我在Core Bluetooth中发现了连接数量相关的错误码：CBError.Code.connectionLimitReached。 但是并没有找到最大连接数量相关的定义。请问在哪里可以找到最大连接数量相关的定义？

I’m encountering an unexpected issue while using NEHotspotConfigurationManager.shared.apply(...) to connect to a Wi-Fi network. Specifically, I’m receiving a userDenied error, even though the user did not interact with any system prompt. Here’s a version of the code I’m using: let config = NEHotspotConfiguration(ssid: ssid, passphrase: passphrase, isWEP: false) // config.joinOnce = true NEHotspotConfigurationManager.shared.apply(config) { error in if let err = error { let nsErr = err as NSError mlog("err.code:\(nsErr.code)") if nsErr.code == NEHotspotConfigurationError.alreadyAssociated.rawValue { self.findWiFiListAndConnect(ssid, passphrase, overtimeSec, timeStart) } else { self.cmdDelegateQueue.async { self.delegate?.wifiClose(nsErr.code) } } } } The error returned is: wifiClose status: 7 Which corresponds to NEHotspotConfigurationError.userDenied. According to the official Apple documentation, this error should only occur when the user explicitly cancels the system dialog. However, in my case: • No system dialog appears. • The user does nothing, yet the error is still returned. • This issue does not happen every time, but it has been observed across multiple devices. Additional info: • iOS version: 18.5 • Device model: iPhone • joinOnce is not set (defaults to false) • Existing configuration is removed using removeConfiguration(...) before applying Is it possible that under certain system states (e.g. backgrounded, network restrictions, or app permissions), iOS silently fails without showing the prompt? Has anyone else encountered this issue, or does anyone know what could cause this behavior? Any help is greatly appreciated!

I want to get Cover-Art Image over Bluetooth. From the SDP Discover iPhoneSE, it support Cover-Art Feature. I connect and config OBEX Channel with L2CAP ERTM, it is successful. I send connect_request the OBEX Connect, the iPhone always no any response, and l2cap s-frame response from iPhone always failed. From the Apple Developer, it need Apple Authentication Chip. Is it still necessary now? Are there any other ways to obtain album pictures?

I am developing the electronic part of product, it includes a Find-My features. I saw some forum that testing Find-My feature needs a CSR and testing token. Can anyone teach me how to apply CSR and testing token step by step? Thank you very much. Best regards Sam Ng

After hardware and mobile phone hid mode pairing, the first connection is successful, after a while disconnect and reconnect,APP monitoring Bluetooth error NSLocalizedDescription = "Peer removed pairing information"; Failed to connect Hardware engineers detect the pairing information and find that the local pairing information of the iPhone has changed, which is a non-mandatory phenomenon

Our company is developing an MFi headset with a button that we would like to use for initiating PTT. We can detect the button press and initiate PTT successfully, even when the app is not in the foreground, using the ExternalAccessory framework. But I wonder if this is a coincidence, or a scenario that should reliably work with Push to Talk?

Hi, as other threads have already discussed, I'd like to record audio from a keyboard extension. The keyboard has been granted both full access and microphone access. Nonetheless whenever I attempt to start a recording from my keyboard, it fails to start with the following error: Recording failed to start: Error Domain=com.apple.coreaudio.avfaudio Code=561145187 "(null)" UserInfo={failed call=err = PerformCommand(*ioNode, kAUStartIO, NULL, 0)} This is the code I am using: import Foundation import AVFoundation protocol AudioRecordingServiceDelegate: AnyObject { func audioRecordingDidStart() func audioRecordingDidStop(withAudioData: Data?) func audioRecordingPermissionDenied() } class AudioRecordingService { weak var delegate: AudioRecordingServiceDelegate? private var audioEngine: AVAudioEngine? private var audioSession: AVAudioSession? private var isRecording = false private var audioData = Data() private let targetFormat = AVAudioFormat(commonFormat: .pcmFormatInt16, sampleRate: 16000, channels: 1, interleaved: false)! private func setupAudioSession() throws { let session = AVAudioSession.sharedInstance() try session.setCategory(.playAndRecord, mode: .spokenAudio, options: [.mixWithOthers, .allowBluetooth, .defaultToSpeaker]) try session.setPreferredIOBufferDuration(0.005) try session.setActive(true, options: .notifyOthersOnDeactivation) audioSession = session } func checkMicrophonePermission(completion: @escaping (Bool) -> Void) { switch AVAudioApplication.shared.recordPermission { case .granted: completion(true) case .denied: delegate?.audioRecordingPermissionDenied() completion(false) case .undetermined: AVAudioApplication.requestRecordPermission { [weak self] granted in if !granted { self?.delegate?.audioRecordingPermissionDenied() } completion(granted) } @unknown default: delegate?.audioRecordingPermissionDenied() completion(false) } } func toggleRecording() { if isRecording { stopRecording() } else { checkMicrophonePermission { [weak self] granted in if granted { self?.startRecording() } } } } private func startRecording() { guard !isRecording else { return } do { try setupAudioSession() audioEngine = AVAudioEngine() guard let engine = audioEngine else { return } let inputNode = engine.inputNode let inputFormat = inputNode.inputFormat(forBus: 0) audioData.removeAll() guard let converter = AVAudioConverter(from: inputFormat, to: targetFormat) else { print("Failed to create audio converter") return } inputNode.installTap(onBus: 0, bufferSize: 1024, format: inputFormat) { [weak self] buffer, _ in guard let self = self else { return } let frameCount = AVAudioFrameCount(Double(buffer.frameLength) * 16000.0 / buffer.format.sampleRate) guard let outputBuffer = AVAudioPCMBuffer(pcmFormat: self.targetFormat, frameCapacity: frameCount) else { return } outputBuffer.frameLength = frameCount var error: NSError? converter.convert(to: outputBuffer, error: &error) { _, outStatus in outStatus.pointee = .haveData return buffer } if error == nil, let channelData = outputBuffer.int16ChannelData { let dataLength = Int(outputBuffer.frameLength) * 2 let data = Data(bytes: channelData.pointee, count: dataLength) self.audioData.append(data) } } engine.prepare() try engine.start() isRecording = true delegate?.audioRecordingDidStart() } catch { print("Recording failed to start: \(error)") stopRecording() } } private func stopRecording() { audioEngine?.inputNode.removeTap(onBus: 0) audioEngine?.stop() isRecording = false let finalData = audioData audioData.removeAll() delegate?.audioRecordingDidStop(withAudioData: finalData) try? audioSession?.setActive(false, options: .notifyOthersOnDeactivation) } deinit { if isRecording { stopRecording() } } } Granting the deprecated "Inter-App Audio" capability did not solve the problem either. Is recording audio from a keyboard extension even possible in general? If so, how do I fix it? Related threads: https://developer.apple.com/forums/thread/108055 https://developer.apple.com/forums/thread/742601

Hi everyone, I am seeking clarification regarding the communication capabilities between an ESP32 microcontroller and Apple's latest devices, specifically the iPhone 16 Pro Max and iPad Pro, both equipped with USB-C ports. Background: MFi Certification: Historically, establishing communication between external devices and iOS devices required MFi (Made for iPhone/iPad) certification. But I remember this being necessary in the Lightning Cable to USB era. With the introduction of USB-C ports in recent iPhone and iPad models, there is an indication that MFi certification may no longer be necessary for certain peripherals. Perhaps I'm not confident on the terminology here: https://mfi.apple.com/en/who-should-join Project Requirements: I am working on a sensor research project that necessitates the collection of low-latency time-series data from an ESP32 microcontroller, which features a USB-C port. The data needs to be transmitted to an iPhone 16 Pro Max or iPad Pro. Bluetooth communication has proven insufficient due to its limited data transfer rates (~1.2 Mbps with L2CAP). While NEHotspot could be an alternative, it restricts the iPad's internet connectivity. Therefore, establishing a direct USB-C connection between the ESP32 and the iOS device appears to be the most viable solution. Questions: MFi Certification Necessity: Is MFi certification still required for an ESP32 microcontroller to communicate with iPhone 16 Pro Max or iPad Pro via USB-C? USB-C Communication Support: Do the iPhone 16 Pro Max and iPad Pro natively support serial communication over USB-C with microcontrollers like the ESP32? If not, are there recommended protocols or interfaces to facilitate this communication? App Development Considerations: Would developing a custom iOS application be necessary to handle data transmission from the ESP32 over USB-C? If so, are there specific APIs or frameworks provided by Apple to support this functionality? Data Transfer Rates: Considering the need for high-speed data transfer, are there any limitations or considerations regarding the data transfer rates achievable through a USB-C connection between the ESP32 and iOS devices? Thank you!

Since 17.4 Dev Beta 2, I have been having Bluetooth issues. I had hoped it would have cleared up but even in 17.4.1 it continues. Airpod and Echo Auto are the only 2 audio devices I have. The audio will become chopping, rubber band or sound robotic and sometime completely disconnect. While driving it will occur on both audio devices. Sometimes I'm stopped at red light and the issue occurs. The phone is less than 3 feet from the device at all times. I have read forums and removed and readded the devices but that did not help. I really do not want to have to reset my phone since my 2FA apps do not recover in a restore. Anyone have any suggestions?

Will UVC native support come for the Iphone as well? So, using external cameras with the ipad is greatly beneficial, but for the iphone, it can make it a production powerhouse! So, have there been discussions around bringing UVC support for the Iphone as well? and if so, what were your conclusions?

This is a regression since iOS 13. Is there no-one at Apple interested in fixing this? FB9856371

I am creating a barcode reader using the AVfoundation framework for iOS and IPadOS. The read result goes into payloadstringvalue, but I want to check the control characters contained in the symbol, so I am using the raw data of the description, which is a property of NSObjectProtocol inherited by VNBarcodeObservation. However, I noticed that if the length set in the raw data exceeds 26, some of the raw data in the description is omitted. So my question is, is it possible to set it so that all the raw data in the description is written out without omitting any raw data? If so, could you please tell me how to set this up? Also, if you know of any other way to extract the raw barcode data, I would appreciate it if you could let me know. Thank you.

Hello everybody, I have a never ending issue with appstore review, an need a QUICK HELP ! I am submitting a new app (oral training), for Iphones only. I disabled other devices (such as Ipas) via Xcode. In the appstore informations form, it is obligatory to provide ipad screens, so I provided screens showing Iphone experience. Appstore team asked me to remove it because I don't authorize Ipads. But if I remove those screens, form cannot be sent. I don't understantd how to proceed. Thanks for the help Regards Jean

Updated version of this post My HomePod mini is now on version 16.4, so the the temperature and humidity sensors are enabled. The data properly shows up in the Home app on my various devices. In my HomeKit iPad app running on Mac Catalyst, however, the data does not show up. I would expect the HomePod mini to show up in HMHome.accessories with a service of type HMServiceTypeTempatureSensor. I see all of my other HomeKit accessories, just not the HomePod mini. I have tried with the latest Xcode (14.3) and highest available iOS Target and Minimum Deployment (16.4), macOS version 13.3. I have not, as of this writing, upgraded my HomeKit architecture, however. Note that I haven't tried the app on an actual iPad (and the iOS simulator doesn't expose my HomeKit environment.)

Dove in and upgraded two Macs today to beta 1. Unfortunately, it appears L2TP VPN is broken or something changed in the way it works. I can longer get a connection to any VPN concentrator I used previously. I tested with Cisco Anyconnect SSL VPN client and can connect to the same concentrators (as they're configured to accept L2TP or SSL clients). I also tested from my phone running iOS 16 beta and it still works for the L2TP connections. The Mac not working with L2TP VPN ppp.log shows this Fri Jun 10 19:18:52 2022 : L2TP connecting to server 'IP removed' (IP removed)... Fri Jun 10 19:18:52 2022 : IPSec connection started Fri Jun 10 19:18:52 2022 : IPSec phase 1 client started Fri Jun 10 19:19:02 2022 : IPSec connection failed Connecting a Mac successfully on 12.4 the log shows Fri Jun 10 19:12:33 2022 : L2TP connecting to server 'IP removed' (IP removed)... Fri Jun 10 19:12:33 2022 : IPSec connection started Fri Jun 10 19:12:33 2022 : IPSec phase 1 client started Fri Jun 10 19:12:33 2022 : IPSec phase 1 server replied Fri Jun 10 19:12:34 2022 : IPSec phase 2 started Fri Jun 10 19:12:34 2022 : IPSec phase 2 established Fri Jun 10 19:12:34 2022 : IPSec connection established (and then a ton more lines of the entire process ending with client getting an IP that I won't bother posting) VPN wasn't high on my list of apps I was concerned about breaking with the beta. But, now that it is broke and I need it for work I'm kinda screwed myself. Anyway, if anyone knows a way to fix this please let me know.

Hello I've noticed that this product, heavily promoted on the ASC forums for many years, is no longer available from the Apple App Store. Can anyone tell me the reason why the product is no longer supported? Friends have asked me if it is 'safe' to use. Is it? Note to moderator: If I'm asking in the wrong places, please redirect my question. Thank you.

as i want to tract activity of iphone user using core motion framework , guide me through .

G'day. At my office the doors are locked with an NFC reader. We carry around a little NFC tag on our key chains which will read out a number and this then will open the door if the number matches a number in the database. I am tired of carrying around the tag, people keep loosing it, forgetting it and it would be nice to open the door using a Phone - which we tend to always have on us. So I used a credit card which is NFC enabled to readout the NFC information, added this number to the database and can now open doors using my credit card. This is pretty cool. If I forget my keys (most likely they will be on the desk but silly me left the desk without them), I may have my wallet with me. Then I tried Wallet.app on my iPhone and select the same credit card. However the door doesn't open. When looking in the door software I noticed that the tags will always transmit the same number. So does my credit card. However Wallet.app will read out 4 readings (or maybe just one very long one) and they are always different. So I can not make them match with the door database. Any ideas how to make this work? Can I give somehow wallet.app an NFC number which I can then add to my door database? Or how come the credit card and the very same one in wallet.app don't match? Thanks for your help! Would be neat if I could make this work out. This will make a lot of people happy at my office! Cheers!

Previously discussed in beta:https://forums.developer.apple.com/message/330295This process stops responding every day it seems, I'm running 10.14.3 (18D109)When the process hangs, its Open Files and Ports include the following:txt /Library/Preferences/Logging/.plist-cache.ZP6RP0OT txt /private/var/db/timezone/tz/2018i.1.0/icutz/icutz44l.dat txt /usr/share/icu/icudt62l.dat txt /private/var/folders/35/dgpwsg457w17gs77hssnrbnw0000gn/0/com.apple.LaunchServices-231-v2.csstoreThose are not open when the service is running (before it hangs)Would like to know how frequently this hangs for everyone else and get steps to troubleshoot if possible.