Our goal is to establish a Wi‑Fi Aware data path (NDP) between Apple and Android devices. Apple will act as the Publisher, and Android will act as the Subscriber. Apple-to-Android pairing has already been completed. The Android device can be normally displayed on the Apple official Wi-Fi Aware Sample. However, the indicator is not green. During pairing, the Apple log shows: state: authenticated, and the Android side triggers the callback onPairingSetupSucceeded. During pairing verification, the Apple log shows: state: authenticated, and the Android side triggers the callback onPairingVerificationSucceed. The Android side sends an NDP request to Apple (as shown in the figure 1), but Apple does not reply. Note: Qualcomm’s NDI and NMI are different. In addition, after Apple-to-Apple pairing is completed, the paired device will be recorded in “Settings → Privacy & Security → Paired Devices”. However, after Android-to-Apple pairing is completed, the device is not saved to this list. My iPhone model: iPhone 13, iOS 26.0 (23A5287g).

Hi, I had a few questions regarding the multicast networking entitlement. What are the criteria for approval? Do ad-hoc multicast protocols fall under the approval criteria? How long do approvals for multicasting generally take?

Hi Dev Forums and Quinn "The Eskimo!", Short version Is there sample NWConnection code available that behaves in a similar way to the higher level URLSession and URLRequest APIs? Long version I have not been able to make this question get past the "sensitive language filter" on the dev forums. I figured it might be 'fool' or 'heck', or the X link, but removing each of those still triggers the sensitive language filter. Please see this gist: https://gist.github.com/lzell/8672c26ecb6ee1bb26d3aa3c7d67dd62 Thank you! Lou Zell

After App uses Network.framework PrivacyContext Api, dns has been encrypted, that is good. But when using wkwebview to load web page, wireshark captures normal dns request sent by wkwebview. Does wkwebview use DoH to resolve domain? if can, how to config params? If can not, is there anyway to stop wkwebview sending normal dns, such as local proxy.

Our watchOS app is exploring adding audio VOIP calling capability using our in-home platform. We are using LiveCommunicationKit for this and have that all hooked up nicely in a proof of concept implementation. Our use case is primarily based around supporting end-users through various tasks with assistance from a remotely based expert. We would like for our platform to be able to display visual content on the watch's screen during the call – in other words, we would like to be able to treat this as a video call. LiveCommunicationKit fully supports all video-related flags on watchOS and doesn't appear to have any different symbol availability versus its iOS version. This high-quality thread (https://developer.apple.com/forums/thread/798090) from a DTS engineer suggests that our use case should be valid (i.e. whiteboarding apps) and that the system's response to an accepted income video call is to dismiss the LCK's incoming call screen and bring the target app to the foreground, allowing it to render its custom content. Unfortunately, on watchOS the system doesn't seem to treat a video call any differently from an audio call, and won't dismiss the system UI once it's answered. We fully realize that Apple Watch doesn't have a camera for outbound video, doesn't support VideoToolbox or other low-level video convenience libraries for simplified rendering and decoding, etc. That's not what we're worried about (yet). The documentation is at best unclear about whether LCK (or CallKit, for that matter) can hand off calls flagged as video-compatible according to how we think they should, which is passing foreground UI over to the app once the call has been accepted by the user. Can any Apple people shed some light on this? I recognize we are probably trying to do something not many people have before.

Furuno AP(EW750) is sending EAPOL M1 message, but Iphone16 is not responding with EAPOL M2 message, Hence Iphone16 is unable to connect to Qualcomm based AP with MLO suiteb encryption. Issue impact: All the Iphone16 users cannot connect to WiFi7 AP with MLO suiteb encryption globally. Predominantly, Iphone users tend to connect to more secured wifi networks using WPA3 suiteb encryption, hence many of the iphone users will experience the connectivity issue significantly. Topology: AP Hardware: Furuno WiFi7 AP(EW770) The Furuno WiFi7 AP uses Miami IPQ5332 with waikiki radio QCN9274 (Qualcomm based chipset) AP software: SPF12.2 CSU3 IPhone16 software: (18.3.1 or 18.5 ) I phone16 wifi capabilities: 802.11 b/a/g/n/ac/ax/be Radius server details: Radius server: Laptop running with Ubuntu Radius package: 3.0.26dfsggit20220223.1.00ed0241fa-0ubuntu3.4 Version: 3.0.26 Steps: Power on the Wi-Fi 7 Access Point with the Miami chipset, and flash it with the SPF 12.2 CSU3 image. Enable both 5 GHz and 6 GHz radios on the AP. Enable MLO (Multi-Link Operation) in 6Ghz & 5Ghz, set MLD address different from radio address and configure Suite-B (192-bit) encryption On the Linux laptop, set up the RADIUS server with EAP-TLS authentication method. Once the above steps are completed, take the iPhone 16 and follow the steps below to install the RADIUS client certificates on the device. On the sniffer laptop, switch the Wi-Fi adapter to monitor mode, configure the required channel, and begin packet capture. Check SSID is broadcasting, then connect the iPhone 16 to . Verify if the client (iPhone 16) connects to the SSID using WPA3-Enterprise, MLO, and Suite-B encryption by checking the wireless capture on both the AP and iPhone sides. Support needed from Apple team: We would request Apple team to analyse and enable the IPhone16 users to connect to advanced security WPA3 Suiteb by resolving the issue. Below is our analysis and observation for your reference. As per IEEE, MLD mac address can be set to the same or different from radio address, Iphone16 is not accepting EAPOL M1 message if source address(MLD) is different from radio address. IPhone16 is accepting EAPOL M1 if the source address(MLD) is set to the same as the radio address and responds with M2 message IPhone16 is not accepting EAPOL M1 if source address(MLD) set to different from radio address and fails to respond with M2 message. sysdiagnose.log log-file log-file Please let us know additional logs are required.

There appears to be some unexplained change in behaviour in the recent version of macos 15.6.1 which is causing the BSD socket sendto() syscall to no longer send the data when the source socket is bound to a IPv4-mapped IPv6 address. I have attached a trivial native code which reproduces the issue. What this reproducer does is explained as a comment on that code's main() function: // Creates a AF_INET6 datagram socket, marks it as dual socket (i.e. IPV6_V6ONLY = 0), // then binds the socket to a IPv4-mapped IPv6 address (chosen on the host where this test runs). // // The test then uses sendto() to send some bytes. For the sake of this test, it uses the same IPv4-mapped // IPv6 address as the destination address to sendto(). The test then waits for (a maximum of) 15 seconds to // receive that sent message by calling recvfrom(). // // The test passes on macos (x64 and aarch64) hosts of versions 12.x, 13.x, 14.x and 15.x upto 15.5. // Only on macos 15.6.1 and the recent macos 26, the test fails. Specifically, the first message that is // sent using sendto() is never sent (and thus the recvfrom()) times out. sendto() however returns 0, // incorrectly indicating a successful send. Interesting, if you repeat sendto() a second message from the // same bound socket to the exact same destination address, the send message is indeed correctly sent and // received immediately by the recvfrom(). It's only the first message which goes missing (the test uses // unique content in each message to be sure which exact message was received and it has been observed that // only the second message is received and the first one lost). // // Logs collected using "sudo log collect --last 2m" (after the test program returns) shows the following log // message, which seem relevant: // ... // default kernel cfil_hash_entry_log:6088 <CFIL: Error: sosend_reinject() failed>: // [86868 a.out] <UDP(17) out so 59faaa5dbbcef55d 127846646561221313 127846646561221313 age 0> // lport 65051 fport 65051 laddr 192.168.1.2 faddr 192.168.1.2 hash 201AAC1 // default kernel cfil_service_inject_queue:4472 CFIL: sosend() failed 22 // ... // As noted, this test passes without issues on various macosx version (12 through 15.5), both x64 and aarch64 but always fails against 15.6.1. I have been told that it also fails on the recently released macos 26 but I don't have access to such host to verify it myself. The release notes don't usually contain this level of detail, so it's hard to tell if something changed intentionally or if this is a bug. Should I report this through the feedback assistant? Attached is the source of the reproducer, run it as: clang dgramsend.c ./a.out On macos 15.6.1, you will see that it will fail to send (and thus receive) the message on first attempt but the second one passes: ... created and bound a datagram dual socket to ::ffff:192.168.1.2:65055 ::ffff:192.168.1.2:65055 sendto() ::ffff:192.168.1.2:65055 ---- Attempt 1 ---- sending greeting "hello 1" sendto() succeeded, sent 8 bytes calling recvfrom() receive timed out --------------------- ---- Attempt 2 ---- sending greeting "hello 2" sendto() succeeded, sent 8 bytes calling recvfrom() received 8 bytes: "hello 2" --------------------- TEST FAILED ... The output "log collect --last 2m" contains a related error (and this log message consistently shows up every time you run that reproducer): ... default kernel cfil_hash_entry_log:6088 <CFIL: Error: sosend_reinject() failed>: [86248 a.out] <UDP(17) out so 59faaa5dbbcef55d 127846646561221313 127846646561221313 age 0> lport 65055 fport 65055 laddr 192.168.1.2 faddr 192.168.1.2 hash 201AAC1 default kernel cfil_service_inject_queue:4472 CFIL: sosend() failed 22 ... I don't know what it means though. dgramsend.c

Hi, i have a crash received in my Firebase Crashlytics. I couldn't figure out the root cause of the issue. Could anyone please help me with it. Crashed: com.apple.CFNetwork.Connection 0 libobjc.A.dylib 0x20b8 objc_retain_x19 + 16 1 CFNetwork 0x47398 HTTP3Fields::appendField(NSString*, NSString*) + 72 2 CFNetwork 0x41250 invocation function for block in HTTP3Stream::_buildRequestHeaders() + 240 3 CoreFoundation 0x249f0 __NSDICTIONARY_IS_CALLING_OUT_TO_A_BLOCK__ + 24 4 CoreFoundation 0x565dc ____NSDictionaryEnumerate_block_invoke_2 + 56 5 CoreFoundation 0x55b10 CFBasicHashApply + 148 6 CoreFoundation 0x8abfc __NSDictionaryEnumerate + 520 7 CFNetwork 0x793d4 HTTP3Stream::scheduleAndOpenWithHandler(CoreSchedulingSet const*, void (__CFHTTPMessage*, NSObject<OS_dispatch_data>*, CFStreamError const*) block_pointer, void (unsigned char) block_pointer) + 1120 8 CFNetwork 0x1665c HTTPProtocol::useNetStreamInfoForRequest(MetaNetStreamInfo*, HTTPRequestMessage const*, unsigned char) + 4044 9 CFNetwork 0x80c80 HTTP3ConnectionCacheEntry::enqueueRequestForProtocol(MetaConnectionCacheClient*, HTTPRequestMessage const*, MetaConnectionOptions) + 2540 10 CFNetwork 0x7fab8 HTTP3ConnectionCacheWrapper::ingestTube(Tube*, bool) + 2924 11 CFNetwork 0x257dc TubeManager::newTubeReady(Tube*, CFStreamError) + 4284 12 CFNetwork 0x57b64 invocation function for block in TubeManager::_onqueue_createNewTube(HTTPConnectionCacheKey*) + 72 13 CFNetwork 0x2fe30 Tube::_onqueue_invokeCB(CFStreamError) + 360 14 CFNetwork 0x2fc20 NWIOConnection::_signalEstablished() + 652 15 CFNetwork 0x4ba1c invocation function for block in NWIOConnection::_handleEvent_ReadyFinish() + 748 16 CFNetwork 0x4b5b0 invocation function for block in Tube::postConnectConfiguration(NSObject<OS_tcp_connection>*, NSObject<OS_nw_parameters>*, void () block_pointer) + 860 17 CFNetwork 0x4b220 BlockHolderVar<std::__1::shared_ptr<NetworkProxy>, bool, CFStreamError>::invoke_normal(std::__1::shared_ptr<NetworkProxy>, bool, CFStreamError) + 64 18 CFNetwork 0x32f2c ProxyConnectionEstablishment::postProxyConnectionConfiguration(__CFAllocator const*, std::__1::shared_ptr<TransportConnection>, NSObject<OS_nw_parameters>*, __CFHTTPMessage*, HTTPConnectionCacheKey*, std::__1::shared_ptr<MetaAuthClient>, SmartBlockWithArgs<std::__1::shared_ptr<NetworkProxy>, bool, CFStreamError>) + 664 19 CFNetwork 0x32bbc Tube::postConnectConfiguration(NSObject<OS_tcp_connection>*, NSObject<OS_nw_parameters>*, void () block_pointer) + 744 20 CFNetwork 0xc19b0 invocation function for block in NWIOConnection::_setupConnectionEvents() + 2360 21 libdispatch.dylib 0x132e8 _dispatch_block_async_invoke2 + 148 22 libdispatch.dylib 0x40d0 _dispatch_client_callout + 20 23 libdispatch.dylib 0xb6d8 _dispatch_lane_serial_drain + 744 24 libdispatch.dylib 0xc214 _dispatch_lane_invoke + 432 25 libdispatch.dylib 0xd670 _dispatch_workloop_invoke + 1732 26 libdispatch.dylib 0x17258 _dispatch_root_queue_drain_deferred_wlh + 288 27 libdispatch.dylib 0x16aa4 _dispatch_workloop_worker_thread + 540 28 libsystem_pthread.dylib 0x4c7c _pthread_wqthread + 288 29 libsystem_pthread.dylib 0x1488 start_wqthread + 8 [Here is the complete crash report.](https://developer.apple.com/forums/content/attachment/58b5bb7d-7c90-4eec-906c-4fb76861d44b)

Title / Summary Crash in libquic.dylib when app is backgrounded and issues an HTTP/3 request Description On iOS 26, the app crashes inside libquic.dylib while performing a network request using HTTP/3 (QUIC) after the app has moved to the background. The crash happens within low-level QUIC / libquic internals. Reproduction Steps Launch the app, perform normal operations. Background the app (press home / switch away). While in background, trigger a network request that uses HTTP/3 / QUIC. Observe that the app crashes (stack trace pointing into libquic.dylib). Expected Behavior The HTTP/3 request in background should either be handled gracefully (fail or complete) without causing a crash; the app must not be terminated due to internal libquic failures. Actual Behavior The app crashes with signals/exceptions coming from libquic.dylib (in the QUIC / packet building / encryption / key state logic) when a HTTP/3 request is made in background. Environment / Device Information • OS: iOS 26 • Device: iPhone 13 Pro Max • Network environment: (Wi-Fi / Cellular) • HTTP/3 support: enabled in URLSession / Network framework Stack Trace： 8eedc0df3d914b0faf8def9af3b21574-symbolicated.crash

In our iOS application, we need to list available WiFi networks so that users can select one for device configuration. Here's the workflow: Initially, the hardware device acts as a WiFi Access Point (AP). The app should scan for nearby WiFi networks to detect the device's AP. The app connects temporarily to this AP and sends the selected WiFi credentials to the device. The device then connects to the selected WiFi network and stops broadcasting its AP. Is this flow achievable on iOS? We understand that Apple restricts access to WiFi scanning APIs — are there any supported methods (e.g., using NEHotspotHelper) or entitlements (such as MFi) that could enable this?

Hi, We're hoping someone can help us determine why we're running into some odd behavior where a simple HTTP request is intermittently failing with error code NSURLErrorTimedOut (-1001) Background: HTTP request details: The request is sent from a PacketTunnelProvider and is meant to be a Captive Portal check. The request is insecure (HTTP, instead of HTTPS) but we have configured App Transport Security (ATS) to allow insecure HTTP loads from this hostname. See info.plist excerpt below. The request is sent using NSMutableURLRequest/NSURLSessionDataTask using an Ephemeral session configuration. We only modify 2 properties on NSMutableURLRequest The timeoutInterval property is set to 5 seconds. The allowsCellularAccess property is set to NO. No headers or other configuration are modified. NSURLSessionDataTask completionHandler receives an NSError: We checked the NSError's userInfo dictionary for an underlying error (NSUnderlyingErrorKey). The underlying error shows the same code NSURLErrorTimedOut (-1001). We haven't seen any underlying errors with code NSURLErrorAppTransportSecurityRequiresSecureConnection (-1022) . On a laptop, we confirmed that the Captive portal check site is accessible and loads correctly. Laptop and iOS device are on the same Wi-fi. I've witnessed the error in the debugger, and been able to load the site on my laptop at the same time. So, we don't have any reason to believe this is server related. The PacketTunnelProvider is configured to only handle DNS queries and is not intercepting/routing the HTTP traffic. The DNS query for the Captive portal request is handled correctly. In fact, outside of the PacketTunnelProvider, all sites load in Mobile Safari. So, we're not breaking internet on this device. In other words, we have no reason to believe our DNS handling is interfering with the HTTP request since other HTTP requests are working as expected. We setup CFNetwork Diagnostic Logging (https://developer.apple.com/documentation/network/debugging-https-problems-with-cfnetwork-diagnostic-logging) In console.app, we are able to find some logging on the Timeout See excerpt from Console.app's log below. We confirmed that the nscurl tool did not flag the request (https://developer.apple.com/documentation/security/identifying-the-source-of-blocked-connections) All ATS tests run with nscurl were successful. See nscurl command used below. Questions: What are next steps to debug this intermittent timeout? What should we look for in the CFNetwork Diagnostic Logging to help debug the issue further? Thanks in advance for your help! ATS configuration setup in both the UI and the PacketTunnel's info.plist file: <key>NSAppTransportSecurity</key> <dict> <key>NSExceptionDomains</key> <dict> <key>subdomain.subdomain.example.com</key> <dict> <key>NSExceptionAllowsInsecureHTTPLoads</key> <true/> <key>NSIncludesSubdomains</key> <true/> </dict> </dict> </dict> Excerpt from Console.app's log: CFNetwork Example PacketTunnel 10836 Diagnostics default 11:30:33.029032-0700 CFNetwork Diagnostics [3:834] 11:30:32.946 { Did Timeout: (null) Loader: request GET http://subdomain.subdomain.example.com/content/cpcheck.txt HTTP/1.1 Timeout Interval: 5.000 seconds init to origin load: 0.000592947s total time: 5.00607s total bytes: 0 } [3:834] nscurl command $ /usr/bin/nscurl --ats-diagnostics --verbose http://subdomain.subdomain.example.com/content/cpcheck.txt

Hi, Since iOS 26 (and any other apple system with a 26 version) there is a very weird behavior in the whole apple ecosystem (iOS, iPadOS, macOS and visionOS). I'm self-hosting a web project called mempool (https://github.com/Retropex/mempool). This project is entirely self-hosted on my own infrastructure, so I have advanced control to be sure it's just not an anti-DDoS feature that makes the bug happen. So the bug is once I visit my website, for example this page (https://mempool.guide/tx/d86192252a6631831e55f814aea901e65407b6dbda77e1abdea8ec27861e9682) the OS will lose the ability to connect to the underlying IP of the domain (mempool.guide) but the issue seems to affect only the HTTPS/HTTP port (443/80). The issue is system wide, not only is Safari. For exemple I have another domain that resolve to the same IP (haf.ovh) and if this link above trigger the bug then I will also lose the ability to connect to https://haf.ovh A temporary fix that I have is that if I turn off wifi/cellular then I turn it on again I can connect again to my server again until the bug is triggered again. I have done test with tcpdump on my server and the connection isn't making it to my server that's why I think it's an OS issue, especially given the fix above. This issue can be reproduced on any apple device out of the box with a system with >v26. All device (Mac, iPad, iPhone, vision) with version pre-26 are completely unaffected by the bug and can freely explore the website without loosing the connection macOS is less affected by this bug, it can be random with it. With iOS/iPadOS it's systematic. Another thing to note is that the same URL on firefox/chrome for iOS doesn't trigger the bug. Let me know if anyone has an idea on what's going on. Thanks, Léo.

Reproduce Same SIM card with 4G, same testing location, connected to the same server, xcode debugging game applications, network/profile retrotransmitted, Avg round trip to view data iPhone17， Turn off 4G and turn on WiFi. All the above indicators are acceptable iPhone17， Turn on 4G, turn off WiFi, retry with retransmission and very high Avg round trip iPhone14-16， Turn on 4G and turn off WiFi. All the above indicators are acceptable App Unity3d project .netframe4.0 C# Socket Other Many developers in Chinese forums have provided feedback on this issue

I have some confusion around the usage of DeviceDiscoveryUI. The documentation suggests that it is available only on TVOS. But with the recent announcement of WifiAware, it has been used in iOS devices as well. Within DeviceDiscoveryUI, the DevicePicker or the DevicePairingView documentation seems to be available with iOS. Is this just a documentation mistake? Followup - Can I use DeviceDiscoveryUI's DevicePicker/ DevicePairingView to discover devices through Bonjour and then establish a connection through Network framework?

The CA/Browser Forum has voted (cf. https://groups.google.com/a/groups.cabforum.org/g/servercert-wg/c/9768xgUUfhQ?pli=1) to eventually reduce the maximum validity period for a SSL certificate from 398 days to 47 days by March 2029. This makes statically pinning a leaf certificate rather challenging. What are the consequences for App Transport Security Identity Pinning as it exists today?

Hi everyone 👋 I’m running into a persistent SSL issue on iOS where the app fails to establish a secure HTTPS connection to our backend APIs. The same endpoints work fine on Android and web, but on iOS the requests fail with: Error Domain=NSURLErrorDomain Code=-1200 "An SSL error has occurred and a secure connection to the server cannot be made." UserInfo={ NSLocalizedDescription = "An SSL error has occurred and a secure connection to the server cannot be made."; _kCFStreamErrorDomainKey = 3; _kCFStreamErrorCodeKey = -9802; } 🔍 What I’ve Checked: The servers use valid, trusted SSL certificates from a public CA TLS 1.2 and 1.3 are enabled The intermediate certificates appear correctly configured (verified using SSL Labs) The issue happens on our customer's end. (Got it via Sentry) Note: We recently removed NSAppTransportSecurity(NSAllowsArbitraryLoads) on our app, since all the endpoints use valid HTTPS certificates and standard configurations. ❓ Questions: Are there additional SSL validation checks performed by iOS when ATS is enabled? Has anyone seen similar behaviour, where valid certificate chains still trigger SSL errors? Any insights or debugging suggestions would be greatly appreciated 🙏

When CHIPS was introduced in 18.4 it worked well, however on 18.5 it does not appear to work. There do not appear to be release notes about this in 18.5, so can someone provide definitive if this is a defect that will be fixed, or have they already been deprecated?

Hi, I have some questions regarding the Background Assets Extension and DeviceCheck framework. Goal: Ensure that only users who have purchased the app can access the server's API without any user authentication using for example DeviceCheck framework and within a Background Assets Extension. My app relies on external assets, which I'm loading using the Background Assets Extension. I'm trying to determine if it's possible to obtain a challenge from the server and send a DeviceCheck assertion during this process within the Background Assets Extension. So far, I only receive session-wide authentication challenges—specifically NSURLAuthenticationMethodServerTrust in the Background Assets Extensio. I’ve tested with Basic Auth (NSURLAuthenticationMethodHTTPBasic) just for experimentation, but the delegate func backgroundDownload( _ download: BADownload, didReceive challenge: URLAuthenticationChallenge ) async -> (URLSession.AuthChallengeDisposition, URLCredential?) is never called with that authentication method. It seems task-specific challenges aren't coming through at all. Also, while the DCAppAttestService API appears to be available on macOS, DCAppAttestService.isSupported always returns false (in my testing), which suggests it's not actually supported on macOS. Can anyone confirm if that’s expected behavior?

Hey everyone, I’m developing an app for visionOS where I need to display the Apple Vision Pro’s current IP address. For this I’m using the following code, which works for iOS, macOS, and visionOS in the simulator. Only on a real Apple Vision Pro it’s unable to extract an IP. Could it be that visionOS currently doesn’t allow this? Have any of you had the same experience and found a workaround? var address: String = "no ip" var ifaddr: UnsafeMutablePointer<ifaddrs>? = nil if getifaddrs(&ifaddr) == 0 { var ptr = ifaddr while ptr != nil { defer { ptr = ptr?.pointee.ifa_next } let interface = ptr?.pointee let addrFamily = interface?.ifa_addr.pointee.sa_family if addrFamily == UInt8(AF_INET) { if let name: Optional<String> = String(cString: (interface?.ifa_name)!), name == "en0" { var hostname = [CChar](repeating: 0, count: Int(NI_MAXHOST)) getnameinfo(interface?.ifa_addr, socklen_t((interface?.ifa_addr.pointee.sa_len)!), &hostname, socklen_t(hostname.count), nil, socklen_t(0), NI_NUMERICHOST) address = String(cString: hostname) } } } freeifaddrs(ifaddr) } return address } Thanks in advance for any insights or tips! Best Regards, David

Hello everyone, We are currently facing an issue when testing our hybrid mobile application (built with Ionic and Angular) on the iOS Simulator. The app works perfectly on physical iOS devices — all HTTP requests complete successfully. However, when running the same build on the iOS Simulator, every HTTP request fails with the following error: { "headers": { "normalizedNames": {}, "lazyUpdate": null, "headers": {} }, "status": 0, "statusText": "Unknown Error", "url": "https://api.bizify.com.br/demo/api/ping", "ok": false, "name": "HttpErrorResponse", "message": "Http failure response for https://api.bizify.com.br/demo/api/ping: 0 Unknown Error", "error": { "isTrusted": true } } We have confirmed that the API endpoint https://api.bizify.com.br/demo/api/ping is reachable and secured with a valid SSL certificate. This issue occurs only in the iOS Simulator — not on Android devices or physical iOS devices. Has anyone encountered this issue before? Any insights on why the iOS Simulator might be blocking or failing these HTTPS requests — and how we could resolve it — would be greatly appreciated.