On iOS 18.x when try to create EASession we get nil, but on iOS 17.x everything works. We have app which use USB cable for connecting external accessories. Scenario is when we have fresh instal, connecting with accessory work fine, EASession is created, streams are opened. When we unplug USB, we close streams, remove any reference to session and accessory, remove accessory delegate. When plug it again, creating EASession is returning nil. Only after restarting iPhone, we can create new EASession with appropriate protocol and accessory. Every next attempt without reseting iPhone is failing. Logs from accessory is following: 00:05:51.811000 : onUSBDeviceFound(pDevice=0xffc818)) iPhone USB device already in the device list w/id=1 -> update status now[21;1H 00:05:51.830000 : setConnectionStatus(status=connected) [devId=1] state updated -> forward[21;1H Capabilities indicate HostMode possibility => role switch is triggered 00:05:52.848000 : updateDIPODeviceConnections() iPhoneUSB w/caps=5 (=CarPlay or HostMode), deviceTag=2 in Device mode -> request role switch[21;1H Role switch seems to be successful 00:05:54.914000 : setSwitching('stable') changed[21;1H 00:05:54.915000 : updateDIPODeviceConnections() iPhoneUSB w/caps=2, id=1, deviceTag=2 and native transport -> request app launch and call connectUSB[21;1H 00:05:54.967000 : ConnectiAP2(05ac:12a8, s/n='00008101000160921E90801E', writeFD='/dev/ffs/ep3', readFD='/dev/ffs/ep4', hostMode){3}[21;1H Native transport should become available but does not (the following line is not present for failed case. Taken from successful case) 00:05:24.983000 : OnDBusPropChanged_NativeTransport(): deviceId=2, started=1, iAP2iOSAppIdentifier=1, sinkEndpoint=3, sourceEndpoint=4, TransactionID=1 EAP Start event not received (trace line from success try) 00:05:25.057000 : EAPSessionStart(ctx=0x74e0b800){2} called[21;1H Is there any braking change on iOS 18 considering EASession? Also what is strange is that it works on fresh instal/restart iPhone, but not working on second attempt?

As of iOS 18.1 being released we are having issues with our users experiencing issues with our app that relies on strobing the device torch. We have narrowed this down to being caused on devices with adaptive true-tone flash and have submitted a radar: FB15787160. The issue seems to be caused by ambient light levels. If run in a dark room, the torch strobes exactly as effectively as in previous iOS versions, if run in a light room, or outdoors, or near a window, the strobe will run for ~1s and then the torch will get stuck on for half a second or so (less frequently it gets stuck off) and then it will strobe again for ~1s and this behaviour repeats indefinitely. If we go to a darker environment, and background and then foreground the app (this is required) the issue is resolved, until moving to an area with higher ambient light levels again. We have done a lot of debugging, and also discovered that turning off "Auto-Brightness" from Settings -> Accessibility -> Display & Text Size resolves the issue. We have also viewed logs from Console.app at the time of the issue occurring and it seems to be that there are quite sporadic ambient light level readings at the time at which the issue occurs. The light readings transition from ~100 Lux to ~8000 Lux at the point that the issue starts occurring (seemingly caused by the rear sensor being affected by the torch). With "Auto-Brightness" turned off, it seems these readings stay at lower levels. This is rendering the primary use case of our app essentially useless, would be great to get to the bottom of it! We can't even really detect it in-app as I believe using SensorKit is restricted to research applications and requires a review process with Apple before accessing? Edit: It's worth noting this is also affecting other apps with strobe functionality in the exact same way

Will UVC native support come for the Iphone as well? So, using external cameras with the ipad is greatly beneficial, but for the iphone, it can make it a production powerhouse! So, have there been discussions around bringing UVC support for the Iphone as well? and if so, what were your conclusions?

Hello! In our App we found out the сrash at QuickLook after users updated their iPhones up to iOS 18. Crash report: SIGABRT 0x0000000000000000 Crashed: Thread 0 libsystem_kernel.dylib __abort_with_payload + 8 1 libsystem_kernel.dylib abort_with_payload_wrapper_internal + 104 2 libsystem_kernel.dylib abort_with_payload_wrapper_internal + 0 3 libobjc.A.dylib _objc_fatalv(unsigned long long, unsigned long long, char const*, char*) + 116 4 libobjc.A.dylib _objc_fatalv(unsigned long long, unsigned long long, char const*, char*) + 0 5 libobjc.A.dylib weak_register_no_lock + 396 6 libobjc.A.dylib objc_initWeak + 440 7 UIKitCore -[UIViewController viewDidMoveToWindow:shouldAppearOrDisappear:] + 1412 8 UIKitCore -[_UIRemoteViewController viewDidMoveToWindow:shouldAppearOrDisappear:] + 396 9 UIKitCore -[UIView(Internal) _didMoveFromWindow:toWindow:] + 1180 10 UIKitCore -[_UISizeTrackingView _didMoveFromWindow:toWindow:] + 112 11 UIKitCore -[UIView(Internal) _didMoveFromWindow:toWindow:] + 712 12 UIKitCore __45-[UIView(Hierarchy) _postMovedFromSuperview:]_block_invoke + 128 13 CoreAutoLayout -[NSISEngine withBehaviors:performModifications:] + 84 14 UIKitCore -[UIView _postMovedFromSuperview:] + 512 15 UIKitCore __UIViewWasRemovedFromSuperview + 136 16 UIKitCore -[UIView(Hierarchy) removeFromSuperview] + 248 17 QuickLook -[QLToolbarController setAccessoryView:animated:] + 576 18 QuickLook __55-[QLPreviewController _presentLoadedPreviewCollection:]_block_invoke + 120 19 QuickLookUICore QLRunInMainThread + 60 20 QuickLook -[QLPreviewController _presentLoadedPreviewCollection:] + 116 21 QuickLook __48-[QLPreviewController _presentPreviewCollection]_block_invoke_2 + 68 22 QuickLook (Missing) 23 libswift_Concurrency.dylib swift::runJobInEstablishedExecutorContext(swift::Job*) + 252 After research, we found out that a crash occurs in QuickLook when a user tries to open a file with unknown mimeType - application/octet-stream. QuickLook convert that files to known type (for an example - application/pdf), but crashes for the first opening the file. Any help would be greatly appreciated!

Invalid entitlement for core nfc framework. The sdk version '18.2' and min OS version '14.0' are not compatible for the entitlement 'com.apple.developer.nfc.readersession.formats' because 'NDEF is disallowed'. Anyone knows what is the correct configuration SDK version and minimum iOS deployment target for NFC that has NDEF format?

I have a device. After pairing, it is shown as connected in the Bluetooth list of the mobile phone. Before iOS 18, I could retrieve the device through the retrieveConnectedPeripherals method, but after iOS 18, I cannot retrieve it. What is the reason? Because when the device is connected, it no longer sends broadcast packets. How can I retrieve the device?

when I go to software and update it says can’t check for updateS.

Hello. I have a problem with update check ! Say “ error to Check update” update section on my iPhone 16 pro. what Is the solution to fix?

Hello! I'm facing the following Appstore issue. There was an watchOS only app, without a companion app. In current 1.6 version the app has a companion app and it can be properly installed by new users from their iPhones or watches. Unfortunately, all old users, who have installed the app from their watches don't see a way to install the app from the Appstore (they can download the latest watchOS version though). Many things have been tried - uninstalling, installing on the watch. Looking for a purchase, removing subscription, but without luck. The Appstore shows "purchased" button instead "Get" or the cloud icon. Is this a bug in the Appstore or there is a way to recover from this edge case. Thanks, Emil

We are experiencing problems with the USB port on iPad Pro 11 inch (M4) model number MVW13NF/A. Our custom peripheral device (based on Raspberry Pi Pico + tinyUSB stack, is configured as a network adapter class and has communication with our App over UDP protocol. Our device also acts as a DHCP server, providing the IP address for iPad. The problem can be described as a “bus stall” or "bus hold" after sleep mode. To reproduce it we just send the iPad into sleep mode using a power button, the USB bus on M4 goes to the suspended state and won’t resume anymore when we wake the iPad up. The problem has occurred since the upgrade to iOS 18.2.1 and has not been observed before on the previously installed iOS 17 on the same iPad Pro M4. Also, the problem does not happen on the iPad Pro 11 inch (3rd gen with M1) model number MHW73FD/A, with the same iOS 18.2.1 installed. The problem also does not arise, if we connect our device via USB hub to the same iPad Pro M4. We have tested different versions of tinyUSB stack (either included in RPi Pico SDK or native unpatched). The problem is independent of the library version. It occurs always if our device is connected directly to the USB port of iPad Pro (M4) with iOS 18. It also stays after upgrading to the latest iOS 18.3 (beta) In the attached logs is (reduced for clarity) debug output from tinyUSB library about events on the USB bus. These logs were captured via RTT debugging output, using Segger J-Link debugger, so logging process does not affect the timings on the USB bus. There are three logs attached, for cases 1: "iPad Pro M4 + iOS18" (i.e. problematic case), 2: "iPad Pro M1 + iOS18", and 3: "iPad Pro M4 + iOS18 + external USB hub" (they are non-problematic cases). case1_usbd_log.txt case2_usbd_log.txt case3_usbd_log.txt This was already posted as feedback with id FB16366509

Hi there, I am using Core NFC and I established the connection with the card, but after sending the command 'tag.sendCommand()' I receive this message: -[NFCTagReaderSession _connectTag:error:]:748 Error Domain=NFCError Code=2 "Missing required entitlement" UserInfo={NSLocalizedDescription=Missing required entitlement}. The version of XCode I am using is 16.3, and the iPhone version is iOS 18.4 Here is my entitlements file: com.apple.developer.nfc.readersession.formats NDEF TAG And my info.plist: NFCReaderUsageDescription NFC com.apple.developer.nfc.readersession.iso7816.select-identifiers A000112233445566 Signing & Capabilities‌ has added Near Field Communication Tag Reading‌.

This is a regression since iOS 13. Is there no-one at Apple interested in fixing this? FB9856371

I am experiencing an issue with NFC scanning on my iPhone 11 after updating to iOS 18. Previously, I was able to use NFC tags without any problems. However, since the update, the NFC functionality no longer works as expected. Installed OS: iOS 18.0 (22A3354) Here are the troubleshooting steps I have already tried: Opened the Shortcuts app. Tapped on Automation. Searched for NFC. Selected Run after confirmation. Tapped NFC Tag -> Scan. Unfortunately, nothing happens at this point; the NFC scan doesn't initiate. This issue has made it difficult for me to use NFC-dependent automations and functionalities that worked seamlessly before the update. Could you please provide guidance on how to resolve this problem? Thank you for your attention and support.

There is a small probability that the Bluetooth connection will be accidentally disconnected after Bluetooth is connected. Error message: CBErrorDomain Code=6 “The connection has timed out unexpectedly.” UserInfo={NSLocalizedDescription=The connection has timed out unexpectedly.

After updating the IOS to 18 currently running 18.2 apparently the front camera stopped working on all video call apps such as FaceTime, Google and when using the camera app itself the front camera does not display when selected via the the display button. The front camera does appear to operate with Face ID however

I've noticed an issue when using an iPhone or iPad that uses a USB-C port (such as the iPhone 15 Pro or iPad Pro 12.9" 6th generation) and a USB-C to USB-C cable on ARM Macs (such as the M2 Mini). After rebooting the Mac, the iOS device is no longer recognized despite the iOS device continuing to charge. I can temporarily resolve the issue by reseating the USB-C cable, which allows the device to be recognized again by applications like Finder. However, this isn't a practical solution due to the number of M2 Minis we have (each with an attached iPhone for testing) and the Mini's frequent automatic reboots throughout the day. Using a USB-A to USB-C cable (with USB-A connected to the Mac Mini) seems to avoid this problem altogether, as the iOS device remains consistently recognized after a reboot. As the title suggests, this issue appears to be specific to ARM-based Macs. We've encountered it on both the M2 Mini and a 2021 Macbook Pro with the M1 Max chip. Interestingly, we haven't been able to reproduce this behavior on Intel-based Macs (tested on an 8,1 Mac Mini and a 2019 16" Macbook), where the iOS devices remain connected after a reboot when using a USB-C to USB-C cable. Here are some additional details: iOS Devices & Versions: iPhone 15 Pro: Issue persists on both iOS 17.1 and iOS 18.0.1 iPad Pro 12.9" (6th generation): Issue persists on both iPadOS 17.6.1 and iPadOS 18.0.1 Cables: Apple's 60W USB-C Charge Cable (USB 2.0): Issue occurs Generic/Third-party USB-C cable (USB 3): Issue occurs

Hi everyone, I’m experiencing a frustrating issue with my iPhone 14 Plus after updating to iOS 18. Ever since the update, the rear camera has become almost completely unusable, while the front camera still works fine. Here’s a breakdown of the problems: Camera app shows a black screen - When I open the Camera app and switch to the rear camera, the screen is just black with no visibility of any objects or scenes. Limited photo capability - I can only take photos using the 0.5x zoom, and even then, the results are abnormal. Every photo taken with the rear camera has a strange green light at the lower bottom, just like the one in the attached photo. Unavailable features - All rear camera features, like video, panorama, portrait, and cinematic mode, don’t work at all. It’s like the camera is only partially functional. “Clips” app works normally - Interestingly, the “Clips” app is still able to take videos with the rear camera, so it seems like the camera hardware itself is fine. This issue seems specific to the Camera app and any functions within it. I waited for two updates—iOS 18.0.1 and 18.1—hoping Apple would resolve this, but unfortunately, these updates haven’t fixed the issue. I even went to the Apple Service Centre, but since my device is out of warranty, they told me that if I want it fixed, I’d have to pay MYR905 (around USD$200+) to replace the rear camera. They diagnosed it as a hardware issue, but I can’t help but feel it’s related to the iOS 18 update, as the problem started right after updating. I’ve always taken good care of my device, so this doesn’t seem to be due to any physical damage or misuse on my part. Is anyone else experiencing something similar? Could this be a software bug in iOS 18? Any help or insights would be greatly appreciated. Thanks!

I am running the same Python script using the TensorFlow Metal module on computers with M3 and M4 GPUs. While 1 epoch takes 5 minutes on the M3 device, it takes 15 minutes on the M4 device. What could be the reason for this? Could it be that TensorFlow Metal is not yet optimized for the M4 architecture?

Hi everyone, I am seeking clarification regarding the communication capabilities between an ESP32 microcontroller and Apple's latest devices, specifically the iPhone 16 Pro Max and iPad Pro, both equipped with USB-C ports. Background: MFi Certification: Historically, establishing communication between external devices and iOS devices required MFi (Made for iPhone/iPad) certification. But I remember this being necessary in the Lightning Cable to USB era. With the introduction of USB-C ports in recent iPhone and iPad models, there is an indication that MFi certification may no longer be necessary for certain peripherals. Perhaps I'm not confident on the terminology here: https://mfi.apple.com/en/who-should-join Project Requirements: I am working on a sensor research project that necessitates the collection of low-latency time-series data from an ESP32 microcontroller, which features a USB-C port. The data needs to be transmitted to an iPhone 16 Pro Max or iPad Pro. Bluetooth communication has proven insufficient due to its limited data transfer rates (~1.2 Mbps with L2CAP). While NEHotspot could be an alternative, it restricts the iPad's internet connectivity. Therefore, establishing a direct USB-C connection between the ESP32 and the iOS device appears to be the most viable solution. Questions: MFi Certification Necessity: Is MFi certification still required for an ESP32 microcontroller to communicate with iPhone 16 Pro Max or iPad Pro via USB-C? USB-C Communication Support: Do the iPhone 16 Pro Max and iPad Pro natively support serial communication over USB-C with microcontrollers like the ESP32? If not, are there recommended protocols or interfaces to facilitate this communication? App Development Considerations: Would developing a custom iOS application be necessary to handle data transmission from the ESP32 over USB-C? If so, are there specific APIs or frameworks provided by Apple to support this functionality? Data Transfer Rates: Considering the need for high-speed data transfer, are there any limitations or considerations regarding the data transfer rates achievable through a USB-C connection between the ESP32 and iOS devices? Thank you!

I am developing a virtual Bluetooth HID keyboard device on my Win desktop that connects to my iPad over bluetooth and advertises itself as a keyboard to control the iPad. It works very well already on Android, but not on iOS. I can see in Packet Logger that it reads well as a HID device, reads the report map and HID information correctly, which data is all valid. It doesn't subscribe to the report's Client Characteristic Configuration, just silently quitting and the keyboard does not work. I can post more information if needed, but my question in short is what are the requirements for iOS to accept a HID over GATT as a keyboard peripheral. I feel like I am close.