Delve into the world of built-in app and system services available to developers. Discuss leveraging these services to enhance your app's functionality and user experience.

Posts under General subtopic

Post

Replies

Boosts

Views

Activity

Built-in Spin Control?
On and off I've been trying to figure out how to do hang detection in-application (at least from the user's point of view). Qualitatively what I'd like to do is have a process which runs sample(1) on the application after it's been unresponsive for more than a second or so. Basically, an in-app replacement for Spin Control. The problem I've been stuck on is: how do I tell? There used to be Core Graphics SPI (CGSRegisterNotifyProc with a value of kCGSEventNotificationAppIsUnresponsive) for doing this, but it doesn't work anymore (either due to sandboxing or system-wide security changes, I can't tell which but it doesn't matter). One thought I had was to have an XPC service which would expect to receive a checkin once per second from the host (via a timer set up by the host). If it didn't, it would start sample(1). This seems pretty heavyweight to me, since it means that once per second, I'm going to be consuming cycles to check in with the service. But I haven't been able to come up with a scheme that doesn't include some kind of check-in by the target process. Are there any APIs or strategies that I could use to accomplish this? Or is there some entitlement which would allow the application to request "application became unresponsive"/"application became responsive" notifications from the window server?
2
0
1.1k
Feb ’26
How to open parent app from `ShieldActionDelegate`
Hello, I think it is quite a common use-case to open the parent app that owns the ShieldActionDelegate when the user selects an action in the Shield. There are only three options available that we can do in response to an action: ShieldActionResponse.none ShieldActionResponse.close ShieldActionResponse.defer It would be great if this new one would be added as well: ShieldActionResponse.openParentApp While finding a workaround for now, the problem is that the ShieldActionDelegate is not a normal app extension. That means, normal tricks do not work to open the parent app from here. For example, UIApplication.shared.open(url) does not work because we can’t access UIApplication from the ShieldActionDelegate unfortunately. NSExtensionContext is also not available in the ShieldActionDelegate unfortunately, so that’s also not possible. There are apps however, that managed to find a workaround, in my research I stumbled across these two: https://apps.apple.com/de/app/applocker-passcode-lock-apps/id1132845904?l=en-GB https://apps.apple.com/us/app/app-lock/id6448239603 Please find a screen recording (gif) attached. Their workaround is 100% what I’m looking for, so there MUST be a way to do so that is compliant with the App Store guidelines (after all, the apps are available on the App Store!). I had documented my feature request more than 2 years ago in this radar as well: FB10393561
8
3
2.1k
Nov ’25
BadDeviceToken Error in Live Activities
Hello everyone, I’m currently receiving feedback from clients in a production environment who are encountering a BadDeviceToken error with Live Activities, which is preventing their states from updating. However, for other clients, the token is working fine and everything functions as expected. I’m collaborating with the back-end developers to gather more information about this issue, but the only log message we’re seeing is: Failed to send a push, APNS reported an error: BadDeviceToken I would greatly appreciate it if anyone could provide some insight or information on how to resolve this issue.
3
0
635
Nov ’25
iOS Message Filter Extension - deferQueryRequestToNetwork(completion:) error
iOS Message Filter Extension - deferQueryRequestToNetwork(completion:) error I made a test app using the iOS App template and added a target using the Message Filter Extension template which invokes deferQueryRequestToNetwork(completion:) when receiving an SMS. The app and the extension have same "Associated Domains Capabilities" with "messagefilter" pointing to a server which receives query requests and returns proper responses. The extension has the "ILMessageFilterExtensionNetworkURL" key in Info.plist file which specifies the server URL. deferQueryRequestToNetwork(completion:) throws a com.apple.calls.messagefilter error which reads "Extension's containing app (appID ) unauthorized to defer requests to host "
4
0
753
Sep ’25
How to find renamed app using old name in Spotlight?
We are planning on renaming our app. The new name is not like the current name. It will be renamed in the App Store as well as the App display name. Yet, we still want new and existing users to be able to find the app by using the old name in search/spotlight under iOS. A great example of this is entering Twitter to find the X app and it shows up in the App section in the Spotlight search. Are there any guidelines, settings, or tricks for doing this? Some have suggested adding a Spotlight search term but that will not have it show up in the App section I fear.
2
0
911
Oct ’25
Contacts: remove member from group not working on macOS
Hi, In my app, I have an option to remove a contact from a contact group (using the Contacts framework), and it's been working fine till recently users of the macOS version reported that it's not working. I have been using the CNSaveRequest removeMember(contact, from: group) API. The same API works fine on iOS. I'm not sure when it started but it seems to be affecting macOS14.6 as well as 15.1. I was able to reproduce it in a small test project as well, and have the same experience (the API works on iOS but not on macOS), so it definitely seems like a problem with the framework. Can someone confirm this, and/or suggest a workaround? Here's the code I run to test it out ...a simple SwiftUI view that has 4 buttons: Create contact and group Add contact to group Remove contact from group (optional) cleanup by deleting contact and group It's the 3rd step that seems to fail on macOS, but works fine on iOS. Here's the code to test it out: struct ContentView: View { let contactsModel = ContactsStoreModel() var body: some View { VStack (alignment: .center, spacing: 15){ Button ("1. Add Contact And Group") { print("add contact button pressed") contactsModel.addTestContact() if let _ = contactsModel.createdContact { print("created contact success") } } Button ("2. Add Contact To Group") { print("add to group button pressed") contactsModel.addContactToGroup() } Button ("3. Remove Contact From Group") { print("remove from group button pressed") contactsModel.removeContactFromGroup() } Button ("4. Delete Contact and Group") { print("remove from group button pressed") contactsModel.deleteContactAndGroup() } } .padding() } } #Preview { ContentView() } @available(iOS 13.0, *) @objc final class ContactsStoreModel: NSObject, ObservableObject { let contactStore = CNContactStore() var createdContact : CNContact? var createdGroup : CNGroup? public func addTestContact() { let storeContainer = contactStore.defaultContainerIdentifier() let contact = CNMutableContact() contact.givenName = "Testing" contact.familyName = "User" contact.phoneNumbers = [CNLabeledValue(label: "Cell", value: CNPhoneNumber(stringValue: "1234567890"))] let group = CNMutableGroup() group.name = "Testing Group" print("create contact id = \(contact.identifier)") print("create group id = \(group.identifier)") do { let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.add(contact, toContainerWithIdentifier: storeContainer) saveRequest.add(group, toContainerWithIdentifier: storeContainer) try contactStore.execute(saveRequest) createdContact = contact createdGroup = group } catch { print("error in store execute = \(error)") } } public func addContactToGroup() { if let contact = createdContact, let group = createdGroup { do { let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.addMember(contact, to: group) try contactStore.execute(saveRequest) } catch { print("error in store execute = \(error)") } } } public func removeContactFromGroup() { if let contact = createdContact, let group = createdGroup { do { let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.removeMember(contact, from: group) try contactStore.execute(saveRequest) } catch { print("error in store execute = \(error)") } } } public func addGroupAndContact() { let storeContainer = contactStore.defaultContainerIdentifier() let group = CNMutableGroup() group.name = "Test Group" print("create group id = \(group.identifier)") if let contact = createdContact { do { let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.add(group, toContainerWithIdentifier: storeContainer) saveRequest.addMember(contact, to: group) try contactStore.execute(saveRequest) createdGroup = group } catch { print("error in store execute = \(error)") } } } public func deleteContactAndGroup() { if let contact = createdContact, let group = createdGroup { do { let mutableGroup = group.mutableCopy() as! CNMutableGroup let mutableContact = contact.mutableCopy() as! CNMutableContact let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.delete(mutableContact) saveRequest.delete(mutableGroup) try contactStore.execute(saveRequest) } catch { print("error in deleting store execute = \(error)") } } } }
3
1
792
Mar ’26
Caller ID is truncated on IOS 18
We use call directory extension in one of our applications, we notice that call id is truncated on IOS 18. Example: "Grady GmbH" instead of "GRADY ARCHIE, PRICEWATERHOUSECOOPER GMBH" We notice also if we have calls in the history then the caller id is shown correctly. Issue only on IOS 18.
7
2
527
Oct ’25
Screen Time issues after transferring App developer account ownership
After transferring the App ownership to a different account, if you update the app on iOS, two identical apps will show up in Settings > Screen Time. Users can't control the blocking settings from before the update - the only fix is to restart the phone. After the next execution of manageStore.shield.applications, users still can't manually disable the restrictions - their only option is to uninstall and reinstall the app. I believe this is related to how Screen Time API's authentication works - it's not just tied to the app's bundle ID, but also linked to the developer account's organization ID. Any suggestions for a clean solution that would allow smooth app updates after the transfer without running into these issues?
3
1
660
Jan ’26
WeatherKit request fail
Hello, I have an app on the App Store built around WeatherKit and it was working fine, up until this morning when I started seeing errors when using the app. When debugging using Xcode I see the familiar error Failed to generate jwt token for: com.apple.weatherkit.authservice with error: Error Domain=WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors Code=2 "(null)" which, according to what I've read on the forums looks like an authentication error. Attaching a network debugger to the Simulator, I saw this error: This I have tried: Verify that WeatherKit is enabled on both Capabilities and App Services tabs on the Dev Portal. Toggle on/off this value and regenerate Provisioning Profiles Uninstall/reinstall Checking that I have API available calls. Nothing. If I create a new Bundle ID and sign with that, it works correctly. But this is not an option since that will force all my customers to download everything from scratch. I am getting emails from customers demanding money back and I can't figure out what has happened. The only thing I can think of, is that I started developing an Apple Watch app to complement the iOS app, but that was last week and everything was working fine.
7
2
935
Dec ’25
Inquiry about the data format for Live Caller ID Lookup
Hello! https://github.com/apple/live-caller-id-lookup-example/blob/main/Sources/PIRService/PIRService.docc/DataFormat.md The link above shows the data format that the user who gets a call, can get. I wonder if it is also possible to add other fields, for example: "summary". I am currently in the design-phase of an app that aims to present what the last call between the two parties was about, and that information can be gotten from an API that I will build according to Apple's principles that is comaptible with the Live Caller ID Lookup protocol. Therefore adding a field that will present a short summary of the last call will be very handy. Is that possible?
17
0
1.1k
Jul ’25
Allowing workaround for FamilyActivityPicker crash
As discussed and acknowledged here, there is a known bug with the FamilyActivityPicker. When a user expands a category that contains enough tokens to exceed the 50mb memory limit, the FamilyActivityPicker crashes. This happens quite frequently for heavy Safari users. An apple engineer mentioned on this thread that WebDomains shown in the picker are present based on the last 30 days of usage data as surfaced by WebKit. Is there any way a user can clear these WebDomains? Either programatically through our app or any other process we can guide them to as a workaround while this issue is getting fixed?
2
2
748
Aug ’25
iOS app not getting killed after removing from app stack manually.
I am having an app in which we are using NEHotspotHelper to detect wifi changes. when I try to kill the app and network change detected, we are seeing logs in NEHotspotHelper* module and after that we are able see the logs indicating app launched in background. [Application] application(_:didFinishLaunchingWithOptions:), UIApplicationState: 2 But when I checked in the app stack, I couldn't find the app. Then I clicked icon to launch the app, it launched without splash screen as if it came from background. Need your support to understand this is expected behaviour.
3
0
236
Jan ’26
CXCallUpdate not working for outgoing calls
I try to update remoteHandle using CXCallUpdate for outgoing call, but this works only on iOS 15 but not on 17 or 18 (16 didn't test). This problem actual only for outgoing calls, but for incoming calls update works fine. func startOutgoingCall(with callID: UUID, userID: String) { let handle = CXHandle(type: .generic, value: userID) let action = CXStartCallAction(call: callID, handle: handle) callController.requestTransaction(with: action) { [weak self] error in // ... } } func updateOutgoingCall(with callID: UUID, groupID: String) { let update = CXCallUpdate() update.remoteHandle = CXHandle(type: .generic, value: groupID) provider.reportCall(with: callID, updated: update) } I also tried phoneNumber type but it seems initial handle that I set to CXStartCallAction not possible to change (value or even type). I use this handle value to implement recall by tap on call in Recents tab of system address book. But since my calls can transform from p2p to group call, I need to update handle value or find some another way to pass call identification info.
3
1
531
Mar ’26
Translation framework error.
Hello everyone. I use Translation Framework in my application. During development everything was fine, Translation framework worked well, but after two or three days of using the production version (that was published in AppStore and available for others also!) - my application stopped working. Translation framework gives errors: Error sending 1 paragraphs Error Domain=TranslationErrorDomain Code=16 "Translation failed" UserInfo={NSLocalizedDescription=Translation failed, NSLocalizedFailureReason=Offline models not available for language pair} Failed to translate input 0; returning error: Error Domain=TranslationErrorDomain Code=16 "Translation failed" UserInfo={NSLocalizedDescription=Translation failed, NSLocalizedFailureReason=Offline models not available for language pair} Received unbridged NSError to API, converting to .internalError: Error Domain=TranslationErrorDomain Code=16 "Translation failed" UserInfo={NSLocalizedDescription=Translation failed, NSLocalizedFailureReason=Offline models not available for language pair} Once again - it worked when I developed it, it was released on the AppStore, and suddenly it stopped working!
6
3
456
4w
SIM verification on iPhone
Hi, We have a need to provide SIM verification. At present, accessing the phone number bound to the device is not programmatically accessible. Would Apple consider exposing this API via a user consent? Otherwise, what is the suggested approach to verify the SIM card is the correct phone number on an iOS device?
3
0
693
Aug ’25
apple-app-site-association 403
Hi There, hopefully someone can help me here, we weren’t aware but our universal links stopped working sometime last year, as they are not used often on the apps, it wasn’t noticed. We checked all the elements and this is the situation: Our apple-app-site-association file is located at https://ourdomain.com.au/.well-known/apple-app-site-association And it is accessible and can be downloaded. We have Associated Domain services enabled for our app Bundle Id: au.com.identifier.app The Entitlements.plist in our app contains the list of associated domains - the second is the full url, the portal won't let me write it as such as it's not the real address. But links for the first two, …ourdomain.com.au domains don’t work Request https://ourdomain.com.au/.well-known/apple-app-site-association downloads the file and returns status code:403 While checking the availability with https://app-site-association.cdn-apple.com/a/v1/ourdomain.com.au we get the error: ourdomain.com.au: Failed to load resource: the server responded with a status of 404 (Not Found) Going directly to the hosted website: https://app-site-association.cdn-apple.com/a/v1/ourdomain-prod-ourdomainwebsite.azurewebsites.net Returns the json: { "activitycontinuation": { "apps": [ "99ABCD88XXX.au.com.identifier.app", "99ABCD88XXX.au.com.identifier.server.adhoc", "99ABCD88XXX.au.com.identifier.server.dev" ] }, "applinks": { "apps": [], "details": [ { "appID": "99ABCD88XXX.au.com.identifier.app", "paths": [ "/m/" ] }, { "appID": "99ABCD88XXX.au.com.identifier.server.adhoc", "paths": [ "/mt/" ] }, { "appID": "99ABCD88XXX.au.com.identifier.server.dev", "paths": [ "/md/*" ] } ] } } It appears to be something in the redirect from the url but debugging shows nothing obvious. Has anyone experienced this before? Thanks
4
0
283
Oct ’25
Built-in Spin Control?
On and off I've been trying to figure out how to do hang detection in-application (at least from the user's point of view). Qualitatively what I'd like to do is have a process which runs sample(1) on the application after it's been unresponsive for more than a second or so. Basically, an in-app replacement for Spin Control. The problem I've been stuck on is: how do I tell? There used to be Core Graphics SPI (CGSRegisterNotifyProc with a value of kCGSEventNotificationAppIsUnresponsive) for doing this, but it doesn't work anymore (either due to sandboxing or system-wide security changes, I can't tell which but it doesn't matter). One thought I had was to have an XPC service which would expect to receive a checkin once per second from the host (via a timer set up by the host). If it didn't, it would start sample(1). This seems pretty heavyweight to me, since it means that once per second, I'm going to be consuming cycles to check in with the service. But I haven't been able to come up with a scheme that doesn't include some kind of check-in by the target process. Are there any APIs or strategies that I could use to accomplish this? Or is there some entitlement which would allow the application to request "application became unresponsive"/"application became responsive" notifications from the window server?
Replies
2
Boosts
0
Views
1.1k
Activity
Feb ’26
How to open parent app from `ShieldActionDelegate`
Hello, I think it is quite a common use-case to open the parent app that owns the ShieldActionDelegate when the user selects an action in the Shield. There are only three options available that we can do in response to an action: ShieldActionResponse.none ShieldActionResponse.close ShieldActionResponse.defer It would be great if this new one would be added as well: ShieldActionResponse.openParentApp While finding a workaround for now, the problem is that the ShieldActionDelegate is not a normal app extension. That means, normal tricks do not work to open the parent app from here. For example, UIApplication.shared.open(url) does not work because we can’t access UIApplication from the ShieldActionDelegate unfortunately. NSExtensionContext is also not available in the ShieldActionDelegate unfortunately, so that’s also not possible. There are apps however, that managed to find a workaround, in my research I stumbled across these two: https://apps.apple.com/de/app/applocker-passcode-lock-apps/id1132845904?l=en-GB https://apps.apple.com/us/app/app-lock/id6448239603 Please find a screen recording (gif) attached. Their workaround is 100% what I’m looking for, so there MUST be a way to do so that is compliant with the App Store guidelines (after all, the apps are available on the App Store!). I had documented my feature request more than 2 years ago in this radar as well: FB10393561
Replies
8
Boosts
3
Views
2.1k
Activity
Nov ’25
BadDeviceToken Error in Live Activities
Hello everyone, I’m currently receiving feedback from clients in a production environment who are encountering a BadDeviceToken error with Live Activities, which is preventing their states from updating. However, for other clients, the token is working fine and everything functions as expected. I’m collaborating with the back-end developers to gather more information about this issue, but the only log message we’re seeing is: Failed to send a push, APNS reported an error: BadDeviceToken I would greatly appreciate it if anyone could provide some insight or information on how to resolve this issue.
Replies
3
Boosts
0
Views
635
Activity
Nov ’25
iOS Message Filter Extension - deferQueryRequestToNetwork(completion:) error
iOS Message Filter Extension - deferQueryRequestToNetwork(completion:) error I made a test app using the iOS App template and added a target using the Message Filter Extension template which invokes deferQueryRequestToNetwork(completion:) when receiving an SMS. The app and the extension have same "Associated Domains Capabilities" with "messagefilter" pointing to a server which receives query requests and returns proper responses. The extension has the "ILMessageFilterExtensionNetworkURL" key in Info.plist file which specifies the server URL. deferQueryRequestToNetwork(completion:) throws a com.apple.calls.messagefilter error which reads "Extension's containing app (appID ) unauthorized to defer requests to host "
Replies
4
Boosts
0
Views
753
Activity
Sep ’25
How to find renamed app using old name in Spotlight?
We are planning on renaming our app. The new name is not like the current name. It will be renamed in the App Store as well as the App display name. Yet, we still want new and existing users to be able to find the app by using the old name in search/spotlight under iOS. A great example of this is entering Twitter to find the X app and it shows up in the App section in the Spotlight search. Are there any guidelines, settings, or tricks for doing this? Some have suggested adding a Spotlight search term but that will not have it show up in the App section I fear.
Replies
2
Boosts
0
Views
911
Activity
Oct ’25
Contacts: remove member from group not working on macOS
Hi, In my app, I have an option to remove a contact from a contact group (using the Contacts framework), and it's been working fine till recently users of the macOS version reported that it's not working. I have been using the CNSaveRequest removeMember(contact, from: group) API. The same API works fine on iOS. I'm not sure when it started but it seems to be affecting macOS14.6 as well as 15.1. I was able to reproduce it in a small test project as well, and have the same experience (the API works on iOS but not on macOS), so it definitely seems like a problem with the framework. Can someone confirm this, and/or suggest a workaround? Here's the code I run to test it out ...a simple SwiftUI view that has 4 buttons: Create contact and group Add contact to group Remove contact from group (optional) cleanup by deleting contact and group It's the 3rd step that seems to fail on macOS, but works fine on iOS. Here's the code to test it out: struct ContentView: View { let contactsModel = ContactsStoreModel() var body: some View { VStack (alignment: .center, spacing: 15){ Button ("1. Add Contact And Group") { print("add contact button pressed") contactsModel.addTestContact() if let _ = contactsModel.createdContact { print("created contact success") } } Button ("2. Add Contact To Group") { print("add to group button pressed") contactsModel.addContactToGroup() } Button ("3. Remove Contact From Group") { print("remove from group button pressed") contactsModel.removeContactFromGroup() } Button ("4. Delete Contact and Group") { print("remove from group button pressed") contactsModel.deleteContactAndGroup() } } .padding() } } #Preview { ContentView() } @available(iOS 13.0, *) @objc final class ContactsStoreModel: NSObject, ObservableObject { let contactStore = CNContactStore() var createdContact : CNContact? var createdGroup : CNGroup? public func addTestContact() { let storeContainer = contactStore.defaultContainerIdentifier() let contact = CNMutableContact() contact.givenName = "Testing" contact.familyName = "User" contact.phoneNumbers = [CNLabeledValue(label: "Cell", value: CNPhoneNumber(stringValue: "1234567890"))] let group = CNMutableGroup() group.name = "Testing Group" print("create contact id = \(contact.identifier)") print("create group id = \(group.identifier)") do { let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.add(contact, toContainerWithIdentifier: storeContainer) saveRequest.add(group, toContainerWithIdentifier: storeContainer) try contactStore.execute(saveRequest) createdContact = contact createdGroup = group } catch { print("error in store execute = \(error)") } } public func addContactToGroup() { if let contact = createdContact, let group = createdGroup { do { let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.addMember(contact, to: group) try contactStore.execute(saveRequest) } catch { print("error in store execute = \(error)") } } } public func removeContactFromGroup() { if let contact = createdContact, let group = createdGroup { do { let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.removeMember(contact, from: group) try contactStore.execute(saveRequest) } catch { print("error in store execute = \(error)") } } } public func addGroupAndContact() { let storeContainer = contactStore.defaultContainerIdentifier() let group = CNMutableGroup() group.name = "Test Group" print("create group id = \(group.identifier)") if let contact = createdContact { do { let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.add(group, toContainerWithIdentifier: storeContainer) saveRequest.addMember(contact, to: group) try contactStore.execute(saveRequest) createdGroup = group } catch { print("error in store execute = \(error)") } } } public func deleteContactAndGroup() { if let contact = createdContact, let group = createdGroup { do { let mutableGroup = group.mutableCopy() as! CNMutableGroup let mutableContact = contact.mutableCopy() as! CNMutableContact let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.delete(mutableContact) saveRequest.delete(mutableGroup) try contactStore.execute(saveRequest) } catch { print("error in deleting store execute = \(error)") } } } }
Replies
3
Boosts
1
Views
792
Activity
Mar ’26
DeviceActivityReport not showing report data to main app
I am getting this error when I try to show device activity report view by this DeviceActivityReport(appsContext, filter: filter) Attempt to map database failed: permission was denied. This attempt will not be retried. I have taken access by this way. AuthorizationCenter.shared.requestAuthorization(for: .individual)
Replies
3
Boosts
0
Views
1.1k
Activity
Jan ’26
Caller ID is truncated on IOS 18
We use call directory extension in one of our applications, we notice that call id is truncated on IOS 18. Example: "Grady GmbH" instead of "GRADY ARCHIE, PRICEWATERHOUSECOOPER GMBH" We notice also if we have calls in the history then the caller id is shown correctly. Issue only on IOS 18.
Replies
7
Boosts
2
Views
527
Activity
Oct ’25
Screen Time issues after transferring App developer account ownership
After transferring the App ownership to a different account, if you update the app on iOS, two identical apps will show up in Settings > Screen Time. Users can't control the blocking settings from before the update - the only fix is to restart the phone. After the next execution of manageStore.shield.applications, users still can't manually disable the restrictions - their only option is to uninstall and reinstall the app. I believe this is related to how Screen Time API's authentication works - it's not just tied to the app's bundle ID, but also linked to the developer account's organization ID. Any suggestions for a clean solution that would allow smooth app updates after the transfer without running into these issues?
Replies
3
Boosts
1
Views
660
Activity
Jan ’26
WeatherKit request fail
Hello, I have an app on the App Store built around WeatherKit and it was working fine, up until this morning when I started seeing errors when using the app. When debugging using Xcode I see the familiar error Failed to generate jwt token for: com.apple.weatherkit.authservice with error: Error Domain=WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors Code=2 "(null)" which, according to what I've read on the forums looks like an authentication error. Attaching a network debugger to the Simulator, I saw this error: This I have tried: Verify that WeatherKit is enabled on both Capabilities and App Services tabs on the Dev Portal. Toggle on/off this value and regenerate Provisioning Profiles Uninstall/reinstall Checking that I have API available calls. Nothing. If I create a new Bundle ID and sign with that, it works correctly. But this is not an option since that will force all my customers to download everything from scratch. I am getting emails from customers demanding money back and I can't figure out what has happened. The only thing I can think of, is that I started developing an Apple Watch app to complement the iOS app, but that was last week and everything was working fine.
Replies
7
Boosts
2
Views
935
Activity
Dec ’25
Inquiry about the data format for Live Caller ID Lookup
Hello! https://github.com/apple/live-caller-id-lookup-example/blob/main/Sources/PIRService/PIRService.docc/DataFormat.md The link above shows the data format that the user who gets a call, can get. I wonder if it is also possible to add other fields, for example: "summary". I am currently in the design-phase of an app that aims to present what the last call between the two parties was about, and that information can be gotten from an API that I will build according to Apple's principles that is comaptible with the Live Caller ID Lookup protocol. Therefore adding a field that will present a short summary of the last call will be very handy. Is that possible?
Replies
17
Boosts
0
Views
1.1k
Activity
Jul ’25
Managing watch faces on paired Apple Watch
Hi all. Does anyone know if there's a way to get a list of watch faces for a paired Apple Watch or to set the current face? Or is this just not allowed? I've taken a look at the WatchOS, WatchKit, and WatchConnectivity documentation and no luck there.
Replies
2
Boosts
0
Views
574
Activity
Oct ’25
FamilyActivityPicker Title
Is it possible to change the title "Choose Activites" and also remove the search on the FamilyActivityPicker?
Replies
4
Boosts
0
Views
651
Activity
Nov ’25
Language Translation
when we launch the application and change the language from german/french to english or any other language then in also it is changing app language, but bluetooth connection screen with pair or cancel alert is showing on previous selected language. Since that alert is system alert, is there any wayto debug/resolve that issue.
Replies
3
Boosts
0
Views
971
Activity
Apr ’26
Allowing workaround for FamilyActivityPicker crash
As discussed and acknowledged here, there is a known bug with the FamilyActivityPicker. When a user expands a category that contains enough tokens to exceed the 50mb memory limit, the FamilyActivityPicker crashes. This happens quite frequently for heavy Safari users. An apple engineer mentioned on this thread that WebDomains shown in the picker are present based on the last 30 days of usage data as surfaced by WebKit. Is there any way a user can clear these WebDomains? Either programatically through our app or any other process we can guide them to as a workaround while this issue is getting fixed?
Replies
2
Boosts
2
Views
748
Activity
Aug ’25
iOS app not getting killed after removing from app stack manually.
I am having an app in which we are using NEHotspotHelper to detect wifi changes. when I try to kill the app and network change detected, we are seeing logs in NEHotspotHelper* module and after that we are able see the logs indicating app launched in background. [Application] application(_:didFinishLaunchingWithOptions:), UIApplicationState: 2 But when I checked in the app stack, I couldn't find the app. Then I clicked icon to launch the app, it launched without splash screen as if it came from background. Need your support to understand this is expected behaviour.
Replies
3
Boosts
0
Views
236
Activity
Jan ’26
CXCallUpdate not working for outgoing calls
I try to update remoteHandle using CXCallUpdate for outgoing call, but this works only on iOS 15 but not on 17 or 18 (16 didn't test). This problem actual only for outgoing calls, but for incoming calls update works fine. func startOutgoingCall(with callID: UUID, userID: String) { let handle = CXHandle(type: .generic, value: userID) let action = CXStartCallAction(call: callID, handle: handle) callController.requestTransaction(with: action) { [weak self] error in // ... } } func updateOutgoingCall(with callID: UUID, groupID: String) { let update = CXCallUpdate() update.remoteHandle = CXHandle(type: .generic, value: groupID) provider.reportCall(with: callID, updated: update) } I also tried phoneNumber type but it seems initial handle that I set to CXStartCallAction not possible to change (value or even type). I use this handle value to implement recall by tap on call in Recents tab of system address book. But since my calls can transform from p2p to group call, I need to update handle value or find some another way to pass call identification info.
Replies
3
Boosts
1
Views
531
Activity
Mar ’26
Translation framework error.
Hello everyone. I use Translation Framework in my application. During development everything was fine, Translation framework worked well, but after two or three days of using the production version (that was published in AppStore and available for others also!) - my application stopped working. Translation framework gives errors: Error sending 1 paragraphs Error Domain=TranslationErrorDomain Code=16 "Translation failed" UserInfo={NSLocalizedDescription=Translation failed, NSLocalizedFailureReason=Offline models not available for language pair} Failed to translate input 0; returning error: Error Domain=TranslationErrorDomain Code=16 "Translation failed" UserInfo={NSLocalizedDescription=Translation failed, NSLocalizedFailureReason=Offline models not available for language pair} Received unbridged NSError to API, converting to .internalError: Error Domain=TranslationErrorDomain Code=16 "Translation failed" UserInfo={NSLocalizedDescription=Translation failed, NSLocalizedFailureReason=Offline models not available for language pair} Once again - it worked when I developed it, it was released on the AppStore, and suddenly it stopped working!
Replies
6
Boosts
3
Views
456
Activity
4w
SIM verification on iPhone
Hi, We have a need to provide SIM verification. At present, accessing the phone number bound to the device is not programmatically accessible. Would Apple consider exposing this API via a user consent? Otherwise, what is the suggested approach to verify the SIM card is the correct phone number on an iOS device?
Replies
3
Boosts
0
Views
693
Activity
Aug ’25
apple-app-site-association 403
Hi There, hopefully someone can help me here, we weren’t aware but our universal links stopped working sometime last year, as they are not used often on the apps, it wasn’t noticed. We checked all the elements and this is the situation: Our apple-app-site-association file is located at https://ourdomain.com.au/.well-known/apple-app-site-association And it is accessible and can be downloaded. We have Associated Domain services enabled for our app Bundle Id: au.com.identifier.app The Entitlements.plist in our app contains the list of associated domains - the second is the full url, the portal won't let me write it as such as it's not the real address. But links for the first two, …ourdomain.com.au domains don’t work Request https://ourdomain.com.au/.well-known/apple-app-site-association downloads the file and returns status code:403 While checking the availability with https://app-site-association.cdn-apple.com/a/v1/ourdomain.com.au we get the error: ourdomain.com.au: Failed to load resource: the server responded with a status of 404 (Not Found) Going directly to the hosted website: https://app-site-association.cdn-apple.com/a/v1/ourdomain-prod-ourdomainwebsite.azurewebsites.net Returns the json: { "activitycontinuation": { "apps": [ "99ABCD88XXX.au.com.identifier.app", "99ABCD88XXX.au.com.identifier.server.adhoc", "99ABCD88XXX.au.com.identifier.server.dev" ] }, "applinks": { "apps": [], "details": [ { "appID": "99ABCD88XXX.au.com.identifier.app", "paths": [ "/m/" ] }, { "appID": "99ABCD88XXX.au.com.identifier.server.adhoc", "paths": [ "/mt/" ] }, { "appID": "99ABCD88XXX.au.com.identifier.server.dev", "paths": [ "/md/*" ] } ] } } It appears to be something in the redirect from the url but debugging shows nothing obvious. Has anyone experienced this before? Thanks
Replies
4
Boosts
0
Views
283
Activity
Oct ’25