When using Instruments in Xcode 15.3 on macOS Sonoma 14.3.1 symbols from system frameworks are not displaying. I've tried creating a template "App" project and running it on the iOS 17.4 simulator without any code changes and still am not seeing symbols so I can be sure it's not unique to my real-world project build settings. If I install Xcode 15.0 and run the same build in the same 17.4 simulator using Instruments 15.0 it shows thread names and symbols for UIKit and other frameworks but is still missing SwiftUI symbols. Instruments 15.3 Instruments 15.0 I've spent 2 days trying to narrow down why I couldn't debug my app and even deleted all my partitions and reinstalled macOS which didn't fix the issue.

Since Xcode 15.3 it has become impossible to build our project more twice in a row without encountering a batch of "internal inconsistency error: never received target ended message for target ID …". This issues appeared a few months ago (15.0 i think, but i'm not sure), but xcode 15.3 makes it almost unusable. We're a team of 3 iOS devs, and we're all having the problem. Our project involves a lot of SPM packages, a few cocoa pods, a few iOS Frameworks, and a bit of swiftgen. Nothing particularly special for a large project, and no custom build steps that does anything fancy. It is now to the point where we're looking for alternative to xcode, because we can't decently kill xcode and restart every time we have to build our code...

I have latest version Xcode-15.1 & Mac-os version Sonoma-14.3.1 - while running particularly UITest target Xcode not launching the simulator, even after build succeed & test's completed without any errors. I tried cleaning project, re-starting Xcode, restarting system(Mac) - no luck It would be helpful if I get any suggestion on resolving the issue.

With the latest release of Xcode, my obj c++ project is now giving compile errors like this. No code has changed. Reverting to Xcode 15.2 solves this

We had Xcode Cloud working with our project. We needed to re-auth the repo which failed and ended up needing to remove the config to reset it up as new. When on AppStoreConenct it shows its now not configured and to setup, which is good but when launch Xcode, press setup Xcode cloud it just gets stuck on loading source code repositories.

We use a local swift package in 6 of our app extensions. The product from the local package that we link to each app extension is a dynamic framework. And while the dynamic framework is copied into the final app bundle once, the resource bundles of each target that comprise the dynamic framework is copied into each app extension. I'd much rather have the bundles be copied into the dynamic framework once to prevent app bloat. Here is a visualization of the issue: . └── MyApp.ipa/ ├── MyApp (executable) ├── MyDynamicFramework_TargetA.bundle ├── MyDynamicFramework_TargetB.bundle ├── MyDynamicFramework_TargetC.bundle ├── Frameworks/ │ └── MyDynamicFramework.framework/ │ ├── TargetA │ ├── TargetB │ └── TargetC └── PlugIns/ ├── Widgets.appex/ │ ├── MyDynamicFramework_TargetA.bundle │ ├── MyDynamicFramework_TargetB.bundle │ └── MyDynamicFramework_TargetC.bundle ├── Intents.appex/ │ ├── MyDynamicFramework_TargetA.bundle │ ├── MyDynamicFramework_TargetB.bundle │ └── MyDynamicFramework_TargetC.bundle ├── IntentsUI.appex/ │ ├── MyDynamicFramework_TargetA.bundle │ ├── MyDynamicFramework_TargetB.bundle │ └── MyDynamicFramework_TargetC.bundle ├── NotificationContent.appex/ │ ├── MyDynamicFramework_TargetA.bundle │ ├── MyDynamicFramework_TargetB.bundle │ └── MyDynamicFramework_TargetC.bundle ├── RichPushContent.appex/ │ ├── MyDynamicFramework_TargetA.bundle │ ├── MyDynamicFramework_TargetB.bundle │ └── MyDynamicFramework_TargetC.bundle └── NotificationService.appex/ ├── MyDynamicFramework_TargetA.bundle ├── MyDynamicFramework_TargetB.bundle └── MyDynamicFramework_TargetC.bundle Notice that the resource bundles of Target A, B, and C are copied multiple times causing an unhealthy app size. I'd either like the resource bundles to be copied into MyDynamicFramework or copied once into the app bundle and let the app extensions reference them. Given the SPM + Xcode linking is a black box for the most part, how would I accomplish this?

Hi guys, I tried to build my app using EAS but got ✖ Failed to register bundle identifier com.fitlinez.pt Received an internal server error from Apple's App Store Connect / Developer Portal servers, please try again later This request can not be processed right now - Service not available because of maintenance activities, please try again after some time. I've checked the System Status https://developer.apple.com/system-status/ and everything seems green! but the problem persists. Does anyone know how to fix it?

It's not possible to merge a framework with resource into an iOS app target because the resource are not included in the app bundle. Steps to reproduce: Create an Xcode Project with iOS App Template Add a Framework Target (make sure to "Embed in Application") Add an Asset Catalog to Framework Target Add an Color Resource (or Image Set, or any other Resource) Reference the Resource in App Target (I have used a SwiftUI View) Run on Device (!) to make sure everything works as expected Change "Create Merged Binary (MERGED_BINARY_TYPE)" build setting of app target to "Automatic (automatic)" Change app target settings to link, but not embed framework target (e.g. change from "Embed and Sign" to "Do Not Embed" in "Frameworks, Libraries and Embedded Content" section in "General" tab) Run again (on Device!) and observe how the resources framework resource cannot be found anymore (using SwiftUI you will see a "No image/color named '...' in asset catalog for ..." error message in console logs) Note: Everything works fine in Simulator Same behavior for Release and Debug configuration Same behavior for manual and automatic merging Same behavior for resources which are not bundled in Asset Catalog When archiving the app, an "Assets.car" file is never present (even when creating archiving for Simulator target, when "Allow archiving for Simulator" is enabled) Reported as FB13716505 Test Project: https://github.com/iteracticman/MergeableResources/

I'm building a Unity application for ios that also communicates with Firebase (and GDrive, if it makes a difference, as well as some other servers). When running it through Unity Build Automation with fastlane, this is what it's failing on. Help? inline-code[2024-04-10T09:53:11.680Z] - 7.4.1.2.7.4 - [0;36mINFO [0m: SwiftCompile normal arm64 Compiling\ AsyncAwait.swift,\ Result.swift,\ Storage.swift,\ StorageComponent.swift,\ StorageConstants.swift,\ StorageDeleteTask.swift,\ StorageDownloadTask.swift,\ StorageError.swift,\ StorageGetDownloadURLTask.swift,\ StorageGetMetadataTask.swift,\ StorageListResult.swift,\ StorageListTask.swift,\ StorageMetadata.swift,\ StorageObservableTask.swift,\ StoragePath.swift,\ StorageReference.swift,\ StorageTask.swift,\ StorageTaskSnapshot.swift,\ StorageTaskState.swift,\ StorageTokenAuthorizer.swift,\ StorageUpdateMetadataTask.swift,\ StorageUploadTask.swift,\ StorageUtils.swift /opt/workspace/workspace/arpalusdev.productrecognition.ios-provisioned-app/temp20240410-3408-1mgvzme/Pods/FirebaseStorage/FirebaseStorage/Sources/AsyncAwait.swift /opt/workspace/workspace/arpalusdev.productrecognition.ios-provisioned-app/temp20240410-3408-1mgvzme/Pods/FirebaseStorage/FirebaseStorage/Sources/Result.swift /opt/workspace/workspace/arpalusdev.productrecognition.ios-provisioned-app/temp20240410-3408-1mgvzme/Pods/FirebaseStorage/FirebaseStorage/Sources/Storage.swift /opt/workspace/workspace/arpalusdev.productrecognition.ios-provisioned-app/temp20240410-3408-1mgvzme/Pods/FirebaseStorage/FirebaseStorage/Sources/StorageComponent.swift /opt/workspace/workspace/arpalusdev.productrecognition.ios-provisioned-app/temp20240410-3408-1mgvzme/Pods/FirebaseStorage/FirebaseStorage/Sources/StorageConstants.swift /opt/workspace/workspace/arpalusdev.productrecognition.ios-provisioned-app/temp20240410-3408-1mgvzme/Pods/FirebaseStorage/FirebaseStorage/Sources/Internal/StorageDeleteTask.swift /opt/workspace/workspace/arpalusdev.productrecognition.ios-provisioned-app/temp20240410-3408-1mgvzme/Pods/FirebaseStorage/FirebaseStorage/Sources/StorageDownloadTask.swift /opt/workspace/workspace/arpalusdev.productrecognition.ios-provisioned-app/temp20240410-3408-1mgvzme/Pods/FirebaseStorage/FirebaseStorage/Sources/StorageError.swift /opt/workspace/workspace/arpalusdev.productrecognition.ios-provisioned-app/temp20240410-3408-1mgvzme/Pods/FirebaseStorage/FirebaseStorage/Sources/Internal/StorageGetDownloadURLTask.swift /opt/workspace/workspace/arpalusdev.productrecognition.ios-provisioned-app/temp20240410-3408-1mgvzme/Pods/FirebaseStorage/FirebaseStorage/Sources/Internal/StorageGetMetadataTask.swift /opt/workspace/workspace/arpalusdev.productrecognition.ios-provisioned-app/temp20240410-3408-1mgvzme/Pods/FirebaseStorage/F... [2024-04-10T09:53:11.680Z] - 7.4.1.2.7.4 - [0;36mINFO [0m: torageTokenAuthorizer.swift /opt/workspace/workspace/arpalusdev.productrecognition.ios-provisioned-app/temp20240410-3408-1mgvzme/Pods/FirebaseStorage/FirebaseStorage/Sources/Internal/StorageUpdateMetadataTask.swift /opt/workspace/workspace/arpalusdev.productrecognition.ios-provisioned-app/temp20240410-3408-1mgvzme/Pods/FirebaseStorage/FirebaseStorage/Sources/StorageUploadTask.swift /opt/workspace/workspace/arpalusdev.productrecognition.ios-provisioned-app/temp20240410-3408-1mgvzme/Pods/FirebaseStorage/FirebaseStorage/Sources/Internal/StorageUtils.swift (in target 'FirebaseStorage' from project 'Pods') [2024-04-10T09:53:11.680Z] - 7.4.1.2.7.4 - [0;36mINFO [0m: (2 failures)

We have been using a Supervision Identity successfully over the last few years to allow us to Xcode debug on managed devices. Something has changed in the last few months which we are finding it hard to find a consistent solution to. We can't determine whether it's Xcode 15/iOS version related. Behaviour we see documented below All Macs with the Supervision Identity installed can open the device in Apple Configurator without need for trust acknowledge on the device. Configurator can open and stream the device console. All problematic devices are also registered as a development device with Apple. We have hit and miss connectivity in Finder, On failure it indicates that the trust prompt on the device needs to be accepted. No trust prompt is displayed Developer Mode on the device can't be enabled until we attempt to connect to Xcode Devices that pair successfully in Xcode do so almost immediately. If a device pairs in Xcode it is also visible in the native macOS Console application If a device fails to pair in Xcode we get a spinner and the message "Xcode has already started pairing with 'iPhone-X'. Select Trust on iPhone-X to complete pairing". The macOS console app reports "The user has not responded to the pairing request on 'iPhone-X' In neither case is a trust prompt displayed on a device. We are not able to Xcode pair any managed device running iOS 17.x. This includes devices that were successfully paired on iOS16.x then upgraded iOS16.x devices that pair with one Mac successfully will not pair with another Mac with the same Supervision Identity installed. The same behaviour is seen on Ventura and Sonoma Macs Clearing Trusted Computers in IOS Developer Mode has no effect None supervised iOS devices pair successfully on iOS 16 and 17 Has anyone else witnessed similar issues and found a work around ?

https://developer.apple.com/documentation/xcodekit/creating_a_source_editor_extension I created new MacOS project and added a Xcode Source Editor Extension target to the project. I run the extension in debug mode with extension target, but the extension is not show up in Editor menu debug mode Xcode. Xcode version is 15.3(released) MacOS version is 14.4.1 Sonoma

We are received the following error while uploading the application into TestFlight. **ITMS-90714: Invalid binary - The app contains one or more corrupted binaries. Please rebuild the app and resubmit. ** After sometimes we submit the same application without changing the configurations application submitted successfully into the App Store. We are using the Xcode 15.3 version.

Xcode 15 introduced official support for static frameworks. docs here This is presumably because there's quite a bit over overlap with the mergeable libraries feature. Static frameworks potentially give developers a nice option for bundling resources with a static library. This was previously only really viable if you explicitly packaged up a .bundle with your .a (static library) which could be cumbersome for both the creator and consumer of a library. Or you explicitly copied your framework resources into your main app binary when building your app. The release notes for Xcode 15 state: Embedding a static framework using a Copy Files build phase now removes the static archive from the framework when it is embedded in the target bundle. When inspecting the app target on disk this appears to be the case. In fact the behaviour is the same as with a mergable in release mode whereby a "stub" binary exists with no symbols. The release notes also state: The COPY_RESOURCES_FROM_STATIC_FRAMEWORKS build setting, previously used in the legacy build system to extract and copy the resources from a static framework to the target bundle, no longer has any effect with the new build system as the entire framework is copied instead This also appears to be the case when inspecting the files on disk as the frameworks appear to be present in the main app with their resources. So far so good. The issue arises when trying to access the bundle associated with this framework. The documentation doesn't mention any special access requirements to it's assumed that standard bundle access APIs should work. Using a class let bundle = Bundle(for: InfoCoreMain.self) This returns the main application bundle and therefore fails to find the correct asset. This can be rationalised by the fact that the InfoCoreMain class does now actually exist within the main app target binary due to being statically linked. It's worth noting however, that mergable libraries in release mode do seem to work in this way and can resolve the bundle fine*. Using an explicit bundle identifier let bundle = Bundle(identifier: "***.***.InfoCore") Using an explicit bundle identifier returns nil even though we can see the framework on disk. Using a path Using a path to access the framework also doesn't work. if let bundlePath = Bundle.main.path(forResource: "InfoCore", ofType: "framework") { let bundle = Bundle(path: bundlePath) // Now you can access resources in the framework bundle } else { // Framework bundle not found } All of the above is the same behaviour for release and debug builds. I have tried this on Xcode 15.2 and 15.3 *Mergeable libraries do seem to have issues in debug mode. See this forum post. https://forums.developer.apple.com/forums/thread/749818

Using Xcode to build and deploy the app to my watch, this is what I get: “Waiting to reconnect to Apple Watch. Previous preparation error: Transport error." And then “Connecting to Apple Watch. Xcode will continue when the operation completes.” And these messages continue to switch between each other. Sometimes the watch to connect and the application starts, but more often a scenario occurs with endless reconnection. I'm using: MacOS 14.4.1 (MacBook Pro 2019; 1.4 GHz Quad-Core Intel Core i5), Xcode 15.3, Watch OS 10.2 (Apple Watch SE 1), iOS 17.1.1 (iPhone 15 Pro). Methods I tried: Connecting Macbook, iPhone and Watch to the same WIfi network; Disabling Watch (and IPhone) from the "Devices and Simulators" menu and setting up Watch (and IPhone) from the beginning. Any help?

I would like to use devicectl to take a picture of my iPhone screen on iOS 17. So far I have successfully performed, Launching and exiting the app I created. Reboot the iPhone connected via USB etc.... I used to use libimobiledevice, but when I bought a new iPhone with iOS17, I can't do it anymore.

I have enabled Code Review with the button and then String Catalog turned up to code view anyways i can't get it back to original view. Disable Code Review button doesn't do anything. Any idea?

When I compile my Xcode project using the xcodebuild command, I observe long incremental build durations. For example, compiling a new, empty project in Xcode only takes around one second. The same project takes 7 seconds to compile using the xcodebuild command. I've noticed that xcodebuild hangs at the "GatherProvisioningInputs" phase. Steps to Reproduce: Create a new Xcode project (iOS app template) Build the project in Xcode with timing summary enabled Build the same project from the command line with the following command: time xcodebuild -destination 'platform=iOS Simulator,name=iPhone 15 Pro,OS=latest' I would appreciate any insights or suggestions on how to improve the build times when using the xcodebuild command. Thank you in advance for your help!

Hi, I'm testing out Xcode 16 beta and I have a couple of questions: Is Swift Assist only available on Sequoia? I see that predictive code completion is per https://www.apple.com/newsroom/2024/06/apple-empowers-developers-and-fuels-innovation-with-new-tools-and-resources/, but I tried the beta on Sonoma and I'm not seeing it Regarding Swift Assist - I understand that code is only used to process requests and never stored on servers, and Apple will not use it to train machine learning models. However, my company's security team may still decide that using Swift Assist is too much of a risk. How can we disable it across multiple developer machines? Thank you!

I downloaded the new Xcode 16 Beta and AVP OS 2.0, But I saw that in Windows --> Devices + Simulators, my Mac was not recognizing that I had updated the Vision Pro's OS. So, I disconnected the AVP and tried connecting it again, but the device is not showing up. I've tried going into Remote Devices within the headset, disabling/enabling Developer Mode, turning off/on Wifi, restarting both devices. Is this an issue with XCode 16 Beta and/or Vision OS 2.0?

The operation couldn’t be completed. (ModelCatalog.CatalogErrors.AssetErrors error 1.) Domain: ModelCatalog.CatalogErrors.AssetErrors Code: 1 User Info: { DVTErrorCreationDateKey = "2024-06-11 11:01:58 +0000"; } Failed to find asset: com.apple.gm.safety_deny.input.code_intelligence.base - no asset Domain: ModelCatalog.CatalogErrors.AssetErrors Code: 1 System Information macOS Version 15.0 (Build 24A5264n) Xcode 16.0 (23037.4) (Build 16A5171c) Timestamp: 2024-06-11T14:01:58+03:00