Hi All, I’m working on a football live score app with Dynamic Island support, using iOS 18 Broadcast Notifications for Live Activities. Our workflow is: We use the Push-to-Start token to initiate the Live Activity. For updates, we use the Channel ID. Start, update, and end events for Live Activities are all handled via remote notifications. We tested on 3-4 devices simultaneously, but noticed inconsistent UI updates: some devices update properly while others do not, even when using the same Channel ID. Checking the notification console dashboard, last week we had around 1,397 notifications published but only 555 delivered — a significant discrepancy. All devices are active and connected to reliable internet, so we’re unsure why delivery rates are so low. Additional details: For the start event, we set notification priority to 10. For updates, we lowered priority to 5 per Apple’s documentation, to reduce throttling. This adjustment improved the situation compared to sandbox testing where all notifications were priority 10. Despite this, during weekend matches, we observed a drastic drop: out of 140 published notifications, only 2 were delivered. This large delivery gap risks missing critical update deadlines in our app. Could anyone help us understand what might be causing this and how to improve notification delivery reliability? Thanks in advance!

Pretty much the title. I am a noob in apple app development and currently starting it out. I got stuck in this. Can anyone let me know that how can i generate the token for starting live activity in terminated state? I have tried multiple times to find that this one is not working in terminated state. How can I overcome this? Is there any solution or workaround?

I know for start events, sending the timestamp isn't required. So that's easy. However when I'm testing Live Activity using the Apple Push Notification Console. A lot of times I just need to copy/paste the payload and resend it again. But then the timestamp field needs to get updated each time, because if it's from a time in the past, then it won't trigger. This requires me to have to use an EPOCH converter to find the right time and then copy/paste it. Is there a better solution to this? I know I can use curl, but that is not in the scope of my question.

I am building a widget that supports 2 different widget kinds, each supporting systemSmall, systemMedium, and systemLarge size families. My widget does download and display images so I expect memory usage to be on the higher end, but in debugging some memory issues, I notice that when I build my widget scheme to a physical device, things start off reasonable at ~12MB of memory usage. But as I change the widgets intent, add the other widget kind, or add different widget size families, this memory usage grows until it ultimately hits the 30MB cap. My question is, is the 30MB memory limit spread across all my supported widget kinds/sizes? Or does each individual widget get its own 30MB cap? i.e., if I have systemMedium Widget A and systemLarge Widget B, are they sharing that 30MB memory limit?

Hi Apple team, I'm experiencing a persistent issue with writing to UserDefaults from a widget extension on iOS. Here's the situation: I've set up an App Group: group.test.blah The main app has the correct entitlement and can read/write from UserDefaults(suiteName:) using this group successfully. I can read the value written by the app from the widget (e.g., "testFromApp": "hiFromApp"). The widget extension has the same App Group enabled under Signing & Capabilities. The provisioning profile reflects the App Group and the build installs successfully on a real device. The suite name is correct and matches across both targets. I’ve confirmed via FileManager.default.containerURL(...) that the app group container resolves properly. When I try to write from the widget extension like this let sharedDefaults = UserDefaults(suiteName: "group.test.blah") sharedDefaults?.set("hiFromWidget", forKey: "testFromWidget") ...I get this error in the console: Couldn't write values for keys ( testFromWidget ) in CFPrefsPlistSource<0x1140d2880> (Domain: group.test.blah, User: kCFPreferencesCurrentUser, ByHost: No, Container: (null), Contents Need Refresh: No): setting preferences outside an application's container requires user-preference-write or file-write-data sandbox access Questions: What could still cause the widget extension to lack write access to the app group container, even though it reads just fine? Are there any internal sandboxing nuances or timing-related issues specific to Live Activity widgets that could explain this? Is this a known limitation or platform issue?

I am currently developing an interactive widget, but an AppIntent issue blocked me for 2 days. I have an AppIntent named TimerActionIntent, which has two parameters: TimerType and TimerAction. Here is the code: import AppIntents enum TimerType: Int, CaseIterable, AppEnum, AppEntity { case sleep case feeding static let typeDisplayRepresentation: TypeDisplayRepresentation = "Timer Type" static let caseDisplayRepresentations: [TimerType : DisplayRepresentation] = [ .sleep: "Sleep", .feeding: "Feeding" ] } enum TimerAction: Int, CaseIterable, AppEnum, AppEntity { case start case pause case stop static let typeDisplayRepresentation: TypeDisplayRepresentation = "Timer Action" static let caseDisplayRepresentations: [TimerAction : DisplayRepresentation] = [ .start: "Start", .pause: "Pause", .stop: "Stop" ] } struct TimerActionIntent: AppIntent { static let title: LocalizedStringResource = "Operate a Log Timer" @Parameter(title: "Timer", default: .sleep) var timerType: TimerType @Parameter(title: "Action", default: .start) var action: TimerAction static var isDiscoverable: Bool = false static var openAppWhenRun: Bool = false init() {} init(timerType: TimerType, action: TimerAction) { self.timerType = timerType self.action = action } func perform() async throws -> some IntentResult { // perform the action Self.openAppWhenRun = state == .stopped } return .result() } } I can't execute the AppIntent if using the following code: Button(intent: TimerActionIntent(timerType: .sleep, action: .start)) { // button view } // or let intent = TimerActionIntent() intent.timerType = timerType intent.action = .start Button(intent: intent) { // button view } and only execute when initialize TimerActionIntent without any parameters and @Parameter has the default value. e.g. Button(intent: TimerActionIntent()) { // button view } I have some logs in the Console app: default 17:51:27.626382+0800 linkd Accepting XPC connection from PID 39255 for service "com.apple.linkd.registry" default 17:51:27.637511+0800 WidgetsExtension Beginning PerformAction <<SB:788D850BBBC5>> default 17:51:27.637540+0800 WidgetsExtension Beginning InitializeAction <<SB:ACBC7A27CCBF>> default 17:51:27.637556+0800 WidgetsExtension [InitializeAction <<N:ACBC7A27CCBF>>] Found TimerActionIntent matching TimerActionIntent registered with AppManager default 17:51:27.637725+0800 WidgetsExtension Prepared timerType to TimerType(TimerType/0)) default 17:51:27.637744+0800 WidgetsExtension Prepared action to TimerAction(TimerAction/0)) default 17:51:27.637772+0800 WidgetsExtension Ending InitializeAction <<SE:ACBC7A27CCBF>> default 17:51:27.637795+0800 WidgetsExtension Beginning ResolveParameters <<SB:6C7CA02308AD>> default 17:51:27.639807+0800 WidgetsExtension Building resolver for parameter timerType<TimerType> = TimerType/0 default 17:51:27.640160+0800 WidgetsExtension Building resolver: EntityIdentifier → TimerType:TimerActionIntent:timerType default 17:51:27.640202+0800 WidgetsExtension Ending ResolveParameters <<SE:6C7CA02308AD>> default 17:51:27.640221+0800 WidgetsExtension Beginning NeedsDisambiguation <<SB:8E482F9CCCB0>> default 17:51:27.641328+0800 WidgetsExtension Ending NeedsDisambiguation <<SE:8E482F9CCCB0>> default 17:51:27.641344+0800 WidgetsExtension Ending PerformAction <<SE:788D850BBBC5>> error 17:51:27.642316+0800 chronod Perform action connection operation completed with error: Error Domain=LNActionExecutorErrorDomain Code=2010 "(null)" error 17:51:27.642774+0800 chronod Operation `<LNPerformActionConnectionOperation: 0x600002c4a180, identifier: F8FB77C5-7F8A-4670-BB8C-465DE4EAB6B8>` error Error Domain=LNActionExecutorErrorDomain Code=2010 "(null)" default 17:51:27.643358+0800 linkd Invalidated XPC connection from PID 39255 for service "com.apple.linkd.registry" I can't find any details about the error " Error Domain=LNActionExecutorErrorDomain Code=2010 "(null)"" The environment: Xcode: 16.4/26 beta 5 iOS: iOS Simulator 18.5, iOS Simulator 26, iPhone 16 Pro Max 18.6 macOS 15.6 Can anyone help me, please!

I'm developing an app which will show the driver ETA and rendering the progress bar of the current ETA. Intuitively the backend server sends the push notification every 3 seconds through firebase cloud message service to APNS so that the device can refresh the dynamic island smoothly. But the live activity doesn't refresh as frequently as the backend service does. It should refresh every 3 seconds but it turns out like refresh 30 ~ 60 seconds, sometimes it didn't refresh at all. any body facing the same?

The docs are conflicting. https://developer.apple.com/documentation/activitykit/starting-and-updating-live-activities-with-activitykit-push-notifications#End-the-Live-Activity-with-a-custom-dismissal-date says: When you end a Live Activity, by default the Live Activity appears on the Lock Screen for up to four hours after it ends to allow people to glance at their phone to refer to the latest information. However here it says: https://developer.apple.com/documentation/activitykit/displaying-live-data-with-live-activities#Understand-constraints A Live Activity can be active for up to eight hours unless its app or a person ends it before this limit. After the eight-hour limit, the system automatically ends the Live Activity, and immediately removes it from the Dynamic Island. However, the Live Activity remains on the Lock Screen until a person removes it or for up to four additional hours before the system removes it — whichever comes first. As a result, a Live Activity remains on the Lock Screen for a maximum of 12 hours. So is it 4 hrs OR '8 for Dynamic Island vs 12 for Lock Screen'?

Hi everyone, I'm using an app group to share data between iOS and it's watch companion app. I ensured that is has the same identifier in Signing &amp; Capabilities and in the .entitlements files. Here is the UserDefaults part: class UserDefaultsManager { private let suitName = "group.com.sanjeevbalakrishnan.Test" public func saveItems(_ items: [ItemDTO]) { print("Save \(items.count) items to shared defaults") let defaults = UserDefaults(suiteName: suitName) let data = try? JSONEncoder().encode(items) defaults?.set(data, forKey: "items") } public func loadItems() -&gt; [ItemDTO] { let defaults = UserDefaults(suiteName: suitName) print(defaults) guard let data = defaults?.data(forKey: "items") else { print("watchOS received data is empty") return [] } let items = [ItemDTO].from(data: data) print("Load \(items.count) items from user defaults") return items } } For testing I called loadItems after saveItems on iOS app and it returned items. However, on watchOS app it always returns empty array. What do I need to consider? Thanks. Best regards Sanjeev

Hi there, I'm using WCSession to communicate watchOS companion with its iOS app. Every time watch app becomes "active", it needs to fetch data from iOS app, which works e.g. turning my hand back and forth. But only when the app is opened after it was minimised by pressing digital crown, it didn't fetch data. My assumption is that scenePhase doesn't emit a change on reopen. Here is the ContentView of watch app: import SwiftUI struct ContentView: View { @EnvironmentObject private var iOSAppConnector: IOSAppConnector @Environment(\.scenePhase) private var scenePhase @State private var showOpenCategories = true var body: some View { NavigationStack { VStack { if iOSAppConnector.items.isEmpty { WelcomeView() } else { ScrollView { VStack(spacing: 10) { ForEach(iOSAppConnector.items, id: \.self.name) { item in ItemView(item: item) } } } .task { DispatchQueue.main.asyncAfter(deadline: .now() + 0.5) { loadItems() } } .onChange(of: scenePhase, initial: true) { newPhase, _ in if newPhase == .active { loadItems() } } } fileprivate func loadItems() -> Void { if iOSAppConnector.items.isEmpty { iOSAppConnector.loadItems() } } } What could be the issue? Thanks. Best regards Sanjeev

When running application after installation I get a value in pushTokenUpdates and also the call to pushToStartTokenUpdates returns with the token value. But, if I kill the app and restart it again, there is no value in pushTokenUpdates and the call to pushToStartTokenUpdates does not return. Am I suppose to use the push to start token from the previous application run? is there a different solution?

Hello everyone, I'm developing an app for iOS 18 using SwiftData, with iCloud synchronization enabled. My app also includes an interactive widget that allows users to mark tasks as complete, similar to Apple's Reminders widget. I'm facing a specific issue with how iCloud sync is triggered when changes are made from the widget. My Setup: Xcode 16 Swift 6 / iOS 18 SwiftData with iCloud Sync enabled. An interactive widget using App Intents to modify the SwiftData model. What's working correctly: App to Widget (Same Device): If I mark a task as complete in the main app, the widget on the same device updates instantly. Widget to App (Same Device): If I mark a task as complete using the interactive widget, the main app on the same device reflects this change immediately. App to App (Across Devices): If I make a change in the app on my iPhone, it syncs correctly via iCloud and appears in the app on my iPad. The Problem: The synchronization issue occurs specifically when an action is initiated from the widget and needs to be reflected on other devices, or when a change from another device needs to be reflected in the widget. Widget Change Not Syncing to Other Devices: If I mark a task as complete in the widget on my iPhone, the change does not sync to my iPad. The task on the iPad only updates after I manually open the main app on the iPhone. Remote Change Not Syncing to Widget: Similarly, if I mark a task as complete in the app on my iPad, the widget on my iPhone does not update to show this change. The widget only refreshes with the correct state after I open the main app on the iPhone. It seems that the widget's AppIntent correctly modifies the local SwiftData store, but this action isn't triggering the necessary background process to push the changes to iCloud. The sync only seems to happen when the main app, with its active ModelContainer, is brought to the foreground. My goal is for any change made in the widget to be reflected across all of the user's devices in near real-time, without requiring them to launch the main app to initiate the sync. Is there a specific API I need to call from my AppIntent to force a SwiftData sync, or a project capability I might be missing to allow the widget extension to trigger iCloud pushes? Any help or guidance would be greatly appreciated. Thank you!

Hello, I have an app in AppStore "Counter Widget". https://apps.apple.com/app/id1522170621 It allows you to add a widget to your homescreen/lockscreen to count anything. Everything works fine except for one scenario. iOS 18+ I create 2 or more widgets for one counter. For example, medium and small widgets. I click on the widget button to increase or decrease the value. The button in the widget uses Button(intent: AppIntent) to update the value and calls WidgetCenter.shared.reloadAllTimelines() to update the second widget for the same counter. For iOS 18 in this particular scenario, you don't even have to call the WidgetCenter.shared.reloadAllTimelines(). iOS already knows that there is a widget with the same INIntent settings and will update it itself. Both widgets are updated and show the new value. Everything is correct. Now on the homescreen I open the widget configuration for one of the widgets to change the INIntent for the widget. For example, i change the background to wallpaper. This is just a skin for the widget, and the widget is associated with the same counter value as before. As in (2), I click the widget button to increase or decrease the value. But now only one widget is updated. iOS ignores my call to WidgetCenter.shared.reloadAllTimelines() and does not update the second widget connected to the same counter. As I found, iOS, when I call WidgetCenter.shared.reloadAllTimelines() from the widget itself, updates other widgets only if INIntent is absolutely equal for them. Overriding isEqual for them did not help. That is, I cannot specify which fields from my INIntent can be ignored during such an update and consider that widgets are equal and need to be updated. Obviously iOS make this compare outside my code. The main problem is that when the user adds a widget to the lock screen and increases and decreases the value there. After that, he opens the home screen and the widget there is not synchronized with the value from the widget on the lock screen. How to solve this problem?

Hi everyone, I’m working on implementing Live Activities in my app, and I’ve encountered an issue where the Live Activity updates work intermittently when the app is in the background. Sometimes they update correctly, but at other times, they don’t update at all, even though they should be running in the background. However, when the app is brought to the foreground, the updates happen correctly. A few things I’ve checked: The app is using ActivityKit to update the Live Activity with Activity.update(). I’ve enabled the necessary background modes in the Capabilities section. Is there a possibility that I’m hitting the system budget limit while experiencing this issue? If this is a limitation, how can I avoid it or manage this situation? Has anyone else faced this issue? Any advice or potential solutions would be greatly appreciated! Thank you!

I've been working on a new application and beta testing with TestFlight. When iOS 18.3 came out, my widgets stopped working due to using too much memory. I've been trying to debug for a while now, but not making much progress. Now that iOS 18.4 is out, I noticed the widgets are working again. I'm wondering if there was some change made in iOS 18.3 that was rolled back in iOS 18.4 that I'm not seeing in the iOS Release Notes etc? I haven't seen much in the Developer Forums, either. My concern is that perhaps Apple decided to make the 30MB Widget memory limit a "hard" limit, but then rolled it back, perhaps temporarily, so I'd like some clarity on the situation if possible. Otherwise, I did notice that it seemed as if all of my widgets were loaded at once, even if only one widget was installed, this boosting the memory usage significantly. If so, that might indicate that a bug was fixed in the Widget Provider system? In any case, I'd appreciate any information or advice on this. Thanks!

Live Activity Start Token not generating after certain days of usage. We have implemented Live Activity feature where the initial activity is launched by our backend. But to start that first live activity I need push to start token which is generating for few days but all of sudden after certain days it stops generating. Currently we are in development phase so we test it on multiple devices and multiple time we are doing install and uninstall. STEPS TO REPRODUCE Install the app Start token gets generated which is sent to our server After certain duration server sends the first live activity using that token user opens the app then we receive the updated token and send that token to server server uses that updated token to further update the live activity. All this works fine. But after a week of usage we are observing that we stop getting start token from APNS. Not sure where exactly the thing is breaking. We have tried with different devices and different bundle identifiers but behaviour is same for all. func generateStartToken() { Task.detached { [weak self] in guard let self else { return } await self.observeActivityPushTokenAndState() for await data in ActivityKit.Activity<LiveActivityAttribute>.pushToStartTokenUpdates { let token = data.map { String(format: "%02x", $0) }.joined() print("Activity Start token: ", token) } } } func observeActivityPushTokenAndState() { Task.detached { for await activity in ActivityKit.Activity<LiveActivityAttribute>.activityUpdates { Task { for await tokenData in activity.pushTokenUpdates { let updatedToken = tokenData.map { String(format: "%02x", $0) }.joined() print("Activity Update token: ", updatedToken) } } Task { for await content in activity.contentUpdates { let updatedContent = content.state print("Activity Updated: ", updatedContent) } } } } }

I am building a widget with configurable options (dynamic option) where the options are pull from api (ultimately the options are return from a server, but during my development, the response is constructed on the fly from locally). Right now, I am able to display the widget and able to pull out the widget configuration screen where I can choose my config option . I am constantly having an issue where the loading the available options when selected a particular option (e.g. Category) and display them on the UI. Sometime, when I tap on the option "Category" and the loading indicator keeps spinning for while before it can populate the list of topics (return from methods in NewsCategoryQuery struct via fetchCategoriesFromAPI ). Notice that I already made my fetchCategoriesFromAPI call to return the result on the fly and however the widget configuration UI stills take a very long time to display the result. Even worst, the loading (loading indicator keep spinning) sometime will just kill itself after a while and my guess there are some time threshold where the widget extension or app intent is allow to run, not sure on this? My questions: How can I improve the loading time to populate the dynamic options in widget configuration via App Intent Here is my sample code for my current setup struct NewsFeedConfigurationIntent: AppIntent, WidgetConfigurationIntent { static let title: LocalizedStringResource = "Configure News Topic Options" static let description = IntentDescription("Select a topic for your news.") @Parameter(title: "Category", default: nil) var category: NewsCategory? } struct NewsCategory: AppEntity, Identifiable { let id: String let code: String let name: String static let typeDisplayRepresentation: TypeDisplayRepresentation = "News Topic" static let defaultQuery = NewsCategoryQuery() var displayRepresentation: DisplayRepresentation { DisplayRepresentation(title: LocalizedStringResource(stringLiteral: name)) } } struct NewsCategoryQuery: EntityQuery { func entities(for identifiers: [NewsCategory.ID]) async throws -> [NewsCategory] { let categories = fetchCategoriesFromAPI() return categories.filter { identifiers.contains($0.id) } } func suggestedEntities() async throws -> [NewsCategory] { fetchCategoriesFromAPI() } } func fetchCategoriesFromAPI() -> [NewsCategory] { let list = [ "TopicA", "TopicB", "TopicC", ....... ] return list.map { item in NewsCategory(id: item, code: item, name: item.capitalized) } }

I would like to add a Live Activity to my app, but unfortunately I always get an error message. When I go into the Identifiers via the Developer Portal and look at my app, there is no Activity Kit or Live Activity in the Capabilites that I could activate. In XCode I don't see the option for Signing & Capabilities either... Can anyone help me how to add this correctly? Thanks in advance!

I'm developing a widget with WidgetKit, and I'm having a problem: I need to click on an image, and when I click it triggers a network request, the image automatically rotates clockwise, and when the network ends, the image automatically stops rotating. How to do that? My current idea is to click on the image and await the call to the network request. Should Toggle be used for the control corresponding to the picture? Because Toggle has two states. Then there is how to do image rotation, did not find support API.

Device: iPhone 16 Pro iOS version: 18.3.2 The calendar widget (on home screen) is displaying "No more events today" even though there is an appointment scheduled later in the evening on the same day. I have looked through all the settings and nothing seems to work. How do I get it to display events that are on the calendar for rest of the day today. It does correctly display events that are upcoming tomorrow and next week. Thanks, -Harry