The Push Notifications Console now includes metrics for notifications sent in production through the Apple Push Notification service (APNs). With the console’s intuitive interface, you’ll get an aggregated view of delivery statuses and insights into various statistics for notifications, including a detailed breakdown based on push type and priority. Introduced at WWDC23, the Push Notifications Console makes it easy to send test notifications to Apple devices through APNs. Learn more.

Team-scoped keys introduce the ability to restrict your token authentication keys to either development or production environments. Topic-specific keys in addition to environment isolation allow you to associate each key with a specific Bundle ID streamlining key management. For detailed instructions on accessing these features, read our updated documentation on establishing a token-based connection to APNs.

I am sending push notification using HTTP/2 to https://api.push.apple.com:443 api but I am getting Operation TimeOut error in response . Can someone help

Hi, we've observed a weird behavior for a small amount of our user that we keep receiving the same token from APNs despite it's shown as Unregistered. When we try to send push to the token, we got an Unregistered error so we remove that token from our server. However, later we would receive an add token request from the client with the same token we just removed, and when we try to send to the token it returns Unregistered again so we remove the token again. This happened 3 times for a user in an hour. The identifierForVendor remains the same for all the requests. We also owns the client and I've checked client code that it's sending the token it received from didRegisterForRemoteNotificationsWithDeviceToken to the server.

Dear Team, Hope You are dong good! Problem Description:- We are facing a huge delay in receiving IOS Push notifications on concerned devices. Found System.Timeout.Exception Error in IOS Logs(Screenshot & Recent Logs attached) Found a network delay between service installed servers & APNS(Apple Push Notification Service) Destination URL & Ports using in Push Notification service:- api.push.apple.com api.development.push.apple.com Destination Port-443 Also Found the error(TCP reset From server) between source(service installed server) & Destination (Apple Push Notification Service)-Screenshot attached Please have a look around the above  points & requesting advice regarding the below:- How to resolve this delay in reaching IOS push Notifications in concerned devices? Should we call more URL’s from services? If yes please provide URL’s/Ports to be opened from services ? Awaiting your Replies, Thanks,

Hello everyone, I have been working on a macOS app that utilizes push notifications for the past year. Up until recently, everything was functioning correctly. However, now I'm experiencing issues where push notifications are either not being delivered at all or are experiencing significant delays, sometimes up to 10 minutes. Setting the priority header to 10 hasn't made any difference. I am currently using development push notifications, but the issue persists when switching to the production environment. I'm curious if anyone else has encountered similar problems. When checking the push console, it frequently reports that the device is offline, even though it's actually online ("discarded as device was offline"). Occasionally, notifications are delivered promptly, but this is becoming increasingly infrequent. This issue has been consistently reported by our testers, particularly after they updated to macOS Sonoma. Any insights or assistance you can provide would be greatly appreciated.

This error has been continuously occurring for about 9 hours. We have not replaced the certificate, modified the server code, or changed the firewall policy. Some requests succeed, but many are timing out, with several timeouts occurring every minute. We are unable to find the cause. Please help. APNS Exception io netty channel ConnecttimeException: Connection timed out
APNSOutboundHandler api.push.apple.com/17.188.169.28:443 api.push.apple.com/(other ip):443 api.push.apple.com/(other ip):443 api.push.apple.com/(other ip):443 api.push.apple.com/(other ip):443 ...

I am looking for advice for debugging a wallet pass not updating for some customers after successfully posting an APNS notification (pass identifier as topic, no expiration, priority 10). Is there an exhaustive list of reasons for a wallet pass not updating or a guide for making sure updates happen reliably? Are there are any guarantees made as to when the pass is updated? We noticed it is either never updating or the update happens much later for some customers. Usually toggling "Automatic Updates" in Pass Details updates the pass immediately for affected customers. Can it be caused by an error in the implementation of the Wallet Passes Web Service? We generate passes on the fly as a response to /v1/passes/{passTypeIdentifier}/{serialNumber}. I noticed that we also sometimes receive HEAD requests to this endpoint despite the documentation only mentioning the GET method. I was previously returning a HTTP status code 405 (Method Not Allowed). I have now updated it to also respond with headers (Content-Type, Content-Disposition and Last-Modified) for the pass for HEAD requests, but I don't know if it makes a difference. Here is a list of issues on the customer side I was thinking of: No connection to the internet Low power mode (does it prevent or throttle updates?) What happens if there is an error? Does it keep trying or does it just fail silently? In the latter case it might make sense to keep sending APNS notifications until the pass is requested successfully. I know that you can use the PassKit framework in iOS apps to update (replace) passes. Would this be more reliable than a stand-alone Wallet pass?

I am an iOS development engineer. Recently, I updated the Xcode version to 16.1 (16B40) and updated my debugging device (iPhone 15) to iOS 18.1.1. However, I found that I could not respond to the delegate method. I confirmed that my code, certificate, Xcode settings, and network environment had not changed. Simply executing application.registerForRemoteNotifications() in func application(_ application: UIApplication, didFinishLaunchingWithOptions launchOptions: [UIApplication.LaunchOptionsKey: Any]?) -> Bool did not receive a response(didRegisterForRemoteNotificationsWithDeviceToken or didFailToRegisterForRemoteNotificationsWithError ). In the same environment, when I switched to another device for debugging (iOS 17.0.3), the delegate method would respond. I really don't know what to do, I hope someone can help me, I would be very grateful. Please note: Everything is normal when using devices before iOS 18.1.1 version

Push message on the lock-screen disappears in one specific instance. In general the situation is as follows: the application, upon starting up, sets the badge counter (i.e. notificationCenter.setBadgeCount(3)) the application is being sent to background the screen is locked (it doesn't matter if it's turned on or not) send a push message to the application and set the badge (in aps) to "0" What happens: the screen lights up (unless it's lit up already), the push is being displayed for a very short time and gets hidden. Happens on iOS 18.1, 18.1.1, 18.2. If not setting badge in the aps keys it works correctly. I've created a feedback report https://feedbackassistant.apple.com/feedback/16095572. I am able to reproduce the issue on a sample app 100% of the time :/

Dear Apple Engineer Recently we found that our push delivery rate has decreased. On the website "https://icloud.developer.apple.com/dashboard/notifications/teams/43Y657P48S/app/com.taobao.fleamarket", we found that starting from January 8, 2025, "Discarded - Token Unregistered" showed an upward trend, from millions to tens of millions. We have not found the reason, and hope you can help us. Team ID: 43Y657P48S Bundle ID: com.taobao.fleamarket Here are some failed tokens, in "Device Token Validator" The query is valid, but the user cannot receive the message: 56025f656cc3aa701898037f59e8d0cb937263ff5585cd1cec9ae661dcc15b19 5fbbd1e604d3662d7583e9377676f8fa276005145278d6dea04b4fc85a7b070e f0970602551f8d249d8f97960a74006ad78688b52fec6b0d19a585 207caff62e 9388fb40209c100afc2db728342f6fe86c7e34787a8fe4a92b73d2503c5286e0 a2819a4708462588b07452ed827d9afb03c343b586e70dcb67a9981f76295704 8949373cd43783fa3e23d38d55ee1fd72475b39f9c2d2fedca3ecb925b094240 Best Regards!

I am developing an application that uses NetworkExtension (Local PUSH function) And VoIP(APNs) PUSH. Nowadays, I found a problem on this app doesn't handle incoming call of Local PUSH when receiving a Local PUSH after receiving an APNs PUSH. My confimation result of my app and server log is below. 11:00 AM: my server(PBX) requests a VoIP(APNs) PUSH notification to the APNs. But my app does not receive the VoIP(APNs) PUSH. At this time, my app is running on LAN (Wi-Fi without internet connection), as a result, NetworkExtension was running. so I think this is normal behaviour. 14:55:11 PM: There is an incoming call from the my server(PBX) via local net, and NetworkExtension calls iOS API(API name is reportIncomingCall). However, iOS does not call the delegate didReceiveIncomingCallWithUserInfo for the reportIncomingCall. 14:55:11 PM: At almost the same time, iOS calls the delegate cdidReceiveIncomingPushWithPayload of VoIP PUSH. (instead of call the delegate didReceiveIncomingCallWithUserInfo for the reportIncomingCall?) And the content of this VoIP(APNs) PUSH was the incoming call at "11:00 AM". In other words, the VoIP(APNs) PUSH at 11:00 AM is stuck inside iOS, and at 14:55:11 PM, from NetworkExtension reports it. I feel there is a problem on iOS doesn't handle incoming call of Local PUSH when receiving a Local PUSH after receiving an VoIP(APNs) PUSH. Would you tell me Apple's opioion about this? If this is known problem, Please tell me about it.

PLATFORM AND VERSION: iOS Development environment: Other: .net MAUI with vscode Run-time configuration: iOS 18.1.1 DESCRIPTION OF PROBLEM APNS notifications of apns-push-type pushtotalk sometimes stop arriving after switching networks. STEPS TO REPRODUCE We have created a simple app which can be used to deminstrate this issue. When you launch the app it displays the APNS token which you can then use fromn the Apple Push Console to manually send it PTT push notifications. https://github.com/trampster/PttPushNotificationIssue On an iPhone SE (we havn't been able to reproduce on our iPhone 11) Start the APP to register for the APNS push notifications Turn off the WiFi wait for 5 seconds Attempt a push to the app manually using the Push Notifications Console (this should fail, which is fine) Turn on Cellular and wait for it to connect Attempt to push to the app manually using the Push Notifications Console -> This fails, and all attempts to send an pushtotalk push notifications fail until the we switch network again. Send a push while offline before connecting to the new network seems to make it happen more often but hard to tell for sure. The results of the failed push in the console look like this: Delivery LogLast updated: 30/01/25, 16:45:06 GMT+13 Refresh 30 Jan 2025, 16:45:03.661 GMT+13 received by APNS Server 30 Jan 2025, 16:45:03.662 GMT+13 discarded as device was offline The device is actually very much online. Switching networks again oftern makes things come right. But it doesn't seem to come right by itself. We can't respond to network changes and do anything as the whole point of using push-to-talk push notifications is to wake up the app when in the background to answer a call, this means we are not running and therefore cannot respond to network changes to try to work arround this issue.

We are attempting to update our app to use the PTT framework, as it has been made clear that this will be required in a future iOS version as opposed to using the Unrestricted VoIP entitlement we are using for several features of our app. However, the behavior of this framework poses some problems with implementing our app's functionality: It is not possible to programmatically join a channel when the app is not in the foreground. This hinders our ability to implement the Automatically activate radio stream feature of our app, which allows users who have opted into this feature to immediately begin hearing live PTT audio from their agency following an incident alert. Having the app constantly "joined to a channel" and using the restoration delegate could potentially work, however this is not ideal as this would result in the PTT UI needing to be displayed at all times, even when no radio stream is activated. We have a "Text to Speech" option that, when enabled, reads out the content of an incident alert after the alert sound has played. This currently happens by triggering an AVSpeechSynthesizer in the PushKit incoming push callback. It may be possible to render TTS audio on the fly in a Notification Service Extension and assign it as the notification's sound, if that is possible this is less of a problem. We also use the PushKit callback to, again if the user has enabled it, activate a "Shake to Respond" feature, allowing a short period of time after receiving an incident alert in which the user can shake their device to indicate that they are responding to the incident. There does not appear to be any way to have the level of background execution required to implement this using an NSE, and this is of course beyond the scope of the PTT framework. What options do we have to be able to continue to provide this functionality, without risk of it being disabled in a future iOS version?

I am developing a VoIP service. Usually, when receiving a VoIP Push, Callkit is exposed immediately after receiving the message and the app is designed to be used. However, there is an extremely intermittent phenomenon (not well reproduced) where the app does not wake up even when receiving a VoIP Push. And after a long time, the app wakes up and Callkit is activated. (A long time after receiving the call…) Has anyone experienced the above phenomenon? I wonder if there are any reported parts depending on the OS version. (I have identified that it does not occur in the 17.x version, but it is difficult to guarantee because it occurs extremely intermittently) The app is not running in the background, but... Could this be happening if there are a lot of pending operations in the background? I need help urgently

Hello guys, We have updated our app icon, and it is correctly reflected in our app build and assets. However, the push notification icon is still displaying the old version for some users. ✅ We have verified that: All icon assets in Assets.xcassets match the new icon. The app icon has been updated in Info.plist. The app has been resubmitted and approved on the App Store. ❌ However, some users still see the old notification icon, even after reinstalling the app. Restarting the device does not always resolve the issue. Could you provide insights into how iOS caches notification icons and how we can force a refresh for all users?

Hi! I have set up an APNS API that sends push notifications to update my Apple Wallet pass. I am using the APN library and a .p8 key for APNS push notifications. I keep getting 200 responses and "sent successfully" logs, but Apple Wallet is not receiving the notification. Which configuration or payload should I check to make it work? Thanks

ITMS-90078: Missing potentially required entitlement - Your app, or a library that’s included in your app, uses Apple Push Notification service (APNs) registration APIs, but the APS Environment Entitlement isn’t included in the app signature’s entitlements. If your app uses APNs, make sure the App ID is enabled for push notifications in Certificates, Identifiers & Profiles, sign the app with a distribution provisioning profile that includes the APS Environment Entitlement, and upload a new build to ensure that push notifications function as intended. For details, visit: https://developer.apple.com/documentation/usernotifications/registering-your-app-with-apns.

Is it possible for an iOS app to programmatically detect if its built for TestFlight/App Store distribution versus built for development? The motivation for doing this is so that the app can detect if a push server should send pushes using the Apple production server or the sandbox server - when the app sends the push token to the server, I'd like it to additionally send an indicator to the server so the server knows which of the Apple servers to use. Is there a way to achieve this? TIA

So I submitted my app for TestFlight external testing and got this email: ITMS-90078: Missing potentially required entitlement - Your app, or a library that’s included in your app, uses Apple Push Notification service (APNs) registration APIs, but the APS Environment Entitlement isn’t included in the app signature’s entitlements. If your app uses APNs, make sure the App ID is enabled for push notifications in Certificates, Identifiers & Profiles, sign the app with a distribution provisioning profile that includes the APS Environment Entitlement, and upload a new build to ensure that push notifications function as intended. For details, visit: https://developer.apple.com/documentation/usernotifications/registering-your-app-with-apns. But here's the thing: everything this says is 100% bogus. My app uses no libraries and no push notification service registration APIs. The term register is used in my app, because I use table view cell registrations. Could that be the cause of this bogus warning?

Hello, I'm from Microsoft team maintaining push notification api behind Teams platform. We are experiencing strange and short error spikes towards APNS that seem to mostly correlate worldwide. We checked the networking and push request code but could not find what could be causing this. These error spikes are all timeouts or connection resets (by remote host, ie. APNS servers) and seem to come and go randomly: Would it be possible to check this for outages or some other metrics on your side or investigate why would it happen? Since it's worldwide it seems unlikely it's something broken on our side. We are using the standard APNS http2 endpoint with modern support for all RFC features (so everything should work normally). Mind you, our api might be in a unique position because of the volume of notifications (in the billions per day).

Hi, am facing an issue related to voip push notifications getting delivered 1-2 hours after apns-expiration to 0 and apns-priority to 10. I had raised a similar post got a reply that it may be due to network delay. But network delay can cause the delivery of voip push to be delayed only by few seconds or minutes. But in our case voip push is getting delivered hours after the voip call was attempted. Steps to reproduce: Put our voip app in background and lock iPhone. As app is put in background, socket connections gets disconnected from server. Now if a caller makes call to this app, the call should be delivered through voip push. 2) Voip push should ideally be received even if app is in background and iPhone is locked. It is connected to a good wifi network. But it does not receive the voip push. 3) After 1-2 hours user unlocks iPhone and opens voip app. As soon as user opens app, the voip push is received and phone starts ringing.