Hi, The fitness features such as distance moved, steps, calories burned is it in HealthKit or in a different kit ? couldn't find any API in HealthKit ? Also for example how can Apple Watch distinguish that this amount of steps was walked and not moved by a slow car or a scoter for example ? Kindest Regards

I developed an iPhone/Watch app with the single target setting (new method) for Watch app projects, which will be available from Xcode14. This app uses HealthKit to retrieve information such as step count and heart rate from healthcare. The watch app is not independent and requires the iPhone app (companion app). Regarding the permission to access health care, i found some differences from the Old WatchApp Project (application project structure using WatchExtension when Xcode 13.4 or lower is used). This does not occur in the iPhone simulator or watch simulator, but only on the actual device. Both the iPhone app and watch app now display a dialog to allow access to health care In the Old WatchApp Project, if access was granted in either app, the granted access is synchronized. When checking the Health Care access status in the iPhone Settings App, permission settings for both the iPhone app and watch app are displayed independently. Because each permission setting is independent, you can choose to allow access to the iPhone app but not to allow it to the watch app. the Old WatchApp Project, permission settings for the iPhone app and watch app were synchronized, so it was not possible to have different settings for each. These behaviors are not described in the documentation. It would be understandable if the transition from watch "extension" to watch "app" is to split the app into two separate units. However, since there is no official documentation explaining this, i cannot determine whether this is the correct specification or not. Furthermore, since the companion app is required rather than a separate Watch app, having the Health Care permission settings out of sync with the companion app could cause unexpected problems and worsen the user experience. (It would be difficult and cumbersome for the user to know what settings they have made). Is there a solution to synchronize this behavior with the companion app like as the Old WatchApp Project? Do i have to go back to the project configuration (use of watchExtension) before Xcode13? I have prepared a sample project below that can test the above. https://github.com/HayakawaAKIRA/SingleTargetWatchOSApp-HealthKit reference: https://developer.apple.com/videos/play/wwdc2022/10133/ https://developer.apple.com/documentation/watchkit/wkapplication https://developer.apple.com/documentation/healthkit/setting_up_healthkit

Even if you have granted read permission for specific health data items (such as walking, weight, etc.), calling the function below will return the permission as 'sharingDenied'. How can I obtain 'sharingAuthorized'? let stepType = HKObjectType.quantityType(forIdentifier: .stepCount)! let authorizationStatus = HKHealthStore().authorizationStatus(for: stepType) //authorizationStatus => sharingDenied

The app I distribute has a function that retrieves step count information from the "Healthcare" app and displays it on the app, but depending on the device, the step count may not be retrieved. When I checked the settings of the "Healthcare" app, I found that it was properly linked to the app, but for some reason I was unable to retrieve it. Is there any countermeasure in such a case? Is there anyone who has experienced a similar incident?*The same issue occurs even if the device is changed and the same Apple ID is used, so I think it is caused by the Apple ID.

Im able to reconnect to BLE device in the back ground app refresh, but Im not receiving next back ground app refresh continuation. Can someone help me with this

Hi guys, I'm delveloping an app that use HealthData. I use this data: HKWorkoutType.workoutType(), HKObjectType.quantityType(forIdentifier: .heartRate)!, HKObjectType.quantityType(forIdentifier: .distanceSwimming)! I would like use Simulator to test app, but there aren't data. How can I import data? Now to test my app use only my iPhone, but in this way I don't test multiple device to test my app. Could you help me? Thank you. Filippo

For some reason I am not receiving HKQuantityTypeIdentifierDistanceSwimming samples when using the watchOS 10 beta (8). The same code works fine on watchOS 9 but not on watchOS 10. I have tried specifically enabling them in the collection types for the live builder and /or starting a query for them, but neither approach is causing any samples to be returned to the app. Is this a known issue? Has something changed for swimming in watchOS 10? Thanks in advance.

When the build a multi-device workout app sample project is ran, there is a problem that stops workouts from being logged with only the watch. When the workout is started from the Apple Watch with the iPhone app closed, you can usually end the workout from the watch in the first few seconds. However, if the workout lasts more than 30 seconds, when the workout is ended via the watch, everything will stall for multiple minutes or indefinitely until the iPhone app is opened. How is it reccommended to fix this issue? It makes the sample project unusable for production as is because many users may want to sometimes log a workout with their watch without the iPhone present. I haven't been able to figure out a good solution, can someone please help with this.

I was wondering which of the hkquantitytypeidentifiers I can collect while a workout is running. Essentially which of these types are actually being collected by the sensors on the apple watch rather than being read from manual input. Thanks

If a "Minimum Deployment Target" is updated to WatchOS7 on a product(iOS app with a companion watch app) that is already available on the App Store, watches running WatchOS6 will obviously no longer get updates. However, what is the experience for a user who has a WatchOS6 (maybe they own a Series 2) connected to an iPhone with iOS14? Will both the iPhone app and the Watch app stop getting updates? Will the Watch app stop getting updates, but the iPhone app continue receiving them and we have to manage this? Something else? Thanks in advance!

At the moment I am working on a small app that retrieves Activities via HealthKit and allows user to trim activities. A typical use case would be when an user forgets to finish / stop an activity recording on his watch. Has anyone experience with submit such kind of apps to the app store. Does apple even allow this kind of feature? It could harm the integrity of health data if not done correctly.

I'm student from Korea. I'm interested in apple things. I have several questions about Apple Watch sensors such as ECG(Electrocardiogram), Heart rate, Oxygen Saturation, breath rate, atrial fibrillation(afib) and so on. First of all, Can I use these sensors all day long? with no limit? I'm planning to develop some healthcare application using Apple Watch with sensors. I can't find examples of using sensors 24/7. And Second, If I can use the sensors all day long, can I execute the app in background? Finally, If I can execute the app in background, can I activate the sensors in background? Thank you for your help. I have tried searching developer guide, and searching the GitHub.

I am trying to get heart rate data from health store but when I make a query there are samples that come through with timestamps that shows that there are minutes that go by between the sample measurements. I remember watching an apple video where they were talking about the Quantity series and how these series have one kind of container for multiple data points of bpm data. I also see in the samples that there is a unit of " ___ counts per second" for each of the results so it would make sense if there were multiple datapoints within each of the results from the query but I don't know how to see what's inside of the results or if there is even anything more to them. This is the code I am using to retrieve the data: public func fetchLatestHeartRateSample(completion: @escaping (_ samples: [HKQuantitySample]?) -> Void) { /// Create sample type for the heart rate guard let sampleType = HKObjectType .quantityType(forIdentifier: .heartRate) else { completion(nil) return } /// Predicate for specifying start and end dates for the query let predicate = HKQuery .predicateForSamples( withStart: Date.distantPast, end: Date(), options: .strictEndDate) /// Set sorting by date. let sortDescriptor = NSSortDescriptor( key: HKSampleSortIdentifierStartDate, ascending: false) /// Create the query let query = HKSampleQuery( sampleType: sampleType, predicate: predicate, limit: Int(HKObjectQueryNoLimit), sortDescriptors: [sortDescriptor]) { ( _, results, error) in guard error == nil else { print("Error: \(error!.localizedDescription)") return } print(results ?? "Error printing results.") completion(results as? [HKQuantitySample]) } healthStore.execute(query) } Ultimately I want the most frequent heart rate data that is available. Ideally a bpm measurement every 5 - 10 seconds or less. Is this possible if I have not explicitly saved this heart rate data to the health store for a user before trying to access it or does Apple store all of this information in the health store regardless of the circumstances? Any help is greatly appreciated!

Where are Apple Watch fitness goals stored in HealthKit?

I am working with Apple HealthKit, and I need to add functionality to my app that allows a user's Apple Watch to automatically send the relevant data for their workout session (e.g. vo2 max, start timestamp, end timestamp, heartbeat, duration etc) as soon as they end their workout. This would need to work for any type of workout they do. E.g. if they are doing a running session, when they end their workout my app needs to receive the data for that running session almost instantly. I know that enableBackgroundDelivery allows my app to listen to changes in Apple Health in the background, but I'm not sure which method in HealthKit will allow me to implement the above use case. Does anyone have any pointers? I just want to know what methods in HealthKit will allow me to achieve this.

Hi, I'm the developer of Open Water Swim, and I have had multiple reports and have also confirmed with my own testing that the WatchOS 10 update has seriously degraded GPS data during open water swimming, both with the native Workout app and with Open Water Swim. The data provided by CoreLocation is no longer accurate or trustworthy. I will post several pictures showing before and after update swims: Here's the raw data (mapped) of a swim done with watchOS 9 on the Ultra. Same swim today: From another pair of users: These two went TOGETHER, one with watchOS 9 and one with watchOS 10. You can probably guess which is which. Watch OS 9 swim: SAME SWIM WITH A PARTNER ON WATCHOS 10 (beta here) And another, again, two people swimming together, one watchOS 9 and one watchOS 10. watchOS 9 Same swim, same time, watchOS 10 I have filed two feedback assistant reports with APPLE. One when it was still a beta issue: FB12587468. This one has zero response from apple. And now a second one filed with watchOS 10 release: FB13192409 Apple devs, I know you're here and listening, so please let's get this fixed ASAP. Thanks

Hey team! I have a question that feels very obvious, but I cannot seem to find the answer in the documentation. Using HealthKit/WorkoutKit, how you can make workouts with different activity types? Say you do 10 minutes of traditionalStrengthTraining followed by 10 minutes of running (common for crossfit and similar high intensity workout styles)? From the docs, it looks like you can’t change the activity type on an HKWorkout and the new dividing workouts into activities concept seems to only be for swimBikeRun workouts. Do you simply make multiple consecutive HKWorkoutSession instances, e.g doing startActivity -> beginCollection -> endCollection multiple times? Any input is highly appreciated!

I'm getting this errorBackgroundWorkoutSessionNotAllowed when calling session.prepare() on watchOS 10 Beta Simulator The apple's doc doesn't have any information about this error https://developer.apple.com/documentation/healthkit/hkerror/4291533-errorbackgroundworkoutsessionnot The code works perfectly on the device.

Dear developers, In case I want to start building healthcare marketplace app (pharmacies, medical equipments and labs) where every users can search for specific medicine, some Medical equipment and lab test can get a list of pharmacies, labs who provide those products/service. Having said that what could be the best sign in option for (pharmacists, labs, physicians, people/users) on phone number or E-mail or any sign in option that will fit who want to join healthcare app? I want your though guys here as I am trying to have a universal healthcare app that can connect all healthcare people/product/service with people. Thanks in advance for any advice

I have an iOS phone educational sports app. There is one small section where the user can track their stats. It is a very minor part of the app (perhaps 1% of the app content). It would be perfect for a watchOS app on its own. Can I create a separate standalone watch app even when the content is included in my phone app when it is a very insignificant part of the iPhone app?