productsign Command Appears to Succeed but Package has No Valid Signature Category: Security, macOS, Code Signing Question: productsign command, when signing a PKG created with productbuild, appears to succeed with a success message (Wrote signed product archive to ...) but spctl verification results in rejected, source=no usable signature, indicating that the signature was not actually applied. Details: Goal: To sign a distribution package created with productbuild using a Developer ID Installer certificate. Certificate Used: Developer ID Installer: [Company Name] ([Team ID]) This certificate was issued by Previous Sub-CA and is not the latest G2 Sub-CA recommended by Apple. We cannot create a new G2 Sub-CA certificate as we have reached the limit of 5. productsign Command: productsign --sign "Developer ID Installer: [Company Name] ([Team ID])" [input.pkg] [output.pkg] productsign Output: Wrote signed product archive to [output.pkg] (Appears as a success message). spctl Signature Verification: spctl -a -vv [output.pkg] Result: rejected, source=no usable signature Notarization Service Results (Behavioral difference between Macs): On Mac A, the submission status was Accepted. On Mac B, the status was Invalid, with the notarization log message being The binary is not signed.. Troubleshooting Steps Taken: We attempted to sign both component and distribution packages with productsign, and in both cases, the signature was not recognized by the system. We skipped productsign and relied on the notarization service's auto-signing, but the notarization log still reported The binary is not signed., and the notarization failed. We have confirmed that the certificate and private key are properly associated in Keychain Access. My Questions: Given that we are using an older Previous Sub-CA certificate and cannot create a new one, why does productsign appear to succeed when the signature is not being applied? What could cause the behavioral difference where notarization is Accepted on Mac A but Invalid on Mac B? Is this a known issue with Apple's tools, or is it possibly caused by the specific structure of our PKG? What is the recommended workflow or debugging method to successfully sign and notarize a PKG under these circumstances? Thank you for your assistance

trying to deploy the LotBot app to my physical device, rtd2, which is listed as a device in the App Developer Portal. when I create a provision file it is always for W246SX52AS, as seen in the developer portal, but from Xcode I am showing a app id of "Apple Development: Richard Dukes (86537MF8N2)". Message: I am unable to create a "Apple Development: Richard Dukes (W246SX52AS)" so I may deploy to the device and the App Store. I have signed out and back in to Xcode with my account but when creating the profile it is always the 86537MF8N2. 95E07D345D31D45E4589FA7EA6FDF161E079C100 "Apple Distribution: Richard Dukes (W246SX52AS)" 5AC76CE9331F80AE953C4C76FC21DE5C2416293E "Apple Development: Richard Dukes (86537MF8N2)" How can I get Xcode to use W246SX52AS? I have these help tickets open as well. case ID is 102678952862 case ID is 102678950460 I have been fighting this for a while. Please help me figure out to get this resolved.

Hello, I’m having trouble enabling Background Location updates on my iOS app. Xcode: 26.0 beta Team: Individual Developer Program (paid, activated recently) Device: iPhone (physical device, registered and provisioned) Problem When building to device, I get the error: Provisioning profile "iOS Team Provisioning Profile: com.mybundle.id" doesn't include the com.apple.developer.background-modes entitlement. Automatic signing failed. On the simulator the build succeeds, but on device the signing fails unless I remove the background-modes entitlement from .entitlements. What I tried Enabled Background Modes → Location updates in Signing & Capabilities (UI only). Info.plist contains UIBackgroundModes = location and the required NSLocation…UsageDescription keys. Cleaned Derived Data, removed cached provisioning profiles (~/Library/Developer/Xcode/UserData/Provisioning Profiles). Changed Bundle Identifier to force regeneration of provisioning profiles. Deleted and recreated provisioning profiles from Xcode. Tried both with and without manual .entitlements edits. Current status Provisioning profile shows only App Groups, In-App Purchase, Push Notifications. Entitlements section in the downloaded profile is missing com.apple.developer.background-modes. As a result, background location cannot be enabled on device. Question Is this a known issue with Xcode 16/26 beta or with Individual Developer accounts? How can I get com.apple.developer.background-modes included in my provisioning profile so that location tracking continues while the screen is locked? Thank you.

Hi! We are trying to request the SensorKit entitlement (com.apple.developer.sensorkit.reader.allow) for a research app we’re working on. When we go to Apple Developer → Certificates, Identifiers & Profiles → Identifiers, we see the SensorKit capability listed under "Capability Requests", but: There’s no form or button to submit the request, unlike with other capabilities. We tested this using an Account Holder role, and also tried requesting other capabilities — which do show the form correctly, so this seems to be an issue specific to SensorKit. We’d appreciate any guidance on: Whether this is a known issue with the SensorKit request flow. If there’s an alternative way to request this capability while the form is unavailable. Thanks in advance!

Hi, I am experiencing an issue where Xcode displays a "Provisioning profile doesn't support the capability" error for the User Assigned Device Name capability, despite it being approved by Apple and visible in our provisioning profile on the Developer Portal. Background We have completed and submitted the required capability request form to Apple for the User Assigned Device Name capability and received approval. The capability appears correctly in our provisioning profile on the Apple Developer Portal and shows among the enabled capabilities alongside other standard capabilities like In-App Purchase and Push Notifications. Issue However, Xcode consistently displays the error message when trying to enable the User Assigned Device Name capability in our project settings, preventing successful builds with this functionality. Troubleshooting Steps Attempted We have tried multiple troubleshooting steps including: Regenerating provisioning profiles Performing clean builds Clearing DerivedData Manually installing profiles Adding the com.apple.developer.device-information.user-assigned-device-name entitlement manually to our entitlements file Toggling automatic signing on and off Environment Details Xcode Version: 16.4 (16F6) iOS Deployment Target: iOS 13 Profile Type: Distribution provisioning profile Capability: User Assigned Device Name Despite the capability being approved by Apple and visible in our provisioning profile, Xcode does not recognize it. This appears to be a synchronization issue between the Apple Developer Portal and Xcode's capability validation system. Has anyone encountered similar issues with recently approved capabilities, specifically the User Assigned Device Name capability? Could you please provide guidance on how to resolve this capability recognition issue? Any suggestions for resolving this discrepancy between the Developer Portal and Xcode would be greatly appreciated.

Hello, when building and signing my application in a Github actions workflow, I am facing an issue on the latest version of xCode (16.4). This issue is resolved by downgrading to 16.3. My CI/CD pipeline is running headless and installing provisioning profile to ~/Library/MobileDevice/Provisioning Profiles.

Hello, Recently our team requested the "Notification (NSE) filtering" capability. Our request was rejected but we sent a new request with a more detailed explanation of our need. However if we go check the status of the request in the Capability Requests tab the status is "No requests". We sent the new request yesterday. Is it even possible to request a capability after a rejected request? We really need the capability and the absence of it is blocking our progress.

Hi, My understanding from this information: " https://developer.apple.com/support/certificates/ iOS Distribution Certificate (in-house, internal-use apps) Users will no longer be able to run apps that have been signed with this certificate. You must distribute a new version of your app that is signed with a new certificate. " is that even if I re-sign the app with a new Provisioning Profile based on a new Distribution Certificate the apps will stop working. I need to re-build my apps with a new Distribution certificate+Provisioning profile, when distributing in-house, right? I can see that the apps continue to function when I re-sign them with a new Provisioning Profile, but according to the information above they will stop working the day (day after) the Distribution certificate they were built with expires. /Rikard

Hi, hoping someone can help here. I recently updated my Mac to macOS 15 (Tahoe) and am using Xcode 15+ (possibly 16). I’m working on a Flutter app and testing on a real iPhone device. Here's the situation: I’m using the free Apple Developer account. My signing certificate and provisioning profile both show as valid and active in Keychain and says "signing..." in Xcode. When I build and run the app from Xcode, it works completely fine on a simulator. But when I try to run the same project from VS Code using flutter run, whether on an simulator phone or my personal iphone, I get a code signing error, specifically: Failed to codesign Flutter.framework with identity... I believe the app is set to use the correct Team ID because it says my name and (team) (my team ID isBDKUKWVRBY), and I can see my certificate in Keychain under "My Certificates". What I’ve already tried: flutter clean pod install / pod update Manually selecting my team in Xcode Signing settings Restarting my machine and VS Code Confirming the same project builds on other machines Verified provisioning profile is assigned to the project in Xcode deleting and recreating a certificate I have even had AI inside VS code take a shot at it and that couldn't fix either My question: Why would VS Code / Flutter not be able to use the same certificate and signing setup that works in Xcode? Is this an issue with Flutter tooling on macOS 15, or do I need to reconfigure signing differently now? Any suggestions or fixes would be greatly appreciated!

I’m running into an issue where the com.apple.developer.storekit entitlement is not being included in provisioning profiles, even though my App ID is properly configured for In-App Purchase. Entitlements file: explicitly includes <key>com.apple.developer.storekit</key> <true/> Capability: In-App Purchase is enabled in the Apple Developer Portal and shows as “Enabled.” What I’ve tried: Automatic signing in Xcode → profiles generated, but missing com.apple.developer.storekit Manual signing → deleted and recreated provisioning profiles multiple times; entitlement still missing. Waited several hours for possible propagation. Verified that my in-app purchase products are set up correctly. Error message: Provisioning profile "iOS Team Provisioning Profile: zu.inniu" doesn't include the com.apple.developer.storekit entitlement Question: Has anyone else encountered this? Is there a step I might be missing to get StoreKit entitlements included in provisioning profiles, or could this be a backend issue that needs escalation through Apple DTS? This is blocking me from building my app for physical devices, so any guidance would be greatly appreciated. Thanks in advance!

I have certificates in my xcode>settings>account>manage certificates that I cannot get rid of. I know that they are linked to certificates in developer.apple.com but I've removed them from there and they persist in xcode. I have one that says "Not in Keychain", which is true. I deleted all the keychains related to these accounts in an attempt to fix something. I also have ones that say things like "Missing Private key" Our setup is that we have one main account "Company Inc." which I am setup to be an Admin in. I created a certificate under my credentials and added it to my keychain and showed up properly in xcode but I still have the other ones. HOW DO I REMOVE THEM :sob:

Starting Point I recently transferred an app from an old to a new developer account. The transfer itself went smoothly with the app using the following capabilities: CoreData, CloudKit, Push Notifications, In-App Purchases Keychain is not used After completing the app transfer, I worked on a new update. For this, I set the new developer account as the development team of the project in Xcode. However, as soon as I try to install the new version locally on my physical test device, I get the following error message: application-identifier entitlement string ({new_team_id}.{bundle_id}) does not match installed application's application-identifier string ({old_team_id}.{bundle_id}); rejecting upgrade.` (Note: The test device has the latest production version installed, which was still published by the old developer account. The update can be installed without any problems if no previous version is installed. {new_team_id}, {old_team_id} and {bundle_id} are a substitute for the original content.) What I've tried so far I found a Technical Note on this topic and followed the steps suggested. However, the Apple Support wasn't able to provide me with the required Special Provisioning Profile. That's why I tested a different approach with a dummy application: I have completed an update as described above (new developer account selected as development team). Next, I uploaded it to App Store Connect and published it as a new version. I received the following warning during the upload process, but ignored it since I don't use the keychain: At first glance, the publication process appears to have gone smoothly. While the update caused the above error during local testing, the update via the App Store went smoothly. As the latest production version has now also been published from the new Apple Developer Account, further updates can now also be tested locally on a physical device without any problems. Questions Why is it that the update causes an error when tested locally, but works without problems via the App Store? Can this approach also be used without concern for an app with a large active user base, which also uses the capabilities described above (in particular CoreData & CloudKit) without causing problems? Thanks a lot for your support in advance!

I need to get the distribution certificate SHA-1 and public key in order to apply an official filing, but the certificate in deveoper account page is not downloadble. could someone help me on this? how to download certicate or to get SHA-1 and pubkey of the cert? thanks.

No matter how many times I download what seems to be a cert for Mac App Distribution Certificate Type Mac App Distribution When I look at its Apple Mac App Signing extension property in the keychain, it always says Apple Mac App Signing (Development) Whenever I try to use it to code sign, the signing is 'generic' which fails security checks. AI says... The certificate field Apple Mac App Signing (Development) (1.2.840.113635.100.6.1.7) indicates that the certificate is intended for development purposes. This type of certificate is used for signing macOS applications during the development and testing phases. But that is not what I am expecting to get from the certificate type Mac App Distribution. What can I do to actually get to production?

I would like to code sign an app or installer with an RSA 4096-bit code signing certificate. I created a CSR using RSA4096bit and ECC in Mac Keychain Access, but I was unable to use that CSR to create a code signing certificate on the Apple Developer site. How do I issue an RSA4096-bit or ECC code signing certificate?

The product archive package's signature is invalid. Ensure that it is signed with your "3rd Party Mac Developer Installer" certificate. (90237) I'm receiving this error, despite the fact that I'm using this certificate when creating the pkg (with electron-forge) My configuration is shown below - note the 3rd Party Mac Developer Installer identity when using new MakerPKG. const config: ForgeConfig = { packagerConfig: { asar: true, name: 'Deep Focus', icon: 'resources/icon.icns', osxSign: { identity: 'Apple Distribution: Timeo Williams (3Y4F3KTSJA)', type: 'distribution', provisioningProfile: '/Users/timeo/Desktop/Deep Focus/deepWork/distribution.provisionprofile', preAutoEntitlements: false, // eslint-disable-next-line @typescript-eslint/explicit-function-return-type optionsForFile() { return { entitlements: 'build/entitlements.mas.plist' } } }, extendInfo: 'build/info.plist', osxUniversal: { mergeASARs: true }, appCategoryType: 'public.app-category.productivity', appBundleId: 'com.electron.deepfocus', extraResource: [ 'resources/.env', 'resources/icon.icns', ] }, rebuildConfig: {}, makers: [ new MakerSquirrel({}), new MakerZIP({}), new MakerRpm({}), new MakerDeb({}), new MakerDMG({ appPath: './out/Deep Focus-darwin-arm64/Deep Focus.app', name: 'Deep Focus', icon: './resources/icon.icns', format: 'ULFO', overwrite: true, contents: (opts) => [ { x: 130, y: 220, type: 'file', path: opts.appPath }, { x: 410, y: 220, type: 'link', path: '/Applications' } ] }), new MakerPKG({ name: 'Deep Focus', identity: '3rd Party Mac Developer Installer: Timeo Williams (3Y4F3KTSJA)' }) ], plugins: [ new VitePlugin({ build: [ { entry: 'src/main.ts', config: 'vite.main.config.ts', target: 'main' }, { entry: 'src/preload.ts', config: 'vite.preload.config.ts', target: 'preload' } ], renderer: [ { name: 'main_window', config: 'vite.renderer.config.mts' // Path to Vite config for renderer process } ] }), new FusesPlugin({ version: FuseVersion.V1, [FuseV1Options.RunAsNode]: false, [FuseV1Options.EnableCookieEncryption]: true, [FuseV1Options.EnableNodeOptionsEnvironmentVariable]: false, [FuseV1Options.EnableNodeCliInspectArguments]: false, [FuseV1Options.EnableEmbeddedAsarIntegrityValidation]: true, [FuseV1Options.OnlyLoadAppFromAsar]: true }) ] } Yet, I'm getting the error from Transporter that it's invalid?

I am writing to follow up on my request for Family Control permission, which I submitted through the appropriate form over a week ago. Unfortunately, I have not yet received any response or access to the requested permissions. Could you kindly provide an update on the status of my request? If any further information or action is needed from my end, please let me know.

Hi, I am trying to make my app build on GitHub Action CI pipeline. App builds fine on xcode on my mac. For CI I am using command line xcode. I am getting following error: No profiles for 'com.snslocation.electricians-now' were found: Xcode couldn't find any iOS App Development provisioning profiles matching 'com.snslocation.electricians-now'. Automatic signing is disabled and unable to generate a profile. To enable automatic signing, pass -allowProvisioningUpdates to xcodebuild. (in target 'myapp' from project 'myapp') You can see full log of the build here: https://github.com/nbulatovi/ElectriciansNow/actions/runs/12603115423/job/35127512689 The provisioning profile is present, and verified in the previous steps in the pipeline, however xcode refuses to find it. If I add -allowProvisioningUpdates error stays. I tried manually mapping app id to profile name. Is there a way to get any debug log from xcode profile search, to see why is it not picking up the correct profile? Or can you maybe help in some other way? xcode version is 15.4, iOS SDK 17.5

Even if I recreate everything and register it, it does not register in xcode as shown below. No matter how many times I regenerate the certificate and profile, the same thing happens.

I'm trying to download a profile for a developer download for an app, but I get this error and can't install the profile. I've already registered the device and UDID and added it to the profile. Please let me know what I need to do.