After too many boot loops and inability to boot up at all from system data bloating, I decided to restore the iPhone 16 Pro Max I’m beta testing on back to iOS 18.4 for a third time. Unfortunately, I found the iOS 26 beta 2 had made a iCloud backup last night, replacing my 18.4 backup. Is this something betas are supposed to do? I’ve been beta testing for around a decade now, I’ve never seen a iOS beta make an iCloud backup. Is anyone else noticing excessive system data bloating (70-100 GB or more)? Regardless, I’m in it for the long game now 😂

Hi everyone, We’re seeing a rare but frustrating issue in our iOS VoIP app and would appreciate any advice. What’s happening: In some VoIP calls between two users (let’s say A and B), B can’t hear A’s voice, but A can still hear B just fine. It doesn’t happen often, but once it does, the issue persists until the device is restarted. Users who experience this issue typically have other voice or conferencing apps installed and actively use them. They report that when our app runs into this problem, those other apps continue to work normally. ⸻ What we’ve ruled out: • AVAudioSession has microphone permission, and audio input works under normal conditions • Network conditions are stable • App-side logic seems solid — the issue occurs extremely rarely (e.g., 1 out of several thousand calls), making it unlikely to be caused by a consistent bug in our call flow ⸻ What we’ve tried to fix it (all ineffective): Restarting the call — no effect Force-quitting and relaunching the app — no effect Toggling Bluetooth: disconnecting and reconnecting audio route, or switching back to built-in mic — no effect Replugging wired headphones or switching to the default iPhone audio input — no effect ⸻ What actually works (so far): • Restarting the device — this is the only action that reliably fixes the issue ⸻ What we’re looking for help with: 1. Does this sound like an iOS-level AVAudioSession routing or audio stack issue? 2. Is there any way to recover from this state without rebooting the device — either through iOS system settings or programmatically? 3. Are there any known audio routing or input bugs in iOS that match this behavior? Thanks in advance — any suggestions or pointers would be greatly appreciated!

The Uber Driver app is able to get background location and there’s no way to turn it off from settings. Unlike other apps where there’s always an option to turn off background location from settings. Is this a bug or special treatment for big companies? this matters to me because we’re in a similar business but our app has to request background permissions, explicitly. I am attaching both of the screenshots here for you to compare and see. Please note that I verified personally that Uber Driver app is able to get background location.

Officially I was tiredness after was I’m install of ios 18.5 after I got error red logo. And now she stop updating and was I very shocked more. “I searched or hell is this” they don’t know results from this iPhone 11 is jailbroken Yup is my iPhone 11 is jailbroken how we gonna do. Tell me is this real?

When anyone calling through cellular call first calls don’t show or call notifications in screen even didn’t play ringtone . but if caller calling second time then ringing tone play properly. this problem happen my iphone 15 pro .128gb im from india . )

I just upgraded to iOS 26.0 Now when I use car play, the text messages do not show up, only the notification tone on my phone alarms. So now when I get texts while driving, I need to read my phone to read the text. I tried all the solutions within settings but this is a BIG DRAWBACK compared to the old iOS.

I download a demo from:https://applepaydemo.apple.com/wallet-extensions And I run my WalletUIExtention,but it's failed. This is some key in my info.plist <key>NSExtensionMainStoryboard</key> <string>MainInterface</string> <key>NSExtensionPointIdentifier</key> <string>com.apple.PassKit.issuer-provisioning.authorization</string> <key>NSExtensionPrincipalClass</key> <string>MyAUViewController</string> But I found that deleting the key: NSExtendesionPrincipalClass or NSExtendeionMainStoryboard in the info.plist file can make it run. Should I delete the key ? Whitch key ? This is it alert: This it's message: 2025-05-06 09:15:02.946890+0800 WalletUIExt[626:13530] Successfully load keyboard extensions Line: 1 Col:1 2025-05-06 09:15:02.972702+0800 WalletUIExt[626:13597] [xpc.exceptions]<NSXPCConnection: 0x2830c30c0> connection from pid 584 on mach service named com.bank.app.WalletUIExt.viewservice: Exception caught during decoding of received selector __connectToViewControllerFromRemoteViewController:replyHandler:, dropping incoming message. Exception:<NSXPCDecoder: Qx12a82bc00> received a message or reply block that is not in the interface of the remote object (__connectToViewControllerFromRemoteViewController:replyHandler:),

Hi, I've been trying to debug an issue with my extension. I am able to register the extension on install of my app, can select it under Phone> SMS/Call Reporting. When I touch Report it brings up my view controller, with the sender and message details. I set let response = ILClassificationResponse(action: .reportJunk) I've added debug logs throughout my extension and everything looks good. Now when MobileSMS takes over, I see: default 23:15:09.837024-0400 MobileSMS response: extension: error 23:15:09.837328-0400 MobileSMS error reporting SMS response: default 23:15:09.837387-0400 MobileSMS Finished, invoking didCompleteClassificationRequest info 23:15:09.837487-0400 MobileSMS didCompleteClassificationRequest -- di I don't see what the error is, and that last log entry is cut off at "di". I've confirmed my info.plist, allowed domains, aasa, and my remote API is not touched. Any advice? Xcode 16.3 Testing on iPhone 16e iOS 18.4.1

From iOS 26Beta1, iOS 26Beta1.1 to iOS 26Beta2. I couldn't log in to the Feedback App for 4 weeks. It kept prompting BUGs and asked me to log in to Feedback. However, the problem was that I couldn't log in to Feedback. So the problem kept repeating. Apple didn't receive any feedback, so Apple thought this was the most successful version in the history of iOS because it didn't receive any feedback.

After upgrading to iOS system 26, the local name broadcast type is 08, but before upgrading, it is 09 and will be included in the scan resp message; In version 26, the scan resp will also include Manufacturer Specific Data. Before the upgrade, the broadcast message may not necessarily include Manufacturer Specific Data; What I want to ask is, are there any restrictions on Bluetooth broadcasting in version 26? Is it necessary to include Manufacturer Specific Data data? If Manufacturer Specific Data data is included, it may cause fields in the local name broadcast to be truncated and use simple names of type 08

Hello Apple Developer Community, I'm encountering a persistent issue while attempting to create a new partition on my Mac, and I'm hoping to get some assistance or insights from anyone who might have faced a similar problem. Issue Description: I'm trying to partition my internal drive. I initially used Disk Utility.app for this purpose. The partitioning process starts, but consistently freezes when it reaches approximately 10-20% completion. I've left it running overnight (for over 9 hours), but there was no progress, and the application remained unresponsive at that percentage. After several attempts with Disk Utility, I decided to try using the diskutil commands in Terminal to see if that would yield a different result. I used commands such as diskutil apfs resizeContainer and diskutil partitionDisk. Unfortunately, these commands also result in the same behavior: the process starts, reports progress up to about 10-20%, and then completely freezes without any further output or completion, requiring me to force-quit Terminal. Mac Model: Apple M4 Pro MacOS Version: Sequoia 15.6

Newbie in Xcode and in coding in general. Getting this massive error code and can’t seem to fix it. Please help

I am writing to report a significant battery drain issue after updating my Apple Watch SE (2nd generation) to watchOS 26.0 beta. Since the update, my watch’s battery life has drastically decreased: it goes from 100% to 0% in just 6 hours, whereas previously, under my typical usage, a single charge would last about 1.5 days. I have already tried the following troubleshooting steps without success: 1. Performed a fresh reset of the watch. 2. Reset my iPhone. 3. Disabled background app activity. 4. Enabled airplane mode and power saving mode. 5. Disabled Live Activities and Photo Memories Despite these measures, the issue persists. The battery health of my watch is at 90%, so I believe this is likely related to the software update. I am quite concerned about this situation. I have researched and noticed that similar battery drain problems were reported by beta testers of watchOS 11, and unfortunately, there appeared to be no clear resolution at that time. I rely on my Apple Watch daily, and I sincerely hope this can be addressed soon. I would appreciate your assistance in resolving this issue, as it is significantly affecting the usability of my Apple Watch. Thank you for your attention to this matter.

The latest Beta update 18.5.4 has caused connectivity problems with my car (Skoda Enyaq) whereby there is no connection via Bluetooth or the cars internal WiFi. Also contacts will not download to the care which is very frustrating.

Hey there, Just writing here to say how I do enjoy the latest update, but I can’t seem to run it on my iPhone 14 Pro well because it tends to overheat. i can deal with the stuttering issues and app crashes, that’s understandable, but for some reason the hardware seem to really heat up after normal use (scrolling on social media platforms). oh also, I do think rolling back your phone‘s software should be a simpler process as well. It’s not impossible, but the demand of a computer in reinstating a previous backup when iCloud backups your device through WiFi seems like a missed opportunity. Okay. Thank you for reading.

Hello, I created a particular ray tracing based photo/video capture app for iPhone (which causes me several headaches in finding the optimal configuration) that which often offers very soft and visually beautiful shots but is trapped in the usual oblivion of apps from unknown developers. While it is true that on the one hand the fact that almost no one downloads your app even if it is free can save you from several gaffes in the early days, in the long run it becomes depressing. So I thought of creating something that could be an incentive to try the app. Not having money to invest in prizes for contests or much more pragmatically in advertising, I thought of adding a function where you can see the best photos taken in your area and vote for them and, if you want, add a photo taken in the competition. Do you think it could be a nice idea? It's true that the problem itself is to overcome the wall of 0 downloads, where your app is neither successful nor unsuccessful because in fact nobody tries it, but without money for advertising I don't have many other ideas... Thanks

O v er the past few months, I’ve been experiencing persistent, abnormal behavior on my iPhone. Here's a short timeline: March 2025: Most apps log me out every time I close them. April 2025: Stored passwords suddenly begin failing across apps and websites. May–June 2025: Password recovery emails from Gmail accounts no longer arrive — suggesting that Gmail itself may be compromised or blocked/intercepted. Given the escalation, I ran several diagnostics and extracted system-level logs. Below is a structured summary of findings that point toward potential remote access, network traffic rerouting, and possibly hidden use of Bluetooth or debugging interfaces. ##1 Source: remotectl_dumpstate.txt More than 50 remote lockdown and diagnostic services are listed as active. Notable entries: com.apple.mobile.lockdown.remote.trusted and .untrusted com.apple.mobile.file_relay.shim.remote com.apple.webinspector.shim.remote com.apple.pcapd.shim.remote com.apple.bluetooth.BTPacketLogger.shim.remote com.apple.mobile.insecure_notification_proxy.remote This volume of .shim.remote and diagnostic services appears highly irregular for a non-debug, non-jailbroken device. 2. Skywalk Network Flows and Unusual Routing Source: skywalk.txt Dozens of flowswitch entries across interfaces like: ipsec0-7, pdp_ip0-2, en0-2, awdl0 Apps such as Gmail, ChatGPT, Preferences, and com.apple.WebKit are marked as defunct, yet persist in flow tables. Two specific daemons — replicatord and siriactionsd — appear on nearly every interface, in both QUIC and TCP6 traffic. skywalkctl flow-route shows multiple external IP paths, with flows routed through ipsec7, owned by kernel_task.0 — which could indicate system-level tunneling. 3. System Anomalies and Resource Behavior Inaccessible System Network Tools Source: get-network-info.txt All scutil calls fail (/usr/sbin/scutil does not exist). This blocks access to: DNS configuration (scutil --dns) Proxy and VPN status (scutil --proxy, --nc list) Reachability checks (scutil -r www.apple.com) Key Questions for the Developer Community Are >50 remote .shim.remote services typical on iOS 18.5 (release build)? Or does this suggest tampering, an MDM configuration, or debug provisioning? Could a misconfigured VPN or MDM profile enable persistent flow-switching across multiple interfaces (e.g., ipsec, pdp, awdl) and reroute app traffic such as Gmail? Is it possible for a test or developer certificate to silently side-load a background daemon, or trigger services like pcapd or file_relay, without showing in Profiles or Settings? Has anyone else seen the scutil binary missing or inaccessible on a stock iPhone? Could this be a sign of intentional lockdown or system modification? If anyone on iOS 18.5 / iPhone17,1 can share their remotectl_dumpstate output, I'd like to compare the service count and see if this behavior is reproducible. I’d appreciate any insight from those familiar with Apple’s system daemons, skywalk internals, or network service behavior. Happy to share sanitized logs or run additional diagnostics if needed. Thanks in advance. get-network-info.txt route-info.txt remotectl_dumpstate.txt [ assetsd.diskwrites_resource-2025-06-25-221428.json linkText

Unable to select the desired build in App Store Connect; clicking on the build has no effect. Steps to reproduce: 1.I select my app 2.I choose which build to add 3.I try to select the build Expected result: I should be able to select the build Actual result: Nothing happens Browsers Tested: Google Chrome (both PC and mobile), safari mobile Supporting Video: https://www.loom.com/share/cd9c831920fb43518ef461c9a697f09f?sid=9ce60f81-0a7c-44f4-b88a-74dcc9820e14, https://drive.google.com/file/d/1PJEixy8IpFTEEDLjBMQjV-b9U8zUM2S0/view?usp=sharing Screenshots: https://gyazo.com/e390a5ddaa142ac9e5cbb2a6757abee8, https://gyazo.com/08ac242fbfd61d375766da04f7eb209c

I would like to inquire about an error that has started occurring while debugging AppStore billing. (In sandbox environment) This error occurs after entering a password and completing the purchase process, and in this case, no completion alert appears. The error doesn't seem to depend on the purchase item, sandbox account, or device, and shows unstable behavior - sometimes succeeding and sometimes failing. Additionally, this error started occurring after special debugging where the network was disconnected during the purchase process. Moreover, the same error occurs in the TestFlight version of our already released normal (supposedly) version. I think this might be a sandbox-specific error where the system has temporarily become unstable, but what do you think? If so, how can I resolve this issue? I would appreciate your insights on the cause and appropriate response. Error details below: &lt;SKPaymentQueue: 0x283b3d070&gt;: Payment completed with error: Error Domain=ASDErrorDomain Code=500 "(null)" UserInfo={NSUnderlyingError=0x28364d770 {Error Domain=AMSErrorDomain Code=305 "Purchase Failed" UserInfo={NSLocalizedDescription=Purchase Failed, AMSStatusCode=200, AMSServerPayload={ "cancel-purchase-batch" = 1; customerMessage = "Unauthorized_message"; failureType = ""; "m-allowed" = 0; pings = ( ); }, NSLocalizedFailureReason=Server canceled the purchase}}, storefront-country-code=JPN, client-environment-type=Sandbox}

Ld /Users/devops.mac1/Library/Developer/Xcode/DerivedData/MyJio-fwrzosmtfndowdejljdqbqhcfkjo/Build/Intermediates.noindex/ArchiveIntermediates/*****Production/IntermediateBuildFilesPath/UninstalledProducts/iphoneos/jsi.framework/jsi normal (in target 'React-jsi' from project 'Pods') Facing this error while trying to archive an iOS project through terminal in Mac Agent. The having react native code too. Unable to resolve.