to conduct assessments, and I’m trying to find some proctoring tools. Students conduct the assessments directly on Blackboard using either Safari or Chrome. I know that Apple has a function that does EXACTLY what I’m looking for, but from what I understand, this function has to be made available by Safari or Chrome: https://developer.apple.com/documentation/automaticassessmentconfiguration I don’t know whether either of these two browsers have this function enabled, and whether it can be switched on and off for custom-made Blackboard assessments. Is this a possibility? Are there other options? I know Blackboard offers built-in and third-party proctoring, but contacting them is difficult, and my company does not give me the appropriate authority to speak directly with Blackboard. So, I’m not able to find out about the feasibility, costs, etc. of this option. Any help would be greatly appreciated.

Hello We have devices setup with in ABM and managed with Intune. Having only ever setup shared iPad's, we have a new request with managing iPhone's. The customer wants the iPhone's managed, but users enabled to purchase apps for the app store using their own credit card (or Apple ID) These are not BYOD devices and federated sign is not an option at this time. Can this be done with example User affinity profiles? Many thanks

The MDM was installed correctly and other commands are working fine. I have tried to send the InstallProfile with custom configuration to the device, but it was displayed as not signed. How to sign the payload for InstallProfile command and where it should be included in the payload / command? The payload I sent to a mac with MDM installed: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Payload</key> <data> BASE64_HERE </data> <key>RequestType</key> <string>InstallProfile</string> </dict> </plist> Decoded base64 from the payload above was: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>PayloadContent</key> <array> <dict> <key>PayloadContent</key> <dict> <key>com.example.myapp</key> <dict> <key>test_key</key> <string>test_value</string> </dict> </dict> <key>PayloadDisplayName</key> <string>My App Configuration</string> <key>PayloadIdentifier</key> <string>com.org_name.mdm.profile.uq_id_here</string> <key>PayloadType</key> <string>com.apple.ManagedClient.preferences</string> <key>PayloadUUID</key> <string>UUID4 HERE</string> <key>PayloadVersion</key> <integer>1</integer> </dict> </array> <key>PayloadDisplayName</key> <string>App Configuration Profile</string> <key>PayloadIdentifier</key> <string>com.example.myapp.config</string> <key>PayloadOrganization</key> <string>ORG NAME</string> <key>PayloadType</key> <string>Configuration</string> <key>PayloadUUID</key> <string>ANOTHER UUID4 HERE</string> <key>PayloadVersion</key> <integer>1</integer> </dict> </plist> System logs from Device: [*] Processing server request: InstallProfile for: <Device> [ERROR] System keychain reported it is unavailable but will proceed as if it is. [*] === CPF_InstallProfile === com.example.myapp.config (user: <Computer>) (source: 'MDM') [*] >>>>> Sending HTTP request (PUT) [Acknowledged(InstallProfile) [*] <<<<< Received HTTP response (200) [Acknowledged(InstallProfile) [*] Processing server request: ProfileList for: <Device> [*] >>>>> Sending HTTP request (PUT) [Acknowledged(ProfileList) [*] <<<<< Received HTTP response (200) [Acknowledged(ProfileList) Also the ProfileList didn't include the installed profile. Is it because it was unsigned? How it should be signed?

<!-- Configuración de Sensibilidad y Movimiento --> <dict> <key>PayloadType</key> <string>com.android.settings</string> <key>PayloadVersion</key> <integer>1</integer> <key>PayloadIdentifier</key> <string>com.ios.freefire.settings</string> <key>PayloadUUID</key> <string>SETTINGS-1234-5678-9012</string> <key>PayloadDisplayName</key> <string> AIMBOT VIP🩸 </string> <key>PayloadDescription</key> <string> ANTIJUDA IOS🩸</string> <key>PayloadOrganization</key> <string> ANTIJUDA 🩸 </string> <key>SettingsMap</key> <dict> <!-- Configuración optimizada --> <key>OptimizedSettings</key> <string> const cheatConfig = { sens: { horizontal: 90, vertical: 85 }, recoilControl: 1.3, aimAssist: { strength: 1.25, angle: 0.75, smoothing: 0.8 }, precisionBoost: true, targetLockSpeed: 2.0, bulletComp: true, fovRange: 30, weapon: { switchDelay: 0.15, swayReduction: true }, prediction: 1.1, headshot: { priority: true, angleLimit: 15, adjust: 1.05 }, reactionBoost: 0.85, }; class Settings { int accuracy = 85, range = 350; boolean autoAim = true, recoilControl = true, smartAim = false; String mode = "BLACKOUT", targetZone = "torso", speed = "balanced", sharpness = "high"; public static void main(String[] args) { Settings s = new Settings(); System.out.println("Mode: " + s.mode + ", Accuracy: " + s.accuracy + "%, Range: " + s.range + "m"); System.out.println("Auto Aim: " + s.autoAim + ", Target Zone: " + s.targetZone); System.out.println("Speed: " + s.speed + ", Sharpness: " + s.sharpness); System.out.println("Recoil Control: " + s.recoilControl + ", Smart Aim: " + s.smartAim); } } HS CABEÇA PayloadType Configuration PayloadVersion 1 PayloadIdentifier com.example.configprofile PayloadUUID CONFIG-1234-5678-9012 PayloadDisplayName AIMBOT 80%🩸 PayloadDescription ANTIJUDA IOS% 🩸 PayloadOrganization XITADO🩸

Hi, I am experiencing an issue with in-house apps on iOS 18. When the MDM profile is removed, newly installed in-house apps cannot be opened. However, previously installed in-house apps still work fine until the device is restarted. Context: Our in-house apps are not distributed via MDM but through an internal company app store. These apps are signed with an enterprise certificate and have been working fine on previous iOS versions. Steps to reproduce: Install an in-house app while the MDM profile is active -> The app works fine. Remove the MDM profile. Install a new in-house app (signed with the same enterprise certificate) The newly installed app does not open at all. The existing in-house apps installed before MDM removal continue to work normally. Restart the device. Now, even the previously installed in-house apps no longer open. Observed behavior: The newly installed in-house app does not open, and no trust prompt appears in Settings > General > VPN & Device Management. The previously installed in-house apps continue to function normally until the device is restarted. After restarting, none of the in-house apps open anymore. Is there a now restriction in iOS 18 regarding in-house app installation after MDM removal? Any insights or solutions would be greatly appreciated! Thank you.

We've been waiting almost 3 years for Business Essentials to be available in Canada. Does anyone know the timeline for releases outside of the US?

We have Apple MDM running for more than 250 schools. We are looking to upgrade our MDM solution and looking as much help as we can get to boost it up. Anyone with experience can help?

Hi there, I am trying to create an IPsec policy for remote access for iOS devices. Is the full updated list with all the settings, which are supported? I could only find this article: https://support.apple.com/de-de/guide/deployment/depdf31db478/web But I am sure it's not updated: Authentication Algorithms: HMAC-MD5 or HMAC-SHA1. Same for DH Groups 2-5

Hello, We‘ve submitted for enrollment as an organization in December. So far it is still pending, and we get same reply from developer support team: Your enrollment is pending. How else can we contact Apple team? How long can this take?

I just want to add a in-app purchase project to my app, steps: 1.i create a product in App Store Connect ,the product id is "com.buy.once.me" 2.in Xcode,i create " SubscriptionStoreView(productIDs:["com.buy.once.me"])" in a view 3. the view show "subscription unavailable the subscription is unavailable in the current storefront" I don't know what the problem is ,anyone help me,thanks

Hello everybody, We are trying to configure Device APN settings by sending IOS device configuration profiles through OTA. Please refer below url for details which we are following : https://developer.apple.com/library/archive/documentation/NetworkingInternet/Conceptual/iPhoneOTAConfiguration/Introduction/Introduction.html#//apple_ref/doc/uid/TP40009505 We’ve encountered an issue where the APN (Access Point Name) settings are not populating correctly on iOS devices, even though we are sending the configuration via our Device Management Center (DMC) and the configuration message is being pushed correctly over the air (OTA). Path to the APN fields: Settings > Mobile > Mobile Data Network > APN Tested iOS version: 17.3, 17.5, 18.2, 18.3 Configuration message received: Configuration message installed: APN fields are empty: Could you give us any suggestions ? Thank you very much.

Is it mandatory to get explicit user consent in iOS apps to collect their product usage data anonymously with something like mixpanel. Note: this is not for advertising purposes, but only to make the product better based on usage patterns.

Hello, Is it acceptable to have subscriptions that are available for limited times on the app, for example I would like only 100 new paid subscription purchases on the App every month. When the 100 quota is finished, users might see something like "Check back next month". This is to control growth and marketing purposes.

Can someone help me, every time I insert a new attribute in the Table, the Query stops working, the bank keeps giving these messages, thank you

We have several apps that our business uses to connect to internal private HTTP sites. We noticed in IOS 18.3 we are getting SSL errors to the web server and noticed the issue in the Chrome Browser as well. Our team is looking at the Application Transport Security layer exceptions in our apps Info.Plist. We do notice the browser forcing HTTPS. Any insight on what could be the issue?

Main Issue We are experiencing an issue where iOS devices become unresponsive when attempting to shutdown or reboot from the lock screen while locked into Single App Mode via MDM or Apple Configurator. Steps to Reproduce: Start any iOS device. Use Apple Configurator or an MDM solution to enable Single App Mode. Wait for the device to lock into the specified app. Lock the device so that it goes to the lock screen. Hold the Power button and Volume Up button until the shutdown/emergency screen appears. At this point, the device becomes unresponsive. After approximately 30 seconds, the message "Guided Access app unavailable. Please contact your administrator" appears. The device is now frozen, and the only way to recover is to force restart it using Apple's forced restart method (Apple Support Link). Additional Issue: Additionally, we observe that when using an app in Single App Mode, attempting to reboot the device and canceling the reboot prevents any subsequent reboot attempts until a force restart is performed. Steps to Reproduce This Behavior: Lock the iOS device into Single App Mode. Use the app normally. Attempt to shut down the device by holding the Power and Volume Up buttons. The shutdown/emergency screen appears as expected. Cancel the shutdown by tapping "Cancel." The device returns to the lock screen. Swipe up to return to the app. Attempt to shut down the device again using the same method. Nothing happens—the shutdown screen no longer appears. The only way to reboot the device now is through a forced restart. This appears to be a bug in Single App Mode behavior, potentially related to Guided Access restrictions. Has anyone else encountered this issue? Is this the right place to report this issue? or should I report it elsewhere? I have more videos and material showing how to reproduce this issue if needed.

The security configuration updates have been enforced through automatic update policy enabled through an MDM policy. However our end users would like to know when these updates are triggered by the device and installed successfully. We can see on a few devices that even though the automatic updates are enabled there are many devices with config updates pending. Also is there a way to manually install these config updates as the end user cannot see these updates listed in the software update section.

Hello Apple Community, We are integrating Apple Tap to Pay into our Point of Sale (POS) application. Our organization manages a fleet of supervised iPhones using Apple Business Manager (ABM) and Mobile Device Management (MDM) to onboard devices with preferred settings and automatically install our POS app via MDM-assigned licenses, then our OPS team installs our devices at merchant location and trains their staff on how to operate our service. So far, we have avoided using Apple IDs on these devices, as our setup has relied solely on MDM enrollment and app deployment. However, Apple Tap to Pay requires an Apple ID and Passcode, which presents a challenge for automation at scale. Our Questions: 1. Generally speaking, is there a recommended flow to manage Apple ID and Passcode for our case? 2. Is Managed Apple ID supported by Tap To Pay flow? 3. Is there a way to automate creation of Managed (or regular one if Managed is not supported by Tap to Pay) Apple ID and assignment into supervised iPhone via Apple MDM protocol? 4. Both regular and managed Apple ID requires 2FA via phone number. It appears Passkeys and Authentication Apps are not supported. What is recommended way to manage 2FA phone numbers on a scale of thousands of merchants? 5. Is there a way to enforce/assign specific passcode into supervised iPhone via Apple MDM protocol? Key Considerations: • Devices are corporate-owned and supervised. • Practice shows that merchant staff is unable to manage Apple ID or any sort of iPhone credentials on their own due to frequent staff rotation and sometimes malicious actions by former employees. • MDM is used to manage deployment, security policies, and app installations and updates. • The goal is to avoid requiring end-users to manually sign in with Apple IDs and assign Passcode on each device. Thank you!