Hello, I am making a project in SDL, and with that I am using SDL_Image. I am doing all of this on Xcode. I've been able to initialize everything just fine, but issues spring up when I try to load an image. When I give the code a path to look for an image: Unable to load image! IMG_Error: Couldn't open [Insert image path here]: Operation not permitted I get that error. Keep in mind "Unable to load image" is a general error I put in the code should loading said image fail, the specific error which I called with IMG_GetError() is what we really need to know. I've seen before that this might occur if a program does not have full disk access. Because of this, I've tried giving Xcode full disk access, but this didn't work and I still got the same error.

Our app uses Metal for image processing. We have found that if our app (and its possible intensive image processing) is started quickly after user is logged in, then calls to Metal may be hanging/stuck for a good while. Example: it can take 1-2 minutes for something that usually takes 3-5 seconds! Metal threads are just hanging in a memmove... In Activity Monitor we see a lot of things are happening right after log-in. But why Metal calls are blocking for so long is unknown to us... The workaround is to wait a minute before we start our app and start intensive image processing using Metal. But hard to explain this workaround to end-users... It doesn't happen on all computers but fairly easy to reproduce on some computers. We are using macOS 15.3.1. M1/M3 Max. Any good ideas for how to proceed with this problem and possible reach out to Apple engineers? Thanks! :)

I am suspecting that setting GCController.shouldMonitorBackgroundEvents = true does not actually make the game controllers inputs accessible to the app when it is in the background. About this value the official documentation says: A Boolean value that indicates whether the app needs to respond to controller events when it isn’t the frontmost app. Now the behavior is that when the app is in focus the users inputs do get correctly recognized but as soon as the app enters the background no inputs get recognized. The controller does not get reported as disconnecting and still works for example in launchpad. I am sure that about 2 months ago when I first used this it did work as one would expect. I also have seen that an app which lets users execute certain actions using their controller has stoped working recently, adding to my suspicion of the feature being broken. Here is a minimum reproducible example: import SwiftUI import GameController @main struct TestingControllerConnectionApp: App { @NSApplicationDelegateAdaptor(AppDelegate.self) var appDelegate var body: some Scene { WindowGroup { ContentView() } } } class AppDelegate: NSObject, NSApplicationDelegate { var statusItem: NSStatusItem? var controller: GCController? func applicationDidFinishLaunching(_ notification: Notification) { setupMenuBar() GCController.shouldMonitorBackgroundEvents = true NotificationCenter.default.addObserver( self, selector: #selector(controllerDidConnect), name: .GCControllerDidConnect, object: nil ) NotificationCenter.default.addObserver( self, selector: #selector(controllerDidDisconnect), name: .GCControllerDidDisconnect, object: nil ) } @objc private func setupMenuBar() { let menu = NSMenu() menu.addItem(NSMenuItem(title: "Quit", action: #selector(quitApp), keyEquivalent: "q")) statusItem = NSStatusBar.system.statusItem(withLength: NSStatusItem.variableLength) statusItem?.button?.image = NSImage(resource: .controllerBar) statusItem?.menu = menu } @objc private func quitApp() { NSApp.terminate(nil) } @objc private func controllerDidConnect(_ notification: Notification) { if let controller = notification.object as? GCController { print("Controller connected") self.controller = controller if let gamepad = controller.extendedGamepad { gamepad.buttonA.pressedChangedHandler = { _, _, pressed in print("Button A pressed: \(pressed)") } } } } @objc private func controllerDidDisconnect(_ notification: Notification) { print("Controller disconnected") } } This is created in a completely fresh Xcode project and NSHumanInterfaceDeviceUsageDescription has been added. I am using a PS5 Controller and a Mac running MacOS 15.4.1 which has been restarted and only Xcode and the app have been opened. I have tested this with setting a multitude of different entitlements and capabilities including: NSHumanInterfaceDeviceUsageDescription Supports Controller User Interaction Required background modes -> App communicates with an accessory com.apple.security.device.bluetooth com.apple.security.device.hid com.apple.security.device.usb I have also set this value at different points in the code with no change of effect. Does anybody see if there is any fault in my code or my understanding of the effect of the value 'shouldMonitorBackgroundEvents'? Or is this the functionality actually being broken on Apples part?

Hi everyone, I'm building a native iOS app using Unreal Engine 5.6 with Firebase for authentication and Firestore. The app uses a MetaHuman avatar and is meant to run as a standalone UE app on iPhone. I'm using this Firebase wrapper: 👉 https://pandoa.github.io/FirebaseFeatures/ I've followed all the steps, including: Adding GoogleService-Info.plist to the Xcode project and ensuring it’s in the correct target Calling FIRApp.configure() in AppDelegate Verifying the plist is bundled correctly However, the app crashes on launch, and Firebase does not initialize properly. Crash log shows: [FirebaseCore][I-COR000005] No app has been configured yet. Setup details: Unreal Engine: 5.6 (source build, macOS) iOS Deployment: 17.5 MetaHuman character packaged correctly and app launches fine without Firebase Has anyone here managed to get Firebase working inside a native Unreal Engine iOS app with this setup? I'd love to hear if there’s something I’m missing — maybe something with initialization timing or module loading? Thanks so much in advance 🙏

When importing FBX animations (generated by Cinema 4d or Blender) the models come in very far way and cannot resize or zoomed in. I have tried every setting from both programs to no avail. Is there a secret to providing the right export options? When importing without animations/and rigging the model imports fine and correct size. But once motion is included, something is awry. I also tried changing base units in Converter, but did not work. I have attache my model heirarchy in C4D as well as the imported result. It appears the animation is imported, as I can see it move, but can barely see it :)

I'm a newbee at Vulkan and Xcode. I have my project on github https://github.com/flocela/OrangeSpider/ Whenever I run, two windows open instead of only one. I added testing, which means I have an OrangeSpider.xctestplan in the OrangeSpider/TestsOrangeSpider/ folder. This is my first time adding testing to an XCode project, so I think this may be where the problem is. I also get this error message: ViewBridge to RemoteViewService Terminated: Error Domain=com.apple.ViewBridge Code=18 "(null)" UserInfo={com.apple.ViewBridge.error.hint=this process disconnected remote view controller -- benign unless unexpected, com.apple.ViewBridge.error.description=NSViewBridgeErrorCanceled}

Hi! I just installed GPTK2 on my new Mac , but the Terminal gave “Error:OpenSSL1.1 has been disabled.” How should I fix it?Or waiting for the GPTK2 beta4? Thanks.

I’m trying to create a CGContext that matches my screen using the following code let context = CGContext( data: pixelBuffer, width: pixelWidth, // 3456 height: pixelHeight, // 2234 bitsPerComponent: 10, // PixelEncoding = "--RRRRRRRRRRGGGGGGGGGGBBBBBBBBBB" bytesPerRow: bytesPerRow, // 13824 space: CGColorSpace(name: CGColorSpace.extendedSRGB)!, bitmapInfo: CGImageAlphaInfo.none.rawValue | CGImagePixelFormatInfo.RGBCIF10.rawValue | CGImageByteOrderInfo.order16Little.rawValue ) But it fails with an error CGBitmapContextCreate: unsupported parameter combination: RGB 10 bits/component, integer 13824 bytes/row kCGImageAlphaNone kCGImageByteOrder16Little kCGImagePixelFormatRGBCIF10 Valid parameters for RGB color space model are: 16 bits per pixel, 5 bits per component, kCGImageAlphaNoneSkipFirst 32 bits per pixel, 8 bits per component, kCGImageAlphaNoneSkipFirst 32 bits per pixel, 8 bits per component, kCGImageAlphaNoneSkipLast 32 bits per pixel, 8 bits per component, kCGImageAlphaPremultipliedFirst 32 bits per pixel, 8 bits per component, kCGImageAlphaPremultipliedLast 32 bits per pixel, 10 bits per component, kCGImageAlphaNone|kCGImagePixelFormatRGBCIF10|kCGImageByteOrder16Little 64 bits per pixel, 16 bits per component, kCGImageAlphaPremultipliedLast 64 bits per pixel, 16 bits per component, kCGImageAlphaNoneSkipLast 64 bits per pixel, 16 bits per component, kCGImageAlphaPremultipliedLast|kCGBitmapFloatComponents|kCGImageByteOrder16Little 64 bits per pixel, 16 bits per component, kCGImageAlphaNoneSkipLast|kCGBitmapFloatComponents|kCGImageByteOrder16Little 128 bits per pixel, 32 bits per component, kCGImageAlphaPremultipliedLast|kCGBitmapFloatComponents 128 bits per pixel, 32 bits per component, kCGImageAlphaNoneSkipLast|kCGBitmapFloatComponents See Quartz 2D Programming Guide (available online) for more information. Why is it unsupported if it matches the 6th option? (32 bits per pixel, 10 bits per component, kCGImageAlphaNone|kCGImagePixelFormatRGBCIF10|kCGImageByteOrder16Little)

Hey everyone, I’m trying to run Kingdom Come: Deliverance 2 using the Game Porting Toolkit, but I’m encountering a black screen when launching the game. From what I know about the game’s requirements, it might be using Shader Model 6.5, which supports advanced features like DirectX Raytracing (DXR) Tier 1.1. This leads me to suspect that the issue could be related to missing support for DirectX 12.1 Features or Shader Model 6.5 in GPTK. Does anyone know if these features are currently supported by GPTK? If not, are there any plans to implement them in future updates? Alternatively, is there any workaround for games that rely on Shader Model 6.5 and ray tracing? Thanks a lot for your help!

During regular use, RealityKit generates an excessive amount of internal logging that is not actionable by third party developers. When developing an iOS RealityKit/ARKit app, this makes the Xcode console challenging to use for regular work. (FB19173812) See screenshots below. Xcode does have an option for filtering out logging from specific SDKs, but enabling this feature to suppress the logging of RealityKit and related SDKs like PHASE is something developers have to do dozens of times each day. After a year of developing a RealityKit app, this process becomes frustrating. If SDKs like Foundation, UIKit, and SwiftUI generated as much logging as RealityKit and related SDKs, Xcode's console would be unusable. Is there any way to disable the logging of RealityKit and PHASE permanently? Thank you for any help you provide.

TL;DR: RealityKit and Reality Composer Pro aren't forward or backward compatible with each other, and the resulting error message is terse and unhelpful. (FB14828873) So far, I've been sticking with Xcode 16.4 for development and only using Xcode 26.0 beta experimentally. Yesterday, I used xcode-select to switch to Xcode 26.0 beta 3 to test it, but I forgot to switch back. Consequently, this morning I unintentionally used the future Reality Composer Pro (the version included with Xcode 26) to make a small change to a USD file. Now I realize that if I'm unlucky, it's possible Reality Composer Pro may have silently introduced a small change into the USD file that may make RealityKit fail to read the file on iOS 18 and visionOS 2, which in the past has resulted in hours of debugging to track down the source of the failure, often a single line in the USD file that RealityKit can't communicate to me other than with the error "the operation couldn't be completed". As an analogy, this situation is as if, during regular development (not involving Reality Composer Pro), Xcode didn't warn you about specific API version conflicts, but instead failed with a generic error message, without highlighting the line in your Swift file that was the source of the error.

Hello RealityKit developers, I'm currently working on physics simulations in my visionOS app and am trying to adapt the concepts from the official sample Simulating physics joints in your RealityKit app. In the sample, a sphere is connected to the ceiling using a PhysicsRevoluteJoint to create a hinge-like simulation. I've successfully modified this setup to use a PhysicsSphericalJoint instead. The basic replacement works as expected: pin1 (attached to the sphere) rotates freely around pin0 (attached to the ceiling), much like a ball-and-socket joint should, removing all translational degrees of freedom. My challenge lies with the PhysicsSphericalJoint's angularLimitInYZ property. The documentation mentions that this property allows limiting the rotation around the Y and Z axes, defining an "elliptical cone shape around the x-axis of pin0." However, I'm struggling to understand how to specify these values to achieve a desired rotational limit. If I have a sphere that is currently capable of rotating 360 degrees around pin0 (like a free-spinning ball on a string), how would I use angularLimitInYZ to restrict its rotation to a certain height or angular range, preventing it from completing a full circle? Specifically, I'm trying to achieve a "swing" like behavior where the sphere oscillates back and forth but cannot rotate completely overhead or underfoot. What values or approach should I use for the angularLimitInYZ tuple to define such a restricted pendulum-like motion? Any insights, code examples, or explanations on how to properly configure angularLimitInYZ for this kind of behavior would be incredibly helpful! The following code is modified from the sample. extension MainView { func addPinsTo(ballEntity: Entity, attachmentEntity: Entity) throws { let hingeOrientation = simd_quatf(from: [1, 0, 0], to: [0, 0, 1]) let attachmentPin = attachmentEntity.pins.set( named: "attachment_hinge", position: .zero, orientation: hingeOrientation ) let relativeJointLocation = attachmentEntity.position( relativeTo: ballEntity ) let ballPin = ballEntity.pins.set( named: "ball_hinge", position: relativeJointLocation, orientation: hingeOrientation ) // Create a PhysicsSphericalJoint between the two pins. let revoluteJoint = PhysicsSphericalJoint(pin0: attachmentPin, pin1: ballPin) try revoluteJoint.addToSimulation() } } The following image is a screenshot of the operation when changing to PhysicsSphericalJoint. Thank you in advance for your assistance.

There is a sample project from Apple here. It has a scene of a city at night and you can move in it. It basically has 2 parts: application code written in what looks like Objective-C (I am more familiar with C++), which inherits from things like NSObject, MTKView, NSViewController and so on - it processes input and all app-related and window-related stuff. rendering code that also looks like Objective-C. Btw both parts are mostly in .mm files (Obj-C++ AFAIK). The application part directly uses only one class from the rendering part - AAPLRenderer. I want to move the rendering part to C++ using metal-cpp. For that I need to link metal-cpp to the project. I did it successfully with blank projects several times before using this tutorial. But with this sample project Xcode can't find Foundation/Foundation.hpp (and other metal-cpp headers). The error says this: Did not find header 'Foundation.hpp' in framework 'Foundation' (loaded from '/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX15.0.sdk/System/Library/Frameworks') Pls help

I am using Unreal Engine 5.6 on a MacBook Pro with an M3 chip and macOS 15.5. I’ve installed Xcode and accepted the license, but Unreal is not detecting the latest Metal Shader Standard (Metal v3.0). The maximum version Unreal sees is Metal v2.4, even though the hardware and OS should support Metal 3.0. I’ve also run sudo xcode-select -s /Applications/Xcode.app and accepted the license via Terminal. Is there anything in Xcode settings, SDK availability, or system permissions that could be preventing access to Metal 3.0 features?"

End goal: to detect 3 lines, and 2 corners accurately. Trying contours but they are a bit off. Is there a way or settings in contours to detect corners and lines more accurately, maybe less an sharper edged/corner contours? Or some other API or methods please? I would love an email please ;) thank you. 2. also an overlay/scale issue

What is Game Mode? Game Mode optimizes your gaming experience by giving your game the highest priority access to your CPU and GPU, lowering usage for background tasks. And it doubles the Bluetooth sampling rate, which reduces input latency and audio latency for wireless accessories like game controllers and AirPods. See Use Game Mode on Mac See Port advanced games to Apple platforms How can I enable Game Mode in my game? Add the Supports Game Mode property (GCSupportsGameMode) to your game’s Info.plist and set to true Correctly identify your game’s Application Category with LSApplicationCategoryType (also Info.plist) Note: Enabling Game Mode makes your game eligible but is not a guarantee; the OS decides if it is ok to enable Game Mode at runtime An app that enables Game Mode but isn’t a game will be rejected by App Review. How can I disable Game Mode? Set GCSupportsGameMode to false. Note: On Mac Game Mode is automatically disabled if the game isn’t running full screen.

In my project I need to do the following: In runtime create metal Dynamic library from source. In runtime create metal Executable library from source and Link it with my previous created Dynamic library. Create compute pipeline using those two libraries created above. But I get the following error at the third step: Error Domain=AGXMetalG15X_M1 Code=2 "Undefined symbols: _Z5noisev, referenced from: OnTheFlyKernel " UserInfo={NSLocalizedDescription=Undefined symbols: _Z5noisev, referenced from: OnTheFlyKernel } import Foundation import Metal class MetalShaderCompiler { let device = MTLCreateSystemDefaultDevice()! var pipeline: MTLComputePipelineState! func compileDylib() -> MTLDynamicLibrary { let source = """ #include <metal_stdlib> using namespace metal; half3 noise() { return half3(1, 0, 1); } """ let option = MTLCompileOptions() option.libraryType = .dynamic option.installName = "@executable_path/libFoundation.metallib" let library = try! device.makeLibrary(source: source, options: option) let dylib = try! device.makeDynamicLibrary(library: library) return dylib } func compileExlib(dylib: MTLDynamicLibrary) -> MTLLibrary { let source = """ #include <metal_stdlib> using namespace metal; extern half3 noise(); kernel void OnTheFlyKernel(texture2d<half, access::read> src [[texture(0)]], texture2d<half, access::write> dst [[texture(1)]], ushort2 gid [[thread_position_in_grid]]) { half4 rgba = src.read(gid); rgba.rgb += noise(); dst.write(rgba, gid); } """ let option = MTLCompileOptions() option.libraryType = .executable option.libraries = [dylib] let library = try! self.device.makeLibrary(source: source, options: option) return library } func runtime() { let dylib = self.compileDylib() let exlib = self.compileExlib(dylib: dylib) let pipelineDescriptor = MTLComputePipelineDescriptor() pipelineDescriptor.computeFunction = exlib.makeFunction(name: "OnTheFlyKernel") pipelineDescriptor.preloadedLibraries = [dylib] pipeline = try! device.makeComputePipelineState(descriptor: pipelineDescriptor, options: .bindingInfo, reflection: nil) } }

Hi , My application meet below crash backtrace at very low repro rate from the public users, i do not see it relate to a specific iOS version or iPhone model. The last code line from my application is calling CAMetalLayer nextDrawable API. I did some basic studying, suppose it may relate to the wrong CAMetaLayer configuration, like frame property w or h <= 0.0 bounds property w or h <= 0.0 drawableSize w or h <= 0.0 or w or h > max value (like 16384) Not sure my above thinking is right or not? Will the UIView which my CAMetaLayer attached will cause such nextDrawable crash or not ? Thanks a lot Main Thread - Crashed libsystem_kernel.dylib __pthread_kill libsystem_c.dylib abort libsystem_c.dylib __assert_rtn Metal MTLReportFailure.cold.1 Metal MTLReportFailure Metal _MTLMessageContextEnd Metal -[MTLTextureDescriptorInternal validateWithDevice:] AGXMetalA13 0x245b1a000 + 4522096 QuartzCore allocate_drawable_texture(id<MTLDevice>, __IOSurface*, unsigned int, unsigned int, MTLPixelFormat, unsigned long long, CAMetalLayerRotation, bool, NSString*, unsigned long) QuartzCore get_unused_drawable(_CAMetalLayerPrivate*, CAMetalLayerRotation, bool, bool) QuartzCore CAMetalLayerPrivateNextDrawableLocked(CAMetalLayer*, CAMetalDrawable**, unsigned long*) QuartzCore -[CAMetalLayer nextDrawable] SpaceApp -[MetalRender renderFrame:] MetalRenderer.mm:167 SpaceApp -[FrameBuffer acceptFrame:] VideoRender.mm:173 QuartzCore CA::Display::DisplayLinkItem::dispatch_(CA::SignPost::Interval<(CA::SignPost::CAEventCode)835322056>&) QuartzCore CA::Display::DisplayLink::dispatch_items(unsigned long long, unsigned long long, unsigned long long) QuartzCore CA::Display::DisplayLink::dispatch_deferred_display_links(unsigned int) UIKitCore _UIUpdateSequenceRun UIKitCore schedulerStepScheduledMainSection UIKitCore runloopSourceCallback CoreFoundation __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ CoreFoundation __CFRunLoopDoSource0 CoreFoundation __CFRunLoopDoSources0 CoreFoundation __CFRunLoopRun CoreFoundation CFRunLoopRunSpecific GraphicsServices GSEventRunModal UIKitCore -[UIApplication _run] UIKitCore UIApplicationMain

This is the first time I have tried adding achievements to my games. The online documentation says: "Before you can access achievements in your code, you can configure them in Xcode and sync the configuration updates you make with App Store Connect. Begin configuring achievements by creating a GameKit configuration file. In Xcode, choose File > New > File from Template. Select GameKit File, and click Next. In the sheet that appears, enter a name for the configuration and click Create." Sounds easy - except Xcode 16.2 does not have a GameKit File as one of the Templates. Please advise on how to proceed and it would be nice if the documentation were updated.

New to achievements. I added them in App Store Connect and want to test them. Apple Documentation says this: "Before you begin testing your GameKit configuration, you need to enable Debug Mode. In Xcode, choose Product > Scheme > Edit Scheme. From the Run configuration, select Options and toggle Enable Debug Mode. To begin testing your achievement configuration, open the game Progress Manager. In Xcode, choose Debug > GameKit > Manage Game Progress." Sounds easy enough, but there is no "GameKit" under Debug in Xcode 16.2.