When creating and activating AVPictureInPictureController on iPhone 11 running iOS 18.x, the main screen viewport unexpectedly changes from the native 375×812 logical points to 414×896 points (the size of a different device such as iPhone XR/11 Plus). Additionally, a separate UIWindow with zero CGRect is created. This causes UIKit layout calculations, especially related to the keyboard and safeAreaInsets, to malfunction and results in issues like keyboard clipping and general UI misalignment. The problem appears tied specifically to iOS 18+ behavior and does not manifest on earlier iOS versions or other devices consistently. Steps to Reproduce: Run the app on iPhone 11 with iOS 18.x (including the latest minor updates). Instantiate and start an AVPictureInPictureController during app runtime. Observe that UIScreen.main.bounds changes from 375×812 (native iPhone 11 size) to 414×896. Notice a secondary UIWindow appears with frame CGRectZero. Interact with text inputs that cause the keyboard to appear. The keyboard is clipped or partially obscured, causing UI usability issues. Layout elements dependent on UIScreen.main.bounds or safeAreaInsets behave incorrectly. Expected Behavior: UIScreen.main.bounds should not dynamically change upon PiP controller creation. The coordinate space and viewport should remain accurate to device native dimensions. The keyboard and UI layout should adjust properly with respect to the actual on-screen size and safe areas. Actual Behavior: UIScreen.main.bounds changes to 414×896 upon PiP controller creation on iPhone 11 iOS 18+. A zero-rect secondary UIWindow is created, impacting layout queries. Keyboard clipping and UI layout bugs occur. The app viewport and coordinate space are inconsistent with device hardware.

When using AVSampleBufferDisplayLayer to play uncompressed H.264 and H.265 video with B-frames more than 7, frame drops occur. The more B-frames there are, the more noticeable the frame drops become, for example 15 bframes. Use FFmpeg to transcode a video file with visible timestamps and frame numbers (x264 or x265 ): ffmpeg -i test.mp4 -vf "drawtext=fontsize=45:text=%{pts} %{n}:y=400" -c:v libx264 -x264-params "bframes=15:b-adapt=0" -crf 30 -y x264_bf15.mp4 ffmpeg -i test.mp4 -vf "drawtext=fontsize=45:text=%{pts} %{n}:y=400" -c:v libx265 -x265-params "bframes=15:b-adapt=0" -crf 30 -y x265_bf15.mp4 Use the demo player from this repository to reproduce the issue: https://github.com/msfrms/CustomPlayer frame drops can be observed. And following log can be found in devices console. mediaserverd <<<< IQ-CA >>>> piqca_gmstats_dump: FIQCA(0x1266f4000) recent frames: enqueued: 184, displayed: 138, dropped: 42, flushed: 0, evicted: 3, >16ms late: 2 PS. I was using iphone11 iOS14.6, to replay this issue. May I ask why frame drops occur in this case? Is there any configuration or API usage change that could help fix the frame drop issue? Many thanks!

I am using Apple's original Lightning Digital AV-adapter (Lightning-to-HDMI dongle) to connect my iPhone to an external display via a HDMI cable. I need to synchronize rendering with the external display's refresh rate, so I create a new CADisplayLink tied to the external display's UIScreen: UIScreen.screens[externalDisplayIdx].displayLink(withTarget:, selector:). The callback is being called regularly, but with increasing delay relative to the CADisplayLink.timestamp, so the next time the callback is called, I have less and less time to draw the next frame (see the snippet below). Assuming 60 FPS, the value of secondsTillDeadline starts at an arbitrary value in the range of approx -0.0001 to 0.0166667, and then it slowly decreases towards zero (and for a brief period it goes into small negative numbers). Once it reaches zero, it flips back to 0.0166667 and continues to decrease again. This cycle repeats indefinitely. Changing the external display's resolution (UIScreen's mode) or the CADisplayLink's preferredFrameRateRange to a lower FPS does not seem to have any effect on the temporal drifting (even the rate of change seem to be the same). When I create a new CADisplayLink for the iPhone's main screen, the value of secondsTillDeadline is stable, it does not drift and it is very close to 0.0166667, as expected. Is this drift caused by the external monitor or by Apple's Lightning-to-HDMI dongle ...or is the problem somewhere else? Can the drifting be stopped? func onDisplayLinkUpdate(displayLink: CADisplayLink) { // Gradually decreases from 0.01667 to -0.0001, then flips back to 0.01667 and continues to decrease let secondsTillDeadline = displayLink.targetTimestamp - CACurrentMediaTime() }

I’m developing a macOS audio monitoring app using AVAudioEngine, and I’ve run into a critical issue on macOS 26 beta where AVFoundation fails to detect any input devices, and AVAudioEngine.start() throws the familiar error 10877. FB#: FB19024508 Strange Behavior: AVAudioEngine.inputNode shows no channels or input format on bus 0. AVAudioEngine.start() fails with -10877 (AudioUnit connection error). AVCaptureDevice.DiscoverySession returns zero audio devices. Microphone permission is granted (authorized), and the app is properly signed and sandboxed with com.apple.security.device.audio-input. However, CoreAudio HAL does detect all input/output devices: Using AudioObjectGetPropertyDataSize and AudioObjectGetPropertyData with kAudioHardwarePropertyDevices, I can enumerate 14+ devices, including AirPods, USB DACs, and BlackHole. This suggests the lower-level audio stack is functional. I have tried: Resetting CoreAudio with sudo killall coreaudiod Rebuilding and re-signing the app Clearing TCC with tccutil reset Microphone Running on Apple Silicon and testing Rosetta/native detection via sysctl.proc_translated Using a fallback mechanism that logs device info from HAL and rotates logs for submission via Feedback Assistant I have submitted logs and a reproducible test case via Feedback Assitant : FB#: FB19024508]

So, I've been wondering how fast a an offline STT -> ML Prompt -> TTS roundtrip would be. Interestingly, for many tests, the SpeechTranscriber (STT) takes the bulk of the time, compared to generating a FoundationModel response and creating the Audio using TTS. E.g. InteractionStatistics: - listeningStarted: 21:24:23 4480 2423 - timeTillFirstAboveNoiseFloor: 01.794 - timeTillLastNoiseAboveFloor: 02.383 - timeTillFirstSpeechDetected: 02.399 - timeTillTranscriptFinalized: 04.510 - timeTillFirstMLModelResponse: 04.938 - timeTillMLModelResponse: 05.379 - timeTillTTSStarted: 04.962 - timeTillTTSFinished: 11.016 - speechLength: 06.054 - timeToResponse: 02.578 - transcript: This is a test. - mlModelResponse: Sure! I'm ready to help with your test. What do you need help with? Here, between my audio input ending and the Text-2-Speech starting top play (using AVSpeechUtterance) the total response time was 2.5s. Of that time, it took the SpeechAnalyzer 2.1s to get the transcript finalized, FoundationModel only took 0.4s to respond (and TTS started playing nearly instantly). I'm already using reportingOptions: [.volatileResults, .fastResults] so it's probably as fast as possible right now? I'm just surprised the STT takes so much longer compared to the other parts (all being CoreML based, aren't they?)

Recurring crash on install of any app with the new sourceVideoTrackProvider.next() dyld[41966]: Symbol not found: _$sSo19AVAssetReaderOutputC12AVFoundationE8ProviderC4nextxSgyYaKFTjTu Referenced from: <79AA2BE0-A6B4-32F5-A804-E84BBE5D1AEA> /Users/<username>/Library/Developer/Xcode/DerivedData/TrackProviderCrash-bbbhjptcxnmfdcackxtpucnunxyc/Build/Products/Debug-maccatalyst/TrackProviderCrash.app/Contents/MacOS/TrackProviderCrash.debug.dylib Expected in: <1B847AF9-7973-3B28-95C2-09E73F6DD50B> /usr/lib/swift/libswiftAVFoundation.dylib Can be reproduced with the current Xcode Beta 4 by running on to MacCatalyst and macOS https://developer.apple.com/documentation/AVFoundation/converting-projected-video-to-apple-projected-media-profile Crash goes away of you comment out lines 154-158 and 164-170 which are while let sampleBuffer = try await sourceVideoTrackProvider.next(){/*other code*/} Can also be reproduced if you add the code below to a MacCatalyst project import AVKit let asset: AVURLAsset = .init(url: Bundle.main.url(forResource: "SomeVideo.mp4", withExtension: nil)!) let videoReader = try! AVAssetReader(asset: asset) let videoTracks = try! await asset.loadTracks(withMediaCharacteristic: .visual) // Get the side-by-side video track. let videoTrack = videoTracks.first! let videoInputTrack = AVAssetReaderTrackOutput(track: videoTrack, outputSettings: nil) let sourceVideoTrackProvider: AVAssetReaderOutput.Provider<CMReadySampleBuffer<CMSampleBuffer.DynamicContent>> = videoReader.outputProvider(for: videoInputTrack) //Comment out this while let sb = try! await sourceVideoTrackProvider.next() { }

I developed an educational app that implements audio-video communication through RTC, while using WebView to display course materials during classes. However, some users are experiencing an issue where the audio playback from WebView is very quiet. I've checked that the AVAudioSessionCategory is set by RTC to AVAudioSessionCategoryPlayAndRecord, and the AVAudioSessionCategoryOption also includes AVAudioSessionCategoryOptionMixWithOthers. What could be causing the WebView audio to be suppressed, and how can this be resolved?

Hello Apple Developer Community, I am seeking clarification on the intended display behavior of HLS audio tracks within the iOS 26 (or current beta) native player, specifically concerning the NAME and LANGUAGE attributes of the EXT-X-MEDIA tag. In our HLS manifests, we define alternative audio tracks using EXT-X-MEDIA tags, like so: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio",LANGUAGE="ja",NAME="AUDIO-1",DEFAULT=YES,AUTOSELECT=YES,URI="audio_ja.m3u8" #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio",LANGUAGE="ja",NAME="AUDIO-2",URI="audio_en.m3u8" Our observation is that when an audio track is selected and its name is displayed in the native iOS media controls (e.g., Control Center or within a full-screen video player's UI), the value specified in the NAME attribute ("AUDIO-1", "AUDIO-2") does not seem to be used. Instead, the display appears to derive from the LANGUAGE attribute ("ja", "en"), often showing the system's localized string for that language (e.g., "Japanese", "English"). We would like to understand the official or intended behavior regarding this. Is it the expected behavior for the iOS native player to prioritize the LANGUAGE attribute (or its localized equivalent) over the NAME attribute for displaying the selected audio track's label? If this is the intended design, what is the recommended best practice for developers who wish to present a custom, human-readable name for audio tracks (beyond the standard language name) in the native iOS UI? Are there any specific AVPlayer properties or AVMediaSelectionOption considerations that would allow more granular control over this display, or is this entirely managed by the system based on the LANGUAGE attribute? Any insights or official guidance on this behavior in iOS 26 (and potentially previous versions) would be greatly appreciated. Thank you for your time and assistance.

So experimenting with the new SpeechTranscriber, if I do: let transcriber = SpeechTranscriber( locale: locale, transcriptionOptions: [], reportingOptions: [.volatileResults], attributeOptions: [.audioTimeRange] ) only the final result has audio time ranges, not the volatile results. Is this a performance consideration? If there is no performance problem, it would be nice to have the option to also get speech time ranges for volatile responses. I'm not presenting the volatile text at all in the UI, I was just trying to keep statistics about the non-speech and the speech noise level, this way I can determine when the noise level falls under the noisefloor for a while. The goal here was to finalize the recording automatically, when the noise level indicate that the user has finished speaking.

i tried combine speech detector and speech transciber to anlayzer. but speech detector is not speech module. please help me

It's been well over a year since Apple added favoriting of artists back to Apple Music (the little star icon on an artist page), but yet I still haven't seen a way to get this data from an authenticated user from Music API. I was expecting to hear something about this during the WWDC, but there have been no announcements that I've caught. Has anyone else heard anything? People assume when they provide access to their Apple Music account that we can actually get to the data in their Apple Music account, and we end up looking a little dumb not being able to get this core data.

I've got a setup using AVAudioEngine with several tone generator nodes, each with a chain of processing nodes, the chains then mixed into the main output. Generator ➡️ Effect ➡️... ➡️ .mainMixerNode ➡️ .outputNode). Generator ➡️ Effect ➡️... ⤴️ ... Generator ➡️ Effect ➡️... ⤴️ The user should be able to mute any chain individually. I've found several potential approaches to muting, but not terribly happy with any of them. Adjust the amplitudes directly in my tone generators. Issue: Consumes CPU even when completely muted. 4 generators adds ~15% cpu, even when all chains are muted. Detach/attach chains that are muted/unmuted. Issue: Causes loud clicking/popping sounds whenever muted/unmuted. Fade mixer output volume while detaching/attaching a chain (just cutting the volume immediately to 0 doesn't get rid of the clicking/popping). Issue: Causes all channels to fade during the transition, so not ideal. The rest of these ideas are variations on making volume control+detatch/attach work for individual chains, since approach #3 worked well. Add an AVAudioMixer to the end of each chain (just for volume control). Issue: Only the mixer on the final chain functions -- the others block all output. Not sure what's going on there. Use matrix mixer (for multi-input volume control). Plus detach/attach to reduce CPU if necessary. Not yet attempted, due to perceived complexity and reports of fragility in order of wiring in. A bunch of effort before I even know if it's going to work. Develop my own fader node to put on the end of each channel. Unlike the tone generator (simple AVSourceNode), developing an effect node seems complex and time consuming. Might not even fix CPU use. I'm not completely averse to the learning curve of either 5 or 6, but would rather get some guidance on best approach before diving in. They both seem likely to take more effort than I'd like for the simple behavior I'm trying to achieve.

I bought two "Apple USB-C to Headphone Jack Adapters". Upon closer inspection, they seems to be of different generations: The one with product ID 0x110a on top is working fine. The one with product ID 0x110b has two issues: There is a short but loud click noise on the headphone when I connect it to the iPad. When I play audio using AVAudioPlayer the first half of a second or so is cut off. Here's how I'm playing the audio: audioPlayer = try AVAudioPlayer(contentsOf: url) audioPlayer?.delegate = self audioPlayer?.prepareToPlay() audioPlayer?.play() Is this a known issue? Am I doing something wrong?

Hello everyone, I'm working on implementing a screen sharing feature using RPSystemBroadcastPickerView and a Broadcast Upload Extension to share the entire app screen in an iOS application. The Broadcast Upload Extension is set up following Apple's ReplayKit guidelines. However, I’m encountering an issue during the broadcast startup sequence: ❗ Problem Description The Screen Broadcast UI appears as expected I tap “Start Broadcast” The countdown (3 → 2 → 1) completes Then it immediately reverts to the "Start Broadcast" screen, and screen sharing does not begin No error messages are displayed None of the extension lifecycle methods (broadcastStarted(withSetupInfo:), processSampleBuffer, etc.) are called There are no logs or crash reports, neither in the main app nor in the extension ✅ What Has Been Verified Info.plist of the Broadcast Upload Extension includes: NSExtensionPointIdentifier = com.apple.broadcast-services-upload NSExtensionPrincipalClass set correctly RPBroadcastProcessMode = RPBroadcastProcessModeSampleBuffer preferredExtension is set properly to the extension’s bundle identifier Extension is listed in the main app's build settings under "Frameworks, Libraries, and Embedded Content" ⚠️ Additional Concern We noticed that in Xcode (latest version), the Broadcast Upload Extension is listed under "Embedded Frameworks" with the setting "Embed Without Signing", and there is no option to change it to "Embed & Sign". We're wondering if this could be the reason the extension fails to launch correctly at runtime, despite being detected by the broadcast picker. ❓ Questions Has anyone faced similar issues where the broadcast never starts despite correct setup? Could the "Embed Without Signing" be causing the system to silently cancel or ignore the extension at runtime? Are there any provisioning profile or entitlement requirements specific to Broadcast Upload Extensions that might trigger this behavior silently? Any insights, suggestions, or workarounds would be greatly appreciated. Thank you in advance!

The documentation for the Apple Music API indicates that the genreNames field for a given artist (see https://developer.apple.com/documentation/applemusicapi/artists/attributes-data.dictionary) is an array of strings. However, it only appears as though you return ONE SINGLE GENRE per Artist, regardless of how many genres might be attached to that artist's albums. Am I missing something? Is there an artist where multiple genres may be returned, or is this a bug in the documentation?

I'm streaming mp3 audio data using URLSession/AudioFileStream/AVAudioConverter and getting occasional silent buffers and glitches (little bleeps and whoops as opposed to clicks). The issues are present in an offline test, so this isn't an issue of underruns. Doing some buffering on the input coming from the URLSession (URLSessionDataTask) reduces the glitches/silent buffers to rather infrequent, but they do still happen occasionally. var bufferedData = Data() func parseBytes(data: Data) { bufferedData.append(data) // ***: this buffering reduces glitching // to rather infrequent. But why? if bufferedData.count > 32768 { bufferedData.withUnsafeBytes { (bytes: UnsafeRawBufferPointer) in guard let baseAddress = bytes.baseAddress else { return } let result = AudioFileStreamParseBytes(audioStream!, UInt32(bufferedData.count), baseAddress, []) if result != noErr { print("❌ error parsing stream: \(result)") } } bufferedData = Data() } } No errors are returned by AudioFileStream or AVAudioConverter. func handlePackets(data: Data, packetDescriptions: [AudioStreamPacketDescription]) { guard let audioConverter else { return } var maxPacketSize: UInt32 = 0 for packetDescription in packetDescriptions { maxPacketSize = max(maxPacketSize, packetDescription.mDataByteSize) if packetDescription.mDataByteSize == 0 { print("EMPTY PACKET") } if Int(packetDescription.mStartOffset) + Int(packetDescription.mDataByteSize) > data.count { print("❌ Invalid packet: offset \(packetDescription.mStartOffset) + size \(packetDescription.mDataByteSize) > data.count \(data.count)") } } let bufferIn = AVAudioCompressedBuffer(format: inFormat!, packetCapacity: AVAudioPacketCount(packetDescriptions.count), maximumPacketSize: Int(maxPacketSize)) bufferIn.byteLength = UInt32(data.count) for i in 0 ..< Int(packetDescriptions.count) { bufferIn.packetDescriptions![i] = packetDescriptions[i] } bufferIn.packetCount = AVAudioPacketCount(packetDescriptions.count) _ = data.withUnsafeBytes { ptr in memcpy(bufferIn.data, ptr.baseAddress, data.count) } if verbose { print("handlePackets: \(data.count) bytes") } // Setup input provider closure var inputProvided = false let inputBlock: AVAudioConverterInputBlock = { packetCount, statusPtr in if !inputProvided { inputProvided = true statusPtr.pointee = .haveData return bufferIn } else { statusPtr.pointee = .noDataNow return nil } } // Loop until converter runs dry or is done while true { let bufferOut = AVAudioPCMBuffer(pcmFormat: outFormat, frameCapacity: 4096)! bufferOut.frameLength = 0 var error: NSError? let status = audioConverter.convert(to: bufferOut, error: &error, withInputFrom: inputBlock) switch status { case .haveData: if verbose { print("✅ convert returned haveData: \(bufferOut.frameLength) frames") } if bufferOut.frameLength > 0 { if bufferOut.isSilent { print("(haveData) SILENT BUFFER at frame \(totalFrames), pending: \(pendingFrames), inputPackets=\(bufferIn.packetCount), outputFrames=\(bufferOut.frameLength)") } outBuffers.append(bufferOut) totalFrames += Int(bufferOut.frameLength) } case .inputRanDry: if verbose { print("🔁 convert returned inputRanDry: \(bufferOut.frameLength) frames") } if bufferOut.frameLength > 0 { if bufferOut.isSilent { print("(inputRanDry) SILENT BUFFER at frame \(totalFrames), pending: \(pendingFrames), inputPackets=\(bufferIn.packetCount), outputFrames=\(bufferOut.frameLength)") } outBuffers.append(bufferOut) totalFrames += Int(bufferOut.frameLength) } return // wait for next handlePackets case .endOfStream: if verbose { print("✅ convert returned endOfStream") } return case .error: if verbose { print("❌ convert returned error") } if let error = error { print("error converting: \(error.localizedDescription)") } return @unknown default: fatalError() } } }

Hi Apple Music API / MusicKit / MediaPlayer Team, Similar to the currentPlaybackRate keeps the same pitch, it would be great to have a currentPlaybackPitch parameter as well. Alternatively, adding a preservesPitch parameter would also work. I see that iOS 26 AutoMix on Apple Music currently does pitch shifting during music transitions, so maybe this is something that could be exposed on the later betas of iOS 26? Main feature request we get is to have simple pitch changes to Apple Music we play through our app. Is this being considered?

Hello, I have an existing AUv3 instrument plugin. In the plug in, users can access files (audio files, song projects) via a UIDocumentPickerViewController In Logic Pro, (and some other hosts, but not all), the document picker is unable to receive touches, while a keyboard case is attached to the iPad. Removing the case (this is an Apple brand iPad case) allows the interactions to resume and allows me to pick files in the usual way. One of my users reports this non-responsive behavior occurs even after disconnecting their keyboard. I have fiddled with entitlements all day, and have determined that is not the issue, since the keyboard disconnection appears to fix it every time for me. Here is my, very boilerplate, presentation code : guard let type = UTType("com.my.type") else { return } let fileBrowser = UIDocumentPickerViewController(forOpeningContentTypes: [type]) fileBrowser.overrideUserInterfaceStyle = .dark fileBrowser.delegate = self fileBrowser.directoryURL = myFileFolderURL() self.present(fileBrowser, animated: true) {

Hi all, I'm working on an audio visualizer app that plays files from the user's music library utilizing MediaPlayer and AVAudioEngine. I'm working on getting the music library functionality working before the visualizer aspect. After setting up the engine for file playback, my app inexplicably crashes with an EXC_BREAKPOINT with code = 1. Usually this means I'm unwrapping a nil value, but I think I'm handling the optionals correctly with guard statements. I'm not able to pinpoint where it's crashing. I think it's either in the play function or the setupAudioEngine function. I removed the processAudioBuffer function and my code still crashes the same way, so it's not that. The device that I'm testing this on is running iOS 26 beta 3, although my app is designed for iOS 18 and above. After commenting out code, it seems that the app crashes at the scheduleFile call in the play function, but I'm not fully sure. Here is the setupAudioEngine function: private func setupAudioEngine() { do { try AVAudioSession.sharedInstance().setCategory(.playback, mode: .default) try AVAudioSession.sharedInstance().setActive(true) } catch { print("Audio session error: \(error)") } engine.attach(playerNode) engine.attach(analyzer) engine.connect(playerNode, to: analyzer, format: nil) engine.connect(analyzer, to: engine.mainMixerNode, format: nil) analyzer.installTap(onBus: 0, bufferSize: 1024, format: nil) { [weak self] buffer, _ in self?.processAudioBuffer(buffer) } } Here is the play function: func play(_ mediaItem: MPMediaItem) { guard let assetURL = mediaItem.assetURL else { print("No asset URL for media item") return } stop() do { audioFile = try AVAudioFile(forReading: assetURL) guard let audioFile else { print("Failed to create audio file") return } duration = Double(audioFile.length) / audioFile.fileFormat.sampleRate if !engine.isRunning { try engine.start() } playerNode.scheduleFile(audioFile, at: nil) playerNode.play() DispatchQueue.main.async { [weak self] in self?.isPlaying = true self?.startDisplayLink() } } catch { print("Error playing audio: \(error)") DispatchQueue.main.async { [weak self] in self?.isPlaying = false self?.stopDisplayLink() } } } Here is a link to my test project if you want to try it out for yourself: https://github.com/aabagdi/VisualMan-example Thanks!

When multiple identical songs are added to a playlist, Playlist.Entry.id uses a suffix-based identifier (e.g. songID_0, songID_1, etc.). Removing one entry causes others to shift, changing their .id values. This leads to diffing errors and collection view crashes in SwiftUI or UIKit when entries are updated. Steps to Reproduce: Add the same song to a playlist multiple times. Observe .id.rawValue of entries (e.g. i.SONGID_0, i.SONGID_1). Remove one entry. Fetch playlist again — note the other IDs have shifted. FB18879062