I am trying to localize the CFBundleDisplayName and OSBundleUsageDescription of a driver that is part of an app. I am able to use InfoPlist.strings files to localize the Bundle display name for the app, but when I try to use the same file as part of the driver, the name displayed in settings for the app does not change correctly. In fact, it seems to follow the default language set in the xcode project. If the default language is not included in the suite of InfoPlist.strings files, it seems to take the string from the info.plist file. sometimes it just seems to take the English version regardless of the default language or tablet language. Has anyone had success with this?

While developing our driver, we've noticed that the *.ips report that contains the stacktrace of the crash is not always generated. I'm wondering why this report may not get generated, or if there's anything specific to do to guarantee it gets generated.

I have an iPhone 14 Pro. I downloaded the iOS 26 beta and had a SERIOUS error, rendering the phone unusable. I charged it to 60% and kept it plugged in while updating. While updating, I restarted several times at the Apple logo, then at the Welcome screen, and it had quite a few bugs with low battery warnings. When I turned it on, I noticed I had 1% (I thought it was strange). When it was plugged in, it wouldn't charge; it only had 1% left, and it also restarted every 2 minutes. Off-plugged, it did exactly the same thing. In the end, I had to go back to iOS 18.5; I had no problems with this version.

Just wanted to check here to see if anyone else is running into the issue of CarPlay not working at all on iOS 26 Beta 1, even with the update on Friday. I plug my phone in (wired) and CarPlay never shows up. I've seen a Reddit thread where other folks are seeing the same thing.

I'm working on a DriverKit driver. I have it running on macOS, including a very simple client app written in SwiftUI. Everything is working fine there. I've added iPadOS as a destination for the app as demonstrated in the WWDC video on DriverKit for iPadOS. The app builds and runs on my iPad, as expected (after a little work to conditionalize out my use of SystemExtensions.framework for installation on macOS). However, after installing and running the app on an iPad, the driver does not show up in Settings->General, nor in the app-specific settings pane triggered by the inclusion of a settings bundle in the app. I've confirmed that the dext is indeed being included in the app bundle when built for iPadOS (in MyApp.app/SystemExtensions/com.me.MyApp.MyDriver.dext). I also can see in the build log that there's a validation step for the dext, and that seems to be succeeding. I don't know why the app isn't being discovered -- or in any case surfaced to the user -- when the app is installed on the iPad. Has anyone faced this problem and solved it? Are there ways to troubleshoot installation/discovery of an embedded DriverKit extensions on iOS? Unlike on macOS, I don't really see any relevant console messages.

I have an app that captures USB storage device and sends some commands to it. The app has a privilege helper tool which captures the USB device. Everything was working fine upto macOS 15.2 but it 15.3 update broke the functionality. When the helper tool tries to capture the USB device, it is able to capture IOUSBHostDevice but fails to capture IOUSBHostInterface. The error is Code: 3758097097; Domain: IOUSBHostErrorDomain; Description: Failed to create IOUSBHostInterface.; Reason: Failed [super init] I have verified the UID, EUID, GID, EGID = 0 for the helper process. So by IOUSBHost documentation it should have worked. The code that cause the error inside the helper tool is func captureUSBInterface(interface: io_service_t) -> IOUSBHostInterface? { let queue = DispatchQueue(label: "com.example.usbdevice.queue2") var capturedInterface: IOUSBHostInterface? do { capturedInterface = try IOUSBHostInterface(__ioService: interface, options: .deviceCapture, queue: queue, interestHandler: nil) } catch { NSLog("Failed to capture USB interface: \(error)") return nil } return capturedInterface } The app has sandbox=False and is distributed outside of the App Store. Please advise (long-term, short-term solutions) on how to make this work.

We're seeing a consistent issue where iPads with the A16 chip fail to connect to our BLE device, which uses a Silicon Labs chip running Gecko SDK 3.x. All other Apple devices — including older iPads and iPhones — connect without any problems. According to Silicon Labs, the issue stems from the iPad A16 sending an LL_CHANNEL_REPORTING_IND message (opcode 0x28) during connection establishment: Per Silicon Labs: "Currently the iPad 16 will send a message for LL_CHANNEL_REPORTING_IND (opcode 0x28). This is a feature that is not supported in Gecko SDK 3.x. Shortly after, the BLE module responds with an 'Unknown Response' (opcode 0x07), indicating that it does not support opcode 0x28 After this exchange the iPad stops sending meaningful transactions to the BLE module and eventually closes the connection. The BLE Module is responding to this unknown request as specified in the BT Core Spec Volume 6 Part B." Unfortunately, the firmware on these BLE modules cannot be updated remotely, and we've already shipped several thousand units to customers. Given how widely Silicon Labs' BLE modules are deployed, we suspect this issue could be affecting many other developers and products as well. We’re hoping Apple might offer a workaround or allow us access — even internally or unofficially — to suppress or bypass this feature in CoreBluetooth for this specific scenario. For example, is there a way to disable LL_CHANNEL_REPORTING_IND or instruct the stack to ignore the unknown response from the peripheral? We’re open to any workaround via CoreBluetooth (even private APIs or entitlements, if necessary) that would allow us to preserve compatibility without a mass recall. If there's an Apple engineer monitoring this, we'd be extremely grateful for guidance or escalation. Thank you!

1) The circumstances: iPADOS~>18, USB still-imaging-gadget, 1-3 gadgets might connect simultaneously via USB-hub, proprietary DExt, UserClient App in developers' iPADs or in TestFlight. = 1 variation A) UserClientApp has attribute [Background modes][Enable external communications]. = 1 variation B) "active USB-hub" vs "passive". = 1 variation C) "ConsoleApp logs iPAD" vs "ConsoleApp is not started". = 1 the term "zombie" below assume issue: == after plug-in ConsoleApp logs "IOUsbUserInterface::init", "::start"; == UserClient never receives respective callback from IOServiceAddMatchingNotification == further IOKit APIs "teardown", "restart" and "re-enumeration of connected gadgets" doesn't reveal the zombie (while it sees another simultaneous gadget); == unplug of the gadget logs "IOUsbUserInterface::stop". =2) The situation when UserClient is in foreground: ~ everything is fine. Note in MAC OS everything (same DExt and UserClient-code) works fine in background and in foreground. =3) The situation when UserClient is in background (beneath ~"Files" or "Safari"): =3A) "1A=true" phys plugin causes zombie in ~1/20 cases (satisfactory) =3B) "1A=false" phys plugin causes zombie in ~1/4 cases (non-satisfactory) =3C) "1 variation B" and "1 variation C" reduce zombies by ~>30%. =3D) ConsoleApp logs with filter "IOAccessory" (~about USB-energy) always look similar by my eyes. =4) From Apple-store: "The app declares support for external-accessory in the UIBackgroundModes"..."The external accessory background mode is intended for apps that communicate with hardware accessories through the External Accessory framework."..."Additionally, the app must be authorized by MFi," =5) My wish/ask: =5 option A) A clue to resolve the "zombie-plugin-issue in background" in a technical manner. = E.g. find a straightforward solution that ~elevates UserClient's "privileges" in background like [Enable external communication]... E.g. what ConsoleApp-logs to add/watch to reveal my potential bugs in DExt or in UserClient? =5 option B) A way to pursue Apple-store to accept (without MFI) an UserClientApp with [Enable external communication].

Dear Apple CS, I’m working with NFC ISO15693 tags using NFCTagReaderSession / NFCISO15693Tag, and I’d like to read these tags in the background if possible. Is there any way to read this tag type without triggering the system NFC popup that iOS normally shows? Please note it will not be a public app, the app is meant for internal use for our employees only. is there an option to submit a special request for this use case? Thank you in advance!

I read that iPadOS supports driverkit, and, presumably, the same serial FTDI UARTs as macOS. Has this been migrated to USB-C iPhones on iOS 18? After some searching, the developer doc is not clear, and web responses are contradictory. We are currently using it for a wired sensor option of our BlueTooth HR sensor. When it is used in wired config, the radios are turned off. This is important to some of our customers. Since Lightning MFI sensors are being discontinued with Apple killing Lightning, we would love to have an alternative for iOS. -- Harald

We have a macOS application which interacts with our USB and PCI devices to perform SCSI and NVME commands on them. We use IOUSBHost, IOUSBLib and IOKitLib for USB interface and have created a custom driver to interact with PCI devices. Is there a way we can implement a similar functionality for iOS as well if we connect the cards and readers using OTG?

Hello Everyone, I encountered an issue with PCI memory access in DriverKit. In my case, BAR0 is not available, but BAR1 is ready for use. Here’s the log output: !!! ERROR : Failed to get BAR0 info (error: 0xe00002f0). !!! BAR1 - MemoryIndex: 0x00000000, Size: 0x00040000, Type: 0 Issue Description When I initially wrote to BAR0 using memoryIndex = 0, it worked successfully: AME_Address_Write_32(pAMEData, pAMEData->memoryIndex, AME_HOST_INT_MASK_REGISTER, 0x0F); However, I mistakenly forgot to update memoryIndex to 1 for BAR1. Surprisingly, the write operation still succeeded. When I fixed memoryIndex = 1 for BAR1, the write operation no longer had any effect. There was no error, but the expected behavior did not occur. Relevant API (From IOPCIDevice.iig) /*! /*! * @brief Writes a 32-bit value to the PCI device's aperture at a given memory index. * @discussion This method writes a 32-bit register on the device and returns its value. * @param memoryIndex An index into the array of ranges assigned to the device. * @param offset An offset into the device's memory specified by the index. * @param data A 32-bit value to be written in host byte order. */ void MemoryWrite32(uint8_t memoryIndex, uint64_t offset, uint32_t data) LOCALONLY; Log Output: Writes to BAR0 (memoryIndex = 0) AME_Address_Write_32() called memoryIndex: 0, offset: 0x34, data: 0xf Wrote data 0xF to offset 52 AME_Address_Write_32() called memoryIndex: 0, offset: 0xa0, data: 0x1 Wrote data 0x1 to offset 160 AME_Address_Write_32() called memoryIndex: 0, offset: 0x20, data: 0xffffffff Wrote data 0xFFFFFFFF to offset 32 Writes to BAR1 (memoryIndex = 1) – No Response AME_Address_Write_32() called memoryIndex: 1, offset: 0x34, data: 0xf No confirmation log, no visible effect. Questions What should memoryIndex be set to for BAR1? The log shows "BAR1 - MemoryIndex: 0x00000000", but should I be using 1 instead? How can I verify if a write operation to BAR1 is successful? Is there a way to check if the memory region is actually writable? Should I use MemoryRead32() to confirm the written value? Any guidance would be greatly appreciated! Best Regards, Charles

Hi, trying to upgrade from macOS Sequoia 15.3.2 to 15.4 gives this error. Now I can not boot from internal drive of M1 Air 2020, because it restores 15.4, that does not boot. I can only boot from external USB SSD that has macOS 15.3.2. How I can install back 15.3.2 or alternatively newer macOS to internal drive? I only have one Mac, this M1 Air 2020. I have AppleAppleCare+ to 9/18/25. Remaining of error is attached here: Can't ignore lock validation @t8020dart.c:535 panic(cpu 2 caller 0x0): t8020dart 0xfffffdf053908000 (dart-dispext0): Can't ignore lock validation @t8020dart.c:535 Debugger message: panic Memory ID: 0x6 OS release type: Not set yet OS version: Not set yet Kernel version: Darwin Kernel Version 24.4.0: Wed Mar 19 21:12:54 PDT 2025; root:xnu-11417.101.15~1/RELEASE_ARM64_T8103 Fileset Kernelcache UUID: 2BBA525B95E0E6B962ECC44FC093AB57 Kernel UUID: 4E6CBD31-CD1E-3939-8A63-211A206AFA66 Boot session UUID: 3A34167D-2534-402F-9679-2CAD45F67CDA iBoot version: iBoot-11881.101.1 iBoot Stage 2 version: iBoot-11881.101.1 secure boot?: YES

I've made a dext and a user client that overrides IOUserSCSIPeripheralDeviceType00, with the object of writing device firmware to the driver. I can gain and relinquish exclusive access to the device, I can call UserReportMediumBlockSize and get back a sensible answer (512). I can build command parameters with the INQUIRY macro from IOUserSCSIPeripheralDeviceHelper.h and send that command successfully using UserSendCB, and I receive sensible-looking Inquiry data from the device. However, what I really want to do is send a WriteBuffer command (opcode 0x3B), and that doesn't work. I have yet to put a bus analyzer on it, but I don't think the command goes out on the bus - there's no valid sense data, and the error returned is 0xe00002bc, or kIOReturnError, which isn't helpful. This is the code I have which doesn't work. kern_return_t driver::writeChunk(const char * buf, size_t atOffset, size_t length, bool lastOne) { DebugMsg("writeChunk %p at %ld for %ld", buf, atOffset, length); SCSIType00OutParameters outParameters; SCSIType00InParameters response; memset(&outParameters, 0, sizeof(outParameters)); memset(&response, 0, sizeof(response)); SetCommandCDB(&outParameters.fCommandDescriptorBlock, 0x3B, // byte 0, opcode WriteBuffer command lastOne ? 0x0E : 0x0F, // byte 1 mode: E=save deferred, F = download and defer save 0, // byte 2 bufferID (atOffset >> 16), // byte 3 (atOffset >> 8), // byte 4 atOffset, // byte 5 (length >> 16), // byte 6 (length >> 8), // byte 7 length, // byte 8 0, // control, byte 9 0, 0, 0, 0, 0, 0); // bytes 10..15 outParameters.fLogicalUnitNumber = 0; outParameters.fBufferDirection = kIOMemoryDirectionOut; outParameters.fDataTransferDirection = kSCSIDataTransfer_FromInitiatorToTarget; outParameters.fTimeoutDuration = 1000; // milliseconds outParameters.fRequestedByteCountOfTransfer = length; outParameters.fDataBufferAddr = reinterpret_cast<uint64_t>(buf); uint8_t senseBuffer[255] = {0}; outParameters.fSenseBufferAddr = reinterpret_cast<uint64_t>(senseBuffer); outParameters.fSenseLengthRequested = sizeof(senseBuffer); kern_return_t retVal = UserSendCDB(outParameters, &response); return retVal; }

We've developed a PCIDriverKit driver for the capture card on macOS and have identified an issue: CreateMemoryDescriptorFromClient can only read data from the user space to the driver, but cannot write data back to the user. typedef struct _MWCAP_EDID_DATA { uint64_t size; uint64_t uaddr; } MWCAP_EDID_DATA; // App size_t xxx::GetEdid(void *buff, size_t size) { MWCAP_EDID_DATA edid; edid.size = size; edid.uaddr = (uint64_t)buff; kr = IOConnectCallStructMethod( connect, kUserGetEdid, &edid, sizeof(MWCAP_EDID_DATA), NULL, NULL ); // kr is 0. But However, the data in the buffer remains unchanged; // it does not reflect the EDID copied from the DEXT. return size; } // Driver MWCAP_EDID_DATA *edid = (MWCAP_EDID_DATA *)input; IOMemoryDescriptor *user_buf_mem = NULL; IOAddressSegment segment; segment.address = edid->uaddr; segment.length = edid->size; // We have verified that the values in edid->uaddr and edid->size are consistent with what was set by the application. ret = CreateMemoryDescriptorFromClient(kIOMemoryDirectionOutIn, 1, &segment, &user_buf_mem); if (ret != kIOReturnSuccess) { os_log(OS_LOG_DEFAULT, "Failed to create memdesc with error: 0x%08x", ret); break; } IOMemoryMap* user_buf_map = nullptr; ret = user_buf_mem->CreateMapping(0, 0, 0, 0, 0, &user_buf_map); if (ret != kIOReturnSuccess) { os_log(OS_LOG_DEFAULT, "Failed to create mapping with error: 0x%08x", ret); OSSafeReleaseNULL(user_buf_mem); break; } // ... fill the user_buf_map with edid data ... // For example: // memcpy(user_buf_map->GetAddress(), source_edid_data, edid->size); // At this point we have also verified the data in user_buf_map->GetAddress(), which matches our expectations. OSSafeReleaseNULL(user_buf_map); OSSafeReleaseNULL(user_buf_mem); Please help take a look, thank you!

I want to create a DriverKit driver and send vendor-specific commands to the storage device. Since UserClient is required to access the DriverKit driver from the app, I am attempting to implement it by referring to the following sample code. [Communicating between a DriverKit extension and a client app] I want to add com.apple.developer.driverkit.allow-any-userclient-access to the driver's Entitlements, submit a Capability Request on the developer site, and create a Provisioning Profile. However, I don't know how to enable com.apple.developer.driverkit.allow-any-userclient-access. I am entering the following information in the “Request a System Extension or DriverKit Entitlement” form. Which entitlement are you applying for? : DriverKit Entitlement Which DriverKit entitlements do you need? : UserClient Access UserClient Bundle IDs : [Bundle ID of MyDriver] Describe your apps and how they’ll use these entitlements. : testing sample code However, even if this request is accepted, I believe only MyDriver will be permitted. How can I grant access to all UserClients?

Note: This is an initial draft of a post attempting to describe the details of how to sign DEXTs. While you are free to post general questions or comments, please post any questions about your specific issues as a separate thread. The question of "how do I sign a DEXT" comes up a lot, so this post is my attempt to describe both what the problems and the best solutions are. So: The Problems: When DEXTs were originally introduced, the recommended development signing process required disabling SIP and local signing. There is a newer, much simpler process that's built on Xcode's integrated code-signing support; however, that newer process has not yet been integrated into the documentation library. In addition, while the older flow still works, many of the details it describes are no longer correct due to changes to Xcode and the developer portal. DriverKit's use of individually customized entitlements is different than the other entitlements on our platform, and Xcode's support for it is somewhat incomplete and buggy. The situation has improved considerably over time, particularly from Xcode 15 and Xcode 16, but there are still issues that are not fully resolved. To address #1, we introduced "development" entitlement variants of all DriverKit entitlements. These entitlement variants are ONLY available in development-signed builds, but they're available on all paid developer accounts without any special approval. They also allow a DEXT to match against any hardware, greatly simplifying working with development or prototype hardware which may not match the configuration of a final product. Unfortunately, this also means that DEXT developers will always have at least two entitlement variants (the public development variant and the "private" approved entitlement), which is what then causes the problem I mentioned in #2. The Automatic Solution: If you're using Xcode 16 or above, then Xcode's Automatic code sign support will work for most cases. The specific flow for that is: Change the code signing configuration to "Automatic". Add the capability using Xcode. If you've been approved for one of these entitlements, the one oddity you'll see is that adding your approved capability will add both the approved AND the development variant, while deleting either will delete both. This is a visual side effect of #2 above; however, aside from the exception described below, it can be ignored. Similarly, you can sign distribution builds by creating a build archive and then exporting the build using the standard Xcode flow. The Manual Solution: NOTE: Unfortunately, I'm not confident that the flow I described below actually works today (12/5/2026). I'm leaving the information below as a useful starting point, but I'm afraid this case my require resorting to command line code signing. The approach above works for all DriverKit Entitlements, with two exceptions: USB DriverKit PCI DriverKit Both of those cases involve customized entitlement values, which then creates problems when attempting to distribute builds. Note that this is specifically about build distribution, NOT development builds. All development builds should use the flow above. The solution for these two cases is manual code signing with the export flow. Here is exactly what the flow looks like: Select the build you've archived in the Xcode Organizer and select "Distribute App". Choose "Custom" from the set of distribution methods. Choose the type of distribution (App Store or Developer ID). Choose whether to Upload or Export. Choose "Manually manage signing". Provide a profile for each of the objects that make up your app bundle. See the "Provisioning Profiles" section of Account Help for detailed instructions on that process. Continue through the rest of the process to finish build creation. Finally, a note about both of the processes above. Quoting myself: "One thing to be aware of here is that Xcode has a "bias" in the way it presents codesign errors where it assumes the Entitlement.plist is "correct" and the profile is "wrong". However, in practice that's basically "never" the case with DriverKit entitlements and tends to lead to a lot of "flailing" trying to somehow "fix" the provisioning profile..." __ Kevin Elliott DTS Engineer, CoreOS/Hardware

How does VMWare access USB devices without have any specifics of the USB device? Does it use the same profile/entitlement process or does it take a different approach?

Investigating a kernel panic, I discovered that Apple Silicon Panic traces are not working with how I know to symbolicate the panic information. I have not found proper documentation that corrects this situation. Attached file is an indentity-removed panic, received from causing an intentional panic (dereferencing nullptr), so that I know what functions to expect in the call stack. This is cut-and-pasted from the "Report To Apple" dialog that appears after the reboot: panic_1_4_21_b.txt To start, I download and install the matching KDK (in this case KDK_14.6.1_23G93.kdk), identified from this line: OS version: 23G93 Kernel version: Darwin Kernel Version 23.6.0: Mon Jul 29 21:14:04 PDT 2024; root:xnu-10063.141.2~1/RELEASE_ARM64_T8122 Then start lldb from Terminal, using this command: bash_prompt % lldb -arch arm64e /Library/Developer/KDKs/KDK_14.6.1_23G93.kdk/System/Library/Kernels/kernel.release.t8122 Next I load the remaining scripts per the instructions from lldb: (lldb) settings set target.load-script-from-symbol-file true I need to know what address to load my kext symbols to, which I read from this line of the panic log, after the @ symbol: com.company.product(1.4.21d119)[92BABD94-80A4-3F6D-857A-3240E4DA8009]@0xfffffe001203bfd0->0xfffffe00120533ab I am using a debug build of my kext, so the DWARF symbols are part of the binary. I use this line to load the symbols into the lldb session: (lldb) addkext -F /Library/Extensions/KextName.kext/Contents/MacOS/KextName 0xfffffe001203bfd0 And now I should be able to use lldb image lookup to identify pointers on the stack that land within my kext. For example, the current PC at the moment of the crash lands within the kext (expected, because it was intentional): (lldb) image lookup -a 0xfffffe001203fe10 Which gives the following incorrect result: Address: KextName[0x0000000000003e40] (KextName.__TEXT.__cstring + 14456) Summary: "ffer has %d retains\n" That's not even a program instruction - that's within a cstring. No, that cstring isn't involved in anything pertaining to the intentional panic I am expecting to see. Can someone please explain what I'm doing wrong and provide instructions that will give symbol information from a panic trace on an Apple Silicon Mac? Disclaimers: Yes I know IOPCIFamily is deprecated, I am in process of transitioning to DriverKit Dext from IOKit kext. Until then I must maintain the kext. Terminal command "atos" provides similar incorrect results, and seems to not work with debug-built-binaries (only dSYM files) Yes this is an intentional panic so that I can verify the symbolicate process before I move on to investigating an unexpected panic I have set nvram boot-args to include keepsyms=1 I have tried (lldb) command script import lldb.macosx but get a result of error: no images in crash log (after the nvram settings)

I have two different USB devices with different vendor IDs I would like to connect to. I submitted two separate requests for the com.apple.developer.driverkit.transport.usb entitlement for each vendor ID. However I am noticing the provisioning profile only has one of the vendor IDs. How do I submit a request for the USB Transport entitlement to support more than one vendor ID? I'm new to writing a DriverKit driver, so is this even possible?