I have an MAUI based application build and ready for the distribution. The application is working perfectly in the debug environment on the simulator. So the app logic is working correctly as expected without any errors. But when a release build is created the application crashes on the simulator and physical device. I'm developing the application using .Net 10 framework with target device iOS 26. The Supported OS Platform is set to 15.0 in csproj file. Also have the entitlements. plist file set in the csproj. The IDe used is Visual Studio Code for Mac (MAC OS). The application uses MSAL for the login / authentication purpose (Microsoft.Identity.Client) and SQLite Database (Sqlite-net-pcl) Message: Kindly guide me to build the application correctly in release version and get the ipa file ready for the in house distribution that could be deployed correctly on the physical device with iOS 18 / 26.

Weirdness going on here. Our app is crashing on startup with iPad 7s running iOS 18.5. Before updating to iOS 18.5, it was working fine on iPad 7s. Even with iOS 18.5, it is working fine on every device we have tried including dozens of other iPads and iPhones. We have narrowed it down to the SquareReaderSDK. If we remove that SDK, it will launch and work without issues. But, many of our users need the SquareReaderSDK. The crash happens at app load, before appDelegate didFinishLaunchingWithOptions. So we can't figure out any way to debug the issue. Is anyone else having a similar issue? Square thinks it is an Apple issue.

I am trying to make an app icon 20 x 20 pixel dimension. I cannot get the icon to be sized this way. It gets blurry. I have used adobe express + illustrator. I have not been able to size it. It is a 400 x 400 dimension png. I want the proportion to be 20 x 20 without losing the clarity.

Hi, I am having an issue with xcodebuild -showdestinations command. Steps to reproduce: Create a new iOS application project in Xcode or use an existing one. Navigate to this project in a terminal. Run xcodebuild -project 'your-project-name.xcodeproj' -scheme 'your-scheme' -showdestinations What I expect: All destinations available in the Xcode UI should be listed. What I get: It depends. For new projects, I consistently get only generic platform destinations and my connected physical device. When I run the same command on an older project, I sometimes see all the expected destinations. It seems to be a roughly 50/50 chance between the two outcomes. Is there a way to get consistent results from xcodebuild -showdestinations? What can I do to ensure all destinations are listed reliably? Here is a more detailed log and a screenshot: ❯ xcodebuild -workspace 'WorkoutDiary.xcworkspace' -scheme 'WorkoutDiary' -showdestinations Command line invocation: /Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild -workspace WorkoutDiary.xcworkspace -scheme WorkoutDiary -showdestinations User defaults from command line: IDEPackageSupportUseBuiltinSCM = YES 2025-06-17 19:13:50.261 xcodebuild[34753:6177985] DVTDeviceOperation: Encountered a build number "" that is incompatible with DVTBuildVersion. 2025-06-17 19:13:50.342 xcodebuild[34753:6177959] [MT] DVTDeviceOperation: Encountered a build number "" that is incompatible with DVTBuildVersion. Resolve Package Graph Resolved source packages: <REDACTED> Available destinations for the "WorkoutDiary" scheme: { platform:macOS, arch:arm64, variant:Designed for [iPad,iPhone], id:<REDACTED>, name:My Mac } { platform:iOS, arch:arm64, id:<REDACTED>, name:<REDACTED> } { platform:iOS, id:dvtdevice-DVTiPhonePlaceholder-iphoneos:placeholder, name:Any iOS Device } { platform:iOS Simulator, id:dvtdevice-DVTiOSDeviceSimulatorPlaceholder-iphonesimulator:placeholder, name:Any iOS Simulator Device } ❯ xcodebuild -workspace 'WorkoutDiary.xcworkspace' -scheme 'WorkoutDiary' -showdestinations Command line invocation: /Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild -workspace WorkoutDiary.xcworkspace -scheme WorkoutDiary -showdestinations User defaults from command line: IDEPackageSupportUseBuiltinSCM = YES 2025-06-17 19:13:52.393 xcodebuild[34757:6178035] DVTDeviceOperation: Encountered a build number "" that is incompatible with DVTBuildVersion. 2025-06-17 19:13:52.472 xcodebuild[34757:6178020] [MT] DVTDeviceOperation: Encountered a build number "" that is incompatible with DVTBuildVersion. Resolve Package Graph Resolved source packages: <REDACTED> Available destinations for the "WorkoutDiary" scheme: { platform:macOS, arch:arm64, variant:Designed for [iPad,iPhone], id:<REDACTED>, name:My Mac } { platform:iOS, arch:arm64, id:<REDACTED>, name:<REDACTED> } { platform:iOS, id:dvtdevice-DVTiPhonePlaceholder-iphoneos:placeholder, name:Any iOS Device } { platform:iOS Simulator, id:dvtdevice-DVTiOSDeviceSimulatorPlaceholder-iphonesimulator:placeholder, name:Any iOS Simulator Device } { platform:iOS Simulator, id:DBFB9613-0261-4544-908A-335570F3C35F, OS:18.3.1, name:iPhone 11 } { platform:iOS Simulator, id:A48C309C-231A-4197-A295-900F89C94D86, OS:18.3.1, name:iPhone 16 Pro Max }

Hello, I'm encountering an issue when trying to build and launch a Flutter app on a physical iOS device using Android Studio. Here is the full log: `Launching lib/main.dart on （iPhone Name） in debug mode... Automatically signing iOS for device deployment using specified development team in Xcode project: （Project ID） Running Xcode build... Xcode build done. 19.7s Failed to build iOS app Could not build the precompiled application for the device. Error (Xcode): Target debug_unpack_ios failed: Exception: Failed to codesign （Project Names）/build/ios/Debug-iphoneos/Flutter.framework/Flutter with identity （identity ID）. Error launching application on （iPhone Name）.` This only happens when using Android Studio. When I build the same project using Xcode, it runs fine on the same device. Background: I accidentally deleted all Apple accounts from Xcode recently. In Keychain Access, I had three identical certificates; I deleted the older two and kept the newest one. I suspect this may be related to provisioning or code signing, but I’m not sure how to resolve it within Android Studio. Any advice or steps to fix this would be greatly appreciated. I created a new test project in Xcode using the iOS > App template, enabled automatic signing in Signing & Capabilities, and selected my team.
 I then tried building and installing the app on a real device, and it worked successfully.
 This confirms that there are no issues with code signing or provisioning on the Apple side.
 Thanks in advance!

i am trying to create key for apn file to use it in firebase fcm for my app but when click on download this error occured Download Failed Auth Key can only be downloaded once. This auth key has already been downloaded. what should i do ?

Hello, PrivacyInfo.xcprivacy Is primordial and without it the app is rejected from the Store I believe. All 5 ressources I had found related to it, mention XCODE, or explain how to add the code to langages that I don't use (Switf i think?) etc. I am building the app thought CI/CD, so prior to building it the app does not have privacy manifest and there is not way to generate it automatically without xcode it seems. My app is written in Flutter prior to becoming an iOS app. I am seeking for a method to do that. Thanks.

Hello, According to documentation, the App Store does not re-download the entire app when updating, but instead generates an update package containing only the changed content compared to the previous version. I’d like to clarify the following points: 1. Granularity of file changes If only part of a large file changes, does the update package include the entire file, or does it patch only the modified portions within that file? 2. Guideline on separating files The documentation recommends separating files that are likely to change from those that are not. How should this be interpreted in practice? 3. Verifying the diff result Is there a way for developers to check the actual diff result of the update package generated by the App Store without submitting the app? Is there a diff command tool or comparison method closer to the actual App Store update process? 4. Estimating update size during development For apps with large-scale resources, minimizing update size is critical. Are there any tools or best practices to estimate the size of the update package before submitting to the App Store? Any clarification or reference materials would be greatly appreciated. Thank you.

First time user here. Trying to build my React-Native app on xcode. I keep getting "Could not build Module" and "missing package product" and tried many combination for my Podfile. I am on macbook pro M2, XCode version 16.2, building on iphone 16 v18.3.1. Pod version 1.16.2, react-native-cli:2.0.1, Here is my Podfile. I tried to assign modular_headers to individual Firebase packages but then I cant pod install. require_relative '../node_modules/react-native/scripts/react_native_pods' require_relative '../node_modules/@react-native-community/cli-platform-ios/native_modules' use_modular_headers! platform :ios, '18.0' prepare_react_native_project! target 'plana' do config = use_native_modules! use_react_native!( :path => config[:reactNativePath], :fabric_enabled => false, :app_path => "#{Pod::Config.instance.installation_root}/.." ) post_install do |installer| react_native_post_install( installer, config[:reactNativePath], :mac_catalyst_enabled => false, ) end end

I am developing a simple watch app and I use my personal watch for development with Xcode. Personal watch is series 10 gps only. I have two other watches that I want to use for testing the app, but not needing them to be connected to Xcode. The test watches have cellular option, and I need a cell plan per watch because the watches need to be standalone, not counting initial setup. To get the standalone cell plan the watches need to be configured using AWFK. Here is what I have tried/current issues. I switch between all three watches on my phone using the watch app. Originally tried to put test watches in developer mode, thinking I would connect to Xcode, developer mode is not available when watch is setup using AWFK. Pushed the watch app to apple connect, setup TestFlight group, added the test users and my phone user, accepted invites TestFlight is installed on my phone, I see the testflight setup for the watch app I set a test watch using watch app on the phone, run install for the test app from TestFlight on the phone, spinner moves for awhile then goes back to Install. I am not able to get the watch app installed on the test watches from the phone. Is what I am attempting to do supported? I haven't found much specific documentation on this. If I pair the test watches as regular watches, set them to developer mode, can I pair them again as AWFK and will developer mode survive the switch? Or is there something really simple that I'm overlooking? Appreciate any help that can be extended.

In the online documentation for InstallerJS, it is stated that the unit for the availableKilobytes property of the target field is kilobytes. Isn't it actually bytes because of a bug in the very first release of macOS that supported InstallerJS? [Q] Has there been a fix in the recent years regarding this property that would explain why the documentation says it's kilobytes? Even though at the time of this writing, the unit is still bytes when you call my.target.availableKilobytes I'm using this call to dump the value of this property in install.log: system.log(my.target.availableKilobytes + ''); Ref. https://developer.apple.com/documentation/installer_js/target/1811975-availablekilobytes (FB20448952)

Merhaba, iOS üzerinde bir sözleşme onay uygulaması geliştiriyorum. Kullanıcıların dijital ortamda sözleşmeleri okuyup onaylaması gerekiyor. Ancak hukuki geçerlilik konusunda bazı tereddütlerim vardı. Bursa’da yaşayan biri olarak bu konuda bir avukata danışmam gerekti. Şans eseri https://www.avukatcanata.com ile karşılaştım ve hem bireysel hem ticari sözleşmeler konusunda gerçekten çok net açıklamalar sundular. Özellikle elektronik imza ve KVKK uyumu hakkında verdikleri bilgiler sayesinde projemi yasal zemine oturtabildim. Eğer bu tarz uygulamalar geliştiriyorsanız, mutlaka bir hukukçu görüşü alın. Yanlış bir adım size veya kullanıcınıza ciddi sonuçlar doğurabilir. Teşekkürler 🍏

With the latest (26) version of Apple's developer tools, is there a way to manually attach a debugger (other than lldb) to an iOS app launched with "devicectl device process launch --start-stopped"? In the past, this was possible via the ios-deploy third-party tool (now defunct), which provided a debugserver port. This information is notably missing when using devicectrl – although the process ID of the launch process is provided, and the tool is clearly aimed at letting you launch and attach to processes from the command line. lldb can, of course, attach via its built-in support for this using the device set of commands. But I'm explicitly looking for a way to attach my own debugger via the GDB-compatible debug proxy.

Hi there, I am trying to create my first iOS app using Visual Studio (Win 11) and .NET MAUI. I created a developer account and if I want to start the debugger with my local device, VS forces me to Configure Automatic Provisioning. I can select my configured account but the operation fails (see screenshot). I have no idea what is going wrong and I cannot find any setting in the developer account to fix this problem. Can anyone help me out, what is wrong and how to fix, thx!

I am working on an iOS app and I want to achieve on demand module download inside the app when the user clicks on the module icon which he wants to use. The idea is that we have a super app consisting of multiple modules say four independent apps/features and I want to separate each one so that when the user selects a specific app/feature, it’s downloaded on demand and then opened directly within the same super app resulting in a lower app size initially I want to upload all the code of all modules to app store connect but when the user downloads the app, then only one module's code should be available to the user, the rest of the module's code should be downloaded when the user wants to use that module. I know apple restricts downloading new code but in my case I want to upload all the code to app store for review but just give option to the user to get rest of the code when needed. Any guidance, architectural advice, or example implementations would be highly appreciated.

Up to now I've been building my x64 binaries on Sequioa specifying a target macOS level of 13.4. That worked fine. In an attempt to debug a problem that was causing some pain I created a 13.4 x64 build environment and tried to build the code there. This code: using CacheKeyType = std::filesystem::path; using CacheValueType = std::tuple<LoadedImage, int, bool>; // <image, lastUse, currentlyLoading> using CacheType = std::unordered_map<CacheKeyType, CacheValueType>; friend class ThreadLoader; static inline constexpr int16_t MAXIMAGESINCACHE = 20; static inline constinit std::atomic_int age{ 0 }; static inline std::shared_mutex rwMutex{}; static inline CacheType imageCache{}; got me the following errors: /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX13.3.sdk/usr/include/c++/v1/__hash_table:838:5: error: static_assert failed due to requirement 'integral_constant<bool, false>::value' "the specified hash does not meet the Hash requirements" static_assert(__check_hash_requirements<_Key, _Hash>::value, ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX13.3.sdk/usr/include/c++/v1/__hash_table:853:1: note: in instantiation of template class 'std::__enforce_unordered_container_requirements<std::filesystem::path, std::hash<std::filesystem::path>, std::equal_to<std::filesystem::path>>' requested here typename __enforce_unordered_container_requirements<_Key, _Hash, _Equal>::type ^ /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX13.3.sdk/usr/include/c++/v1/unordered_map:1152:30: note: while substituting explicitly-specified template arguments into function template '__diagnose_unordered_container_requirements' static_assert(sizeof(__diagnose_unordered_container_requirements<_Key, _Hash, _Pred>(0)), ""); ^ /Users/amonra/.vs/DSS/build/DeepSkyStackerKernel/DeepSkyStackerKernel_autogen/EWIEGA46WW/../../../../DeepSkyStackerKernel/imageloader.h:60:26: note: in instantiation of member function 'std::unordered_map<std::filesystem::path, std::tuple<LoadedImage, int, bool>>::~unordered_map' requested here static inline CacheType imageCache{}; ^ 2 errors generated. Which isn't "mega-helpful" :( I thought that specifying: set(CMAKE_OSX_DEPLOYMENT_TARGET 13.4 CACHE STRING "Minimum operating system version for deployment" FORCE) would have made the compilations use the same headers as for Ventura above, but it seems not? Is this to be expected?

I am integrating On Demand Resources into my Unity game. The resources install without any problems if the internet connection is stable: all resources are installed. While testing various scenarios without an internet connection, I encountered the following problem: if I turn off the internet during installation, I don't get any error messages, but if I turn the internet back on, the download no longer continues (and I still don't get an error). If I reopen the application with a stable internet connection, the download will always be at 0%. Please tell me what I am doing wrong. #import "Foundation/Foundation.h" #if ENABLE_IOS_ON_DEMAND_RESOURCES #import "Foundation/NSBundle.h" #endif #include <string.h> struct CustomOnDemandResourcesRequestData; typedef void (*CustomOnDemandResourcesRequestCompleteHandler)(struct CustomOnDemandResourcesRequestData* handler, const char* error); #if ENABLE_IOS_ON_DEMAND_RESOURCES struct CustomOnDemandResourcesRequestData { NSBundleResourceRequest* request; }; extern "C" CustomOnDemandResourcesRequestData* CustomOnDemandResourcesCreateRequest(const char* const* tags, int tagCount, CustomOnDemandResourcesRequestCompleteHandler handler) { NSMutableArray* tagArray = [NSMutableArray array]; for (int i = 0; i < tagCount; i++) { const char* tag = tags[i]; if (tag != NULL) { [tagArray addObject:[NSString stringWithUTF8String:tag]]; } } NSSet* tagSet = [NSSet setWithArray:tagArray]; CustomOnDemandResourcesRequestData* data = new CustomOnDemandResourcesRequestData(); data->request = [[NSBundleResourceRequest alloc] initWithTags:tagSet]; [data->request beginAccessingResourcesWithCompletionHandler:^(NSError* error) { dispatch_async(dispatch_get_main_queue(), ^{ const char* errorMessage = error ? [[error localizedDescription] UTF8String] : NULL; handler(data, errorMessage); }); }]; return data; } extern "C" void CustomOnDemandResourcesRelease(CustomOnDemandResourcesRequestData* data) { [data->request endAccessingResources]; delete data; } extern "C" float CustomOnDemandResourcesGetProgress(CustomOnDemandResourcesRequestData* data) { return data->request.progress.fractionCompleted; } extern "C" float CustomOnDemandResourcesGetLoadingPriority(CustomOnDemandResourcesRequestData* data) { float priority = (float)data->request.loadingPriority; return priority; } extern "C" void CustomOnDemandResourcesSetLoadingPriority(CustomOnDemandResourcesRequestData* data, float priority) { if (priority < 0.0f) priority = 0.0f; if (priority > 1.0f) data->request.loadingPriority = NSBundleResourceRequestLoadingPriorityUrgent; else data->request.loadingPriority = (double)priority; } extern "C" const char* CustomOnDemandResourcesGetResourcePath(CustomOnDemandResourcesRequestData * data, const char* resource) { NSString* resourceStr = [NSString stringWithUTF8String: resource]; NSString* path = [[data->request bundle] pathForResource: resourceStr ofType: nil]; if (path == nil) { return NULL; // или другое значение по умолчанию } const char* result = strdup([path UTF8String]); // копируем строку return result; // в C# нужно будет освободить память } extern "C" void CustomOnDemandResourcesFreeString(const char* str) { free((void*)str); } #else // ENABLE_IOS_ON_DEMAND_RESOURCES struct CustomOnDemandResourcesRequestData { }; extern "C" CustomOnDemandResourcesRequestData* CustomOnDemandResourcesCreateRequest(const char* const* tags, int tagCount, CustomOnDemandResourcesRequestCompleteHandler handler) { CustomOnDemandResourcesRequestData* data = new CustomOnDemandResourcesRequestData(); if (handler) handler(handlerData, NULL); return data; } extern "C" void CustomOnDemandResourcesRelease(CustomOnDemandResourcesRequestData* data) { delete data; } extern "C" float CustomOnDemandResourcesGetProgress(CustomOnDemandResourcesRequestData* data) { return 0.0f; } extern "C" float CustomOnDemandResourcesGetLoadingPriority(CustomOnDemandResourcesRequestData* data) { return 0.0f; } extern "C" void CustomOnDemandResourcesSetLoadingPriority(CustomOnDemandResourcesRequestData* data, float priority) { } extern "C" const char* CustomOnDemandResourcesGetResourcePath(CustomOnDemandResourcesRequestData * data, const char* resource) { return NULL; } extern "C" void CustomOnDemandResourcesFreeString(const char* str) { } #endif // ENABLE_IOS_ON_DEMAND_RESOURCES

Hello, I'm building this mobile app using Quasar - Capacitor on iOS. The app is working perfectly, but I'm encountering an issue whenever I push the rep I get this error: "Error Unable to open base configuration reference file '/Volumes/workspace/repository/ios/App/Pods/Target Support Files/Pods-App/Pods-App.release.xcconfig'. App.xcodeproj:1" I've tried every possible solution and made sure that everything is set perfectly. Can anyone please help me with that? Thanks in advance, appreciate you 🫶🏻

My App is not compatible with iPhone 15 but can run on iPhone 14 perfectly fine, what could be the problem? I am new to App development.

So, as we found out from WWDC, the migration to Apple Silicon is inevitable. Does anyone have a good recommendation for a replacement for Macintosh Common Lisp on Apple Silicon? I was using it back in the MPW days and struggling to keep the Lisp code working, but Apple Silicon has thrown a money wrench at it! Thanks in advance for any advice on any available Apple Silicon Lisp development tools!