Could you help me with resolving this issue, please. I've got following trace: ksmemory_notifyUnhandledFatalSignal EXC_BAD_ACCESS (KERN_INVALID_ADDRESS) Crashed: com.apple.main-thread EXC_BAD_ACCESS KERN_INVALID_ADDRESS 0x000000000000002b Crashed: com.apple.main-thread 0 KSCrash 0xbff8 ksmemory_notifyUnhandledFatalSignal + 12 1 KSCrash 0xcd6c handleSignal + 100 2 libsystem_platform.dylib 0x4178 _sigtramp + 56 3 libsystem_kernel.dylib 0x42f8 mach_msg2_internal + 76 4 libsystem_kernel.dylib 0x4214 mach_msg_overwrite + 428 5 libsystem_kernel.dylib 0x405c mach_msg + 24 6 CoreFoundation 0x46868 __CFRunLoopServiceMachPort + 160 7 CoreFoundation 0x1d848 __CFRunLoopRun + 1188 8 CoreFoundation 0x1ca6c _CFRunLoopRunSpecificWithOptions + 532 9 GraphicsServices 0x1498 GSEventRunModal + 120 10 UIKitCore 0x9ddf8 -[UIApplication _run] + 792 11 UIKitCore 0x46e54 UIApplicationMain + 336 12 UIKitCore 0x172938 -[UIScrollView contentInset] + 588 13 AppName 0xed9440 main + 4386804800 (AppDelegate.swift:4386804800) 14 ??? 0x189f76e28 (Missing) It appears that a variable or object is attempting to access another object that has already been deallocated. Based on the stack trace, the issue was likely detected while layout was in progress. Our analytics show this happens generally on app launch and occasionally during normal use. Unfortunately, I couldn't gather additional diagnostic data. I tried to reproduce the issue using the Leaks tool and enabled runtime diagnostics (Address Sanitizer, Malloc Scribble, Zombies), but without success. I may be overlooking something — any suggestions would be greatly appreciated. Thank you in advance

I have been working on a M1 Mac mini, using my iPad Air M2 running 26.3 iPadOS. Switched to a new M4 Mac mini, went to connect my iPad to run from Xcode and was presented this "The developer disk image could not be mounted on this device." So how can a get an updated DDI? I appreciate any ideas. /Users/robertlawson/Desktop/Screenshot 2026-02-15 at 8.21.50 PM.png

I am on a windows computer using visual studio 2026 for developing .NET Maui apps for Android and iOS. Am I able to connect my iPhone to my windows computer and deploy my .NET Maui app to my connected iPhone during deveoplemt?

Every now and then I get this very frustrating message on Feedback Assistant. For instance, in FB14696726 I reported an issue with the App Store Connect API. 4 weeks later, I got a reply, asking among other things for a „correlation key and Charles log“. I immediately replied saying that I didn‘t know what those are, and they replied After reviewing your feedback, it is unclear what the exact issue is. I pointed out that I had asked a question which was left unanswered, and they replied explaining what the correlation key is. Then I asked again what the Charles log is. They replied The Apple Developer website provides access to a range of videos covering various topics on using and developing with Apple technologies. You can find these videos on our Development Videos page: http://developer.apple.com/videos. I opened the link and searched for „Charles“ but there were no results, so I asked to kindly point me to the video answering my question. They replied 3 months later (today): Following up on our last message, we believe this issue is either resolved or not reproducible with the information provided and will now consider this report closed internally. This Feedback will no longer be monitored, and incoming messages will not be reviewed. This is not the first time I ask for clarification and get back a message basically telling me that „we won‘t answer any questions you may have and won‘t hear anything you still may have to say about this issue“. They didn‘t even ask me to verify if the issue is resolved or not, like they sometimes do. No, they just shut the door in my face. I just wanted to share this frustrating experience. Perhaps an Apple engineer wants to say something about it or a developer has had a similar experience?

I'm trying to authenticate to a git host using SSH keys stored in 1Password. I have ~/.ssh/config with mode 600 set with a symlink: Host * IdentityAgent "~/.1password/agent.sock" But ssh-add -l shows no identities. If I set $SSH_AUTH_SOCK, ssh-add -l works just fine. I'd love to not have to do this, though. Why doesn't ssh-add seem to read ~/.ssh/config? The built-in version is OpenSSH_10.0p2, LibreSSL 3.3.6. I've searched fruitlessly for an answer anywhere else.

"UITests recording reports 'The capability "Create Service Socket" is not supported by this device.' on M1 chip, but works normally on Intel chip."

currently i'm in xcode 26.2 which want's me to use ios 26.2 but i only have ios 18.2 and i can't figure out how to make xcode use that simulator

I'm adding a few custom signposts with mxSignpost(.begin,...) and mxSignpost(.end,...). Is there a way to force delivery of the MXMetricPayload so I don't need to wait for the daily aggregation to be pushed?

Im getting this specific error 'Apple 403 detected - Access forbidden' when trying to build my app, my previous 10 builds all succesfully work but now it keeps on giving this error. I'm guessing its because of a new agreement email I recieved. But when i got to both developer website and app store connect there is no new agreements to accept. I'm quite stuck. Any help appreciated. Thanks

Calling dlopen then dlclose causes an increase in the amount of memory used by the program. If I create a loop that calls dlopen / dlclose repeatedly on the same dynamic library, memory usage increases continuously. Is this a bug, or am I using dlopen / dlclose incorrectly? I can reproduce this by modifying the sample code in the Apple Developer docs Creating Dynamic Libraries. If I modify Runtime.c, changing the line void *lib_handle = dlopen(lib_name, RTLD_NOW); to add the infinite loop, as below: void *lib_handle = dlopen(lib_name, RTLD_NOW); for (int ii = 0; ; ++ii) { printf("loop %i\n", ii); int close_err = dlclose(lib_handle); printf("close error: %i\n", close_err); printf("dlopen(%s, RTLD_NOW)\n", lib_name); lib_handle = dlopen(lib_name, RTLD_NOW); } then opening and closing the dynamic library will succeed, but memory usage (as reported by top) will rapidly increase. I'm running on x86_64 macOS 13.6.6. Full code for the modified Runtime.c is attached, the rest of the code is available in the Apple Developer docs. Any suggestions? Many thanks, Chris Runtime.c

I am trying to make an app icon 20 x 20 pixel dimension. I cannot get the icon to be sized this way. It gets blurry. I have used adobe express + illustrator. I have not been able to size it. It is a 400 x 400 dimension png. I want the proportion to be 20 x 20 without losing the clarity.

Hello guys, I know people already talked about this here but maybe some of you solved it. When trying Alarmkit, it keeps playing the same default sound. I tried a lot of changes to make it play my custom sound but nothing worked. Has anyone solved this or is it just the alarmkit problem? Thank you and take care guys.

I’ve created a document type for my app and set it up in the Info Configuration in Xcode. This all works as expected: Implemented with the Transferrable API and ShareLink, I can share an app’s file via the Files app or Notes and then import the file via a Share extension and the fileImport swiftUI api. My question is regarding Messages, specifically. It appears as a ShareLink option and I’m able to send my app’s document type via a message, but I’m unable to open it or share it (internally, with my app), other than being able to forward or delete it. If I copy the file, I can’t access it within my app (it’s still stored in the Messages private bundle) and startAccessingSecurityScopedResource returns false as expected. The message does detect the right icon, so it’s recognizing the custom document type. If my Share Extension, exported document type, and transferable implementation is configured correctly, should I be able to open a file for my app shared via Messages? Is this an allowed action? I get various answers from AI, and I can’t test this in the Simulator on pre-26 devices.

Hello, I am experiencing an authentication issue when submitting my Expo iOS app to App Store Connect using the Expo EAS CLI from the terminal. The exact flow is as follows: I run the submit command in the terminal. I am prompted to enter my Apple ID. After entering the Apple ID, I am prompted to enter my Apple ID password. After the password is accepted, I am prompted to enter a 6-digit verification code. I receive the 6-digit code immediately via SMS or phone call. I enter the code correctly and immediately, but the CLI always returns “Invalid code.” This happens every time. Important notes: The Apple ID and password are correct. The 6-digit code is entered immediately and exactly as received. Logging in to App Store Connect via a web browser with the same Apple ID, password, and SMS code works without any issue. The problem only occurs when authenticating through the terminal using Expo EAS CLI. Could you please advise why the verification code is being rejected in the CLI and how I can successfully authenticate and submit my app?

Hello, I have a question about running tests on multiple simulators. Currently, my company has a WDIO+Appium test suite with XCUITEST driver that runs on a single simulator through a mockttp proxy (we are intercepting and mocking some of the responses from our APIs and pass through the rest). In order to route the traffic we are currently using 'networksetup -setsecurewebproxy '. Everything works as expected. With growing number of tests we'd like to scale number of simulators on a single host to 3-5. We have a working setup but the problem are system-wide proxy settings routing traffic from multiple simulators, which we can't distinguish by UDID or any other means, we know of. We can spin multiple mock servers on the same machine but we are struggling to find the way to route the traffic on a simulator basis. In the end, both options are viable: 1 mock server running for multiple simulators N number of mock servers for N number of simulators Has anyone had the same/similar problem? How to approach this? We are currently running on Sequoia OSX and platform version 18.6. Thanks!

Hey guys! I downloaded Apple’s Icon Composer to build my iOS 26 app icon. I exported my SVG from Illustrator (and verified it through Canva and the W3C validator). However, when I import it into Icon Composer, it looks really weird . There are these bubble-like artifacts appearing in the center. Here's my orignal svg icon file trace-logo.txt Any help will be appreciated! Best, Justin

log

I’m a registered iOS developer, and I’ve been facing an issue with installing iOS developer updates for the past couple of years. I can download the updates, but they get stuck at 99.9% complete and don’t finish. I’ve tried following the instructions to force restart the phone, but it stays on the Apple logo screen until it dies. I can update official iOS versions, but not beta versions. To update, I have to put the phone in DFU mode and install the update that way. This is frustrating and prevents me from making timely updates to my app and from diagnosing new issues during testing. I’d like to request that Apple investigate this issue and identify a solution. For reference, I’ve installed a bare-bones version with no new apps, and the problem persists. I would like a resolution that allows me to update normally without having to DFU the phone each time. This occurs via OTA or IPSW manual download and installation. Please refer to the following FB submission numbers: FB21642029 and FB21017894. CAN SOMEONE PLEASE RESPOND BACK TO THIS MESSAGE AND HELP ME TROUBLESHOOT THIS ISSUE?!

On iOS 18, when XCUITest encounters an "Application has not loaded accessibility" error after the 60 second timeout, it performs an undocumented auto-recovery ("Setting up automation session") instead of halting the test as documented. This leaves the XCUITest framework in a corrupted state, causing subsequent tests in the same session to fail with unexpected behavior. Expected Behavior (per Apple documentation): Any failure in the launch sequence will be reported as a test failure and the test will be halted at that point. Actual Behavior: XCUITest waits 60 seconds for accessibility to load Logs "Application has not loaded accessibility" error Instead of halting, performs "Setting up automation session" (auto-recovery) Test continues with corrupted framework state Subsequent tests in the same session fail with phantom element queries Steps Run XCUITest suite on a real iOS 18 device Have an app with moderately heavy initialization (e.g., synchronous network operations during bootstrap) Observe intermittent "accessibility not loaded" errors When error occurs, subsequent tests fail with unexpected behavior Test Logs Evidence First test (accessibility failure + recovery): t = 11.11s Wait for accessibility to load t = 71.14s Capturing diagnostic spindump t = 76.24s Assertion Failure: Application 'com.example.app' has not loaded accessibility t = 76.26s Setting up automation session ← Undocumented recovery t = 77.29s Tear Down Second test (corrupted state): t = 35.01s Tap "signin-button" t = 35.55s Waiting for "bannerButtonStackFirstItem" ← Query NOT in test code! t = 40.58s Assertion Failure: Failed to find element The second test executes element queries that do not exist in its source code, indicating leaked/corrupted state from the previous test's failed recovery. Note: The tearDown() method terminates the app but cannot reset the internal state of the XCUITest framework itself, so corruption persists across tests. We are observing this behavior consistently on iOS 18 real devices. We would like to know: Is this a known issue with XCUITest on iOS 18? Is anyone experiencing similar "accessibility not loaded" failures followed by auto-recovery? Is the "Setting up automation session" recovery behavior intentional or a bug? Is there a recommended workaround to prevent framework state corruption between tests?

Hi there! I am not a coder, but I built an app in ADALO just for in-house use in my company, PetroImaging. The app looked the way I wanted it to in the preview mode in ADALO, but when my app was approved and ready for download in the app store, a lot of content was missing. Many buttons that linked to screens were just gone - even though they were there in the preview and the buttons are formatted correctly in adalo. How can I get my content that I need back on my app so the employees can being using it?