We have an application WAVE PTT(Push to talk) and Application is in foreground state, When a user receives a cellular call and it is in the "ringing" state and application receives a VoIP APNS(video call) which is reported to CallKit. User rejects the Cellular call from CallKit UI, application Video call is also getting rejected (separate feedback - 19017978) and Here the issue is observed that an Application moved to background(OS26 beta 9). Issue is not observed in iOS 18 and older versions. Frequency : 1 out of 3. Please refer the sysdiagnose logs in below reported feedback ID. Feedback Ticket ID: 20187309 Syslogs Snippet reference: default 2025-09-10 12:30:06.991950 +0530 WAVE PTX 0x10e078100 - ApplicationStateTracker: UISceneDidEnterBackground

The crash log, an IPS file, indicates a crash occurred at a specific time, with the exception backtrace pointing to _terminateAppIfThereAreUnhandledVoIPPushes. However, cross-reference with the SysDiagnose logs, there is no corresponding process or activity for the application at the reported crash time. The app was not active, nor was it woken up by any event. IPS file and SysDiagnose logs have been attached in the Feedback. Feedback - FB20044587

Observed few times that providerDidBegin(_:) delegate never called for the complete app session after app init(as part of this CXProvider registered) which was built with SDK 26 and running on iOS 26. This issue observed multiple times with our testing. Since there is no providerDidBegin:, client is marking CallKit as not ready and never report any calls for VoIP APNS and ended up in app crash due to "[PKPushRegistry _terminateAppIfThereAreUnhandledVoIPPushes]" Please refer for sysdiagnose logs : FB19778306

When my Intents extension resolves an INStartCallIntent and returns .continueInApp while the device is locked, the call does not proceed unless the user unlocks the device. After unlocking, the app receives the NSUserActivity and CallKit proceeds normally. My expectation is that the native CallKit outgoing UI should appear and the call should start without requiring unlock — especially when using AirPods, where attention is not available. Steps to Reproduce Pair and connect AirPods. Lock the iPhone. Start music playback (e.g. Apple Music). Place the phone face down (or cover Face ID sensors so attention isn’t available). Say: “Hey Siri, call Tommy with DiscoMonday(My app name).” Observed Behavior Music mutes briefly. Siri says “Calling Tommy with DiscoMonday.” Lock screen shows “Require Face ID / passcode.” After several seconds, music resumes. The app is not launched, no NSUserActivity is delivered, and no CXStartCallAction occurs. With the phone face up, the same phrase launches the app, triggers CXStartCallAction, and the call proceeds via CallKit after faceID. Expected Behavior From the lock screen, Siri should hand off INStartCallIntent to the app, which immediately requests CXStartCallAction and drives the CallKit UI (reportOutgoingCall(...startedConnectingAt:) → ...connectedAt:), without requiring device unlock, regardless of orientation or attention availability when AirPods are connected.

We've observed an issue where the video button on the CallKit UI is disabled during Video VoIP calls. This issue appears to be specific to notch devices running SDK 26 and iOS 26 beta 7, specifically on iPhone 11. We have not seen this behavior on devices with Dynamic Island or on older iOS versions. For further details, please refer to the attached video and sysdiagnose file. : FB19827793 Our experimentation suggests this issue is exclusively present on non-Dynamic Island devices with iOS 26 beta.

The home AppIcon appears as it should but in settings I get the generic icon. I tried: giving the extension its own assets and AppIcon asset. giving the main app assets 2 targets, itself AND the extension setting AppIcon appearances to "none" and iOS "all sizes" and providing 29pt and the other sizes. Adding to info.plist and specifying "CFBundleIconFiles" Yes, nuked derived data, switched off phone, everything. Starting with just the standard 1024×1024 AppIcon (expecting Xcode to auto-generate all slices, including 29pt for Settings). It didn’t — Settings still shows the generic gear. Question: What should I do to make the extension’s icon show up in Settings? Environment • Xcode: 16.4 (16F6) • iOS: 18.5 (device) • Targets: iOS app + Call Directory extension • App icon pipeline: asset catalog (single-size initially, now legacy grid)

Hi everyone, on iOS, when a VoIP call arrives and the user accepts it from the lock screen (after unlocking with Face ID/Touch ID), is there any way to automatically bring my app to the foreground and show the in-app call screen, instead of staying in the system CallKit UI?

Hello. I've implemented the Live Caller ID Lookup feature in my app, but sometimes I get a weird error. When I call LiveCallerIDLookupManager.shared.refreshPIRParameters(...) from my app, it sometimes throws an error: Error Domain=com.apple.CipherML Code=1100 "Unable to query status due to errors: The resource could not be loaded because the App Transport Security policy requires the use of a secure connection." UserInfo={NSLocalizedDescription=Unable to query status due to errors: The resource could not be loaded because the App Transport Security policy requires the use of a secure connection., NSUnderlyingError=0x118f65740 {Error Domain=NSURLErrorDomain Code=-1022 "The resource could not be loaded because the App Transport Security policy requires the use of a secure connection." UserInfo={NSLocalizedDescription=The resource could not be loaded because the App Transport Security policy requires the use of a secure connection., NSErrorFailingURLKey=http://www.example.com/config}}} What does this error mean? And where did the example.com part come from? What should I do to get rid of this error? My Service URL is hardcoded in the Live Caller ID Lookup Extension of my app and it is definitely not example.com.

Hello, I noticed the new entitlement in iOS 26 under LiveCommunicationKit: Preparing your app to be the default dialer app. My question is about eligibility: If a developer account is registered in the EU, can any app add the Default Dialer capability, or is it restricted only to apps that provide real calling/communication functionality (e.g., WhatsApp, Telegram, Skype)? If granted, does this capability allow the app to make/receive cellular calls and access call history, or is it limited only to VoIP-style scenarios through CallKit integration? What are the minimum functionalities required to support this feature (e.g., having a dial pad, call history screen, etc.)? Why must the developer account be registered in the EU to use this entitlement? Thanks in advance for the clarification!

I've been trying to understand what kind of UX is available if my app is using the default-dialer capability. I have found https://developer.apple.com/documentation/livecommunicationkit/preparing-your-app-to-be-the-default-dialer-app and I am in the EU. On android I built the UX I want and it's quite neat, so now I'm trying to work. out what I can get on iOS. Because the product is kind of worthless with just android. I have built a simple dialer ux with a numberpad, contact lookup etc. Then when the user presses the Call button does it have to pop up the system prompt "Call number"? Does it have to swap over to the system ui for the actual call? So there's no way to show information about the call, during the call? Or am I using the frameworks incorrectly? I am very new to iOS development. TrueCaller and others show validation, but as I understand it they pre-fetch all the data, I can't do that.

Call blocking using a third-party CallKit app is not longer working with the latest iOS 26 Public Beta (23A5297m). We've tried several different Call Blocking apps (that used to work fine on iOS 18.5) and their call blocking functionality is not working anymore. All calls pass through and the phone rings on those "blocked" numbers. We got several user complaints about our app that is not working on iOS 26 Public Beta. We've filed 2 bug reports with Feedback Assistant: FB19140680 FB19140594 Please fix this issue in the next Beta versions of iOS 26 to have a stable iOS 26 release in the future. Thank you in advance.

For call reported in lockscreen, after updating the CXCallUpdate for an active callkit reported call with reportCallWithUUID:updated:. The display namer in the callkit UI is not getting updated. This issue exists from iOS 18 and later. Issue is always seen. Feedback updated with iOS 26 beta logs: FB13969440

An issue with the CallKit UI, specifically regarding the functionality of the speaker button. When a user initiates a video call with CallKit and then, using the existing CallKit session, initiates an audio call, there are no issues with CallKit or the audio. However, if the user terminates the video call from the CallKit UI, the active CallKit session ends. To resume the ongoing audio call, we report a new CallKit call upon the end call trigger. While there are no issues with this reporting, the CallKit UI does not provide an audio route for the built-in receiver, and the speaker button remains unresponsive. IPA was build on SDK 18 and running on iOS beta 26. Issue is NOT seen with SDK18 and running iOS 18.x or lower devices. Feedback - FB18855566

Hello, I’m new here. I'm developing an iOS app and I’d like to know whether it is possible to detect if a phone call is being recorded by another app running in the background. I’ve already reviewed the documentation for CallKit and AVAudioSession, but I couldn’t find anything related. My expectation was that iOS might provide some callback or API to indicate if a call is being recorded (third-party apps), but so far I haven’t found a way. My questions are: Does iOS expose any API to detect if a call is being recorded? If not, is there any indirect, Apple's policy compliant method (e.g., microphone usage events) that can be relied upon? Or is this something that iOS explicitly prevents for privacyreasons? Expecting solutions that align with Apple’s policies and would be accepted under the App Store Review Guidelines. Thanks in advance for any guidance.

I added a extension called Call Directory to an IOS app as we want to call blocking and caller id. I was able to add App Groups to both runner and CallDirectory. I cannot see of add Call Directory capability. Am I missing something. I added the extension through the Call Directory Target template. If I try to add this to CallDirectory.enitlements manually com.apple.developer.callkit.call-directory call-blocking caller-identification i recieve this signing error. Provisioning profile "iOS Team Provisioning Profile: "" doesn't include the com.apple.developer.callkit.call-directory entitlement. I cannot add Call Directory to an identifier in Apple Developer either.

We are currently developing a VoIP application that supports Local Push extention. We discovered an issue with this app where the performEndCallAction response to reportCallWithUUID is occasionally slow.(See below for detail) It usually works without any issues, so we believe there is no problem with the app's processing flow. This issue only occurs very rarely, but each time it does there is a delay of about 60 seconds, which leads us to suspect that there is some kind of problem on the iOS side, and that fail-safe processing is occurring after 60 seconds. Do you know of a workaround for this issue?

iOSアプリでNEAppPushSessionを使い、NEAppPushDelegateの通知を受けてCallKitの着信画面を表示する実装をしていますが、以下の問題に直面しています。 8/13 ログにて下記のエラーが頻発しました。 通知の受け取りテストを約120回してその間ずっとこのエラーが出ていました。 エラー 2025-08-14 11:27:06.793073 +0900 nesessionmanager NESMAppPushSession[SimplePushDefaultConfiguration:7B7218F3-94B5-4AE5-9B9E-94E176694D02] failed to report incoming call to CallKit, error: Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service named com.apple.callkit.networkextension.messagecontrollerhost was invalidated from this process." UserInfo={NSDebugDescription=The connection to service named com.apple.callkit.networkextension.messagecontrollerhost was invalidated from this process.} このエラーログが頻発した後、callkitの通知画面が表示されなくなりました。 ですがどうやら通知の監視は開始しているようです。 15時間後の8/14 時間をあけたからか、再度通知が来るようになりました。 ですが再度通知の受け取りテストを行った時に同じエラーログが出ました。 再度通知テストを約120回程行ったら、このエラーログが頻発した後、callkitの通知画面が表示されなくなりました。 ですがどうやら今回も通知の監視は開始しているようです。 15時間後の8/15 今日は15時間かけても通知を取得できませんでした。 ですが同じく通知の監視は開始していそうです。 iPhoneの再起動、Xcodeのクリーンアップ、アンインストールして再インストールなどしても通知は来ないままでした。 また、不思議なことに通知が来ない事象が起きた端末以外でも同じように通知を取得することができません。 他の通知は受け取ることができますが独自の通知であるNEAppPushManagerだけ通知を取得することができません。 質問です。 再度通知を出すためには何をすれば良いでしょうか。 この事象は4099エラーを出しすぎたことにより発生する障害なのでしょうか。 4099エラーを出ている原因は何でしょうか。

I am currently implementing VoIP push notifications in my iOS app using PushKit. On iOS 18, I am able to receive VoIP notifications successfully when the app is in the foreground. However, when the app is in the background or in a terminated (kill) state, the notifications do not arrive. In earlier iOS versions, my existing implementation worked as expected across all app states. This issue seems to have started after testing on iOS 18, which appears to have introduced stricter permission or background execution requirements. Questions: Has iOS 18 introduced new permission requirements or entitlements for VoIP push notifications? Do I need to explicitly request a new type of user permission for VoIP notifications? Are there additional background modes, Info.plist keys, or PushKit changes required for VoIP to work in background and terminated states on iOS 18? Additional Information: . Foreground: Works fine, pushRegistry(_:didReceiveIncomingPushWith:for:completion:) is triggered. . Background/Terminated: No call to the above delegate method. . Using correct voip push type in the payload. . PushKit is configured in AppDelegate. . Background modes for "Voice over IP" and "Background Processing" are enabled. . Using a real device with iOS 18 for testing (not simulator). Any guidance or updated documentation references for handling VoIP pushes in iOS 18 would be greatly appreciated.

I’m currently developing a spam number blocking app using CallKit. I’ve confirmed that up to iOS 26 beta 5, there is a bug where number blocking doesn’t work. In my current tests, the ringtone doesn’t sound and the blocking works fine, but the call still appears in the missed calls list, which is bothersome. If the bug is fixed in future versions (as it was in previous versions), is there a way to block the number so that it also does not appear in missed calls?

Good afternoon, Our team is currently developing a mobile application that includes video call functionality, and we are seeking the optimal approach to enable incoming calls on iOS devices. Ideally, we would like calls to be delivered even when the app is completely closed or after the device is restarted. As I understand it, this may require obtaining VoIP permissions; otherwise, calls may only work when the app is open or running in the background. I would appreciate it if you could confirm my understanding and advise me on the steps or requirements for obtaining the appropriate permissions. Currently, when I try to launch the app in XCode, I see an error (screenshot).