I am trying to find clarification on something. We are seeing strange cases where customer devices seem to unenroll themselves after a period of MDM inactivity. This seems to tie into roughly when their identity certificate has expired. We can't confirm this because the device has since unenrolled. Is there any case where an Apple device will automatically unenroll if it's identity certificate has expired? This doesn't always seem to happen - I had a device respond immediately after being switched off for a year - but could this be down to some devices being DEP enrolled and others manually enrolled?

I'm currently implementing a managed app using the new AppConfig specification. I referred to Apple's official documentation: Specifying and decoding a configuration. Based on the example provided in the "Publish your configuration specification" section, I structured my application configuration plist like this: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>configuration</key> <dict> <key>account</key> <dict> <key>username</key> <string>test user</string> <key>password</key> <string>test 123</string> </dict> <key>domain</key> <string>test example.com</string> </dict> </dict> </plist> When I deployed this configuration via my MDM server, the server reported valid for the activation, configuration and asset (which is the plist), but the configuration did not reflect or apply within my app. My app was unable to retrieve these settings. After some troubleshooting, I found that removing the top-level <key>configuration</key> wrapper resolved the issue. The following plist structure successfully pushed the configuration to my app: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>account</key> <dict> <key>username</key> <string>test user</string> <key>password</key> <string>test 123</string> </dict> <key>domain</key> <string>test example.com</string> </dict> </plist> My question is: Is the inclusion of the <key>configuration</key> wrapper (as shown in the Apple documentation example) incorrect for the current AppConfig implementation? Or is this structure intended for a future release (e.g., iOS 26 or beyond) and the documentation implicitly refers to it, causing confusion for current implementation? Any clarification would be greatly appreciated! Thank you!

Hi Apple Team & Community, The new Introduction of Platform SSO during ADE Enrollment is Great And we tried implementing this. As a Rule mentioned in the Documentation Initially MDM Server should send 403 response with Response Body adhering to ErrorCodePlatformSSORequired when HTTP Header for MachineInfo request contains MDM_CAN_REQUEST_PSSO_CONFIG and set to true There are contradictory claims mentioned in Document, In Process Platform SSO Required Response it is mentioned that MDM Server should send body as JSON Object for ErrorCodePlatformSSORequired Example below >>>>> Response HTTP/1.1 403 Forbidden Content-Type: application/json Content-Length: 558 { "code": "com.apple.psso.required", "description": "MDM Server requires the user to authenticate with Identity Provider - BY MEMDM", "message": "The MDM server requires you to authenticate with your Identity Provider. Please follow the instructions provided by your organization to complete the authentication process - BY MEMDM", "details": { "Package": { "ManifestURL": "https://platform-sso-node-server.vercel.app:443/manifest" }, "ProfileURL": "https://platform-sso-node-server.vercel.app:443/profile", "AuthURL": "https://platform-sso-node-server.vercel.app:443/auth" } } But in the same Document a Sample HTTP Response was Provided but seems to be XML format as below >>>>> Response HTTP/1.1 403 Forbidden Content-Type: application/xml Content-Length: 601 <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Code</key> <string>com.apple.psso.required</string> <key>Details</key> <dict> <key>ProfileURL</key> <string>https://mdmserver.example.com/psso.mobileconfig</string> <key>Package</key> <dict> <key>ManifestURL</key> <string>https://mdmserver.example.com/psso-app.plist</string> </dict> <key>AuthURL</key> <string>https://idp.example.com/authenticate</string> </dict> </dict> </plist> From Github I assume that both Response Types are welcomed hence I tried with Both Followed in JSON Mode, I redirected the HTTP request if MachineInfo contains MDM_CAN_REQUEST_PSSO_CONFIG and set to true to https://platform-sso-node-server.vercel.app/redirectedDEPJSON Followed in XML Mode, I redirected the HTTP request if MachineInfo contains MDM_CAN_REQUEST_PSSO_CONFIG and set to true to https://platform-sso-node-server.vercel.app/redirectedDEPXML In both Response Modes OS is not proceeding after and a error Stating Enrollment with Management Server Failed , Forbidden request (403) appears Can someone kindly guide on where I missed, or is this any OS Bug in Tahoe 26?

I am checking the response of DeviceInformation Command to collect network information from iPad. On iPad(iPad Pro 11, M4) devices that use WiFi without inserting Usim or Esim, network values ​​such as CurrentMCC and ICCID are received in response to the DeviceInformation command. cf.)Even though it may be garbage value, I blurred the unique information just in case. <key>ServiceSubscriptions</key> <array> <dict> <key>CarrierSettingsVersion</key> <string>61.0</string> <key>CurrentCarrierNetwork</key> <string></string> <key>CurrentMCC</key> <string>450</string> <key>CurrentMNC</key> <string>08</string> <key>EID</key> <string>blah blah</string> <key>ICCID</key> <string>blah balh</string> <key>IMEI</key> <string>blah blah</string> <key>IsDataPreferred</key> <true/> <key>IsRoaming</key> <true/> <key>IsVoicePreferred</key> <false/> <key>Label</key> <string>Provisioning</string> <key>LabelID</key> <string>00000000-0000-0000-0000-000000000000</string> <key>PhoneNumber</key> <string></string> <key>Slot</key> <string>CTSubscriptionSlotOne</string> <key>SubscriberCarrierNetwork</key> <string>iPad</string> </dict> </array> This is a bit weird. If I collect the same information from an iPhone(iPhone 15 Pro Max) that only uses wifi and does not use Usim or Esim, it does not respond with values ​​like ICCID, CurrentMCC, etc. <key>ServiceSubscriptions</key> <array> <dict> <key>IMEI</key> <string>blah blah</string> <key>Slot</key> <string>CTSubscriptionSlotOne</string> </dict> <dict> <key>EID</key> <string>blah blah</string> <key>IMEI</key> <string>blah blah</string> <key>Slot</key> <string>CTSubscriptionSlotTwo</string> </dict> </array> I'm confused by the network information collected. Is there a reason why the collected network information of iPad and iPhone are different?

I have enrolled a macbook through ADE to Apple School Manager and register it to the MDM service. Upon sending the initial DeclarativeManagement payload, the device return the client capabilities as below: "supported-versions": [ "1.0.0" ], "supported-payloads": { "declarations": { "activations": [ "com.apple.activation.simple" ], "assets": [ "com.apple.asset.credential.acme", "com.apple.asset.credential.certificate", "com.apple.asset.credential.identity", "com.apple.asset.credential.scep", "com.apple.asset.credential.userpassword", "com.apple.asset.data", "com.apple.asset.useridentity" ], "configurations": [ "com.apple.configuration.account.caldav", "com.apple.configuration.account.carddav", "com.apple.configuration.account.exchange", "com.apple.configuration.account.google", "com.apple.configuration.account.ldap", "com.apple.configuration.account.mail", "com.apple.configuration.account.subscribed-calendar", "com.apple.configuration.legacy", "com.apple.configuration.legacy.interactive", "com.apple.configuration.management.status-subscriptions", "com.apple.configuration.management.test", "com.apple.configuration.math.settings", "com.apple.configuration.passcode.settings", "com.apple.configuration.safari.extensions.settings", "com.apple.configuration.screensharing.connection", "com.apple.configuration.screensharing.connection.group", "com.apple.configuration.security.certificate", "com.apple.configuration.security.identity", "com.apple.configuration.security.passkey.attestation" ], "management": [ "com.apple.management.organization-info", "com.apple.management.properties", "com.apple.management.server-capabilities" ] }, "status-items": [ "account.list.caldav", "account.list.carddav", "account.list.exchange", "account.list.google", "account.list.ldap", "account.list.mail.incoming", "account.list.mail.outgoing", "account.list.subscribed-calendar", "device.identifier.serial-number", "device.identifier.udid", "device.model.family", "device.model.identifier", "device.model.marketing-name", "device.model.number", "device.operating-system.build-version", "device.operating-system.family", "device.operating-system.marketing-name", "device.operating-system.supplemental.build-version", "device.operating-system.supplemental.extra-version", "device.operating-system.version", "management.client-capabilities", "management.declarations", "screensharing.connection.group.unresolved-connection", "security.certificate.list", "test.array-value", "test.boolean-value", "test.dictionary-value", "test.error-value", "test.integer-value", "test.real-value", "test.string-value" ] }, "supported-features": { } } }, com.apple.configuration.softwareupdate.enforcement.specific couldn't be found. The macbook current OS version is 15.5 and it's supervised so looking at this, I assume it should include the Software Update:Enforcement:Specific capability? https://github.com/apple/device-management/blob/release/declarative/declarations/configurations/softwareupdate.enforcement.specific.yaml When I tried sending the payload to the device anyway the valid status is unknown

It's a great platform to grow your knowledge. Apple Teacher

We’re looking for best practices to remotely update iOS apps that are deployed in Single App Mode (SAM) or Autonomous Single App Mode (ASAM), managed through MDM. Imagine a typical use case: an iPad installed as a self-service kiosk at an airport restaurant. We need to update the app periodically without: Displaying any prompts to the user Relying on the user to approve or initiate the update (since the device is unattended) Sending technicians onsite, as many devices are in remote locations MDM providers have stated, “This is how Apple handles it,” without offering a workable solution. We’re hoping someone here has experience or suggestions for: Seamless or silent app updates in SAM/ASAM Update workflows that avoid interruptions or user interaction Any proven strategies or automation options under MDM supervision Any insight or documented approaches would be greatly appreciated. Thank you!

m personal iPhone is managed by an Unauthorized and Unknown mdm management team, The profile isn’t showing up in VPN Settings and I can’t remove them from having Remote access and control over my Personal Device! I’ve SPENT MANY MONTHS TRYING TO GET SUPPORT VIA EMAILING APPLE DEVELOPER AND SPEAKING TO APPLE SUPPORT WHICH HAS BEEN EXTREMELY EXHAUSTING AND HUMILIATIN! I’ve resorted to contacting Internet crime websit, the federal trade commissio, Better business bureau and Consumer Affairs to file an online complaint against Apple for not complying with their Security and Privacy policy for consumers accounts! Because of this unauthorized and unknown mdm device management profile I don’t have COMPLETE CONTROL OVER MY OWN IPHONE! ! Unable to find a team with the given Team II 'L95TAW5KWP' to which you belong. Pleas Developer Program Support. https://developer.apple.com/support I contacted developer support via email and also tried calling but they don’t respond!

Three months ago I molded a mold program. I believe could be tweaked and tried unlined zero code. swear. anyway I would like to scale with some people if I can go to commercial area code phoned series and calls.and if I have rights. but my next moves for them. on iOS I think they should have a seri settings. where they can call seri.on settings, and it jump many codes-and navigation is hard. plus I think seri can help in settings expecially since seri settings is verbal drop. if the words fit or are similar it cues goes to but you have to hard call the switch.so there’s no hey no Sami where you setting no Sammy right I think it could skip cauldron and everything verbally either. Seri settings I think iOS should try it.

how can i generate MDM Push Certificate for my own MDM server. Please guide me on that.

Hello all, We have built our own MDM solution as we plan to support quite a few devices running iOS. Manual activation is running fine and devices are checking in. We have setup ABM with Device management service setup and linked to our MDM. We have added reseller via Apple customer number and purchased devices are showing in ABM. We have setup default management service assignment as well. When we are setting up a device it gives an error: Remote Management The configuration for your iPhone could not be downloaded from . cancelled Error in the device log is as follows: Jun 11 14:16:36 iPhone Setup(DMCUtilities)[626] : <DMCHTTPRequestor: 0x84cfd7d40> cannot accept the authentication method NSURLAuthenticationMethodClientCertificate Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Task <663D2346-4B73-4DB2-A134-B1A7DC58E70B>.<1> auth completion disp=2 cred=0x0 Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Task <663D2346-4B73-4DB2-A134-B1A7DC58E70B>.<1> summary for task failure {transaction_duration_ms=285, response_status=-1, connection=7, reused=1, reused_after_ms=0, request_start_ms=0, request_duration_ms=0, response_start_ms=0, response_duration_ms=0, request_bytes=0, request_throughput_kbps=0, response_bytes=0, response_throughput_kbps=0, cache_hit=false} Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Connection 7: TLS Client Certificates encountered error 1:89 Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Task <663D2346-4B73-4DB2-A134-B1A7DC58E70B>.<1> finished with error [-999] Error Domain=NSURLErrorDomain Code=-999 UserInfo={NSErrorFailingURLStringKey=, NSErrorFailingURLKey=, _NSURLErrorRelatedURLSessionTaskErrorKey=, _NSURLErrorFailingURLSessionTaskErrorKey=, NSLocalizedDescription=} Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Connection 7: encountered error(1:89) Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Connection 7: cleaning up Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Connection 7: summary for unused connection {protocol="http/1.1", domain_lookup_duration_ms=0, connect_duration_ms=0, secure_connection_duration_ms=0, private_relay=false, idle_duration_ms=0} Jun 11 14:16:36 iPhone Setup(DMCUtilities)[626] : <DMCHTTPRequestor: 0x84cfd7d40> failed to communicate with the MDM server. Error: NSURLError:Desc : cancelled Domain : NSURLErrorDomain Code : -999 Extra info: { NSErrorFailingURLKey = "https://mdm.domainname/enroll"; NSErrorFailingURLStringKey = "https://mdm.domainname/enroll"; "_NSURLErrorFailingURLSessionTaskErrorKey" = "LocalDataTask <663D2346-4B73-4DB2-A134-B1A7DC58E70B>.<1>"; "_NSURLErrorRelatedURLSessionTaskErrorKey" = ( "LocalDataTask <663D2346-4B73-4DB2-A134-B1A7DC58E70B>.<1>" ); }

can you make a profit with the seed program

This test setup is Jamf Pro as the MDM with Entra as the IdP. PSSO is working on Sequoia devices. Prior to Tahoe, PSSO required the following three items: An existing local account, the delivery of Company Portal, and a profile containing PSSO payload. Based on the Tahoe announcement, it looks like PSSO is now available during Setup Assistant, removing the requirement of first creating a local account. I assume this means that the requirements now as easy as deploying Company Portal and the PSSO profile during the Pre-Stage policy. I attempted this on the macOS 26 beta 1 and during Setup Assistant, with the PSSO profile delivered, Setup Assistant prompts me to login to my IdP. However, pressing Continue will result in a failure, notifying me that the application required is not available. The continue button is now inactive but a "try again" button is available. This results in the loop of trying and then failing, stating that the required application is not available. I eventually must quit Setup Assistant which exits it and drops me at the login window. The only account that is visible is the management account. A trip into DFU and an IPSW restore then follows. Am I trying this too soon? Is PSSO at Setup Assistant not yet fully supported? Is there another requirement other than delivering Company App in the prestige alongside the profile? I've enabled the beta channel in MAU but there is no newer Company Portal being offered. Any guidance here would be appreciated as this is the PSSO announcement I've been waiting for since the deprecation of Apple Enterprise Connect.

This is in reference to the feedback ticket : https://feedbackassistant.apple.com/draft/57929340, we would like to know if there are any test enterprise websites that Apple can suggest to test passkeys declaration.

I am a developer distributing an enterprise app. Recently, some users have intermittently encountered an error message on iOS 18.5 stating: "Unable to install this app because its integrity could not be verified." While the issue could not be reproduced on iPhone 15 / iOS 18.5, we have received reports that it does occur on the following devices: iPhone 14 / iOS 18.5, iPhone 14 Pro / iOS 18.5, iPhone 14 Plus / iOS 18.5, iPhone 16 Pro Max / iOS 18.5, Are there any known issues or recommended solutions regarding this behavior? Thank you in advance for your assistance.

How to test ManagedAppConfigurationProvider without MDM ? Task { /* Configuration provider task */ for await configuration in configurationProvider.configurations(MyAppConfiguration.self) { self.configuration = configuration ?? MyAppConfiguration.defaultConfiguration } } Can the existence of a configuration be simulated, e.g. by storing a mocked configuration in UserDefaults? The UserDefaults key "com.apple.configuration.managed" seems not relevant here.

I'm the IT Admin in my company. We use Microsoft Intune, which is a Mobile Device Management tool, to manage our devices and apps. I created an app protection policy, restricting the data can only be shared between the allowed apps. For example, if our user want to copy the content in Outlook for iOS to WeChat or personal memo, the action will be blocked. However, may be it's too strict, here is the scenario that we need to hadle: A user selected the content in the Outlook for iOS mail, and wanted to use the "translate" function to do translation. Before the app protection policy was deployed, he can do the translation successfully. And now, it's blocked. Therefore, we need to find a way to exempt the app "Translate" so that users can do the translation successfully. We put the value "com.apple.Translate"(this is a package ID listed in the official document of Apple) to the exemption, but it's not working. May I know what is the correct "value" for the iOS native Translate APP? I need to put this value to our app protection policy to exempt Translate app. Thank you so much.

We are going to replace our iPhone SE to iPhone 16e. The issue is that we are unable to install an in-house app on the new iPhone 16e. The app works on the iPhone SE Both phones run on the same iOS version (18.5) Has anyone else experienced the same issue? I initially thought the iPhone 16e was the successor to the iPhone SE

Hello everyone, I recently changed the phone number associated with my Apple ID (about 4 days ago), but I’m still receiving the two-factor authentication verification codes on my old number instead of the new one. Has anyone experienced this? Is there a delay on Apple’s side, or is there something else I need to do to complete the update?

Can I upload custom app onto the ABM? if yes then how can we install it into the user's devices?