Hello, I'm an application developer related to Apple system extensions. I developed an endpoint security system extension that can run normally before the 14.x system. However, after I upgraded to 15.x, I found that when I uninstalled and reinstalled my system extension, although the system extension was installed successfully, a system warning box would pop up when I clicked enable in the Settings, indicating a failure. I conducted the following test. I reinstalled a brand-new MAC 15.x system. When I installed my applications, the system extensions could be installed successfully and enabled normally. However, when I uninstalled and reinstalled, my system extension couldn't be enabled properly and a system warning popped up as well. I tried disabling SIP and enabling System Extension Developers, but it still didn't work. When the system warning box pops up, I can see some error log information through the console application, including an error related to Failed to authorize right 'com.apple.system-extensions.admin' by client '/System/Library/ExtensionKit/Extensions/SettingsSystemExtensionController.appex' [2256] for authorization created by '/System/Library/ExtensionKit/Extensions/SettingsSystemExtensionController.appex' [2256] (3,0) (-60005) (engine 179) as shown in the screenshot. The same problem, mentioned in Cannot approve some extensions in MacOS Sequoia , but there is no solution

I’m implementing passkey registration and authentication in an iOS 17 app with a credential provider extension, but I’m running into an issue. Setup: I have a credential provider target configured. The app correctly shows the pop-up to register the passkey with my app. My Info.plist is set up properly. Issue: When the following function is triggered: override func prepareInterface(forPasskeyRegistration registrationRequest: ASCredentialRequest) { "code to generate registrationRequest..." let controller = ASAuthorizationController(authorizationRequests: [registrationRequest]) controller.delegate = self controller.presentationContextProvider = self controller.performRequests() } I get the following error: Domain=com.apple.AuthenticationServices.AuthorizationError Code=1004 I do not own the relying party domain (e.g., https://webauthn.io), so I cannot configure an apple-app-site-association file on the website. Question: How can I register and authenticate passkeys on any site that allows passkeys (such as webauthn.io) when I don’t control the webpage? Are there any workarounds or best practices for handling this in iOS 17? Any insights would be greatly appreciated!

Hello. I have issue with implementing "Sign in with Apple" on my website. As folow, I have created: App ID identifier: com.livnobus.app (G2F5N5UHYZ) Service ID identifier: com.livnobus.client (B25ZN8P84U) with option enabled "Sign in with Apple" and configuration (Primary App ID and Webiste URLs) Key ID: 43N8XKUW7S with option enabled "Sign in with Apple" and configuration (Primary App ID and Grouped App Ids) When I click "Sign in with Apple" on my website (https://dev.livnobus.com/auth/login), system redirect me to https://appleid.apple.com/ and error show "invalid_client". Redirect URL on my web site is: https://appleid.apple.com/auth/authorize?client_id=com.livnobus.client&redirect_uri=https%3A%2F%2Fdev.livnobus.com%2Fauth%2Fapple%2Fcallback&scope=name%20email&response_type=code&response_mode=form_post&state=eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO&nonce=e7c7a242-1977-47ea-9013-98820c24bfba.eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO There was old Service ID identifier com.livnobus.app-client, for which I lost private KEY, so I have created new one: com.livnobus.client With old Service ID com.livnobus.app-client, https://appleid.apple.com/ shows me Apple form for sign in, but with new Service ID com.livnobus.client there is error "invalid_client" https://appleid.apple.com/auth/authorize?client_id=com.livnobus.app-client&redirect_uri=https%3A%2F%2Fdev.livnobus.com%2Fauth%2Fapple%2Fcallback&scope=name%20email&response_type=code&response_mode=form_post&state=eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO&nonce=e7c7a242-1977-47ea-9013-98820c24bfba.eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO These changes I have made last Friday, and since then I can't use "Sign in with Apple" on my website. Thanks!

We are developing an app that uses Authentication Services to authenticate users. According to the documentation, this framework will open the default web browser if it supports auth session handling, and Safari otherwise. This is not entirely true, and users will be frustrated! macOS version: Sequoia 15.5; Safari version: 18.5. When: The default browser is not Safari, and supports auth session handling (Google Chrome and Microsoft Edge as examples); and - The Safari app is already running; The auth flow will: Present the confirmation dialog box with the default browser icon. Good! Open a Safari window, instead of the default browser's one. Bad! Respond with "User Cancelled" error to the app, after making the end user believe the auth was good. Very Bad!! If the app retries the auth session, the default browser window will open as expected, and it will work as expected. However, requiring users to authenticate twice is a very bad users experience... This issue does not reproduce, when either: Safari is not running at the moment of auth session start; The default browser does not support auth session handling; or - Safari is the default browser. Fellow developers, be warned! Apple engineers, feedback #18426939 is waiting for you. Cheers!

We have a crash on DCDevice.current.isSupported We want to try to make a serial queue to generate tokens but the side effect would be the same token would be used on multiple server API requests that are made within a few ms of each other? Is this safe or will the Apple server immediately reject the same token being reused? Can you share how long tokens are safe to use for? Here is the code we want to try final actor DeviceTokenController: NSObject { static var shared: DeviceTokenController = .init() private var tokenGenerationTask: Task<Data?, Never>? var ephemeralDeviceToken: Data? { get async { // Re-using the token for short periods of time if let existingTask = tokenGenerationTask { return await existingTask.value } let task = Task<Data?, Never> { guard DCDevice.current.isSupported else { return nil } do { return try await DCDevice.current.generateToken() } catch { Log("Failed to generate ephemeral device token", error) return nil } } tokenGenerationTask = task let result = await task.value tokenGenerationTask = nil return result } } }

Dear Apple Developer Support, We are currently encountering a recurring issue with the DeviceCheck API across multiple devices in our production environment. The following error is frequently returned: com.apple.devicecheck.error 0 We would like to ask the following: What are the possible underlying causes that could lead to this specific error code (0) in the DeviceCheck API? Is there any known behavior or condition where Wi-Fi network configurations (e.g., DNS filtering, proxy settings, captive portals) could result in this error? Are there known timeouts, connectivity expectations, or TLS-level requirements that the DeviceCheck API enforces which could fail silently under certain network conditions? Is this error ever triggered locally (e.g., client library-level issues) or is it always from a failed communication with Apple’s servers? Any technical clarification, documentation, or internal insight into this error code would be greatly appreciated. This would help us significantly narrow down root causes and better support our users

Hello, I’m planning to develop a custom referral-based attribution system for my app. The goal is to log the number of installs that come from unique referral links and then track subsequent in‑app analytics (for example, when a user reaches level 5 in a game). I’d also like to capture the user’s country to further segment these analytics. I want to build this system myself—without relying on third‑party services (such as AppsFlyer or Branch) since I only need a few key data points and want to keep costs low. However, I’m aware of the privacy restrictions in iOS and want to ensure that my implementation complies with Apple’s guidelines. Specifically, I would appreciate guidance on the following: Permissible Signals: Is it acceptable to log signals like IP address (or a suitably anonymized version), device model, and timestamp to help correlate the referral click to a successful install and subsequent in‑app events? Are there any other recommended non‑PII signals that can be used to confirm a referral install without risking rejection during App Review? Best Practices: What are the best practices for handling and transmitting these signals (e.g., should IP addresses be truncated or hashed)? How can I ensure that my system remains compliant with Apple’s App Tracking Transparency and other privacy guidelines? I’d appreciate any insights or references to relevant documentation that might help me build this system without getting rejected by Apple. Thank you in advance for your assistance!

We are working on a PoC iOS App to use "Sign in with Apple" on iOS. The app needs to authenticate the current user on MDM managed corporate iPads (with Shared iPad enabled) and each user having a Managed Apple ID (created in Apple Business Manager). We have started with Apple's example app: https://developer.apple.com/documentation/authenticationservices/implementing-user-authentication-with-sign-in-with-apple When we run it on a normal iPad (without MDM supervision) it works fine. When we run the same code on a managed iPad with Shared iPad enabled and Managed Apple ID's the app errors out when a user taps the "Sign in with Apple" button. A User-facing error message is displayed: “Your Apple Account cannot be used to create accounts for other apps.” And when we run the app from Xcode we see the following logs: Authorization failed: Error Domain=AKAuthenticationError Code=-7027 "(null)" UserInfo={AKClientBundleID=com.sampleapp.test2} LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Attempt to map database failed: permission was denied. This attempt will not be retried. Failed to initialize client context with error Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Failed to get application extension record: Error Domain=NSOSStatusErrorDomain Code=-54 "(null)" ASAuthorizationController credential request failed with error: Error Domain=com.apple.AuthenticationServices.AuthorizationError Code=1000 "(null)" Could not authenticate: The operation couldn’t be completed. (com.apple.AuthenticationServices.AuthorizationError error 1000.) We have confirmed that in ABM "Sign in with Apple" feature is enabled with "Allowed apps": "All apps". We have also confirmed that the Managed AppleIDs created in ABM have no field to provide the birthday of the user and therefore ruling out age restrictions for "Sign in with Apple". Is "Sign in with Apple" supported in MDM managed iPADs with Shared iPad enabled and managed AppleIDs? If it is supported, do we know what other configurations we need to get it to work? Do we know why "Sign in with Apple" would error out with Authorization failed: Error Domain=AKAuthenticationError Code=-7027 "(null)" UserInfo={AKClientBundleID=com.sampleapp.test2} LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, Environment: • iPadOS version: IPadOS Version 18.7 • Xcode version: Version 26.0 (17A324) • Device type: iPad Air 11-inch (M3) in Shared iPad mode • Account type: Managed Apple ID created in ABM enrolled with Intune MDM) Thank you

Hey everyone, I'm hitting a really frustrating issue with App Attest. My app was working perfectly with DCAppAttestService on October 12th, but starting October 13th it started failing with DCError Code 2 "Failed to fetch App UUID" at DCAppAttestController.m:153. The weird part is I didn't change any code - same implementation, same device, same everything. I've tried switching between development and production entitlement modes, re-registered my device in the Developer Portal, created fresh provisioning profiles with App Attest capability, and verified that my App ID has App Attest enabled. DCAppAttestService.isSupported returns true, so the device supports it. Has anyone else run into this? This is blocking my production launch and I'm not sure if it's something on my end or an Apple infrastructure issue.

Hello I have a problem with provisionprofile file. I have created Identifier with Sign in with Apple capability turned on, created Profile with Developer ID selected and now I try to export archive with generated Developer ID provision file but it says "Profile doesn't support Sign in with Apple" Also interesting thing that default provisions like macOS App Development Mac App Store Connect don't show such error when I try to export archive Maybe this problem is only related to Developer ID provision and Direct Distribution doesn't support Sign in with Apple, but I havent found proves about this idea

Hello, I’m storing some values in the Keychain with the attribute ‘ksecattraccessibleafterfirstunlockthisdeviceonly’ (https://developer.apple.com/documentation/security/ksecattraccessibleafterfirstunlockthisdeviceonly). When I migrate user data between iPhones via iCloud, this behaves as expected and the keys are not preserved. However, when I migrate using a direct connection between two devices, the keys are preserved, which seems to contradict the attribute’s intent. Is this a known behavior, and if so, is there a workaround?

Hi. We are writing to report a critical issue we've encountered following the recent release of iOS 26 beta 6. After updating our test devices, we discovered that our application is no longer able to establish HTTPS connections to several of our managed FQDNs. This issue was not present in beta 5 and appears to be a direct result of changes introduced in beta 6. The specific FQDNs that are currently unreachable are: d.socdm.com i.socdm.com tg.scodm.com We have reviewed the official iOS & iPadOS 26 Beta 6 Release Notes, particularly the updates related to TLS. While the notes mention changes, we have confirmed that our servers for all affected FQDNs support TLS 1.2, so we believe they should still be compliant. We have also investigated several of Apple's support documents regarding TLS connection requirements (e.g., HT214774, HT214041), but the information does not seem to apply to our situation, and we are currently unable to identify the root cause of this connection failure. https://support.apple.com/en-us/102028 https://support.apple.com/en-us/103214 Although we hope this issue might be resolved in beta 7 or later, the official release is fast approaching, and this has become a critical concern for us. Could you please provide any advice or insight into what might be causing this issue? Any guidance on potential changes in the networking or security frameworks in beta 6 that could affect TLS connections would be greatly appreciated. We have attached the relevant code snippet that triggers the error, along with the corresponding Xcode logs, for your review. Thank you for your time and assistance. #import "ViewController.h" @interface ViewController () @end @implementation ViewController - (void)viewDidLoad { [super viewDidLoad]; NSURL *url = [NSURL URLWithString:@"https://i.socdm.com/sdk/js/adg-script-loader-b-stg.js"]; NSMutableURLRequest *req = [NSMutableURLRequest requestWithURL:url cachePolicy:NSURLRequestReloadIgnoringLocalCacheData timeoutInterval:30.0]; [self sendWithRequest:req completionHandler:^(NSData *_Nullable data, NSHTTPURLResponse *_Nonnull response, NSError *_Nullable error) { if (error){ NSLog(@"Error occurred: %@", error.localizedDescription); return; }else{ NSLog(@"Success! Status Code: %ld", (long)response.statusCode); } }]; } - (void) sendWithRequest:(NSMutableURLRequest *)request completionHandler:(void (^ _Nullable)(NSData *_Nullable data, NSHTTPURLResponse *response, NSError *_Nullable error))completionHandler { NSURLSessionConfiguration *configuration = [NSURLSessionConfiguration defaultSessionConfiguration]; NSURLSession *session = nil; session = [NSURLSession sessionWithConfiguration:configuration delegate:self delegateQueue:nil]; NSURLSessionTask *task = [session dataTaskWithRequest:request completionHandler:^(NSData *data, NSURLResponse *response, NSError *error) { [session finishTasksAndInvalidate]; NSHTTPURLResponse *httpResponse = (NSHTTPURLResponse *) response; if (error) { if (completionHandler) { completionHandler(nil, httpResponse, error); } } else { if (completionHandler) { completionHandler(data, httpResponse, nil); } } }]; [task resume]; } @end error Connection 1: default TLS Trust evaluation failed(-9807) Connection 1: TLS Trust encountered error 3:-9807 Connection 1: encountered error(3:-9807) Task <C50BB081-E1DA-40FF-A1E5-A03A2C4CB733>.<1> HTTP load failed, 0/0 bytes (error code: -1202 [3:-9807]) Task <C50BB081-E1DA-40FF-A1E5-A03A2C4CB733>.<1> finished with error [-1202] Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “i.socdm.com” which could put your confidential information at risk." UserInfo={NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, _kCFStreamErrorDomainKey=3, NSErrorPeerCertificateChainKey=( "<cert(0x10621ca00) s: *.socdm.com i: GlobalSign RSA OV SSL CA 2018>", "<cert(0x106324e00) s: GlobalSign RSA OV SSL CA 2018 i: GlobalSign>" ), NSErrorClientCertificateStateKey=0, NSErrorFailingURLKey=https://i.socdm.com/sdk/js/adg-script-loader-b-stg.js, NSErrorFailingURLStringKey=https://i.socdm.com/sdk/js/adg-script-loader-b-stg.js, NSUnderlyingError=0x1062bf960 {Error Domain=kCFErrorDomainCFNetwork Code=-1202 "(null)" UserInfo={_kCFStreamPropertySSLClientCertificateState=0, kCFStreamPropertySSLPeerTrust=<SecTrustRef: 0x10609d140>, _kCFNetworkCFStreamSSLErrorOriginalValue=-9807, _kCFStreamErrorDomainKey=3, _kCFStreamErrorCodeKey=-9807, kCFStreamPropertySSLPeerCertificates=( "<cert(0x10621ca00) s: *.socdm.com i: GlobalSign RSA OV SSL CA 2018>", "<cert(0x106324e00) s: GlobalSign RSA OV SSL CA 2018 i: GlobalSign>" )}}, _NSURLErrorRelatedURLSessionTaskErrorKey=( "LocalDataTask <C50BB081-E1DA-40FF-A1E5-A03A2C4CB733>.<1>" ), _kCFStreamErrorCodeKey=-9807, _NSURLErrorFailingURLSessionTaskErrorKey=LocalDataTask <C50BB081-E1DA-40FF-A1E5-A03A2C4CB733>.<1>, NSURLErrorFailingURLPeerTrustErrorKey=<SecTrustRef: 0x10609d140>, NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “i.socdm.com” which could put your confidential information at risk.} Error occurred: The certificate for this server is invalid. You might be connecting to a server that is pretending to be “i.socdm.com” which could put your confidential information at risk. 折りたたむ

Why can’t sandboxed mac app store apps have full disk access available in the system settings for full disk access? I discovered mac app store apps in release mode cannot access the ai auggie command line program and other command line programs like opengrep on your system. Debug builds fine. I came up with a workaround: Since I have an ssh client built in for connecting to remote servers, why not connect to ssh on the same local machine… Ask the user for their username and password in a popup. To do this, you have to enable remote login on your mac in system settings -> sharing. In addition you must grant full disk access to cli ssh in system settings: add /usr/libexec/sshd-keygen-wrapper It all works, but I don’t see the cli program in mac settings. To remove the cli program you must run a command line program to remove all full disk access support from all apps. No way to just undo ssh. So my question is, even though I got CodeFrog all working for a mac app store release, should I not do it because it’s insecure or too complicated with the system settings? Should I instead sell the app off the store like Panic Nova? Need some advice. I have not implemented in app purchases yet. Should I just have a reality check and sell the app off the store, or try for app store approval? Bummer… Maybe I’m ahead of my time, but perhaps Apple could review the source code for apps requesting full disk access and make sure there’s nothing fraudulent in them. Then, developer tools app store apps could be in the store with the user’s assurance that nothing is happening behind the scenes that is scary. From: https://blog.greenrobot.com/2025/11/10/i-have-a-decision-to-make/ Related post: https://developer.apple.com/forums/thread/806187 I submitted a code level tech support question for this. They directed me here.

We are currently trying to fix a bug when using SignIn with Apple. It appears that on some occasions we are not receiving a user's profile info (name, email) when a new account is created. After doing some investigation we believe this bug is due to the same Apple login being used as an already deleted account. ASF only appears to send profile info the very first time an Apple login is used. If that account is deleted and another is created with the same apple login we won't receive the profile info. As a result we are not in compliance with Apple's guidelines requiring that we use the provided profile info with Apple SigIn, and need to prompt users to enter it again. Is there a process in place to properly "clear" a user after their account is deleted in our system, so that the next time a user creates an account with the same Apple login, we receive their profile info again?

Hello everyone, In my application, i have implemented authentication using ASWebauthenticationSession. However, when redirecting the user to a WKWebView, no cookies are shared, causing the session to be lost and requiring the user to log in again. Is there a way to share cookies between the two? If not, what would be the best approach to set up authentication that ensures SSO when switching to a WebView ? Thank you very much for your help !

We're integrating Sign in with Apple into our iOS app using both SwiftUI and UIKit. The Apple ID login UI appears correctly on real devices, but after tapping Continue, the system immediately stops and shows code 1001. This issue happens across multiple devices and Apple ID accounts, even with no prior login history. We’ve confirmed the following: Sign in with Apple is enabled in both Developer Portal and Xcode Capabilities Automatic signing and provisioning are set correctly Device is signed into iCloud and system time is synced Performed clean build, app reinstall, and other standard debugging steps We suspect that the sign-in process may not be completing properly due to some kind of account or server-side restriction, and we’d appreciate any insights into this behavior.

Binary code is associated with the NSUserTrackingUsageDescription deleted at present, but in the revised App privacy will contain NSUserTrackingUsageDescription, I feel very confused, don't know should shouldn't solve.

Since release of 18.4. prepareInterfaceToProvideCredential .oneTimeCode case is not called and instead prepareInterfaceForUserChoosingTextToInsert() is called. That is the wrong delegate for this case and it causes confusion for the users. Also, some TOTP fields are recognised however, the key icon button is not presented above the keyboard next to TOTP suggestions. I've also tested 18.5 and it has the same issue. provideOneTimeCodeWithoutUserInteraction works just fine.

Our app uses Sign in with Apple. In recent weeks (or months), we've noticed that emails sent to @privaterelay.appleid.com addresses are not being delivered. We're not receiving any bouncebacks or error messages from the mail server, but the emails never reach the user's mailbox. We've also checked spam folders, with no luck. We have verified that our Email Sources are configured correctly in Apple Developer settings. Is there any way to debug or trace what might be happening with these messages? Thanks in advance!

I am trying to setup remote Java debugging between two machines running macOS (15.6 and 26). I am able to get the Java program to listen on a socket. However, I can connect to that socket only from the same machine, not from another machine on my local network. I use nc to test the connection. It reports Connection refused when trying to connect from the other machine. This issue sounds like it could be caused by the Java program lacking Local Network system permission. I am familiar with that issue arising when a program attempts to connect to a port on the local network. In that case, a dialog is displayed and System Settings can be used to grant Local Network permission to the client program. I don't know whether the same permission is required on the program that is receiving client requests. If it is, then I don't know how to grant that permission. There is no dialog, and System Settings does not provide any obvious way to grant permission to a program that I specify. Note that a Java application is a program run by the java command, not a bundled application. The java command contains a hard-wired Info.plist which, annoyingly, requests permission to use the microphone, but not Local Network access.