Hello everyone, I’m experiencing an issue with the Android Emulator in Android Studio (version Ladybug) on my Mac running macOS Monterey (12.7). The emulator frequently displays the message “System UI isn’t responding” and then crashes. I've tried a few troubleshooting steps, including: Restarting Android Studio and the emulator. wipe data on AVD. tried to change the emulator performance from automatic to hardware but this option isn't available to me. Despite these efforts, the problem persists. Has anyone else encountered this issue? Any suggestions or solutions would be greatly appreciated!

How I can I have both versions of the app installed on the same phone? 1 for testing and 1 that’s live to see current version users are using? I had this setup before but now TestFlight installs replace the live version instead of the test version.

Hello, Our watchOS App users on Apple Watch3 are experiencing crashes. PROBLEM only happens in production/testflight apps. app crashes immediately on launch if I build the app in Apple Watch3 device from a local machine, the app runs fine. app runs fine on an Apple Watch3 simulator What could possibly cause crashes only on Production/TestFlight while working fine on local builds? Any advice about what I could do to narrow down the cause would be greatly appreciated. THINGS I'VE TRIED Tried disabling Dead Code Stripping option in the Build Settings without any success. ENVIRONMENT Apple Watch 3, most of them on watchOS 8.8.1(19U512) our App is in SwiftUI our App's minimum supported OS version is watchOS 8.0 Thank you.

I am a developer on a project at work. I recently got a new laptop; however, since then I have been unable to build/deploy our application. I received a copy of the Developer ID Application certificate and Developer ID Installer certificate from a fellow developer. Note, everything works on their machine with these certificates. I have gone through the steps documented here https://developer.apple.com/forums/thread/712005 When I run security find-identity -p codesigning, I have two certificates that show up. one for my User and one for the Developer ID Application that my colleague gave me. Both show up as matching and valid identities. When I try to codesign "MyTrue", as documented in the link above, using "Apple Development" works; however, the "Developer ID Application" identity does not. I get a errSecInternalComponent error. ahenderson@ahendersonmacbook [17:29:23] [~/Downloads] -> % codesign -s "Apple Development" -f MyTrue -vvv MyTrue: replacing existing signature MyTrue: signed Mach-O universal (x86_64 arm64e) [MyTrue] ahenderson@ahendersonmacbook [17:30:48] [~/Downloads] -> % codesign -s "Developer ID Application" -f MyTrue -vvv MyTrue: replacing existing signature Warning: unable to build chain to self-signed root for signer "Developer ID Application: SRS Pharmacy Systems, Inc. ([REDACTED])" MyTrue: errSecInternalComponent I have downloaded all of the intermediate certificates from the apple PKI and have them installed under my keychain in login. Having spent days on this, I am at the end of my rope. Laptop Specs: M3 Pro 36GB Ram MacOS Sequoia 15.1 It is worth noting that my colleagues laptop is not running Sequoia. Not sure if that makes any difference or not. It is also worth noting, that I can run the codesign manually with the Developer ID Application using sudo (I know I shouldn't do this, but I just wanted to see if that made any difference).

Hello everyone, I've recently added a push notification extension to my React Native app to track specific notification events. The extension itself is quite lightweight, with minimal code – just enough to handle and log some event data. However, I've noticed that the overall app size has increased by around 30MB since adding this extension, which seems unusually high given the simplicity of the code. I inspected the extension's executable file, and it's showing up as 29MB, which doesn’t align with the amount of code I added. I’m wondering if this is expected behavior or if there’s something I can do to reduce the extension's size. Has anyone else encountered a similar issue or found ways to optimize extension sizes? Any guidance on reducing the size of my app post-extension would be greatly appreciated! Thank you in advance for your help!

Is there an web API I can use to get updates information, e.g. version, release date, platform?

Hi! My simulator will not build because there is essentially a package conflict. I am adding Firebase to a Flutter application. Simulator built before trying to add firebase but now I'm getting errors telling me a package can't be found even though it's installed Output Package Loading (Xcode): Missing package product 'FirebaseCore' .../ios/Runner.xcodeproj I added target 'Runner' do use_frameworks! use_modular_headers! pod 'FirebaseDatabase' pod 'FirebaseAnalytics' pod 'FirebaseMessaging' pod 'FirebaseCore' pod 'FirebaseFunctions' pod 'FirebaseAppCheck' pod 'FirebaseFirestore' pod 'FirebaseStorage' pod 'FirebaseDynamicLinks' pod 'FirebaseAuth' flutter_install_all_ios_pods File.dirname(File.realpath(__FILE__)) target 'RunnerTests' do inherit! :search_paths end end and ran pod install with no errors. Opening the runnner.xcworkspace shows all of the named packages under "Frameworks, Libraries, and Embedded Content' I've tried manually adding through Xcode those packages but then get a conflict error, so I am out of ideas as to how to fix this. It appears to be something new with the latest MacOS update as I've seen another person with the same problem that started after he updated... I've also cleaned, re-installed, re-booted a few times because My Android emulator builds fine Any help would be appreciated! Thanks!

Sometime since July 2024 the list of devices in our Enterprise Account is showing the same device and UDID 6 times. Looking at the DATE REGISTERED field it is apparent that each instance of the device represents the 'old' device that should have been 'deleted' when the annual device reset was actioned. The date registered field shows dates with 2019, 2020, 2021, and so till 2024 (most recent). I have 'disabled' two of the entries to see what happens, and those instances were disabled as expected without impacting the other instances. However, when attempting a re-enable of them, an error throws saying that they cant be enabled because that UDID already exists - obviously the other instances. For now, I have left 4 active duplicates in place, and the 2 disabled ones as they are, and plan to deal with this again - if it re-occurs in 2025. It does not seem to have impacted provisioing profiles - so will leave well enough alone. I am sure if I disable all of them, I will not be able to re-enabled any of them. Is this a know issue? Is this the best strategy? - ie, wait till device reset next year and hope issue is resolved. This post had similar issue, in 2023, but no response Forum Post 733264

After clicking the button I get an error message "An error occurred during generation. Reload this page to try again.", I tryed several times with same result. I saw in network tab the the request got 403 with error: { "errors" : [ { "id" : "a838db66-5e18-4dc8-8bb2-fc5903b41912", "status" : "403", "code" : "FORBIDDEN_ERROR.PLA_NOT_VALID", "title" : "Operation is forbidden because of PLA status.", "detail" : "" } ] } Anyone can tell me what is PLA status? Thank you

We are currently building an app in Swift, reusing an internal C++ backend used in other platforms ( Linux/Windows/Mac ). Current state of the project: App W - ( Swift App ) Package X - Swift Package Y.xcframework - Binary Target (ios-arm64 and ios-arm64-simulator) Z.framework Z - (C++ Backend as a library) Dynamic Library Headers - Library header files Frameworks (Folder) - Required .dylib’s for Z ( libA.dylib (Dependency of Z) [ 58 of them ] libB.dylib (Runtime dependency of python) [ 123 of them ] data - Supporting binary files for Z conf - Supporting configuration files, both text and binary. for Z python - Supporting .py scripts C.py D.py Z.framework ( C++ ) contains 182 Dynamic Libraries. Goal: Validate the app for distribution with the Apple Store validation tool. Learning when trying to solve the problem: A framework can contain only one dynamic library (e.g. .dylib ) A framework cannot have nested frameworks within a Frameworks folder Certain file types within a framework are not treated as resource files (e.g. .py files) Possible solutions Allow to have nested Frameworks in Z.framework. It’s currently not allowed Link 182 dynamic libraries into the project via SPM Problem: Some of the libraries need to dynamically loaded at runtime (related to the python runtime) Making the libraries static adds significantly technical challenges to the Z.framework. Other questions: What’s the best way to achieve this

Hi Guys, i have problem I cannot op a p12 file on my Mac. When I try to open the file it closes immediality like something is blocking it. I am now on Mac OS 15.1 It's for a certificate that I have to install.

Can someone please tell me if it possible to create and publish an ios app onto the app store from a windows device? If it possible then how do i do it?

It uses the SwiftJWT library. When decoding JWT, I get the error "JWT verifier failed to verify the JWT String signature". This occurs when building Release with Xcode16. It does not occur on Debug builds or Xcode15. Please tell me how to solve it

I'm tying to build and run a Maui project on Mac and keep getting the following error: I'm using JetBrains Rider and even though I have it set not to build for iOS I can't get past this error. Other possibly useful infos: OpenGL Silk.NET running on Apple Silicon cross platform project, builds and runs fine on Windows

Hi I'm building native app for SearchAds. Is it possible to use app specific password with SearchAds API or get a token using app specific password? I know its possible using JWT: https://developer.apple.com/documentation/apple_search_ads/implementing_oauth_for_the_apple_search_ads_api But using that in the app is not very user friendly even if the app will generate public and private keys.

I'm trying to build and run a Maui project but keep getting the following error: I'm using JetBrains Rider and I have it set not to build for iOS but I can't seem to get past this message. I'm using an Apple Silicon Mac, the project is cross platform, builds and runs fine on Windows. The problem seems to be with libSDL2.a. Has anyone encountered this error before? If so any suggestions on what to do about it?

Is there any way to manually adding UIDeviceFamily key inside info.plist and it updates the values inside xcode > Supported destinations section??

Hi, I need to pass the launch arguments through xcodebuild command. Is there a way to do it? I know we can edit scheme and add launch argument but it needs to be added to through command line. P.S: I'm using azure devops @Xcode5 to build and sign the .ipa xcodebuild -sdk iphoneos -configuration Debug -workspace my.xcworkspace -scheme myScheme clean CODE_SIGNING_ALLOWED=NO -launchArgument "MyLaunchArguments"

Hello all! Writing own example of using Swift/CPP interoperability. Got stacked with this error when building it: [1/2 3.8/sec] Building CXX object CMakeFiles/UsingSwiftCPPInterop_v1.dir/main.cpp.o [2/2 3.0/sec] Linking Swift executable UsingSwiftCPPInterop_v1 FAILED: UsingSwiftCPPInterop_v1 CMakeFiles/UsingSwiftCPPInterop_v1.dir/Swift/atestmodule.swift.o duplicate symbol '_main' in: ../CMakeFiles/UsingSwiftCPPInterop_v1.dir/main.cpp.o ../CMakeFiles/UsingSwiftCPPInterop_v1.dir/Swift/atestmodule.swift.o ld: 1 duplicate symbols clang: error: linker command failed with exit code 1 (use -v to see invocation) ninja: build stopped: subcommand failed. What is missing by me? The code of CMake project published here My build envieionment: CMake 3.29.3 MacOS 14.7.1 In this project Swift files linked directly to project/target. Should it be separated to library target o there must be some parameters that is telling clang to compile it without main?

大家好， 我目前正在开发一个需要使用WeatherKit的iOS应用程序。我已在我的aioutfit3.entitlements文件中添加了必要的权限，如下所示： <？xml版本="1.0"编码="UTF-8"？> <！DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist版本="1.0"> <字典> <键>com.apple.developer.weatherkit</键> <真实/> </字典> 尽管如此，当我试图获取天气数据时，该应用程序报告说它找不到授权文件，并特别提到WeatherKit授权缺失。以下是日志输出的一部分： ❌未找到权利文件 📱捆绑ID：com.superhuang.aioutfit3 ❌未找到WeatherKit权利 我已确认授权文件在Xcode项目中配置正确，并已尝试清理和重建该项目。然而，这个问题仍然存在。 有人遇到过类似的问题吗？或者有人有可能有助于解决这个问题的建议吗？非常感谢您的帮助！ 我希望这个帖子的内容能帮助你在论坛上找到解决方案。如果您需要更多信息或修改，请告诉我！ 一些图片