Hello, I am facing a problem when trying to start the Wallet Extension Flow. It seems that even though the override func status(completion: @escaping (PKIssuerProvisioningExtensionStatus) -> Void) of the PKIssuerProvisioningExtensionHandler is called, the override func passEntries(completion: @escaping ([PKIssuerProvisioningExtensionPassEntry]) -> Void) is not called. Note that this issue is reproduced in a device with iOS 18.1 whereas it is working correctly in a device with iOS 17.4. Has something changed regarding the Wallet Extension in iOS 18.1 and above?

The Shortcuts app offers the possibility to trigger shortcuts/intends when a wallet credit card is used and a new transaction is created. I would like to add transaction details to one of my apps and use such a shortcut for it. Other apps do the exact same thing, so this should not be a problem. Adding a shortcut to my app was not a big deal. However, how can this be tested on simulator? When trying to add a new automatization in the Shortcuts app using a wallet transaction as trigger I cannot finish the setup dialog since the Next button is disabled. I assume this is because no card is configured. When trying to add a card in Wallet I just receive that this was not successful. I have connected the simulator to a Sandbox Apple ID account using a region which supports Apple Pay (US). Using a real account does not solve the problem. Any idea how to get this working? Using real transaction within a store could obviously not be the solution for debugging.

So this is a long shot. My apple device has been hacked. In March, my credit card, which is in apple pay, started to get used, until May. It was used for thousands of dollars. In July i discovered installed and generally “invisible” files in the files app. I’ve called All IPhone that was a contact file. when i started deleting everything from my phone, all messages and photos and accounts, it became obvious i was signed into the app store in a sandbox account i never signed up for or into. I believe this is one method by device as compromised through apple. does anyone have any ideas on if it would be possible for a hacker to use my apple pay through some scam developer who had initiated a testing agreement between myself and them?

I can’t send or receive money with Apple Cash My account is restricted but only Apple Cash everything else works fine help

Hello, we re developing a loyalty platform for end users and as such emit Apple wallet store cards. Problem we're facing is that the HTTP POST /v1/devices/:deviceLibraryIdentifier/registrations/:passTypeIdentifier/:serialNumber in some cases doesn't come through and we have no idea why. This only happens to a small percentage of customers, others work just fine. Does anyone have an idea why this might happen? I believe our setup is correct when 90% of customers work and we receive these HTTP requests to our server.

Hello, We are integrating Apple Wallet functionality using the Thales SDK. While we’ve successfully implemented In-App provisioning, we are encountering an issue with the Wallet Extension. I followed the documentation provided here to implement the Apple Wallet Extension: https://developer.dbp.thalescloud.io/docs/d1-developer-portal/ab10ea4059dx1-apple-wallet-extension I’ve implemented everything as per the guide, but I’m still unable to see my app logo in the Wallet Extension under "From Apps on Your iPhone." Could anyone help identify what might be missing or point me in the right direction to resolve this issue. Thanks!

I'm implementing Apple wallet extension in an iOS app. Currently following this documentation https://developer.apple.com/documentation/passkit/implementing-wallet-extensions I'm facing challages while testing the extension. Any suggestion how can i test it during developmet. Like if i want to test the storyboard from Wallet UI extension. Any suggestions or helping material would be appriciated.

Hi, for iOS in-app push provisioning flow, and for a card that is in already in requiresActivation state, is it possible from our app UI to launch to the card's verification screen either as a in-app flow (like how in-app push provisioning flow is doing) or Apple Wallet? So far the current process is that it will prompt user to provision the card again (only to show This Card is Already in Wallet error), or to open the card in tap-to-pay mode, or adding a new card flow in Apple Wallet. Am I missing any PassKit SDK on this?

When attempting to make a payment via Apple Pay in the card payment form, an error occurs, but there is no information about the error. Here, you can watch a video with detailed information about what happened: https://drive.google.com/drive/folders/1bco64RH3UPcJTqjW6muIRDr1gW7lnJ6d?usp=sharing

We are implementing Apple Pay and Wallet features in our app and using mocked data for testing purposes. Specifically, in the status(completion:) method of PKIssuerProvisioningExtensionHandler, we return: passEntriesAvailable: true, remotePassEntriesAvailable: true, requiresAuthentication: true, In the passEntries(completion:) method, we provide mocked data for our card. The issue is that the app icon inconsistently appears under the "From Apps on Your iPhone" section in the Wallet app. Sometimes it shows up as expected, but other times it does not. On recent occasions, when the app is selected and mocked authorization is paased, the behavior includes a system error 'Cannot Add Card' even though we provided status that indicates that the app has available cards for Wallet. For reference: The app uses two bundle IDs supporting in-app provisioning and PNO Pass Metadata has not been configured yet. Could you help clarify the potential reasons for this inconsistent behavior?

Earlier this year implemented saving event tickets to Apple Wallet (and Google Wallet, which was painful by comparison!), as an optional alternative to recipients leaving the QR Codes in email or printing them. Scanning barcodes on entry is done using camera on phones (either iPhone or Android). This is a somewhat pressured situation with lots of people needing scans in quite a short period of time. I do not do this myself but I do get feedback. it was reported to me that Apple Wallet barcodes are significantly harder to scan accurately than those in Google Wallet. They think that is because the Apple QR Codes are quite a bit smaller (and presumably harder, therefore, to get focussed properly). They do work, it just takes longer to get a successful scan. This doesn’t seem to be anything I can control, and there seems to be plenty of space to make them bigger, even on my iPhone mini. These aren’t terribly dense barcodes; I imagine they would be harder still if they were. I also guess specialised barcode readers might do better, but we don’t have that luxury. I’d appreciate it if they could be bigger when displayed in Apple Wallet, or at least to have that as an option.

We are developing an Add To Wallet flow on our website where we add the "Add To Wallet" button to a user portal for them to be able to add a loyalty card pass to their Apple Wallet. In other projects with Apple Pay, we can check whether or not the browser supports the JS library by checking if it exists on the global window property (if (window.ApplePaySession) { //do stuff } Is there an equivalent to determine if the user's device is capable of accepting a Wallet pass?

Hello, I'm using Apple Wallet passes with a custom backend for distributing and updating them, as described in the documentation (https://developer.apple.com/documentation/walletpasses). I'm sometimes seeing a behaviour where the device does not download an updated pass even though the push notification for informing about the changes has been successfully sent (I've received a success response from APNs). APNs documentation says that it should retry sending the notification if the device is not reachable, but in the cases I'm describing here, the request from the device to fetch the updated pass never arrives. I don't have the apns-expiration header set. Also, I've checked the load balancer and firewall logs, etc. and there are no traces of the requests. Any thoughts on what might be the issue here? Or how to debug this further?

Hi, We are using Apple VAS and ECP2 certified NFC readers. What process will we need to follow to issue NFC-based keys so that we can provide an access control use case? Any help in this regard will be much appreciated. Thanks, Aweliv

Hi everyone, I am working on creating an NFC-enabled Apple Wallet pass but have been unable to get the NFC functionality to work. While the pass itself adds to Wallet without issues, the NFC feature does not activate. Here’s a summary of what I’ve done: 1. Developer Setup: Registered a Pass Type ID in my Apple Developer account. Generated and installed the Pass Type ID certificate. Installed the latest WWDR certificate. 2. Pass JSON Configuration: My pass.json file includes the following NFC configuration: "nfc": { "message": "Tap to unlock door", "encryptionPublicKey": "MY_ENCRYPTION_PUBLIC_KEY", "payload": "encrypted_nfc_payload" } 3. Testing Results: When the pass includes the nfc field, it adds to Wallet but NFC does not work. If I remove the nfc field, the pass works fine (minus NFC, of course). What I Need Help With: 1. A step-by-step guide for correctly implementing NFC in Wallet passes, including details about encryption, key generation, and any additional setup steps. 2. Information on whether there are specific device or iOS version requirements for NFC-enabled passes. If there are any prerequisites or specific configurations I might be missing, please let me know. I’d really appreciate detailed guidance or resources that could help resolve this issue. Thank you!

I've implemented Push Provisioning, but am having trouble testing it. When I try to add a payment pass with my activationData, encryptedPassData, and ephemeralPublicKey, I see the "Add Card to Apple Pay" screen, but then when I click "Add Card", I get a "Could Not Add Card" message. When I inspect the error from didFinishAddingPaymentPass, it reads "The operation couldn’t be completed. (PKPassKitErrorDomain error 2.)". Is this error PKPassKitError.Code.unsupportedVersionError? What does this error means? Additional context: We use cordova-apple-wallet to generate certificates and add payment pass.

Hi, I am trying to upload the Certificate Signing Request but its failing and showing this error: CSR algorithm/size incorrect. Expected: RSA(2048)

With the relevantDate field deprecated for Apple passes as of 18.1 https://developer.apple.com/documentation/passkit_apple_pay_and_wallet/pkpass/1618776-relevantdate, boarding pass notifications on the lock screen no longer seem to display the departure time. Is there a way to show this again? Would semantic tags (Semantics.currentDepartureDate) or the new PkPass.releaseDates field help?

We've had reports that since upgrading to iOS 18.1.1, wallet pass notifications (on the lock screen) now display "Nearby" instead of the Departure time,. Has anyone else experienced this issue? There doesn't seem to be any documentation around it. Thanks

I'm encountering an issue with the Apple Pass Store card type backfield hyperlink not working when opened from double-clicking the power button. The value contains an HTML tag with a reference to our webpage. Everything works fine when we open it from the Wallet app, but the hyperlink doesn't seem to work when opened from the power button double-click. Has anyone else experienced this issue or have any suggestions for troubleshooting? Any help would be greatly appreciated. Thank you!