Is it possible to directly distribute a macOS app with a Developer ID Certificate that belongs to a different team? I am trying to resolve issues that arise when distributing a macOS app with a Network Extension (Packet Tunnel) outside the App Store using a Developer ID Certificate from a different team than the app’s provisioning profiles and entitlements. I started by attempting Direct Distribution in Xcode with automatic signing. However, it fails with the following message: Provisioning profile "Mac Team Direct Provisioning Profile: ” failed qualification checks: Profile doesn't match the entitlements file's value for the com.apple.developer.networking.networkextension entitlement. I suspect the issue is that the provisioning profile allows "packet-tunnel-provider-systemextension", whereas the entitlements generated by Xcode contain "packet-tunnel-provider". When I manually modify the .entitlements file to include the -systemextension suffix, the project fails to build because Xcode does not recognize the modified entitlement. If there is a workaround for this issue, please let me know. Due to these issues, I resorted to manually creating a signed and notarized app. My process is as follows: Export the .app from the Xcode archive. Since the exported .app does not contain the necessary entitlements or provisioning profile for direct distribution, I replace Contents/embedded.provisioningprofile in both the .app and the .appex network extension. Sign the app and its components in the following order: codesign --force --options runtime --timestamp --sign "Developer ID Application: <name>" <app>.app/Contents/Frameworks/<fw>.framework/ codesign --force --options runtime --timestamp --sign "Developer ID Application: <name>"<app>.app/Contents/PlugIns/<netext>.appex/Contents/Frameworks/<fw>.framework/Versions/A/<fw> codesign --force --options runtime --entitlements dist-vpn.entitlements --timestamp --sign "Developer ID Application: <name>" <app>.app/Contents/PlugIns/<netext>.appex/ codesign --force --options runtime --entitlements dist.entitlements --timestamp --sign "Developer ID Application: <name>" <app>.app Verify the code signature: codesign --verify --deep --strict --verbose=4 <app>.app - <app>.app: valid on disk - <app>.app: satisfies its Designated Requirement Create a ZIP archive using: ditto -c -k --sequesterRsrc --keepParent <app>.app <app>.zip Notarize the app with notarytool and staple it. The notarization completes successfully with errors: nil. Package the notarized app into a DMG, notarize, and staple the DMG. The app runs successfully on the development machine. However, when moved to another machine and placed in /Applications, it fails to open. Inspecting Console.app reveals Gatekeeper is blocking the launch:
 taskgated-helper <bundleid>: Unsatisfied entitlements: com.apple.developer.networking.networkextension, com.apple.developer.team-identifier taskgated-helper entitlements: { "com.apple.developer.networking.networkextension" = ("packet-tunnel-provider-systemextension"); "com.apple.developer.team-identifier" = <teamid>; } As mentioned earlier, the Developer ID Certificate used for signing belongs to a different team. We are a third-party developer and do not have access to the Developer ID Certificate of the team assigned as the team-identifier. When I changed the bundle identifier (app ID), team, entitlements, and provisioning profiles to match the team associated with the Developer ID Certificate, the app worked. My question is:
 Is this failure caused by using a Developer ID Certificate from a different team, or should it still work if the provisioning profiles and entitlements are correctly set? Could there be an issue elsewhere in the provisioning profiles or entitlements for the original app ID?

1.Provisioning profile "xxx" doesn't include signing certificate "Developer ID Application: xxxxx". 2.Provisioning profile "xxx" doesn't match the entitlements file's value for the com.apple.developer.networking.networkextension entitlement. I decoded the profile, <dict> <key>com.apple.developer.system-extension.install</key> <true/> <key>com.apple.developer.networking.networkextension</key> <array> <string>packet-tunnel-provider-systemextension</string> <string>app-proxy-provider-systemextension</string> <string>content-filter-provider-systemextension</string> <string>dns-proxy-systemextension</string> <string>dns-settings</string> <string>relay</string> <string>url-filter-provider</string> <string>hotspot-provider</string> </array> <key>com.apple.security.application-groups</key> <array> <string>xxxxx</string> <string>xxxxx</string> </array> <key>com.apple.developer.networking.vpn.api</key> <array> <string>allow-vpn</string> </array> <key>com.apple.application-identifier</key> <string>xxxxx</string> <key>keychain-access-groups</key> <array> <string>xxxxx</string> </array> <key>com.apple.developer.team-identifier</key> <string>xxxxx</string> </dict> Kindly help me to resolve this.

Hi all, I have a requirement to intercept and modify inbound connections on macOS. For example, if I’m running a server on TCP port 8080 on macOS, I want to intercept all traffic to and from this port. I’m open to working at the level of TCP flows or even raw Ethernet packets, depending on what’s feasible. I’m already successfully using NETransparentProxy to intercept outbound traffic, but I haven’t found a way to handle inbound connections using any of the Network Extension APIs. Is there any supported or alternative approach for intercepting inbound traffic (via NE, NKEs, PF, or something else)? Any guidance would be greatly appreciated. Thanks in advance!

We are currently developing a VoIP application that supports Local Push extention. I would like to ask for your advice on how the extension works when the iPhone goes into sleep mode. Our App are using GCD (Grand Central Dispatch) to perform periodic processing within the extension, creating a cycle by it. [sample of an our source] class LocalPushProvider: NEAppPushProvider { let activeQueue: DispatchQueue = DispatchQueue(label: "com.myapp.LocalPushProvider.ActiveQueue", autoreleaseFrequency: .workItem) var activeSchecule: Cancellable? override func start(completionHandler: @escaping (Error?) -&gt; Void) { : self.activeSchecule = self.activeQueue.schedule( after: .init(.now() + .seconds(10)), // start schedule after 10sec interval: .seconds(10) // interval 10sec ) { self.activeTimerProc() } completionHandler(nil) } } However In this App that we are confirming that when the iPhone goes into sleep mode, self.activeTimerProc() is not called at 10-second intervals, but is significantly delayed (approximately 30 to 180 seconds). What factors could be causing the timer processing using GCD not to be executed at the specified interval when the iPhone is in sleep mode? Also, please let us know if there are any implementation errors or points to note. I apologize for bothering you during your busy schedule, but I would appreciate your response.

We have a transparent proxy in a system extension. We intercept all traffic from machine using 0.0.0.0 and :: as include rules for protocol ANY. We intercept all DNS queries and forward them to a public or private DNS server based on whether its a private domain or not. In most cases, everything works fine. However, sometimes, git command (over SSH) in terminal fail to resolve DNS and receives below error: ssh: Could not resolve hostname gitserver.corp.company.com: nodename nor servname provided, or not known While investigating, we found that mDNSResponder was using HTTPS to dns.google to resolve the queries securely. DNS Request logs While this works for public domains (not how we would want by anyways), the query fails for our company private domains because Transparent Proxy cannot read the DNS query to be able to tunnel or respond to it. Several years back when secure DNS was introduced to Apple platforms, I remember in one of the WWDC sessions, it was mentioned that VPN providers will still get plain text queries even when system has secure DNS configured or available. In this case, there is no DNS proxy or any other setting to enable secure DNS on the machine except for Google public DNS configured as DNS server. So my question is: Shouldn't transparent proxy also get plain text DNS queries like PacketTunnelProvider? And is there a way to disable/block the secure DNS feature in mDNSResponder or on machine itself? Using Transparent proxy or MDM or any other config? So that transparent proxy can handle/resolve public and private domains correctly. Another thing we noticed that not all queries are going over secure channel. We still get quite a few queries over plain UDP. So is there any rule/criteria when mDNSResponder uses secure DNS and when plain text DNS over UDP?

Hi all. I'm exploring the new URL Filter framework that supports filtering URLs in encrypted HTTPS traffic. I'm particularly interested in understanding how we can leverage this in System Extensions on macOS. Can URL Filter be implemented within a macOS System Extension? The documentation seems to focus primarily on iOS implementations. I've attempted to evaluate the "Filtering traffic by URL" sample code by running PIRService on localhost (tried both macOS native binary, and Linux container) and SimpleURLFilter on the iOS simulator (26.0 23A5260l). However, the app fails to apply the configuration with NetworkExtension.NEURLFilterManager.Error 8, and PIRService doesn't receive any requests. Is this functionality supported in the simulator environment? Does Keyword Private Information Retrieval support pattern matching or wildcards? For example, would it be possible to create rules that block URLs like "object-storage.example[.]org/malicious-user/*"? Regarding enterprise use cases: While I understand URL filtering uses Private Information Retrieval to enhance user privacy, enterprise security teams often need visibility into network traffic for security monitoring and incident response. Are there supported approaches for enterprises to monitor HTTPS URLs? Any insights or clarification would be greatly appreciated. Shay

We are developing an iOS application with a key feature designed to enhance user safety: real-time assessment of Wi-Fi network security. The "Safe Wi-Fi" feature aims to inform users about the security level of the Wi-Fi network they are currently connected to. Our goal is to provide this information seamlessly and continuously, even when the user isn't actively using the app. Currently, we've implemented this feature using a NWPathMonitor. The limitation of NWPathMonitor is that it doesn't function when the app is in a kill state. We are looking for guidance on how to achieve persistent Wi-Fi security monitoring in the background or when the app is killed. Is there any API (Public, Special API, etc) or a recommended approach that allows for real-time Wi-Fi connection monitoring (including connection changes and network details) even when the app is not actively running or is in a kill state. Thank you in advance for your help.

Simulator: iPhone 16 pro (iOS 26) Minimum Deployments: iOS 16.0+, not iOS 17. Here is the demo: import SwiftUI import NetworkExtension struct ContentView: View { private var monitor = NWPathMonitor() var body: some View { VStack { Text("Hello, world!") } .task { let _ = URLSession.shared } } }

Hi all, I’m developing a companion iOS app that connects to a device-created Wi-Fi hotspot to transfer videos or other files WebSocket. The challenge is: once the iPhone connects to this hotspot, it loses internet access because iOS routes all traffic through Wi-Fi. However, I’d like to keep the iPhone’s cellular data active and usable while staying connected to the local hotspot — so the app can access cloud APIs, or the user can continue using other apps that require internet access. I understand that iOS prioritizes Wi-Fi over cellular, but are there any supported workarounds or patterns (e.g., MFi programs, local-only Wi-Fi access, NEHotspotConfiguration behavior, etc.) that : • Using Wi-Fi only for local communication; • cellular to remain active for internet access. Any insights or Apple-recommended best practices would be greatly appreciated — especially any official references regarding MFi Accessory setup or NEHotspotConfiguration behavior in this context. Thanks in !

How would one interpret guideline 5.4 VPN? It states: "Apps offering VPN services may not sell, use, or disclose to third parties any data for any purpose, and must commit to this in their privacy policy" Does that mean you cannot integrate Ad SDKs inside apps offering VPN functionality? Or does this only apply VPN Traffic? So using third party Ad SDKs like Admob is fine, as long you don't share any VPN traffic data? (e.g. Admob runs inside the App Process/UI, but doesn't run inside NEPacketTunnel) We have a similar case (and couldn't get clarification from App Review so far)

Hello! I develop transparent proxy based application, and I'm receiving a lot of crash reports from macOS 15.5 for crash in __88-[NEExtensionAppProxyProviderContext setInitialFlowDivertControlSocket:extraValidation:]_block_invoke.90 when stopping. Even very old versions of my software started crashing on macOS 15.5. I checked my extension that it correctly calls setTunnelNetworkSettings:nil on proxy stop, but crash is still here. Does anybody else have this problem? Do you know any workaround for it?

We have an application which is written in Swift, which activates Transparent Proxy network extension. We are using Jamf MDM profile for deployment. To avoid the user deleting / disabling the extension from General -&gt; LogIn Items &amp; Extension -&gt; Network Extensions screen, we are using "Non-removable system extensions from UI" attribute under Allowed System Extensions and Teams IDs section. In new Mac OS 26 (Tahoe), user can also enable/disable the extension from General -&gt; LogIn Items &amp; Extension -&gt; Apps tab. The "Non-removable system extensions from UI" attribute set in Jamf MDM profile does not apply to this tab. Same attribute is working for General -&gt; LogIn Items &amp; Extension -&gt; Extensions tab and there the slider is greyed out and Remove option is not available under more menu. Is there any new key/configuration defined to disable the slider from General -&gt; LogIn Items &amp; Extension -&gt; Apps tab? Created https://feedbackassistant.apple.com/feedback/18198031 - FB18198031 feedback assistant ticket as well.

I’m working on an iOS parental-control app that needs to block specific network traffic (e.g. certain domains or URLs). We’ve already obtained the Family Controls entitlement (since our app is explicitly a parental-control solution), but we do not use MDM to supervise devices. In testing, our NEFilterDataProvider extension only activates when the device is enrolled under a managed Family Controls profile. I am aware that we can use a PacketTunnel to achieve this but i was wondering if there is any simpler solution to this? Thanks for you time!

Hi guys, I try to create a content filter app by using network extension api. When it comes to a https/tls remote endpoint, the remoteEndpoint.hostname will always be "" instead of the actual hostname. How can I extract the actual hostname? private func filterTraffic(flow: NEFilterSocketFlow) -> NEFilterNewFlowVerdict { // Default action from settings will be used if no rules match logger.error("filter traffic...") guard let remoteEndpoint = flow.remoteEndpoint as? NWHostEndpoint else { logger.error("not a NWHostEndpoint)") return .allow() } logger.error("host name: \(remoteEndpoint.hostname)") if remoteEndpoint.hostname.hasSuffix("google.com"){ logger.error("google.com") return .drop() } return .allow() } code-block

hi everybody, When I use the following code to connect to WiFi network, an error message of "error=null" or "error='Error Domain=NEHotspotConfigurationErrorDomain Code=11 "" UserInfo={NSLocalizedDescription=}' " will occur. It has been uploaded to Feedback. Feedback ID： FB16819345 (WiFi-无法加入网络) NEHotspotConfiguration *hotspotConfig = [[NEHotspotConfiguration alloc] initWithSSID:ssid passphrase:psk isWEP:NO]; [[NEHotspotConfigurationManager sharedManager] applyConfiguration:hotspotConfig completionHandler:^(NSError * _Nullable error) { }];

Hi all, im trying to implement a per-app vpn in my network extension (packet tunnel with custom protocol), where only the traffic generated by my application should be routed trought my network extension. It is possible to accomplish that on a non managed or supervised device? Setting the routingMethod as .sourceApplication in NEPacketTunnelProvider is not possible as it is read-only, can it work trying overriding the var as a computed property? The documentation lack of examples. Thanks in advance! Love

Hi, We're hoping someone can help us determine why we're running into some odd behavior where a simple HTTP request is intermittently failing with error code NSURLErrorTimedOut (-1001) Background: HTTP request details: The request is sent from a PacketTunnelProvider and is meant to be a Captive Portal check. The request is insecure (HTTP, instead of HTTPS) but we have configured App Transport Security (ATS) to allow insecure HTTP loads from this hostname. See info.plist excerpt below. The request is sent using NSMutableURLRequest/NSURLSessionDataTask using an Ephemeral session configuration. We only modify 2 properties on NSMutableURLRequest The timeoutInterval property is set to 5 seconds. The allowsCellularAccess property is set to NO. No headers or other configuration are modified. NSURLSessionDataTask completionHandler receives an NSError: We checked the NSError's userInfo dictionary for an underlying error (NSUnderlyingErrorKey). The underlying error shows the same code NSURLErrorTimedOut (-1001). We haven't seen any underlying errors with code NSURLErrorAppTransportSecurityRequiresSecureConnection (-1022) . On a laptop, we confirmed that the Captive portal check site is accessible and loads correctly. Laptop and iOS device are on the same Wi-fi. I've witnessed the error in the debugger, and been able to load the site on my laptop at the same time. So, we don't have any reason to believe this is server related. The PacketTunnelProvider is configured to only handle DNS queries and is not intercepting/routing the HTTP traffic. The DNS query for the Captive portal request is handled correctly. In fact, outside of the PacketTunnelProvider, all sites load in Mobile Safari. So, we're not breaking internet on this device. In other words, we have no reason to believe our DNS handling is interfering with the HTTP request since other HTTP requests are working as expected. We setup CFNetwork Diagnostic Logging (https://developer.apple.com/documentation/network/debugging-https-problems-with-cfnetwork-diagnostic-logging) In console.app, we are able to find some logging on the Timeout See excerpt from Console.app's log below. We confirmed that the nscurl tool did not flag the request (https://developer.apple.com/documentation/security/identifying-the-source-of-blocked-connections) All ATS tests run with nscurl were successful. See nscurl command used below. Questions: What are next steps to debug this intermittent timeout? What should we look for in the CFNetwork Diagnostic Logging to help debug the issue further? Thanks in advance for your help! ATS configuration setup in both the UI and the PacketTunnel's info.plist file: <key>NSAppTransportSecurity</key> <dict> <key>NSExceptionDomains</key> <dict> <key>subdomain.subdomain.example.com</key> <dict> <key>NSExceptionAllowsInsecureHTTPLoads</key> <true/> <key>NSIncludesSubdomains</key> <true/> </dict> </dict> </dict> Excerpt from Console.app's log: CFNetwork Example PacketTunnel 10836 Diagnostics default 11:30:33.029032-0700 CFNetwork Diagnostics [3:834] 11:30:32.946 { Did Timeout: (null) Loader: request GET http://subdomain.subdomain.example.com/content/cpcheck.txt HTTP/1.1 Timeout Interval: 5.000 seconds init to origin load: 0.000592947s total time: 5.00607s total bytes: 0 } [3:834] nscurl command $ /usr/bin/nscurl --ats-diagnostics --verbose http://subdomain.subdomain.example.com/content/cpcheck.txt

In our iOS application, we need to list available WiFi networks so that users can select one for device configuration. Here's the workflow: Initially, the hardware device acts as a WiFi Access Point (AP). The app should scan for nearby WiFi networks to detect the device's AP. The app connects temporarily to this AP and sends the selected WiFi credentials to the device. The device then connects to the selected WiFi network and stops broadcasting its AP. Is this flow achievable on iOS? We understand that Apple restricts access to WiFi scanning APIs — are there any supported methods (e.g., using NEHotspotHelper) or entitlements (such as MFi) that could enable this?

Hello, Our users are seeing random crashes in our packet filter system extension on macOS. Any help pointing me in the right direction to either avoid the issue or fix it would be greatly appreciated. Attached is the crash log. Thank you. packetfilter.crash Crashed Thread: 2 Dispatch queue: com.apple.network.connections Exception Type: EXC_BAD_ACCESS (SIGBUS) Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000112918700 Exception Note: EXC_CORPSE_NOTIFY Termination Signal: Bus error: 10 Termination Reason: Namespace SIGNAL, Code 0xa Terminating Process: exc handler [40687] ... Thread 2 Crashed:: Dispatch queue: com.apple.network.connections 0 libsystem_kernel.dylib 0x00007fff2089b46e os_channel_get_next_slot + 230 1 com.apple.NetworkExtension 0x00007fff2e2e2643 __40-[NEFilterPacketInterpose createChannel]_block_invoke + 560 2 libdispatch.dylib 0x00007fff20718806 _dispatch_client_callout + 8 3 libdispatch.dylib 0x00007fff2071b1b0 _dispatch_continuation_pop + 423 4 libdispatch.dylib 0x00007fff2072b564 _dispatch_source_invoke + 2061 5 libdispatch.dylib 0x00007fff20720318 _dispatch_workloop_invoke + 1784 6 libdispatch.dylib 0x00007fff20728c0d _dispatch_workloop_worker_thread + 811 7 libsystem_pthread.dylib 0x00007fff208bf45d _pthread_wqthread + 314 8 libsystem_pthread.dylib 0x00007fff208be42f start_wqthread + 15

Hi, I'm very new to everything related to networking and I've been trying to make some sort of "parental control" app for macOS where if the user tries to access some website domain (e.g youtube.com) the request is denied and the user can't access the website. Turns out I used NEFilterDataProvider and NEDNSProxyProvider to achieve that but it's not 100% bullet proof. First problem I had is that most of the time I can't access the hostname in the NEFilterDataProvider when trying to extract it from the socketFlow.remoteEndpoint. Most of the time I get the ipv4. And the problem is : I don't know the IPV4 behind the domains, specially when they're changing frequently. if let socketFlow = flow as? NEFilterSocketFlow { let remoteEndpoint = socketFlow.remoteFlowEndpoint switch remoteEndpoint { case .hostPort(let host, _): switch host { case .name(let hostname, _): log.info("🌿 Intercepted hostname: \(hostname, privacy: .public)") case .ipv4(let ipv4): let ipv4String = ipv4.rawValue.map { String($0) }.joined(separator: ".") log.info("🌿 Intercepted IPV4: \(ipv4String, privacy: .public)") So that's why I used the DNSProxyProvider. With it I can get the domains. I succeeded to drop some of the flows by not writing the datagrams when I see a domain to block, but that does not work 100% of the time and sometimes, for youtube.com for example then the website is still reachable (and sometimes it works successfully and I can't access it). I guess because the IP behind the domain has already been resolved and so it's cached somewhere and the browser does not need to send an UDP request anymore to know the IP behind the domain? Is there a 100% bullet proof way to block traffic to specific domains? Ideally I would like to get rid of the DNSProxyProvider and use only the NEFilterDataProvider but if I can't access the hostnames then I don't see how to do it.