Hi, I have a .NET MAUI app which I've added subscriptions to using the Plugin.InAppBilling nuget package. When I tested on TestFlight I got an almost immediate crash. After doing some research I followed advice to add an Entitlements.plist file to Platforms > iOS with the following entry: com.apple.developer.in-app-purchase The distribution provisioning profile I'm using to sign my app has the App ID set to an Identifier which has "In-App Purchase" ticked, but greyed out in it's "Capabilities" section on https://developer.apple.com/. I'm not sure why it's ticked and greyed out, but I assume that means that "In-App Purchase" is enabled. The app runs file locally but when I create an IPA file and add it to Transporter for upload to App Store Connect I get the following error: "Validation failed (409) Invalid Code Signing Entitlements. Your application bundle's signature contains code signing entitlements that are not supported on iOS. Specifically, key 'com.apple.developer.in-app-purchase' in 'Payload/[Removed].app/[Removed]' is not supported. (ID: [Removed])". Here is the structure of my csproj code for creating a IPA file for iOS: The command I use: dotnet publish [Removed]/app.csproj -f:net9.0-ios -c:Release ^ /p:PlatformTarget=Arm64 ^ /p:RuntimeIdentifier=ios-arm64 ^ /p:ServerAddress=[Removed] ^ /p:ServerUser=[Removed] ^ /p:ServerPassword=[Removed] ^ /p:ArchiveOnBuild=true ^ /p:BuildIpa=true I'm stuck trying to figure this out. If you could please point out any issues with what I'm doing or if you have any suggestions to resolve the problem I would very much appreciate it. Thanks, Ben

Whilst waiting for the company developer account I successfully notarised an app/pkg On switching to the company account the app/pkg has been stuck in progress for over 2 days (see below) The initial submission was via Xcode and later via command line. The last one was when I updated bundle ids etc and built with Github Actions. The initial submission did coincide with a service outage, however that is marked as resolved. I would like to cancel all of them now that I have switched the signing account and the bundle ID but there seems no way to do this? Thoughts and comments welcome. Thanks Paul -------------------------------------------------- createdDate: 2025-08-14T11:03:24.837Z id: edf215d0-4d15-4075-aa6f-4755a35b3d45 name: ZenityEndpointAgent.pkg status: In Progress -------------------------------------------------- createdDate: 2025-08-12T21:36:36.345Z id: 9c98de09-d3aa-449b-ad47-7e721b0342c5 name: AIEdgeDeviceAgent.pkg status: In Progress -------------------------------------------------- createdDate: 2025-08-12T16:58:50.891Z id: 9206f9be-0fc4-4c6c-aa66-8fcbe3332155 name: AIEdgeDeviceAgent.pkg status: In Progress -------------------------------------------------- createdDate: 2025-08-12T10:37:35.624Z id: b20d1dd0-084e-441c-87a6-641fb088819e name: AIEdge Device Agent.zip status: In Progress

I added a watchkit extension to an existing app. I get this error when uploading to App Store Connect. Building the archive itself is fine: Prepared archive for uploading Upload failed error: Validation failed Missing Info.plist value. A value for the key “WKApplication”, or “WKWatchKitApp” if your project has a WatchKit App Extension target, is required in “Runner.app/Watch/watch_Watch_App.app” bundle. For details, see: https://developer.apple.com/documentation/watchkit/creating_independent_watchos_apps/setting_up_a_watchos_project have the exact same issue when bundling. I added the flag manually in a additional plist fields entry with WKApplication=1 because my Info.Plist is generated and it didn't help. I wrote a custom Run Script Phase that added the flag and that didn't help as well. I need a reply from someone from Apple here. This needs to be fixed.

Hey, when I try to launch my app it prompts me with a "Apple could not verify" popup. The thing is the app has been signed and stapled. xcrun stapler validate .app for my app returns "The validate action worked!" If I also run syspolicy_check distribution .app it returns: "App passed all pre-distribution checks and is ready for distribution" Any idea?

Hello everyone, I'm hoping to find a solution for a critical issue that is blocking my app's submission to the App Store. My app uses the Screen Time API and therefore has a main app and a DeviceActivityMonitor extension. The main app has been successfully granted the Family Controls (Distribution) entitlement. However, the DeviceActivityMonitor extension is stuck with only the Family Controls (Development) entitlement. This mismatch causes my build to fail during the archive/distribution process with the error: "Provisioning profile failed qualification. Profile doesn't support Family Controls (Development)." This is a hard blocker, as the extension is a mandatory part of the API. I have already filled out the entitlement request form and also contacted Developer Support (Case #102666581576), who confirmed they could not assist and directed me here. My question is: What is the correct procedure to escalate or resolve the issue of a required extension not receiving the distribution-level Family Controls entitlement after the main app has already been approved? Has anyone else encountered this specific "Development" vs. "Distribution" mismatch and found a definitive way to resolve it? Any guidance would be greatly appreciated. Thank you!

Hello, I have a macOS app built with Flutter’s macOS target (native Xcode project). The app is unsigned (no Developer ID code signing / notarization). The .app bundle looks valid: CFBundlePackageType = APPL Unique CFBundleIdentifier No LSUIElement or LSBackgroundOnly Executable exists and is runnable Placed at /Applications/MyApp.app (top-level), runs fine from Finder However, it does not show up in Launchpad. What I tried: Remove quarantine: xattr -dr com.apple.quarantine "/Applications/MyApp.app" Force Launch Services registration: /System/Library/Frameworks/CoreServices.framework/Frameworks/LaunchServices.framework/Support/lsregister -f "/Applications/MyApp.app" Rebuild LS caches: /System/Library/Frameworks/CoreServices.framework/Frameworks/LaunchServices.framework/Support/lsregister -kill -r -domain local -domain system -domain user Reset Launchpad DB and restart Dock: defaults write com.apple.dock ResetLaunchPad -bool true && killall Dock Verified bundle structure/type: mdls -name kMDItemContentType -name kMDItemKind "/Applications/MyApp.app" → shows com.apple.application-bundle / Application Questions Is code signing/notarization required for an app to appear in Launchpad (even if it runs from Finder)? What additional conditions cause Launchpad to skip an otherwise valid, unsigned .app in /Applications? Are there deeper Launch Services or Dock database checks I can run to diagnose why this specific app is excluded?

I have a mac app which has a launch agent. I signed it with my account, but it always shows as my personal 'XX ***" in the login items of mac settings. Actually this is the reason I switched my personal account to a company account. But now it is still shown as 'XX ***' in the login items after I signed up again with this company account. Do you know how I can change this? The identity I also tried to create a new one with the team, but it does not allow me to create a new one. Chatgpt recommends revoking the current one, but this will affect our old release.

Hi Apple Developer Community, I'm experiencing an issue with Family Controls entitlements for my iOS app that I'd like to discuss and see if others have encountered similar problems. Background: My app (BrightStart) uses Family Controls to help users build healthy morning routines by temporarily blocking distracting apps until they complete a sunlight exposure session. The core functionality relies on automatic time-based blocking (e.g., block social media apps from 6-8am daily). The Problem: I have Family Controls working perfectly in development builds, but I'm blocked from distributing via TestFlight due to entitlement issues with my Device Activity Monitor extension. Technical Details: Main app bundle ID: app.brightstart.app ✅ Has both "Family Controls (Development)" and "Family Controls (Distribution)" options available Extension bundle ID: app.brightstart.app.BrightStartMonitorExtension ❌ Only shows "Family Controls (Development)" - no Distribution option Error when archiving for TestFlight: ❌ Provisioning profile failed qualification Profile doesn't support Family Controls (Development). Family Controls (Development) feature is for development only. Please use Family Controls (Distribution) for distribution. Impact: Cannot upload to TestFlight for beta testing Native FamilyActivityPicker falls back to mock UI in distributed builds Automatic scheduled app blocking (via DeviceActivityMonitor) doesn't function in production Questions for the community: Has anyone successfully gotten "Family Controls (Distribution)" enabled for a Device Activity Monitor extension? Is this a known limitation, or should I expect this option to be available? Are there alternative approaches for time-based automatic app blocking that work in distribution builds? Should I contact Apple Support directly about enabling this entitlement for the extension? Btw, Cursor wrote this summary above, so it could be just hallucinating the issue? Would really appreciate anyone's thoughts here.

Good afternoon, Our team is currently developing a mobile application that includes video call functionality, and we are seeking the optimal approach to enable incoming calls on iOS devices. Ideally, we would like calls to be delivered even when the app is completely closed or after the device is restarted. As I understand it, this may require obtaining VoIP permissions; otherwise, calls may only work when the app is open or running in the background. I would appreciate it if you could confirm my understanding and advise me on the steps or requirements for obtaining the appropriate permissions. Currently, when I try to launch the app in XCode, I see an error (screenshot).

I am building an electron app bundled with python. My code signing was fast, but when it came to notarization, it has already taken over 6+ hours. How can I speed things up?

Hi All, Like many others I'm a little confused with gaining access to the family controls capability. Our app is ready to push to testflight, and we sent the request to apple last week. However only learning today that we need to request for the shield extension as well. I wanted to ask what the expected timeline is for being approved? I've seen posts here saying less than a week, and some people having to wait longer than 6 weeks. Any advise or guidance on getting approved smoothly & swiftly would be highly appreciated

Our app .dmg file was successfully code signed. We then revised the app and created a new .dmg. Running codesign gave an "app is already signed" message. Then running codesign -dv said "code object is not signed at all" Older solutions said to use -f to force signing, but that is no longer an option.

I made a macOS application using Swift Package and distributed it in dmg format through Apple Notary service. However, we received a report from a user that it can be launched from a disk image mounted from dmg, but when copied to /Applications, the app is broken and does not start. I looked into why this happened, I noticed that the codesign command returned different results when copying the application bundle and /Applications on the volume mounted dmg with Finder. Mounted dmg: OK ❯ codesign --verify --deep --verbose /Volumes/azoo-key-skkserv/azoo-key-skkserv.app /Volumes/azoo-key-skkserv/azoo-key-skkserv.app: valid on disk /Volumes/azoo-key-skkserv/azoo-key-skkserv.app: satisfies its Designated Requirement Copied by Finder: Bad codesign reports that there are 148 added/missing files. ❯ codesign --verify --deep --verbose /Applications/azoo-key-skkserv.app /Applications/azoo-key-skkserv.app: a sealed resource is missing or invalid file added: /Applications/azoo-key-skkserv.app/Contents/Resources/AzooKeyKanakanjiConverter_KanaKanjiConverterModuleWithDefaultDictionary.bundle/Contents/Resources/Dictionary/louds/グ1.loudstxt3 (skip...) file missing: /Applications/azoo-key-skkserv.app/Contents/Resources/AzooKeyKanakanjiConverter_KanaKanjiConverterModuleWithDefaultDictionary.bundle/Contents/Resources/Dictionary/louds/グ1.loudstxt3 (skip...) Copied by ditto: OK ❯ ditto /Volumes/azoo-key-skkserv/azoo-key-skkserv.app /Applications/azoo-key-skkserv.app ❯ codesign --verify --deep --verbose /Applications/azoo-key-skkserv.app /Applications/azoo-key-skkserv.app: valid on disk /Applications/azoo-key-skkserv.app: satisfies its Designated Requirement I made a simple macOS application to explain this problem in an easy-to-understand way. You can download dmg in github releases, mount dmg, copy it in the Finder, and check if there is a problem by running the codesign command. https://github.com/mtgto/example-utf8-mac-notarization As a result, I learned the following two things. Occurs only with resources with file names whose values change due to NFC/NFD normalization No problems occur with the resources of the application itself. Generated by the Swift Package resources that the application depends on I think this is a problem with Finder or Gatekeeper.

Hello, I'm currently trying to upload a new version of an existing application. But each time I try to validate the archive of the application, I got the following error in Xcode (v16.2) : Invalid code signing entitlements. Your application bundle’s signature contains code signing entitlements that aren’t supported on macOS. Specifically, the “37CG5MY799.com.example.app” value for the com.apple.application-identifier key in “com.example.app.pkg/Payload/app.app/Contents/MacOS/app” isn’t supported. This value should be a string that starts with your Team ID, followed by a dot (“.”), followed by the bundle ID. I suspect that there is a problem with the App ID Prefix (that is 37CG5MY799 for the app) when our team ID is E4R7RJ7LA3 but I cannot find a solution. I asked the Apple Developer Support for help and I have read the documentation they sent but it couldn't solve this problem so they redirected me to the forums. https://developer.apple.com/library/archive/qa/qa1879/_index.html https://developer.apple.com/library/archive/technotes/tn2318/_index.html#//apple_ref/doc/uid/DTS40013777-CH1-OVERVIEW https://developer.apple.com/library/archive/technotes/tn2318/_index.html#//apple_ref/doc/uid/DTS40013777-CH1-TNTAG33 There isn't any obvious App ID Prefix mismatch in the entitlement between the Application's signature entitlement and the Embedded provisioning profile entitlement . Application's signature entitlement : <dict> <key>com.apple.application-identifier</key> <string>37CG5MY799.com.example.app</string> <key>com.apple.developer.team-identifier</key> <string>E4R7RJ7LA3</string> <key>com.apple.security.app-sandbox</key> <true/> <key>com.apple.security.application-groups</key> <array> <string>group.com.example.app</string> </array> <key>com.apple.security.files.user-selected.read-only</key> <true/> </dict> Embedded provisioning profile entitlement : <dict> <key>com.apple.security.application-groups</key> <array> <string>group.com.example.app</string> <string>E4R7RJ7LA3.*</string> </array> <key>com.apple.application-identifier</key> <string>37CG5MY799.com.example.app</string> <key>keychain-access-groups</key> <array> <string>37CG5MY799.*</string> </array> <key>com.apple.developer.team-identifier</key> <string>E4R7RJ7LA3</string> </dict> The app also have a browser extension that correctly use the Team ID. How to solve this problem ? Thanks for your time, Qeg

Hello Apple support, A few days ago, I received an e-mail granting the entitlement for Critical Alerts to my app VIAWEB Mobile, bundle ID br.com.viawebsystem.VIAWEBservice . This was my second attempt: in the first time I requested the entitlement for all our apps, but it was denied. This time I requested for just our main app, and now it was approved. I have just followed several tutorials and instructions available on the Internet, but I couldn't enable this capability in my app. What I tried and where I stopped: In my Xcode 16.4, target "VIAWEB Mobile", Signing & Capabilities, All: unchecked the Automatic manage signing and checked again, selected the correct Team. In the iOS section, Xcode Managed Profile, click in the little "i" and there is no Critical Alerts in the Capabilities list, nor com.apple.developer.usernotifications.critical-alerts in the Entitlements list. And so, there is no Critical Alerts in the "+ Capability" window. If I go to Certificates, Identifiers & Profiles, Identifiers, and click to edit my App ID Configuration, there is no Critical Alerts to enable in the Capabilities list. In Capability Requests, I just see the plus sign next to Critical Alerts (to make an additional request), and the status Approved when I click on View Requests (2). Can you provide me with updated instructions on how I can enable this entitlement for my app? Thank you! Best regards, The VIAWEB Developer Team.

In Swift I'm using unzip by launching a Process to unzip a file. I added a launchRequirement to the process in order to make sure the executable is code signed by Apple and the identifier is com.apple.unzip. After testing out my code on another machines (both physical and virtual), I found out that in some the identifier is actually com.apple.zipinfo, which broke the SigningIdentifier requirement. It's safe to assume that /usr/bin/unzip can be trusted since it's in a System Integrity Protection (SIP) location, but I'm wondering why this executable has different identifiers?

I'm trying to help out one of our vendors by building a skeleton PCI dext which they can flesh out. However, I can't seem to get the signing right. I can't sign it at all using no team or my personal team. "Signing for requires a development team", and "Personal development teams ... do not support the System Extension capability". I can't sign the driver because "DriverKit Team Provisioning Profile: doesn't match the entitlements file's value for the com.apple.developer.driverkit.transport.pci entitlement. I think this problem occurs because our company has already been assigned a transport.pci entitlement, but for our own PCI vendor ID. But I want to build and test software that works with our vendor's PCI device. I tried generating a profile for the driver manually, it contained only our own company's PCI driver match: IOPCIPrimaryMatch = "0x0000MMMM&0x0000FFFF"; where MMMM is our own PCI vendor ID. Is there a better way to inspect the profile Xcode is using than the postage-stamped sized info popup which truncates the information? I would download the generated profile but it doesn't appear on the profile, but Xcode is accessing it from somewhere. When I look at the available capabilities I can add to an app identifier on the Developer portal, I see com.apple.developer.driverkit.transport.usb, which is "development only". There's no "development only" capability for PCI. Does this mean it isn't possible to develop even a proof-of-concept PCI driver without being first granted the DriverKit PCI (Primary Match) entitlement? When adding capabilities to a driver, the list of available capabilities shown in Xcode has one "DriverKit PCI (Primary Match) entry", but if I double click it, two such entries appear in the Signing and Capabilities tab for my driver target. On the Developer portal, when I look at my driver's Identifier, there are two Capabilities labelled DriverKit PCI (Primary Match). Why?

I'm working on an app that needs access to device activity. When I add device activity entitlement, I'm getting Provisioning profile "..." doesn't include the com.apple.developer.deviceactivity entitlement. This is failing for both, the main app and the extension, and both have entitlements added. It is not clear how to add it to the profile, the provisioning profile is created/managed by XCode. When I remove the entitlement, I can build my app but it won't be able to use device activity data I reached out to Developer Support, and they sent me here. What is the right way to add device activity entitlement? I'm also seeing another issue with XCode Cloud builds. When I remove device activity entitlement. I can build my app w/o any issue, and I can also install it directly on my iPhone. However, XCode Cloud builds fail wit Run command: 'xcodebuild -exportArchive -archivePath /Volumes/workspace/tmp/d41fc2f1-4f39-4906-8941-112488e75f6c.xcarchive -exportPath /Volumes/workspace/adhocexport -exportOptionsPlist /Volumes/workspace/ci/ad-hoc-exportoptions.plist '-DVTPortalRequest.Endpoint=http://172.16.68.193:8089' -DVTProvisioningIsManaged=YES -IDEDistributionLogDirectory=/Volumes/workspace/tmp/ad-hoc-export-archive-logs -DVTSkipCertificateValidityCheck=YES -DVTServicesLogLevel=3' I suspect that it could be related to my app having DeviceActivityExtension but no device activity entitlement is present. Thanks, Peter.

Hello everyone, I'm facing a critical build issue related to Family Controls entitlements and would appreciate any insights or help from the community or Apple engineers. My Goal: I am trying to build and run my app on a physical device to test my DeviceActivityMonitor and ShieldConfigurationExtension. I have already been approved for the Family Controls (Development) entitlement. The Problem: When I try to build, Xcode fails with the following errors, preventing me from testing: For my DeviceActivityMonitor target: Provisioning profile "..." doesn't include the com.apple.developer.deviceactivity entitlement. For my SOSAppShieldExtension target: Provisioning profile "..." doesn't include the com.apple.developer.screen-time-api entitlement. The Core Evidence: This seems to be a server-side issue with how the provisioning profiles are generated. I have used the security cms -D -i command to inspect the downloaded .mobileprovision files. The inspection reveals that the profiles do contain the parent com.apple.developer.family-controls entitlement. However, they are missing the required child entitlements: The profile for my monitor extension is missing com.apple.developer.deviceactivity. The profile for my shield extension is missing com.apple.developer.screen-time-api. Troubleshooting Steps I've Already Taken: I believe I have exhausted all possible client-side fixes. Here is what I have tried over the past few days: Confirmed Approval: I am fully approved for the Family Controls (Development) entitlement. Enabled Capabilities: The "Family Controls" capability is checked and enabled for all three relevant App IDs (main app, monitor extension, shield extension) on the developer portal. Profile Regeneration: I have deleted and regenerated all provisioning profiles for all targets multiple times. Forcing a Server Refresh: I have toggled the "Family Controls" capability off, saved, and then toggled it back on and saved again for each App ID. Creating New Identifiers: I created a brand new, clean App ID for the DeviceActivityMonitor extension (com.sosapp.ios.devicemonitor) and created a new profile for it, but the error persists. Xcode Configuration: I am using manual signing in Xcode and have double-checked that each target is pointing to the correct, newly downloaded provisioning profile. I have also cleaned the build folder and deleted Derived Data multiple times. My Question: Given that my account is approved and the capability is enabled, but the generated profiles are provably missing the necessary child entitlements, this points directly to a bug in the profile generation service on Apple's backend. Has anyone else experienced this specific issue where the parent entitlement is present but the required child entitlements are missing? Is there a known workaround, or can an Apple engineer please investigate the profile generation for my Team ID? Any help would be greatly appreciated. Thank you!

I have an app that runs as a status bar app, mostly. I have set the following in the info.plist file for the app: <key>Application is agent (UIElement)</key> <true/> However, I get a compile error: Provisioning profile Mac Team Provisioning Profile: yout.Drive doesn't include the Application is agent (UIElement) entitlement. Checking the entitlements, I do not see this entitlement anywhere. Where and how do I set this?