I am distributing a macOS application outside the App Store using Developer ID and need to provide provisioning profiles to customers for installation during the package installation process. I have two questions: How can I package and provide the provisioning profile(s) so that the customer can install them easily during the application installation process? Are there any best practices or tools that could simplify this step? In my case, there are multiple provisioning profiles. Should I instruct the customer to install each profile individually, or is there a way to combine them and have them installed all at once? Any guidance on the best practices for this process would be greatly appreciated.

I am distributing a macOS application outside the App Store using Developer ID and need to provide provisioning profiles to customers for installation during the package installation process. I have two questions: How can I package and provide the provisioning profile(s) so that the customer can install them easily during the application installation process? Are there any best practices or tools that could simplify this step? In my case, there are multiple provisioning profiles. Should I instruct the customer to install each profile one by one, or is there a way to combine them and have them installed all at once? Any insights, resources, or recommendations would be greatly appreciated.

Hello, I'm encountering an issue when trying to build and launch a Flutter app on a physical iOS device using Android Studio. Here is the full log: `Launching lib/main.dart on （iPhone Name） in debug mode... Automatically signing iOS for device deployment using specified development team in Xcode project: （Project ID） Running Xcode build... Xcode build done. 19.7s Failed to build iOS app Could not build the precompiled application for the device. Error (Xcode): Target debug_unpack_ios failed: Exception: Failed to codesign （Project Names）/build/ios/Debug-iphoneos/Flutter.framework/Flutter with identity （identity ID）. Error launching application on （iPhone Name）.` This only happens when using Android Studio. When I build the same project using Xcode, it runs fine on the same device. Background: I accidentally deleted all Apple accounts from Xcode recently. In Keychain Access, I had three identical certificates; I deleted the older two and kept the newest one. I suspect this may be related to provisioning or code signing, but I’m not sure how to resolve it within Android Studio. Any advice or steps to fix this would be greatly appreciated. Thanks in advance!

I'm trying to setup a macOS 26 build environment in a VM (using UTM and the virtualization framework Apple provides). I have Xcode 26 installed and have logged into my Apple ID and verified that the team and other configuration looks fine in Xcode settings. When trying to build the macOS app, I see errors saying the VM's device ID has not been registered. I have confirmed that the device ID is registered both in the Provisioning portal AND the downloaded .provisionprofiles (in Library > Developer > Xcode > UserData). This problem appears on multiple targets (e.g. the main app and extensions). If I try to manually provision the app, using the Provisioning portal, I can build the product, but it will not launch because of Gatekeeper issues. Finally, signing to run locally doesn't work either. As the app launches, frameworks refuse to load because Team IDs don't match. With ad hoc provisioning, there are no Team IDs. I've come to the conclusion that this just isn't possible. Which is a shame because I need to support products with a build environment on macOS 15 and cannot move over to macOS 26 yet. I suspect many developers outside of Apple are in a similar position.

In XCode I create and export a notarized app for "direct distribution". I then create a tar file of the exported .app to distribute to my users. Until today this worked fine. Now when the users try to run the app it pops up a dialog saying "app is damaged and can't be opened. You should move it to the Trash." It is possible to ctrl-click on the app and force it to run but, I think, whether this works or not will depend on system settings and not all users have root access to modify settings. Even simply copying the .app folder from the command line will cause this error.

I created an MadOS app with xcode 16.5 with a developer id certificate. I've been trying to install a distribution certificate for over a week with several co-workers. I can add a distribution certificate to my key chain, and created a provisioning profile. I've tried every combination but none work. I put xcode in automatic signing but can only see my developer id, if I put it in manual with and without a provisioning profile but if I give the app binary, other users can't run the app because the certificate isn't working. I need support to work with me to look the developer portal and my system to figure this out.

Hello everyone. I have a simple doubt, I receive an email informing that the Apple Distribution certificate will expire. I create one new in the Developer portal with one year duration. My doubt is, I need to do something more like open again the app in Xcode, insert new certificate and build it again, send to apple and everything? Or just creating this certification is enough? Is possible to increase this certification time or auto renew? Thank you!!!

Having reviewed every document, this has been going on for nearly two months. Originally, it was thought that the problem might be related to the fact I had created the developer ID signing certificate on an intel mac, and trying to import and use it on an M1 Mac-Mini. That turned out to not be the case. Completely started over with a new account (the company changed names), requested and was granted the entitlements we needed. Create a new CSR from this new m1 machine, created a Developer ID certificate, installed the certificate on this machine. But no matter what, the codesign fails. Troubleshooting Environment: Brand new Apple Developer account and Developer ID Application certificate (generated CSR on this Mac, installed cert and private key in login keychain) macOS build/signing machine, not running codesign as root Working from Terminal app in GUI session, not via SSH/cron Keychain & Certificate Chain: Verified Developer ID Application: Fidelis Security LLC (J4WGF5B6KZ) certificate and private key are present in login keychain Verified certificate is marked as trusted and has a private key attached Developer ID Certification Authority present and trusted in System keychain (removed any extra from login) Evaluate certificate assistant shows everything is good Apple Root CA present and trusted in System keychain Set all trust settings back to System Defaults after testing with “Always Trust” No expired or duplicate Developer ID intermediates present codesign Troubleshooting: Ran: codesign --force --timestamp --options runtime --sign "Developer ID Application: Fidelis Security LLC (J4WGF5B6KZ)" ./fidelisevents Consistently received: Warning: unable to build chain to self-signed root for signer ... errSecInternalComponent Confirmed correct identity using: security find-identity -v -p codesigning (Shows my Developer ID Application cert as valid) Keychain order confirmed with security list-keychains Tried explicit --keychain argument in codesign (no change) Additional Steps Attempted: Downloaded and re-installed all relevant Apple intermediates/root certificates from https://www.apple.com/certificateauthority/ Rebooted the Mac and killed/restarted the securityd daemon Confirmed no use of sudo or root for codesigning Verified keychain is unlocked Checked that partition list grants access to codesign (set with security set-key-partition-list -S "apple:codesign:" -s -k "" ~/Library/Keychains/login.keychain-db) Attempted to codesign a copy of /usr/bin/true (same error) Ran codesign both with and without --timestamp, both on app bundle and binary Keychain Access showing: Certificate and private key present and linked Correct trust chain System keychain containing all Apple intermediates/roots No trust warnings or red Xs Downloaded the latest Apple CA and Developer ID Root certificates and installed those. None of the forum searches have helped. AI is likewise confused.

Hello Apple Developer Support, We are experiencing an issue when programmatically installing a trusted root certificate on EC2 macOS instances (ARM-based), running the latest version of macOS 14.7.5 (Build 23H527). We are using the following command as part of our automated setup process: sudo security authorizationdb write com.apple.trust-settings.admin allow sudo security add-trusted-cert -d -r trustRoot -k /Library/Keychains/System.keychain "$CERT_NAME" sudo security authorizationdb remove com.apple.trust-settings.admin This fails with the following message: SecTrustSettingsSetTrustSettings: The authorization was denied since no user interaction was possible In the past, as sugested in other posts (https://developer.apple.com/forums/thread/671582) we were able to bypass this issue by running: sudo security authorizationdb write com.apple.trust-settings.admin allow This worked successfully in prior versions, including earlier 14.x releases, and continues to work on Intel-based macOS instances. However, in macOS 14.7.5 (on ARM), this approach no longer works. We suspect this may be due to a change in how System Integrity Protection (SIP) is enforced, especially on EC2 ARM. Questions: Has Apple introduced any changes in macOS 14.7.5 that prevent modifying trust settings via security CLI on headless or non-interactive sessions? Is there an approved or documented way to install system-level trusted certificates programmatically on macOS 14.7.5 (ARM)? Are there alternatives for setting trustRoot certs in non-GUI environments, such as virtualized or cloud-hosted macOS instances? As further information we were thinking to use MDM Profiles but looks like it is also blocked Thanks

In the past it was relatively easy to download from the developer portal both the app signing and installer signing certs so that I could sign AppleScripts from Script Editor when exporting them and when building packages in Jamf Composer. I went to set that up today and it seems things have changed in the last few years since I've had to set this up. I've been unable to sort this out and would love some help. I'm looking for a tutorial on doing this that walks someone step-by-step through the process for obtaining the certs (yes, I have dev account) and setting them up in keychain and then making use of them. Thanks!

I have tried again and again to generate and install the .mobileprovision on my device for testing apps following the exact instructions. I cannot get this to work. When I tap the .mobileprovision on the device I get the error "Profile Error - This profile cannot be installed." In Xcode in the console as I try to install the profile, this is what it shows: `profiled (ManagedConfiguration) Desc : Invalid Profile US Desc: Invalid Profile Domain : MCProfileErrorDomain Code : 1000 Type : MCFatalError and then profiled Desc : Invalid Profile Sugg : Invalid Profile US Desc: Invalid Profile US Sugg: Invalid Profile Domain : MCInstallationErrorDomain Code : 4000 Type : MCFatalError ...Underlying error: NSError: Desc : Invalid Profile US Desc: Invalid Profile Domain : MCProfileErrorDomain Code : 1000 Type : MCFatalError I have been at this for days and cannot get it to work. Any help would be appreciated

Once I have built my macOS .app and signed it I run notarytool using this simple shell script: #!/bin/sh ditto -c -k --keepParent "$1.app" "$1.zip" xcrun notarytool submit "$1.zip" --keychain-profile "Notary Profile for DeepSkyStacker" --wait xcrun stapler staple $1.app rm -f $1.zip How can I export that "keychain-profile" (notary profile) so I can use it in CI/CD actions? Clearly I don't wish to expose the full invocation of xcrun notarytool store-credentials.

Error in application:didFailToRegisterForRemoteNotificationsWithError: no valid aps-environment entitlement string found for application have tried out the below commands % codesign -d --entitlements - /path/to/your.app % security cms -D -i /path/to/your.app/embedded.mobileprovision and it seems both are working fine, Im currently developing react native app with expo and firebase for notifications this works fine when im running it via installing the app from testflight, but the issue occurs when i test in testflight or while the apple team reviewing my app My entitlements file <dict> <key>aps-environment</key> <string>production</string> </dict> </plist>

Can someone tell me the applications requirements for using the secure enclave on MacOS? Does the application need to be signed with the secure-enclave entitlement in order to use it? Since this is a restricted entitlement, does my App ID need approval to use it from Apple? Currently I'm building in XCode 16 on Sequoia (15.5) using developer signing. My application is a C/C++ daemon running as plist out of /Library/LaunchDaemons. I have also built it as an application using the instructions here but this has not lead to a solution: https://developer.apple.com/documentation/xcode/signing-a-daemon-with-a-restricted-entitlement/ When I run my application from the command line via sudo signed but without the secure-enclave entitlement enabled in my entitlements file it runs. The first call to: SecAccessControlRef access = SecAccessControlCreateWithFlags( kCFAllocatorDefault, kSecAttrAccessibleWhenUnlockedThisDeviceOnly, kSecAccessControlPrivateKeyUsage, &error); succeeds without error. The call to create the key using: SecKeyRef privateKey = SecKeyCreateRandomKey(attributes, &error); then fails with error: (OSStatus error -50 - Failed to generate keypair) Here are the setup attributes (keySize = 256): CFDictionarySetValue(attributes, kSecAttrKeyType, kSecAttrKeyTypeECSECPrimeRandom); CFDictionarySetValue(attributes, kSecAttrKeySizeInBits, keySize); CFDictionarySetValue(attributes, kSecAttrLabel, keyName); CFDictionarySetValue(attributes, kSecAttrApplicationTag, keyLabel); CFDictionarySetValue(attributes, kSecAttrTokenID, kSecAttrTokenIDSecureEnclave); // Store in the Secure Enclave CFDictionarySetValue(attributes, kSecAttrKeyClass, kSecAttrKeyClassPrivate); CFDictionarySetValue(attributes, kSecAttrAccessControl, access); CFDictionarySetValue(attributes, kSecAttrIsPermanent, kCFBooleanTrue); // persist key across app restarts and reboots CFDictionarySetValue(attributes, kSecAttrCanEncrypt, kCFBooleanTrue); CFDictionarySetValue(attributes, kSecAttrCanDecrypt, kCFBooleanTrue); CFDictionarySetValue(attributes, kSecAttrAccessible, kSecAttrAccessibleWhenUnlockedThisDeviceOnly); CFDictionarySetValue(attributes, kSecReturnPersistentRef, kCFBooleanTrue); When I run the application signed and include the "com.apple.developer.secure-enclave" in my entitlements file it crashes at startup. I believe this is to be expected based on above. How do I proceed such that my application can use the secure enclave correctly?

I'm working on a build system similar to Bazel where each build action runs in a sandbox. The sandbox contains only the files that the user defined as input to ensure that the build action doesn't have any implicit dependencies. Bazel achieves this by creating a "symlink forest" to the original source files. This works, but I have observed fseventsd using significant CPU during a Bazel build, presumably because of all the symlinks that get created. Is there a way to disable file events for a directory or a volume? The "File System Events Programming Guide" in the Documentation Archive mentions placing an empty file named no_log in the .fseventsd directory at the root of the volume, but when testing on macOS 15.5 with APFS that appears to no longer work. Related, is a "symlink forest" the best way to create a sandbox like this? Or is there a different method one can use to provide a view of a subset of the files in a directory tree? I read up on the App Sandbox but that seems too coarse grained. Something like Linux's overlayfs would work well, and maybe one can achieve a similar functionality with firmlinks? Curious about folks thoughts here. Thanks in advance!

I am facing this error on every flutter project build. Although it runs ok. The error happens on the codesign command What do I need to fix ? I have validated that every *.plist file is ok using plutil -lint ERROR MESSAGE /usr/bin/codesign --force --sign MY_SHA_CODE --verbose /Users/macbookair/workspace/flutter_application_1/build/ios/Release-iphoneos/Runner.app/Frameworks/libswiftCore.dylib)` exited with status 0. The command's output was: /Users/macbookair/workspace/flutter_application_1/build/ios/Release-iphoneos/Runner.app/Frameworks/libswiftCore.dylib: a required plist file or resource is malformed Info.plist <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CFBundleDevelopmentRegion</key> <string>$(DEVELOPMENT_LANGUAGE)</string> <key>CFBundleDisplayName</key> <string>Flutter Application 1</string> <key>CFBundleExecutable</key> <string>$(EXECUTABLE_NAME)</string> <key>CFBundleIdentifier</key> <string>$(PRODUCT_BUNDLE_IDENTIFIER)</string> <key>CFBundleInfoDictionaryVersion</key> <string>6.0</string> <key>CFBundleName</key> <string>flutter_application_1</string> <key>CFBundlePackageType</key> <string>APPL</string> <key>CFBundleShortVersionString</key> <string>$(FLUTTER_BUILD_NAME)</string> <key>CFBundleSignature</key> <string>????</string> <key>CFBundleVersion</key> <string>$(FLUTTER_BUILD_NUMBER)</string> <key>LSRequiresIPhoneOS</key> <true/> <key>UILaunchStoryboardName</key> <string>LaunchScreen</string> <key>UIMainStoryboardFile</key> <string>Main</string> <key>UISupportedInterfaceOrientations</key> <array> <string>UIInterfaceOrientationPortrait</string> <string>UIInterfaceOrientationLandscapeLeft</string> <string>UIInterfaceOrientationLandscapeRight</string> </array> <key>UISupportedInterfaceOrientations~ipad</key> <array> <string>UIInterfaceOrientationPortrait</string> <string>UIInterfaceOrientationPortraitUpsideDown</string> <string>UIInterfaceOrientationLandscapeLeft</string> <string>UIInterfaceOrientationLandscapeRight</string> </array> <key>CADisableMinimumFrameDurationOnPhone</key> <true/> <key>UIApplicationSupportsIndirectInputEvents</key> <true/></dict> </plist> Please help.

My command line tool with a JIT entitlement is failing to run on Sequoia. 2025-05-26 14:17:09.758 E taskgated-helper[91764:3ab7036] [com.apple.ManagedClient:ProvisioningProfiles] Disallowing DecisionRuleTool because no eligible provisioning profiles found 2025-05-26 14:17:09.758 Df amfid[576:3ab6d6b] /Users/jim/DecisionRuleTool not valid: Error Domain=AppleMobileFileIntegrityError Code=-413 "No matching profile found" UserInfo={NSURL=file:///Users/jim/DecisionRuleTool, NSLocalizedDescription=No matching profile found} 2025-05-26 14:17:09.759 Df kernel[0:3ab7031] (AppleMobileFileIntegrity) AMFI: When validating /Users/jim/DecisionRuleTool: 2025-05-26 14:17:09.759 Df kernel[0:3ab7031] mac_vnode_check_signature: /Users/jim/DecisionRuleTool: code signature validation failed fatally: When validating /Users/jim/DecisionRuleTool: 2025-05-26 14:17:09.759 Df kernel[0:3ab7031] proc 91763: load code signature error 4 for file "DecisionRuleTool" 2025-05-26 14:17:09.759 Df kernel[0:3ab7032] (AppleSystemPolicy) ASP: Security policy would not allow process: 91763, /Users/jim/DecisionRuleTool Codesign isn't giving me any clues as to why. It validates. Asking it what the entitlements are on the binary: % codesign --display --entitlements - /Users/joconnor/MACEP-9852-2/tools/detection/DecisionRuleTool Executable=/Users/jim/DecisionRuleTool [Dict] [Key] com.apple.application-identifier [Value] [String] XXXXXXXXX.com.mycompany.drt [Key] com.apple.developer.team-identifier [Value] [String] XXXXXXXXX [Key] com.apple.security.cs.allow-jit [Value] [Bool] true https://developer.apple.com/documentation/Xcode/signing-a-daemon-with-a-restricted-entitlement This makes it look like this may be hopeless, that I can't create a command line took with proper entitlements.

Hi, overnight I'm getting "HTTP status code: 403. Invalid or inaccessible developer team ID for the provided Apple ID. Ensure the Team ID is correct and that you are a member of that team." in my pipeline running notarytool store-credentials. I'm getting --apple-id, --team-id and --password from CI variables. Double checked the values (even though they shouldn't change). Tried a new app specific password I did not change anything to cause this and my apple developer account is active. Really scratching my head what's going on here. Some assistance would be greatly appreciated!

I will post my app xyz.app uses XY swift package this swift package is a wrapper for XYSDK.xcframework XYSDK.xcframework written in c++ and app running on arm64 macos and iphones succesfully. I got this error when i want to distribute it. Currently i sign .framework for ios with Apple Distribution Certificate and same certificate for macos framework there is no other signing step for swift package or xcframework other than that when i want to archive it validates succesfully. Exporting step shows that app has signed, has provisining profile. but .framework is only signed has no provisioning profile. Also one point i see: i have one target named xyz and its Frameworks, Lİbraries and Embedded Context has only XY package but Embed part has no option like embed and sign etc. Blank. I need more info about what am i doing wrong in which step ? I am stuck and can not move any further like weeks Error Detail: Invalid Signature. The binary with bundle identifier XYSDK at path “xyz.app/Frameworks/XYSDK.framework” contains an invalid signature. Make sure you have signed your application with a distribution certificate, not an ad hoc certificate or a development certificate. Verify that the code signing settings in Xcode are correct at the target level (which override any values at the project level). Additionally, make sure the bundle you are uploading was built using a Release target in Xcode, not a Simulator target. If you are certain your code signing settings are correct, choose “Clean All” in Xcode, delete the “build” directory in the Finder, and rebuild your release target. For more information, please consult https://developer.apple.com/support/code-signing. (90035)

I have a macOS application that was previously distributed under my personal Apple Developer account using a Developer ID certificate. We’ve recently transitioned distribution to our company’s Apple Developer account. The app’s bundle identifier has been successfully transferred, and I’ve signed a new build of the app using the company’s Developer ID certificate. The app installs and runs correctly under the new signature. However, I’ve encountered a problem: the app is no longer able to access previously granted permissions (e.g., Screen Recording, System Audio Recording, and Input Monitoring). Furthermore, it cannot re-prompt for these permissions because they appear as already granted in System Settings. From what I understand, this issue is due to the change in the code signing identity. Specifically, the designated requirements used by macOS to identify an app have changed, so the system no longer associates the new version of the app with the previously granted permissions (as outlined in Apple's Technical Note TN3127). The only workaround I’ve found so far is to manually reset the app's permissions using Terminal commands (e.g., tccutil reset), but this is not something we can reasonably ask end users to do. Question: Is there a recommended or supported approach to either preserve permissions when changing Developer ID identities, or programmatically trigger a permissions reset for existing users? We're looking for a seamless solution that doesn't degrade user experience.