The device UDID was registered to the developer account 40 hours ago, the STATUS column was "processing" in the first 24 hours, then turned to empty. But I still can't run my app (with distribution method "development"), when I try to run it after download it through my OTA URL, it prompts “the app cannot be installed because its integrity could not be verified” but everything runs good on a iPhone which was registered a month ago. What should I do now? keep waiting?

We were recently approved for the "User Assigned Device Name" for a specific app Identifier. The "Additional Capabilities" tab isn't present on that App ID. I am an admin in the developer portal, and this does not appear for the account holder as well. Any help would be appreciated.

We have a Mac that is used to sign and notarize our installers. This Mac will be going away soon, so I have to setup a new Mac to do that work. I've been able to install all the tools, but I can't get them to work. The certificates are in the keychain, but don't show up in the "My Certificates", probably because the related keys don't exist in the "Keys" list. I'm using the same Apple Dev ID that I used on the other machine. HOW do I get things setup on the new machine to work? There must be some way to get key/certificate pairs to work. (I am very definitely NOT a Mac expert, barely even a novice.)

I suddenly started to receive the following email with the error in it stating that my uploaded app is not available to be used in TestFlight: ITMS-90886: 'Cannot be used with TestFlight because the signature for the bundle at “MyApp.app/Contents/PlugIns/MyAppWidgetExtension.appex” is missing an application identifier but has an application identifier in the provisioning profile for the bundle. Bundles with application identifiers in the provisioning profile are expected to have the same identifier signed into the bundle in order to be eligible for TestFlight.' It was all working fine and now I am not sure even where to start looking. Signing, provisioning and everything else is managed automatically.

I regularly see folks run into problems with their Developer ID signing identities. Historically I pointed them to my posts on this thread, but I’ve decided to collect these ideas together in one place. If you have questions or comments, start a new thread here on DevForums and tag it with Developer ID so that I see it. IMPORTANT Nothing I write here on DevForums is considered official documentation. It’s just my personal ramblings based on hard-won experience. There is a bunch of official documentation that covers the topics I touch on here, including: Xcode documentation Xcode Help Developer Account Help Developer > Support > Certificates For a lot more information about code signing, see the Code Signing Resources pinned post. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" The Care and Feeding of Developer ID Most Apple signing assets are replaceable. For example, if you accidentally lose access to your Apple Development signing identity, it’s a minor inconvenience. Just use the Developer website to revoke your previous certificate and create a replacement. Or have Xcode do that for you. IMPORTANT If you don’t understand the difference between a certificate and a digital identity, and hence signing identity, read Certificate Signing Requests Explained before reading this post. Some signing assets are precious. Losing access to such assets has significant consequences. Foremost amongst those are Developer ID signing identities. These allow you to sign Mac products that ship independently. Anyone with access to your Developer ID signing identity can sign code as you. This has a number of consequences, both for you and for your relationship with Apple. Identify a Developer ID Signing Identity A Developer ID signing identity consists of two parts: the certificate and the private key. There are two different flavours, identifiable by the subject name in the certificate: Developer ID Application — This is named Developer ID Application: TTT, where TTT identifies your team. Use this to sign code and disk images. Developer ID Installer — This is named Developer ID Installer: TTT, where TTT identifies your team. Use this to sign installer packages. Note If you do KEXT development, there’s a third flavour, namely a KEXT-enabled Developer ID Application signing identity. For more details, see KEXT Code Signing Problems. This post focuses on traditional signing identities, where you manage the private key. Xcode Cloud introduced cloud signing, where signing identities are “stored securely in the cloud”. These identities have the Managed suffix in Certificates, Identifiers, and Profiles. For example, Developer ID Application Managed is the cloud signing equivalent of Developer ID Application. To learn more about cloud signing, watch WWDC 2021 Session 10204 Distribute apps in Xcode with cloud signing. To identify these certificates ‘in the wild’, see Identifying a Cloud Managed Signing Certificate. Limit Access to Developer ID Anyone with your Developer ID signing identity can sign code as you. Given that, be careful to limit access to these signing identities. This is true both for large organisations and small developers. In a large organisation, ensure that only folks authorised to ship code on behalf of your organisation have access to your Developer ID signing identities. Most organisations have some sort of release process that they use to build, test, and authorise a release. This often involves a continuous integration (CI) system. Restrict CI access to only those folks involved in the release process. Even if you’re a small developer with no formal release process, you can still take steps to restrict access to Developer ID signing identities. See Don’t Leak Your Private Key, below. In all cases, don’t use your Developer ID signing identities for day-to-day development. That’s what Apple Development signing identities are for. Create Developer ID Signing Identities as the Account Holder Because Developer ID signing identities are precious, the Developer website will only let the Account Holder create them. For instructions on how to do this, see Developer Account Help > Create certificates > Create Developer ID certificates. For more information about programme roles, see Developer > Support > Program Roles. IMPORTANT In an Organization team it’s common for the Account Holder to be non-technical. They may need help getting this done. For hints and tips on how to avoid problems while doing this, see Don’t Lose Your Private Key and Don’t Leak Your Private Key, both below. Limit the Number of Developer ID Signing Identities You Create Don’t create Developer ID signing identities unnecessarily. Most folks only need to create one. Well, one Developer ID Application and maybe one Developer ID Installer. A large organisation might need more, perhaps one for each sub-unit, but that’s it. There are two reasons why this is important: The more you have, the more likely it is for one to get into the wrong hands. Remember that anyone with your Developer ID signing identity can sign code as you. The Developer website limits you to 5 Developer ID certificates. Note I can never remember where this limit is actually documented, so here’s the exact quote from this page: You can create up to five Developer ID Application certificates and up to five Developer ID Installer certificates using either your developer account or Xcode. Don’t Lose Your Private Key There are two standard processes for creating a Developer ID signing identity: Developer website — See Developer Account Help > Create certificates > Create Developer ID certificates. Xcode — See Xcode Help > Maintaining signing assets > Manage signing certificates. Both processes implicitly create a private key in your login keychain. This makes it easy to lose your private key. For example: If you do this on one Mac and then get a new Mac, you might forget to move the private key to the new Mac. If you’re helping your Organization team’s Account Holder to create a Developer ID signing identity, you might forget to export the private key from their login keychain. It also makes it easy to accidentally leave a copy of the private key on a machine that doesn’t need it; see Don’t Leak Your Private Key, below, for specific advice on that front. Every time you create a Developer ID signing identity, it’s a good idea to make an independent backup of it. For advice on how to do that, see Back Up Your Signing Identities, below. That technique is also useful if you need to copy the signing identity to a continuous integration system. If you think you’ve lost the private key for a Developer ID signing identity, do a proper search for it. Finding it will save you a bunch of grief. You might be able to find it on your old Mac, in a backup, in a backup for your old Mac, and so on. For instructions on how to extract your private key from a general backup, see Recover a Signing Identity from a Mac Backup. If you’re absolutely sure that you previous private key is lost, use the Developer website to create a replacement signing identity. If the Developer website won’t let you create any more because you’ve hit the limit discussed above, talk to Developer Programs Support. Go to Apple > Developer > Contact Us and follow the path Development and Technical > Certificates, Identifiers, and Provisioning Profiles. Don’t Leak Your Private Key Anyone with your Developer ID signing identity can sign code as you. Thus, it’s important to take steps to prevent its private key from leaking. A critical first step is to limit access to your Developer ID signing identities. For advice on that front, see Limit Access to Developer ID, above. In an Organization team, only the Account Holder can create Developer ID signing identities. When they do this, a copy of the identity’s private key will most likely end up in their login keychain. Once you’ve exported the signing identity, and confirmed that everything is working, make sure to delete that copy of the private key. Some organisations have specific rules for managing Developer ID signing identities. For example, an organisation might require that the private key be stored in a hardware token, which prevents it from being exported. Setting that up is a bit tricky, but it offers important security benefits. Even without a hardware token, there are steps you can take to protect your Developer ID signing identity. For example, you might put it in a separate keychain, one with a different password and locking policy than your login keychain. That way signing code for distribution will prompt you to unlock the keychain, which reminds you that this is a significant event and ensures that you don’t do it accidentally. If you believe that your private key has been compromised, follow the instructions in the Compromised Certificates section of Developer > Support > Certificates. IMPORTANT Don’t go down this path if you’ve simply lost your private key. Back Up Your Signing Identities Given that Developer ID signing identities are precious, consider making an independent backup of them. To back up a signing identity to a PKCS#12 (.p12) file: Launch Keychain Access. At the top, select My Certificates. On the left, select the keychain you use for signing identities. For most folks this is the login keychain. Select the identity. Choose File > Export Items. In the file dialog, select Personal Information Exchange (.p12) in the File Format popup. Enter a name, navigate to your preferred location, and click Save. You might be prompted to enter the keychain password. If so, do that and click OK. You will be prompted to enter a password to protect the identity. Use a strong password and save this securely in a password manager, corporate password store, on a piece of paper in a safe, or whatever. You might be prompted to enter the keychain password again. If so, do that and click Allow. The end result is a .p12 file holding your signing identity. Save that file in a secure location, and make sure that you have a way to connect it to the password you saved in step 9. Remember to backup all your Developer ID signing identities, including the Developer ID Installer one if you created it. To restore a signing identity from a backup: Launch Keychain Access. Choose File > Import Items. In the open sheet, click Show Options. Use the Destination Keychain popup to select the target keychain. Navigate to and select the .p12 file, and then click Open. Enter the .p12 file’s password and click OK. If prompted, enter the destination keychain password and click OK. Recover a Signing Identity from a Mac Backup If you didn’t independently backup your Developer ID signing identity, you may still be able to recover it from a general backup of your Mac. To start, work out roughly when you created your Developer ID signing identity: Download your Developer ID certificate from the Developer website. In the Finder, Quick Look it. The Not Valid Before field is the date you’re looking for. Now it’s time to look in your backups. The exact details depend on the backup software you’re using, but the basic process runs something like this: Look for a backup taken shortly after the date you determined above. In that backup, look for the file ~/Library/Keychains/login.keychain. Recover that to a convenient location, like your desktop. Don’t put it in ~/Library/Keychains because that’ll just confuse things. Rename it to something unique, like login-YYYY-MM-DD.keychain, where YYYY-MM-DD is the date of the backup. In Keychain Access, choose File > Add Keychain and, in the resulting standard file panel, choose that .keychain file. On the left, select login-YYYY-MM-DD. Chose File > Unlock Keychain “login-YYYY-MM-DD“. In the resulting password dialog, enter your login password at the date of the backup. At the top, select My Certificates. Look through the list of digital identities to find the Developer ID identity you want. If you don’t see the one you’re looking for, see Further Recovery Tips below. Export it using the process described at the start of Back Up Your Signing Identities. Once you’re done, remove the keychain from Keychain Access: On the left, select the login-YYYY-MM-DD keychain. Choose File > Delete Keychain “login-YYYY-MM-DD”. In the confirmation alert, click Remove Reference. The login-YYYY-MM-DD.keychain is now just a file. You can trash it, keep it, whatever, at your discretion. This process creates a .p12 file. To work with that, import it into your keychain using the process described at the end of Back Up Your Signing Identities. IMPORTANT Keep that .p12 file as your own independent backup of your signing identity. Further Recovery Tips If, in the previous section, you can’t find the Developer ID identity you want, there are a few things you might do: Look in a different backup. If your account has more than one keychain, look in your other keychains. If you have more than one login account, look at the keychains for your other accounts. If you have more than one Mac, look at the backups for your other Macs. The login-YYYY-MM-DD keychain might have the private key but not the certificate. Add your Developer ID certificate to that keychain to see if it pairs with a private key. Revision History 2025-03-28 Excised the discussion of Xcode’s import and export feature because that was removed in Xcode 16. 2025-02-20 Added some clarification to the end of Don’t Leak Your Private Key. 2023-10-05 Added the Recover a Signing Identity from a Mac Backup and Further Recovery Tips sections. 2023-06-23 Added a link to Identifying a Cloud Managed Signing Certificate. 2023-06-21 First posted.

Notarization step fails: New AppID and password created: xcrun notarytool submit “.dmg” --apple-id “” --team-id “” --password “” --verbose --wait Error: HTTP status code: 401. Your Apple ID has been locked. Visit iForgot to reset your account (https://iforgot.apple.com), then generate a new app-specific password. Ensure that all authentication arguments are correct. I have reset app password many times, not result. Codesigning completes normally: Mac OS 11.5.2 Xcode 13.2.1

Hello everyone, I'm encountering an issue while trying to publish an app on TestFlight. The app in question is Home Assistant, which I've compiled from the source. I am able to compile and install the app on my device without any problems. My company's developer account is properly configured, and I have set Xcode to automatically manage the provisioning profile. The archive is also created successfully, but when I attempt to upload it to Apple Store Connect for testing via TestFlight, I receive the following error: ERROR: [ContentDelivery.Uploader] Asset validation failed (90525) Missing Entitlement. The bundle 'Home Assistant.app/PlugIns/HomeAssistant-Extensions-PushProvider.appex' is missing entitlement 'com.apple.developer.networking.networkextension'. (ID: ceac6dcc-9c76-412e-8ea7-f2d2845f8013) I've made several attempts to resolve this issue to no avail. For instance, if I add the missing capability manually, then I am informed that the provisioning profile is incorrect. However, checking the network extension settings on my company's dev account, I see nothing related to push notifications, which are located elsewhere. Thus, I am stuck in a loop where either the provisioning file is correct but the entitlement is missing, or if the entitlement is present, then the provisioning profile is deemed incorrect. URL:https://contentdelivery.itunes.apple.com status code: 409 (conflict) httpBody: { "errors" : [ { "id" : "ceac6dcc-9c76-412e-8ea7-f2d2845f8013", "status" : "409", "code" : "STATE_ERROR.VALIDATION_ERROR.90525", "title" : "Asset validation failed", "detail" : "Missing Entitlement. The bundle 'Home Assistant.app/PlugIns/HomeAssistant-Extensions-PushProvider.appex' is missing entitlement 'com.apple.developer.networking.networkextension'." }, { "id" : "9ff2143b-3c00-4912-b59f-8342fa6fe5c0", "status" : "409", "code" : "STATE_ERROR.VALIDATION_ERROR.90525", "title" : "Asset validation failed", "detail" : "Missing Entitlement. The bundle 'Home Assistant.app' is missing entitlement 'com.apple.developer.networking.networkextension'." } ] } ======================================= 2024-01-10 23:19:35.506 ERROR: [ContentDelivery.Uploader] Asset validation failed (90525) Missing Entitlement. The bundle 'Home Assistant.app/PlugIns/HomeAssistant-Extensions-PushProvider.appex' is missing entitlement 'com.apple.developer.networking.networkextension'. (ID: ceac6dcc-9c76-412e-8ea7-f2d2845f8013) 2024-01-10 23:19:35.506 DEBUG: [ContentDelivery.Uploader] Error Domain=ContentDelivery Code=90525 "Asset validation failed" UserInfo={NSLocalizedFailureReason=Missing Entitlement. The bundle 'Home Assistant.app/PlugIns/HomeAssistant-Extensions-PushProvider.appex' is missing entitlement 'com.apple.developer.networking.networkextension'. (ID: ceac6dcc-9c76-412e-8ea7-f2d2845f8013), NSUnderlyingError=0x6000022b6430 {Error Domain=IrisAPI Code=-19241 "Asset validation failed" UserInfo={status=409, detail=Missing Entitlement. The bundle 'Home Assistant.app/PlugIns/HomeAssistant-Extensions-PushProvider.appex' is missing entitlement 'com.apple.developer.networking.networkextension'., id=ceac6dcc-9c76-412e-8ea7-f2d2845f8013, code=STATE_ERROR.VALIDATION_ERROR.90525, title=Asset validation failed, NSLocalizedFailureReason=Missing Entitlement. The bundle 'Home Assistant.app/PlugIns/HomeAssistant-Extensions-PushProvider.appex' is missing entitlement 'com.apple.developer.networking.networkextension'., NSLocalizedDescription=Asset validation failed}}, iris-code=STATE_ERROR.VALIDATION_ERROR.90525, NSLocalizedDescription=Asset validation failed} 2024-01-10 23:19:35.507 ERROR: [ContentDelivery.Uploader] Asset validation failed (90525) Missing Entitlement. The bundle 'Home Assistant.app' is missing entitlement 'com.apple.developer.networking.networkextension'. (ID: 9ff2143b-3c00-4912-b59f-8342fa6fe5c0) 2024-01-10 23:19:35.507 DEBUG: [ContentDelivery.Uploader] Error Domain=ContentDelivery Code=90525 "Asset validation failed" UserInfo={NSLocalizedFailureReason=Missing Entitlement. The bundle 'Home Assistant.app' is missing entitlement 'com.apple.developer.networking.networkextension'. (ID: 9ff2143b-3c00-4912-b59f-8342fa6fe5c0), NSUnderlyingError=0x6000022b6640 {Error Domain=IrisAPI Code=-19241 "Asset validation failed" UserInfo={status=409, detail=Missing Entitlement. The bundle 'Home Assistant.app' is missing entitlement 'com.apple.developer.networking.networkextension'., id=9ff2143b-3c00-4912-b59f-8342fa6fe5c0, code=STATE_ERROR.VALIDATION_ERROR.90525, title=Asset validation failed, NSLocalizedFailureReason=Missing Entitlement. The bundle 'Home Assistant.app' is missing entitlement 'com.apple.developer.networking.networkextension'., NSLocalizedDescription=Asset validation failed}}, iris-code=STATE_ERROR.VALIDATION_ERROR.90525, NSLocalizedDescription=Asset validation failed} 2024-01-10 23:19:35.507 DEBUG: [ContentDelivery.Uploader] swinfo errors: ( "Error Domain=ContentDelivery Code=90525 \"Asset validation failed\" UserInfo={NSLocalizedFailureReason=Missing Entitlement. The bundle 'Home Assistant.app/PlugIns/HomeAssistant-Extensions-PushProvider.appex' is missing entitlement 'com.apple.developer.networking.networkextension'. (ID: ceac6dcc-9c76-412e-8ea7-f2d2845f8013), NSUnderlyingError=0x6000022b6430 {Error Domain=IrisAPI Code=-19241 \"Asset validation failed\" UserInfo={status=409, detail=Missing Entitlement. The bundle 'Home Assistant.app/PlugIns/HomeAssistant-Extensions-PushProvider.appex' is missing entitlement 'com.apple.developer.networking.networkextension'., id=ceac6dcc-9c76-412e-8ea7-f2d2845f8013, code=STATE_ERROR.VALIDATION_ERROR.90525, title=Asset validation failed, NSLocalizedFailureReason=Missing Entitlement. The bundle 'Home Assistant.app/PlugIns/HomeAssistant-Extensions-PushProvider.appex' is missing entitlement 'com.apple.developer.networking.networkextension'., NSLocalizedDescription=Asset validation failed}}, iris-code=STATE_ERROR.VALIDATION_ERROR.90525, NSLocalizedDescription=Asset validation failed}", "Error Domain=ContentDelivery Code=90525 \"Asset validation failed\" UserInfo={NSLocalizedFailureReason=Missing Entitlement. The bundle 'Home Assistant.app' is missing entitlement 'com.apple.developer.networking.networkextension'. (ID: 9ff2143b-3c00-4912-b59f-8342fa6fe5c0), NSUnderlyingError=0x6000022b6640 {Error Domain=IrisAPI Code=-19241 \"Asset validation failed\" UserInfo={status=409, detail=Missing Entitlement. The bundle 'Home Assistant.app' is missing entitlement 'com.apple.developer.networking.networkextension'., id=9ff2143b-3c00-4912-b59f-8342fa6fe5c0, code=STATE_ERROR.VALIDATION_ERROR.90525, title=Asset validation failed, NSLocalizedFailureReason=Missing Entitlement. The bundle 'Home Assistant.app' is missing entitlement 'com.apple.developer.networking.networkextension'., NSLocalizedDescription=Asset validation failed}}, iris-code=STATE_ERROR.VALIDATION_ERROR.90525, NSLocalizedDescription=Asset validation failed}" )

I'm currently befuddled by the entire signing and certificate process. I don't understand what I need, what the team admin needs to do, or how to go about doing it so that I can build the project. We've managed to have this working in the past but I guess the system has changed somewhat. Here's what we have going: A Unity project which hasn't changed from a few years ago. I build the project in unity, open the Xcode project and this: There's an issue with the Signing and Capabilities. If I choose automatic setup it shows an error saying that it requires a development team. I had the account admin add my Apple ID to the team so I'm not sure why that's an issue still. Do I need to pay the 99$ to be able to building Xcode? If I try to do it manually I select the provisioning profile that the account admin sent me and it auto selects the team associated with the provisioning profile I guess but then there's no singing certificate. The error says: There is no signing certificate "iOS Development" found. No "iOS Development" signing certificate matching team ID "V7D5YBZRMV" with a private key was found. So, if someone could explain to me like I'm 5 the entire signing and certificate process is and let me know what we're doing wrong with the team/provisioning profile/certificate setup I would be very much appreciative.

I've added my Vendor ID to the appropriate entitlement files but my binary fails validation when trying to upload it to the store for distribution. The embeded.mobileprovision file in the generated archive shows an asterisk instead of my approved Vendor ID. How can I make sure the embedded provisioning file has my Vendor ID?

I have a bizzare issue with my Apple TV that is shown as "iPod" in Apple developer portal. It's correctly visible in Xcode as Apple TV, but when I add it to developer portal it says "iPod". The problem is since it's there as an iPod I can't use it to my provisioning profile to build on the device Anyone has any idea how this can be solved? [Edited by Moderator]

I am trying out the new xcode 16, and am trying to sign some existing apps. I have a .developerprofile from xcode 15. But I cannot find a way to import it (I think I need the private certs, in order to sign an app). There is no "import" button at the bottom of the Accounts tab, within the xcode Accounts Settings.... Is there any other way (e.g: Terminal) to import an existing .developerprofile into xcode? Or am I missing something?

Hello, For my macOS app, on Xcode version 15.4 (15F31d) on macOS 14.5 (23F79) I follow Organizer > Distribute App > Direct Distribution, and I get a Notary Error "The operation couldn't be completed. (SotoS3.S3ErrorType.multipart error 1.)" It's been happening since 3 days. In the IDEDistribution.verbose.log file I see: https://gist.github.com/atacan/5dec7a5e26dde0ec06a5bc4eb3607461

I was granted permissions for family controls distribution for the main target of my app. Do I also need to request permission for the other targets like ShieldConfiguration, ShieldActionExtension, etc.? If no, how can i add the distribution capabilities to those targets?

Hello, We use automatic signing and Fastlane on our CI. Fastlane uses xcodebuild to create an archive. xcodebuild -workspace ourApp.xcworkspace -scheme app-dev -destination generic/platform=iOS -archivePath app-dev.xcarchive -skipPackagePluginValidation -allowProvisioningUpdates -authenticationKeyID OurAppStoreConnectAuthKey -authenticationKeyIssuerID OurAppStoreConnectAuthKeyIssuerId -authenticationKeyPath /path/to/OurAppStoreConnectKey.p8 clean archive All works fine, but .... Why does Xcode 16 log out logged Apple ID and create a new every build? As a result, we have more and more Unknown Apple IDs in Xcode, and for each of them an error appears in log. Error: xcodebuild[3174:1804334] DVTDeveloperAccountManager: Failed to load credentials for 0A1DF15C-ETC-ETC: Error Domain=DVTDeveloperAccountCredentialsError Code=0 "Invalid credentials in keychain for 0A1DF15C-ETC-ETC, missing Xcode-Username" UserInfo={NSLocalizedDescription=Invalid credentials in keychain for 0A1DF15C-ETC-ETC, missing Xcode-Username} Of course, the originally logged-in Apple ID has an error corresponding to his non-logged-in state. xcodebuild[3174:1804334] DVTDeveloperAccountManager: Failed to load credentials for originally_logged-in_user: Error Domain=DVTDeveloperAccountCredentialsError Code=0 "Invalid credentials in keychain for originally_logged-in_user, missing Xcode-Token" UserInfo={NSLocalizedDescription=Invalid credentials in keychain for originally_logged-in_user, missing Xcode-Token} Why does this happen and how can it be fixed? Why does Xcode 16 log out its logged Apple ID?

I have a DriverKit system extension (dext) that uses PCIDriverKit. I would like to get the build environment straightened out to successfully distribute the dext and associated software to end users. There are three types of software involved: The Dext-hosting application - this is the application that must be installed to /Applications/, and will perform the registration of the dext. The dext is deployed "within" this application, and can be found in the /Contents/Library/SystemExtensions folder of the app bundle. The dext itself - this is the actual binary system extension, which will be registered by its owning application, and will operate in its own application space independent of the hosting application. Additional applications that communicate with the dext - these are applications which will connect to the dext through user clients, but these applications do not contain the dext themselves. There are multiple locations where settings need to be exactly correct for each type of software to be signed, provisioned, and notarized properly in order to be distributed to users: developer.apple.com - where "identifiers" and "provisioning profiles" are managed. Note that there are differences in access between "Team Agent", "Admin", and "Developer" at this site. Xcode project's Target "Signing & Capabilities" tab - this is where "automatically manage signing" can be selected, as well as team selection, provisioning profile selection, and capabilities can be modified. Xcode project's Target "Build Settings" tab - this is where code signing identity, code signing development team, code signing entitlements file selection, Info.plist options and file selection, and provisioning profile selection. Xcode's Organizer window, which is where you manage archives and select for distribution. In this case, I am interested in "Developer ID" Direct Distribution - I want the software signed with our company's credentials (Team Developer ID) so that users know they can trust the software. Choosing "automatically manage signing" does not work for deployment. The debug versions of software include DriverKit (development) capability (under App ID configuration at developer.apple.com), and this apparently must not be present in distributable provisioning. I believe this means that different provisioning needs to occur between debug and release builds? I have tried many iterations of selections at all the locations, for all three types of binaries, and rather than post everything that does not work, I am asking, "what is supposed to work?"

Hi, after 2 years of not updating my app on appstore i wanted to submit an update for my iOS app which also containts a watch app target. When i try to submit it to upload it i get the following errors: Failed registering bundle identifier The app identifier "(myappBundleID).watchkitapp" cannot be registered to your development team because it is nit available. Change your bundle identifier to a unique string to try again. No Profiles for "(myappBundleID).watchkitapp" were found. Xcode culdn't find any iOS App Store provisining profiles matching "(myappBundleID).watchkitapp" Since i have my app already in store with that bundle identifier i don't know why it can not be registered to my team. Also i don't want to change the bundle identifier because then i can not publish it as update to store.

Is it correct to codesign dylib/framewoks with entitlements? My understanding is that only executables need to have the entitlement and the dylibs loaded in that process will automatically inherit those entitlements. However, I am seeing a lot of scripts on the internet that are signing dylibs as well with entitlements. For eg - # sign *.dylibs find "$APP_BUNDLE" -type f -name "*.dylib" -exec codesign --deep --force --verify --verbose --timestamp --options runtime --entitlements "$ENTITLEMENTS_FILE" --sign "$SIGNING_IDENTITY" {} \; Is this even allowed? I know of at least one app that has passed notarization checks as well. If allowed, can a dylib have more entitlements than the process that loaded it?

I'm working on a system extension leveraging endpoint security entitlement. However, while in development, is there a way to continue working and testing locally without having the endpoint security entitlement approved or needing the extension signed. I got these errors running a build: Provisioning profile "Mac Team Provisioning Profile: "com.xxxxx.extension" doesn't include the com.apple.developer.endpoint-security.client entitlement.

Keys can vary; an account is not necessary, as only Team Keys are suitable for notarization. It seems that Developer role is sufficient for notarization. We have tried both keys and roles of Developer and Account Manager - the behavior is the same. Multiline There are two types of API keys: Team Access to all apps, with varying levels of access based on selected roles. Individual Access and roles of the associated user. Individual kevs aren't able to use Provisioning endpoints, access Sales and Finance, or notaryTool. BlockQuote Here are the parameters used for notarization via API key: `-k, --key key-path    App Store Connect API key. File system path to the private key. -d, --key-id key-id    App Store Connect API Key ID. For most teams this will be a 10 character alphanumeric string. -i, --issuer issuer    App Store Connect API Issuer ID. The issuer ID is a UUID format string.` The notarization result shows as successful, and on the same machine, the package appears as notarized. However, when the package is transferred to another system, it is displayed as not notarized.

Hello! I've been facing an issue with notarizing a macOS app with an Enterprise API Key. Due to some misunderstanding setting up the project some years ago, the notarization step was using a developer's accounts API Key. I am looking to fix it to have everything centralized in the Enterprise account we work with, but I get "Debug [JWT] Generating new JWT for key ID" with the new key. This is using the xcrun notarytool directly to get more input. Using Fastlane it fails as: Error polling for notarization info: [11:29:25]: unexpected token at '' The project is deployed via MDM, so we need it to prevent the security warning. I used this documentation to create the key: https://developer.apple.com/documentation/enterpriseprogramapi/creating-api-keys-for-enterprise-program-api I have tried a Developer and an Admin access key, and the Account Holder has also created an Admin key but the errors keep the same. I just updated my Fastlane script to use the new key with the updated values. The old developer account key still works. I am not sure if I am missing any steps in the documentation or if this is not achievable. Important to add that all the profiles and certificates were already set up properly in the Enterprise account, the only error was using an App Store Connect Key instead of an Enterprise Key. Thanks in advance for the help.