Prevent access to the Screen Time API without guardian approval and provide opaque tokens that represent apps and websites.

All subtopics
Posts under Family Controls topic

Post

Replies

Boosts

Views

Activity

eventDeviceActivityThreshold from DeviceActivity will fire early and block apps after downloading iOS 26.2
A screen time app I'm making has started telling users that their limit was reached even when they're far below their limit for the day (sometimes even at 0 minutes for the day). This issue only started happening after upgrading my software to iOS 26.2. Is this happening to anyone else? If so how have you found any solutions or does anyone know of any changes that could be causing this? Any help would be appreciated.
4
1
603
1w
Scheduled events reach threshold almost immediately on iOS 26.2
Hi, we are developing a screen time management app. The app locks the device after it was used for specified amount of time. After updating to iOS 26.2, we noticed a huge issue: the events started to fire (reach the threshold) in the DeviceActivityMonitorExtension prematurely, almost immediately after scheduling. The only solution we've found is to delete the app and reboot the device, but the effect is not lasting long and this does not always help. Before updating to iOS 26, events also used to sometimes fire prematurely, but rescheduling the event often helped. Now the rescheduling happens almost every second and the events keep reaching the threshold prematurely. Can you suggest any workarounds for this issue?
4
2
386
1w
DeviceActivityReportExtension sandbox blocks all output channels — how to export resolved Application.bundleIdentifier?
DeviceActivityReportExtension sandbox blocks all output channels — how to export resolved Application.bundleIdentifier? Application.bundleIdentifier only resolves to a non-nil value inside a DeviceActivityReportExtension (ExtensionKit/XPC). The main app and DeviceActivityMonitor extension always return nil. However, the Report Extension's sandbox silently blocks every output channel I've tested: UserDefaults (App Group): Reads succeed, writes silently dropped File writes (App Group container): Fail silently or throw HTTP requests: Network blocked entirely Local Notifications: "Couldn't communicate with a helper application" UIPasteboard: Writes silently fail iCloud KVS: synchronize() returns false Both targets share the same com.apple.security.application-groups entitlement and group identifier. The main app reads and writes to the shared container normally — only the extension's writes fail. This means resolved bundle identifiers can only be rendered in the extension's own SwiftUI view and cannot be communicated anywhere else. My question: Is this sandbox restriction intentional? If so, what is the recommended mechanism for the host app (or a backend) to obtain the resolved bundle identifiers that only the Report Extension can access? Environment: Xcode 16.3, iOS 18.3, physical device. Sample project: https://drive.google.com/file/d/1DPyN2BCUt5p-RKEPA0zsDFFEvgZVHlS_/view?usp=sharing — a minimal two-target project that demonstrates every failing channel. Run on a physical device, grant Screen Time access, select apps, and observe that bundle ID resolution shows PASS but all write channels show FAIL.
4
0
181
2w
Family Controls Request Form
Hi everyone, I recently submitted the Family Controls request form and received the following request IDs: 429MKWT5VX
 KNL6T2DC7A
 N62KV78DKC However, I haven’t received any updates yet and I’m not sure how these requests are tracked or when we’ll know if they’re approved. Our app is almost ready to launch and this capability is critical for us. Both the main app and an extension depend on Family Controls, so we’re currently blocked from moving forward. I also raised a support ticket with Apple Developer Support (Case ID: 102838723073), but I haven’t received any response there either. To be honest, this is becoming really stressful. Months of work are stuck at the final step and we’re unable to move forward without this approval. This isn’t just a small personal project and we’re building a production app and were hoping to launch very soon. If anyone has been through this process or has any guidance on the approval timeline, or if someone from Apple could help look into these request IDs, it would genuinely mean a lot to us.

 Thank you
4
0
622
1w
DeviceActivityMonitor extension rejected by App Store Connect validator — NSExtensionPointIdentifier "com.apple.deviceactivity.monitor" invalid (IrisAPI -19241)
Hi everyone, I'm building an iOS app that uses a DeviceActivityMonitor app extension as part of the Screen Time / Family Controls API. Every time I try to upload my IPA to App Store Connect, the validation fails with this error: "Invalid Info.plist value. The value of the NSExtensionPointIdentifier key, com.apple.deviceactivity.monitor, in the Info.plist of 'Alexandria.app/PlugIns/AlexandriaActivityMonitor.appex' is invalid." Error Domain=IrisAPI Code=-19241, iris-code=STATE_ERROR.VALIDATION_ERROR What I have verified (everything looks correct): NSExtensionPointIdentifier = com.apple.deviceactivity.monitor NSExtensionPrincipalClass = AlexandriaActivityMonitor.AlexandriaActivityMonitorExtension (correctly resolved in the compiled binary, verified with plutil -p) The Swift class correctly subclasses DeviceActivityMonitor CFBundleShortVersionString matches the main app Both the main app and extension provisioning profiles explicitly contain com.apple.developer.family-controls = true (verified by inspecting embedded.mobileprovision inside the IPA) The binary code signature itself contains com.apple.developer.family-controls = true (verified with codesign -d --entitlements :-) Family Controls entitlement was requested and approved in the Developer Portal for both App IDs Tested with both Xcode 26.2 (iOS 26 SDK) and Xcode 16.4 (iOS 18 SDK) — same error in both cases The IPA is structurally correct. The error comes purely from Apple's server-side IrisAPI validator and does not correspond to anything I can identify or fix in the code or configuration. Has anyone successfully submitted an app with a DeviceActivityMonitor extension to App Store Connect recently? Is there a backend approval requirement for com.apple.deviceactivity.monitor beyond the standard Family Controls entitlement approval? Could this be a known validator bug for this specific extension type? Any help appreciated.
4
1
179
21h
ShieldConfigurationExtension not working
I created a ShieldConfigurationExtension in Xcode 14.3 with File > New > Target > ShieldConfigurationExtension. This created the extension with all the necessary Info.plist values (correct NSExtensionPrincipalClass, etc.), with the extension included in embedded content in the host app target. No matter what I try, the extension is not getting invoked when I shield applications from my host app. The custom UI does not show as the shield, and looking at the debugger, an extension process is never invoked. I am shielding categories like this: let managedSettings = ManagedSettingsStore() ... managedSettings.shield.applicationCategories = .all() And my extension code overrides all the ShieldConfigurationDataSource functions. class ShieldConfigurationExtension: ShieldConfigurationDataSource { override func configuration(shielding application: Application) -> ShieldConfiguration { return ShieldConfiguration( backgroundBlurStyle: UIBlurEffect.Style.systemThickMaterial, backgroundColor: UIColor.white, icon: UIImage(systemName: "stopwatch"), title: ShieldConfiguration.Label(text: "You are in a Present Session", color: .yellow) ) } override func configuration(shielding application: Application, in category: ActivityCategory) -> ShieldConfiguration { return ShieldConfiguration( backgroundBlurStyle: UIBlurEffect.Style.systemThickMaterial, backgroundColor: UIColor.white, icon: UIImage(systemName: "stopwatch"), title: ShieldConfiguration.Label(text: "You are in a Present Session", color: .yellow) ) } override func configuration(shielding webDomain: WebDomain) -> ShieldConfiguration { return ShieldConfiguration( backgroundBlurStyle: UIBlurEffect.Style.systemThickMaterial, backgroundColor: UIColor.white, icon: UIImage(systemName: "stopwatch"), title: ShieldConfiguration.Label(text: "You are in a Present Session", color: .yellow) ) } override func configuration(shielding webDomain: WebDomain, in category: ActivityCategory) -> ShieldConfiguration { return ShieldConfiguration( backgroundBlurStyle: UIBlurEffect.Style.systemThickMaterial, backgroundColor: UIColor.white, icon: UIImage(systemName: "stopwatch"), title: ShieldConfiguration.Label(text: "You are in a Present Session", color: .yellow) ) } } What am I missing?
5
2
2.9k
Jun ’25
FamilyActivityPicker Crash on selecting some items
Both view and modifier versions of the FamilyActivityPicker crash randomly when selecting some items (usually the other option) throwing these in the console: [com.apple.FamilyControls.ActivityPickerExtension(1150.1)] Connection to plugin invalidated while in use AX Lookup problem - errorCode:1100 error:Permission denied portName:'com.apple.iphone.axserver' PID:22091 ( 0 AXRuntime 0x00000001c603b0fc _AXGetPortFromCache + 800 1 AXRuntime 0x00000001c603cce0 AXUIElementPerformFencedActionWithValue + 700 2 UIKit 0x0000000230de3ec8 DDE6E0C5-2AC3-3C73-8CFE-BC88DE35BB5F + 1453768 3 libdispatch.dylib 0x0000000103ef0b98 _dispatch_call_block_and_release + 32 4 libdispatch.dylib 0x0000000103ef27bc _dispatch_client_callout + 20 5 libdispatch.dylib 0x0000000103efa66c _dispatch_lane_serial_drain + 832 6 libdispatch.dylib 0x0000000103efb408 _dispatch_lane_invoke + 408 7 libdispatch.dylib 0x0000000103f08404 _dispatch_root_queue_drain_deferred_wlh + 328 8 libdispatch.dylib 0x0000000103f07a38 _dispatch_workloop_worker_thread + 444 9 libsystem_pthread.dylib 0x00000001f0824f20 _pthread_wqthread + 288 10 libsystem_pthread.dylib 0x00000001f0824fc0 start_wqthread + 8 ) This also happens in production apps like the Opal. The questions are: At least how to detect it to be able to manually reload the sheet (like what Opal does and shows an alert when this happens) How to prevent it in the first place? I really appreciate any help you can provide.
5
2
1.7k
Aug ’25
Summary of issues encountered with the Screen Time interface
I have developed three apps using the Screen Time API. The following are common problems I encountered in the three apps: DeviceActivityMonitorExtension is automatically killed after running for a few days (frequently) The same DeviceActivityEvent in DeviceActivityMonitorExtension is triggered twice during eventDidReachThreshold (especially obvious in iOS18.5) Screen Time authorization is automatically canceled for no reason (occasionally) I hope to get help
5
2
339
Jun ’25
Need com.apple.developer.managed-settings entitlement
Hello, I already have got approval from Apple for com.apple.developer.family-controls entitlement When I am building my app, there is one part where I need to check the list of applications which I have blocked with my app. To get the list I have to have com.apple.developer.managed-settings entitlement ... Now how and where show I get hold of it ? I already got permission for Family Control, how do I get hold of this now ?
5
0
220
Jul ’25
iOS 26.2 (23C55): DeviceActivity eventDidReachThreshold fires with 0 Screen Time minutes
On iOS 26.2 (23C55), DeviceActivityMonitor.eventDidReachThreshold fires intermittently for a daily schedule (00:00–23:59) even when iOS Screen Time shows 0 minutes for the selected apps that day. This causes premature shielding via ManagedSettings. Environment: iPhone 13 Pro Max, iOS 26.2 (23C55). Event selection: 2 apps. Threshold: 30 minutes. Multiple TestFlight users report the same behavior across various app selections and thresholds. Intermittent (~50% of days); sometimes multiple days in a row. Not observed in testing prior to iOS 26.2. Evidence: sysdiagnose + Screen Time screenshots (with 0 screen time on selected apps) + unified logs show UsageTrackingAgent notifying the extension that “unproductive from activity daily reached its threshold,” followed immediately by ManagedSettings shield being applied (extension reacting to the callback). Filed Feedback Assistant: FB21450954. Questions: Are others seeing this on 26.2? Does it correlate with restarting monitoring at interval boundaries or includesPastActivity settings?
5
2
973
3w
Changing Screen Time Passcode does not protect apps with Screen Time enabled
Hello, The purpose of "Screen Time Passcode" under Settings/Screen Time is to protect Screen Time preferences and it is asked every time the user updates Downtime, App Limits, Content & Privacy Restrictions and so on. But the private passcode is not requested if the user disables Screen Time for a particular app (only Face ID or phone passcode is requested, but not the private Screen Time passcode). I think this is a mistake, I think the purpose of a private Screen Time passcode is to protect all settings, including apps that use this API, right? Is there any solution to this? Thank you.
6
4
4.3k
May ’25
Open Parent App From ShieldActionDelegate
Hello, I’m building an app that helps people spend less time on social media apps. For that, I make heavy use of Apple’s Screen Time APIs, such as ManagedSettings and FamilyControls. When an app is locked using a ShieldConfiguration, the user has to open my app in order to unlock it (e.g. enter a code). This is very cumbersome because no documented API exists to open the parent app (=my app) from the ShieldActionDelegate (also part of my app) when the user presses a button of the ShieldConfiguration. The ShieldActionDelegate callback just offers three options in its ShieldActionResponse: .none .defer .close .openParentApp is missing. We are working around this limitation by sending a local push notification that the user has to tap on. This has multiple drawbacks: It has to be ensured that notification permission has been granted. It has to be ensured that notifications can be delivered even while focus is enabled. Features such as Apple Intelligence notification summaries and notification prioritization can heavily delay delivering notifications and thus frustrate the user. Neither my users nor myself do understand why this is not possible in a smoother way, at least according to the documentation. There are 3rd party apps that have such functionality, they can directly open their own app from a button press in the Shield, see here: https://apps.apple.com/us/app/applocker-passcode-lock-apps/id1132845904 It would be great if Apple could level the playfield for all developers and document how this is achievable, because technically it clearly is. Thanks a lot and have a great day!
6
1
720
Jul ’25
Family Controls entitlement request submitted on March 9, 2026 — no response or status update
Hi, I submitted a Family Controls (Distribution) entitlement request on March 9, 2026 for my iOS app, but I still have not received any approval, rejection, or other status update. At this point, I’m mainly trying to understand: whether this waiting time is currently normal, whether there is any way to check if the request is actually under review, and whether Apple provides any follow-up if more information is needed. This is blocking my progress, because the app depends on the Screen Time / Family Controls APIs. Has anyone recently experienced similar delays, and is there any recommended next step besides waiting? Thanks. Imi
6
1
443
1w
Family Controls Entitlement NOT applied to App Extensions (and Support Form is broken)
Hello, I am facing a critical issue where the Family Controls (Distribution) entitlement is not being applied to my app extensions, despite the main app ID being approved. Main App ID: com.hayashikento.focuspact (Approved on March 13) Extension ID 1: com.hayashikento.focuspact.ShieldActionExtension (Pending/Not visible) Extension ID 2: com.hayashikento.focuspact.ShieldConfigurationExtension (Pending/Not visible) I have submitted requests multiple times, but the entitlement does not appear in the "Capability Requests" for these extensions in the Certificates, Identifiers & Profiles portal. Furthermore, I am unable to contact Developer Support because the "Contact Us" form on the developer website consistently shows a "Request error" or freezes on the submission page. Since I am completely blocked from TestFlight distribution, could someone from Apple please look into my account (Team ID: UHG4J7F7NH) and manually sync these entitlements? Thank you for your help.
6
0
133
1w
ApplicationTokens changing
We persist ApplicationTokens in a storage container that ShieldConfigurationExtension has access to. In rare, cases all the ApplicationTokens for a user seem to change. We know this because the Application parameter passed into configuration(shielding application: Application) -> ShieldConfiguration function has a Token that does not match (using == ) any of the ones we are persisting in storage. Interestingly, the persisted ones still work, so I don't believe storage has gotten corrupted or anything. We can use them to add or remove shields, we can use them to display labels of the apps they represent, etc. But they don’t match what’s passed into the ShieldConfiguration extension. If the user goes into the FamilyPicker at this point and selects an app of a token that we are already persisting, the FamilyPickerSelection will have a token matching the new one that is passed into ShieldConfigurationExtension, not the one we persisted when they last selected that app. This leads me to believe the tokens are updated/rotated in some cases. When and why does this happen, and how can we handle it gracefully?
7
4
1.8k
Jul ’25
How to open parent app from `ShieldActionDelegate`
Hello, I think it is quite a common use-case to open the parent app that owns the ShieldActionDelegate when the user selects an action in the Shield. There are only three options available that we can do in response to an action: ShieldActionResponse.none ShieldActionResponse.close ShieldActionResponse.defer It would be great if this new one would be added as well: ShieldActionResponse.openParentApp While finding a workaround for now, the problem is that the ShieldActionDelegate is not a normal app extension. That means, normal tricks do not work to open the parent app from here. For example, UIApplication.shared.open(url) does not work because we can’t access UIApplication from the ShieldActionDelegate unfortunately. NSExtensionContext is also not available in the ShieldActionDelegate unfortunately, so that’s also not possible. There are apps however, that managed to find a workaround, in my research I stumbled across these two: https://apps.apple.com/de/app/applocker-passcode-lock-apps/id1132845904?l=en-GB https://apps.apple.com/us/app/app-lock/id6448239603 Please find a screen recording (gif) attached. Their workaround is 100% what I’m looking for, so there MUST be a way to do so that is compliant with the App Store guidelines (after all, the apps are available on the App Store!). I had documented my feature request more than 2 years ago in this radar as well: FB10393561
8
3
1.8k
Nov ’25
Issue with Universal Links and App Extension (ShieldAction Handler)
Issue with Universal Links and App Extension (ShieldAction Handler) I'm currently working on a POC app using the FamilyControls framework and facing an issue when trying to open a Universal Link from an app extension, specifically from a ShieldAction handler. When I try to open a Universal Link, I encounter the following error: Failed to open URL https://sixteen-server-c008110f8759.herokuapp.com/.well-known/apple-app-site-association: Error Domain=FBSOpenApplicationServiceErrorDomain Code=1 "The request to open 'com.apple.mobilesafari' failed." UserInfo={BSErrorCodeDescription=RequestDenied, NSUnderlyingError=0x14f2d90b0 {Error Domain=FBSOpenApplicationErrorDomain Code=3 "Application com.sixteen.life is neither visible nor entitled, so may not perform un-trusted user actions." UserInfo={BSErrorCodeDescription=Security, NSLocalizedFailureReason=Application com.sixteen.life is neither visible nor entitled, so may not perform un-trusted user actions.}} Context: I’m using a ShieldAction handler as part of an App Extension to trigger the action (e.g., "Break in Shield") in my app. The app extension (ShieldAction handler) is responsible for trying to open the Universal Link. I’m encountering the error because the app is not visible or entitled to perform this action, which seems to be related to security restrictions when using App Extensions. Questions: App Extension and Universal Link Interaction: Is it possible for an App Extension (like ShieldAction handler) to open a Universal Link or trigger an external app, such as Safari, even though it is not the foreground app? Entitlements for App Extensions: Are there any specific entitlements or permissions required to allow an app extension (ShieldAction handler) to open Universal Links or perform actions like opening Safari from the background? App Visibility and State: How can I ensure that my app is in the right state (visible/active) and has the necessary entitlements to trigger these actions when running in the context of an app extension? Workaround: If this behavior is restricted due to app extension limitations, what would be the recommended workaround to handle launching external apps (like Safari) or Universal Links from within an app extension?
9
0
474
Jul ’25
DeviceActivityMonitor is overcounting screen time for users on iOS 17.6.1
Our app uses a 24-hour DeviceActivityMonitor repeating schedule to send users notifications for every hour of screen time they spend on their phone per day. Notifications are sent from eventDidReachThreshold callbacks at 1, 2, 3, etc, hour thresholds to keep them aware of their screen time. We have recently received an influx of emails from our users that after updating to iOS 17.6.1 their DeviceActivityMonitor notifications are saying their screen time was much higher than what is shown in DeviceActivityReport and their device's Screen Time settings. These users have disabled "Share Across Devices" - but I suspect the DeviceActivityMonitor is still getting screen time from their other devices even though that setting is turned off. Has anybody else noticed this, understands what is causing this, or could recommend a fix that we can tell our users to do?
10
9
2.2k
Oct ’25
Guidance on implementing Declared Age Range API in response to Texas SB2420
I've spent the last few days researching the upcoming laws in Texas and other US states, and how these laws will impact on developers around the world. I want to share what I've learned so far with the community and get feedback on my current understanding. This post is not so much focused on a single API, but more of the bigger picture. Background The law essentially mandates that: (1) app store platforms implement age categorization and verification mechanisms, and (2) developers implement logic to listen to age categorization signals provided by the platform and respond accordingly. You can read the law itself here: https://capitol.texas.gov/tlodocs/89R/billtext/html/SB02420S.HTM Most people seem to be interpreting the law as follows: All developers who distribute apps in the USA are effectively required to implement the new APIs (required by Texas, not by Apple). The penalties are heavy, but it's unclear whether developers would actually be pursued and by whom (e.g. would someone seriously pursue an alarm clock app because it could be accessed by a minor?). Putting aside the ethical, privacy, and legal issues (and the damaging precedents this law sets), most people seem to agree that, from a technical perspective, this is a very silly way to implement age blocking (app store collects the info and passes it to dev, dev is responsible for blocking access). It would make way more sense for the platform to block the app directly for affected users (with optional API support for developers who wish to use it). However, I believe the law has specifically mandated that this is how they expect the system to work, so Apple's hands have been tied. Apple has basically complied with their obligations by providing the relevant APIs to developers. Because the law is vague and open-ended, there are a lot of legal and technical uncertainties about what developers actually need to do to be compliant. Understandably, Apple seems reticent to provide any guidance to developers that could be interpreted as legal advice. Apple's docs simply describe what the APIs do with no guidance on what the overall flow is meant to look like or how and when the APIs should actually be used in practice. Americans familiar with the political situation seem to think there's the possibility of an injunction before this law goes into effect, but that looks increasingly unlikely given that it's two weeks away. Developer solutions Many devs seem to be exploring two main workarounds, at least as temporary solutions: (1) Raise your app's rating to 18+. Putting aside the fact that Texas law would effectively be forcing developers to raise their global age rating (resulting in lost revenue that extends far beyond Texas), it remains unclear whether this solution is actually legally compliant, since the law specifically mandates that apps must implement logic to respond to signals from the platform. (2) Geo-block Texas. Again, it remains unclear if this is compliant because geo-blocking is not 100% accurate and it doesn't actually do what the law says you have to do. It also creates issues if you already have users in Texas, and it means performing additional privacy-hostile checks (i.e., detecting the user's location, even users who are not subject to the law). The DeclaredAgeRange API is actually pretty straight-forward to use – although there is still a lack of documentation on certain edge cases and it's difficult to test. In addition, the new APIs are only available in iOS 26.2, so it's unclear what you need to do if you're still supporting < iOS 26.2. Some people are of the opinion that developers can only reasonably respond to the signals that are available, thus pushing responsibility back to the platforms in regards to earlier OS versions. The API provides a bool (AgeRangeService.shared.isEligibleForAgeFeatures), which allows you to determine if the user is someone to whom age checks need to be applied. https://developer.apple.com/documentation/declaredagerange/agerangeservice/iseligibleforagefeatures I'm not 100% sure, but perhaps the simplest action you can take is to check this bool on launch and block access if it's true. In any case, it looks like this API will be very useful because it means we can avoid applying the checks in other jurisdictions and for grandfathered-in users without needing to implement custom geo-tracking code (albeit only in iOS 26.2+). To implement the API, my current thinking is that, on every launch, I should first check the above bool and, if it's true, do the following: (1) get the App Store age rating with let appStoreAgeRating = await AppStore.ageRatingCode ?? 18, (2) request the user's age with let ageRangeResponse = try await AgeRangeService.shared.requestAgeRange(ageGates: appStoreAgeRating), (3) check that the user has agreed to share their age, (4) check that lowerBound >= appStoreAgeRating, and (5) check that the verification method is not one of the self-declared methods. If this procedure fails, I should block access to the app and provide a link to Apple's support page: https://support.apple.com/en-us/122770 I stress, however, that this is just my current idea and there are some edge cases I'm unsure about. Other issues It is possible to do some basic testing of the API, but only using a sandbox App Store account on a physical device. From the Developer section in iOS Settings, you can select from a few different scenarios, like "Texas user aged 14 without parental consent", etc. There's also a whole separate aspect to this law relating to "significant updates". Everyone seems kinda confused about this, but it seems like the general idea is that, if your app's age classification changes in the future, the app should be responsive to that change. My current interpretation is that if I use the AppStore.ageRatingCode as the age gate (as described above) then that should allow me to comply, but I haven't really looked into this aspect of the law yet. There's also another aspect to this law requiring developers to revoke access to the app when requested by the parent. I have not looked into this yet, but as noted above, it doesn't make sense to me why this is the developer's responsibility given that the platforms already provide solid parental controls. Do I need to something else in addition to what I've sketched out above? It goes without saying, of course, that everything above is not legal advice, and I still have some gaps in my understanding. I would really appreciate any feedback on the above, perhaps with recommendations about better ways to approach this.
10
1
1.5k
Jan ’26
DeviceActivityReportExtension: NSExtensionPrincipalClass required by App Store but rejected at runtime
I'm experiencing a contradictory validation issue with DeviceActivityReportExtension that creates an impossible situation: The Problem: Without NSExtensionPrincipalClass in Info.plist → App Store Connect rejects upload with: "Missing Info.plist values. No values for NSExtensionMainStoryboard or NSExtensionPrincipalClass found" With NSExtensionPrincipalClass → Local install fails with: "defines either an NSExtensionMainStoryboard or NSExtensionPrincipalClass key, which is not allowed for the extension point com.apple.deviceactivityui.report-extension" Setup: Extension point: com.apple.deviceactivityui.report-extension Using SwiftUI with @main attribute and DeviceActivityReportExtension protocol Xcode 16.2, iOS 17.6 deployment target Code structure: @main struct SpoolReport: DeviceActivityReportExtension { var body: some DeviceActivityReportScene { // Report scenes here } } The extension builds and runs perfectly without NSExtensionPrincipalClass, but cannot be uploaded to App Store Connect. Adding the key allows upload but breaks local installation. Is this a known issue? Is there a workaround or correct Info.plist configuration for DeviceActivityReportExtension? Thank you!
10
2
645
3w
eventDeviceActivityThreshold from DeviceActivity will fire early and block apps after downloading iOS 26.2
A screen time app I'm making has started telling users that their limit was reached even when they're far below their limit for the day (sometimes even at 0 minutes for the day). This issue only started happening after upgrading my software to iOS 26.2. Is this happening to anyone else? If so how have you found any solutions or does anyone know of any changes that could be causing this? Any help would be appreciated.
Replies
4
Boosts
1
Views
603
Activity
1w
Scheduled events reach threshold almost immediately on iOS 26.2
Hi, we are developing a screen time management app. The app locks the device after it was used for specified amount of time. After updating to iOS 26.2, we noticed a huge issue: the events started to fire (reach the threshold) in the DeviceActivityMonitorExtension prematurely, almost immediately after scheduling. The only solution we've found is to delete the app and reboot the device, but the effect is not lasting long and this does not always help. Before updating to iOS 26, events also used to sometimes fire prematurely, but rescheduling the event often helped. Now the rescheduling happens almost every second and the events keep reaching the threshold prematurely. Can you suggest any workarounds for this issue?
Replies
4
Boosts
2
Views
386
Activity
1w
DeviceActivityReportExtension sandbox blocks all output channels — how to export resolved Application.bundleIdentifier?
DeviceActivityReportExtension sandbox blocks all output channels — how to export resolved Application.bundleIdentifier? Application.bundleIdentifier only resolves to a non-nil value inside a DeviceActivityReportExtension (ExtensionKit/XPC). The main app and DeviceActivityMonitor extension always return nil. However, the Report Extension's sandbox silently blocks every output channel I've tested: UserDefaults (App Group): Reads succeed, writes silently dropped File writes (App Group container): Fail silently or throw HTTP requests: Network blocked entirely Local Notifications: "Couldn't communicate with a helper application" UIPasteboard: Writes silently fail iCloud KVS: synchronize() returns false Both targets share the same com.apple.security.application-groups entitlement and group identifier. The main app reads and writes to the shared container normally — only the extension's writes fail. This means resolved bundle identifiers can only be rendered in the extension's own SwiftUI view and cannot be communicated anywhere else. My question: Is this sandbox restriction intentional? If so, what is the recommended mechanism for the host app (or a backend) to obtain the resolved bundle identifiers that only the Report Extension can access? Environment: Xcode 16.3, iOS 18.3, physical device. Sample project: https://drive.google.com/file/d/1DPyN2BCUt5p-RKEPA0zsDFFEvgZVHlS_/view?usp=sharing — a minimal two-target project that demonstrates every failing channel. Run on a physical device, grant Screen Time access, select apps, and observe that bundle ID resolution shows PASS but all write channels show FAIL.
Replies
4
Boosts
0
Views
181
Activity
2w
Family Controls Request Form
Hi everyone, I recently submitted the Family Controls request form and received the following request IDs: 429MKWT5VX
 KNL6T2DC7A
 N62KV78DKC However, I haven’t received any updates yet and I’m not sure how these requests are tracked or when we’ll know if they’re approved. Our app is almost ready to launch and this capability is critical for us. Both the main app and an extension depend on Family Controls, so we’re currently blocked from moving forward. I also raised a support ticket with Apple Developer Support (Case ID: 102838723073), but I haven’t received any response there either. To be honest, this is becoming really stressful. Months of work are stuck at the final step and we’re unable to move forward without this approval. This isn’t just a small personal project and we’re building a production app and were hoping to launch very soon. If anyone has been through this process or has any guidance on the approval timeline, or if someone from Apple could help look into these request IDs, it would genuinely mean a lot to us.

 Thank you
Replies
4
Boosts
0
Views
622
Activity
1w
DeviceActivityMonitor extension rejected by App Store Connect validator — NSExtensionPointIdentifier "com.apple.deviceactivity.monitor" invalid (IrisAPI -19241)
Hi everyone, I'm building an iOS app that uses a DeviceActivityMonitor app extension as part of the Screen Time / Family Controls API. Every time I try to upload my IPA to App Store Connect, the validation fails with this error: "Invalid Info.plist value. The value of the NSExtensionPointIdentifier key, com.apple.deviceactivity.monitor, in the Info.plist of 'Alexandria.app/PlugIns/AlexandriaActivityMonitor.appex' is invalid." Error Domain=IrisAPI Code=-19241, iris-code=STATE_ERROR.VALIDATION_ERROR What I have verified (everything looks correct): NSExtensionPointIdentifier = com.apple.deviceactivity.monitor NSExtensionPrincipalClass = AlexandriaActivityMonitor.AlexandriaActivityMonitorExtension (correctly resolved in the compiled binary, verified with plutil -p) The Swift class correctly subclasses DeviceActivityMonitor CFBundleShortVersionString matches the main app Both the main app and extension provisioning profiles explicitly contain com.apple.developer.family-controls = true (verified by inspecting embedded.mobileprovision inside the IPA) The binary code signature itself contains com.apple.developer.family-controls = true (verified with codesign -d --entitlements :-) Family Controls entitlement was requested and approved in the Developer Portal for both App IDs Tested with both Xcode 26.2 (iOS 26 SDK) and Xcode 16.4 (iOS 18 SDK) — same error in both cases The IPA is structurally correct. The error comes purely from Apple's server-side IrisAPI validator and does not correspond to anything I can identify or fix in the code or configuration. Has anyone successfully submitted an app with a DeviceActivityMonitor extension to App Store Connect recently? Is there a backend approval requirement for com.apple.deviceactivity.monitor beyond the standard Family Controls entitlement approval? Could this be a known validator bug for this specific extension type? Any help appreciated.
Replies
4
Boosts
1
Views
179
Activity
21h
ShieldConfigurationExtension not working
I created a ShieldConfigurationExtension in Xcode 14.3 with File > New > Target > ShieldConfigurationExtension. This created the extension with all the necessary Info.plist values (correct NSExtensionPrincipalClass, etc.), with the extension included in embedded content in the host app target. No matter what I try, the extension is not getting invoked when I shield applications from my host app. The custom UI does not show as the shield, and looking at the debugger, an extension process is never invoked. I am shielding categories like this: let managedSettings = ManagedSettingsStore() ... managedSettings.shield.applicationCategories = .all() And my extension code overrides all the ShieldConfigurationDataSource functions. class ShieldConfigurationExtension: ShieldConfigurationDataSource { override func configuration(shielding application: Application) -> ShieldConfiguration { return ShieldConfiguration( backgroundBlurStyle: UIBlurEffect.Style.systemThickMaterial, backgroundColor: UIColor.white, icon: UIImage(systemName: "stopwatch"), title: ShieldConfiguration.Label(text: "You are in a Present Session", color: .yellow) ) } override func configuration(shielding application: Application, in category: ActivityCategory) -> ShieldConfiguration { return ShieldConfiguration( backgroundBlurStyle: UIBlurEffect.Style.systemThickMaterial, backgroundColor: UIColor.white, icon: UIImage(systemName: "stopwatch"), title: ShieldConfiguration.Label(text: "You are in a Present Session", color: .yellow) ) } override func configuration(shielding webDomain: WebDomain) -> ShieldConfiguration { return ShieldConfiguration( backgroundBlurStyle: UIBlurEffect.Style.systemThickMaterial, backgroundColor: UIColor.white, icon: UIImage(systemName: "stopwatch"), title: ShieldConfiguration.Label(text: "You are in a Present Session", color: .yellow) ) } override func configuration(shielding webDomain: WebDomain, in category: ActivityCategory) -> ShieldConfiguration { return ShieldConfiguration( backgroundBlurStyle: UIBlurEffect.Style.systemThickMaterial, backgroundColor: UIColor.white, icon: UIImage(systemName: "stopwatch"), title: ShieldConfiguration.Label(text: "You are in a Present Session", color: .yellow) ) } } What am I missing?
Replies
5
Boosts
2
Views
2.9k
Activity
Jun ’25
FamilyActivityPicker Crash on selecting some items
Both view and modifier versions of the FamilyActivityPicker crash randomly when selecting some items (usually the other option) throwing these in the console: [com.apple.FamilyControls.ActivityPickerExtension(1150.1)] Connection to plugin invalidated while in use AX Lookup problem - errorCode:1100 error:Permission denied portName:'com.apple.iphone.axserver' PID:22091 ( 0 AXRuntime 0x00000001c603b0fc _AXGetPortFromCache + 800 1 AXRuntime 0x00000001c603cce0 AXUIElementPerformFencedActionWithValue + 700 2 UIKit 0x0000000230de3ec8 DDE6E0C5-2AC3-3C73-8CFE-BC88DE35BB5F + 1453768 3 libdispatch.dylib 0x0000000103ef0b98 _dispatch_call_block_and_release + 32 4 libdispatch.dylib 0x0000000103ef27bc _dispatch_client_callout + 20 5 libdispatch.dylib 0x0000000103efa66c _dispatch_lane_serial_drain + 832 6 libdispatch.dylib 0x0000000103efb408 _dispatch_lane_invoke + 408 7 libdispatch.dylib 0x0000000103f08404 _dispatch_root_queue_drain_deferred_wlh + 328 8 libdispatch.dylib 0x0000000103f07a38 _dispatch_workloop_worker_thread + 444 9 libsystem_pthread.dylib 0x00000001f0824f20 _pthread_wqthread + 288 10 libsystem_pthread.dylib 0x00000001f0824fc0 start_wqthread + 8 ) This also happens in production apps like the Opal. The questions are: At least how to detect it to be able to manually reload the sheet (like what Opal does and shows an alert when this happens) How to prevent it in the first place? I really appreciate any help you can provide.
Replies
5
Boosts
2
Views
1.7k
Activity
Aug ’25
Summary of issues encountered with the Screen Time interface
I have developed three apps using the Screen Time API. The following are common problems I encountered in the three apps: DeviceActivityMonitorExtension is automatically killed after running for a few days (frequently) The same DeviceActivityEvent in DeviceActivityMonitorExtension is triggered twice during eventDidReachThreshold (especially obvious in iOS18.5) Screen Time authorization is automatically canceled for no reason (occasionally) I hope to get help
Replies
5
Boosts
2
Views
339
Activity
Jun ’25
Need com.apple.developer.managed-settings entitlement
Hello, I already have got approval from Apple for com.apple.developer.family-controls entitlement When I am building my app, there is one part where I need to check the list of applications which I have blocked with my app. To get the list I have to have com.apple.developer.managed-settings entitlement ... Now how and where show I get hold of it ? I already got permission for Family Control, how do I get hold of this now ?
Replies
5
Boosts
0
Views
220
Activity
Jul ’25
iOS 26.2 (23C55): DeviceActivity eventDidReachThreshold fires with 0 Screen Time minutes
On iOS 26.2 (23C55), DeviceActivityMonitor.eventDidReachThreshold fires intermittently for a daily schedule (00:00–23:59) even when iOS Screen Time shows 0 minutes for the selected apps that day. This causes premature shielding via ManagedSettings. Environment: iPhone 13 Pro Max, iOS 26.2 (23C55). Event selection: 2 apps. Threshold: 30 minutes. Multiple TestFlight users report the same behavior across various app selections and thresholds. Intermittent (~50% of days); sometimes multiple days in a row. Not observed in testing prior to iOS 26.2. Evidence: sysdiagnose + Screen Time screenshots (with 0 screen time on selected apps) + unified logs show UsageTrackingAgent notifying the extension that “unproductive from activity daily reached its threshold,” followed immediately by ManagedSettings shield being applied (extension reacting to the callback). Filed Feedback Assistant: FB21450954. Questions: Are others seeing this on 26.2? Does it correlate with restarting monitoring at interval boundaries or includesPastActivity settings?
Replies
5
Boosts
2
Views
973
Activity
3w
Changing Screen Time Passcode does not protect apps with Screen Time enabled
Hello, The purpose of "Screen Time Passcode" under Settings/Screen Time is to protect Screen Time preferences and it is asked every time the user updates Downtime, App Limits, Content & Privacy Restrictions and so on. But the private passcode is not requested if the user disables Screen Time for a particular app (only Face ID or phone passcode is requested, but not the private Screen Time passcode). I think this is a mistake, I think the purpose of a private Screen Time passcode is to protect all settings, including apps that use this API, right? Is there any solution to this? Thank you.
Replies
6
Boosts
4
Views
4.3k
Activity
May ’25
Open Parent App From ShieldActionDelegate
Hello, I’m building an app that helps people spend less time on social media apps. For that, I make heavy use of Apple’s Screen Time APIs, such as ManagedSettings and FamilyControls. When an app is locked using a ShieldConfiguration, the user has to open my app in order to unlock it (e.g. enter a code). This is very cumbersome because no documented API exists to open the parent app (=my app) from the ShieldActionDelegate (also part of my app) when the user presses a button of the ShieldConfiguration. The ShieldActionDelegate callback just offers three options in its ShieldActionResponse: .none .defer .close .openParentApp is missing. We are working around this limitation by sending a local push notification that the user has to tap on. This has multiple drawbacks: It has to be ensured that notification permission has been granted. It has to be ensured that notifications can be delivered even while focus is enabled. Features such as Apple Intelligence notification summaries and notification prioritization can heavily delay delivering notifications and thus frustrate the user. Neither my users nor myself do understand why this is not possible in a smoother way, at least according to the documentation. There are 3rd party apps that have such functionality, they can directly open their own app from a button press in the Shield, see here: https://apps.apple.com/us/app/applocker-passcode-lock-apps/id1132845904 It would be great if Apple could level the playfield for all developers and document how this is achievable, because technically it clearly is. Thanks a lot and have a great day!
Replies
6
Boosts
1
Views
720
Activity
Jul ’25
Family Controls entitlement request submitted on March 9, 2026 — no response or status update
Hi, I submitted a Family Controls (Distribution) entitlement request on March 9, 2026 for my iOS app, but I still have not received any approval, rejection, or other status update. At this point, I’m mainly trying to understand: whether this waiting time is currently normal, whether there is any way to check if the request is actually under review, and whether Apple provides any follow-up if more information is needed. This is blocking my progress, because the app depends on the Screen Time / Family Controls APIs. Has anyone recently experienced similar delays, and is there any recommended next step besides waiting? Thanks. Imi
Replies
6
Boosts
1
Views
443
Activity
1w
Family Controls Entitlement NOT applied to App Extensions (and Support Form is broken)
Hello, I am facing a critical issue where the Family Controls (Distribution) entitlement is not being applied to my app extensions, despite the main app ID being approved. Main App ID: com.hayashikento.focuspact (Approved on March 13) Extension ID 1: com.hayashikento.focuspact.ShieldActionExtension (Pending/Not visible) Extension ID 2: com.hayashikento.focuspact.ShieldConfigurationExtension (Pending/Not visible) I have submitted requests multiple times, but the entitlement does not appear in the "Capability Requests" for these extensions in the Certificates, Identifiers & Profiles portal. Furthermore, I am unable to contact Developer Support because the "Contact Us" form on the developer website consistently shows a "Request error" or freezes on the submission page. Since I am completely blocked from TestFlight distribution, could someone from Apple please look into my account (Team ID: UHG4J7F7NH) and manually sync these entitlements? Thank you for your help.
Replies
6
Boosts
0
Views
133
Activity
1w
ApplicationTokens changing
We persist ApplicationTokens in a storage container that ShieldConfigurationExtension has access to. In rare, cases all the ApplicationTokens for a user seem to change. We know this because the Application parameter passed into configuration(shielding application: Application) -> ShieldConfiguration function has a Token that does not match (using == ) any of the ones we are persisting in storage. Interestingly, the persisted ones still work, so I don't believe storage has gotten corrupted or anything. We can use them to add or remove shields, we can use them to display labels of the apps they represent, etc. But they don’t match what’s passed into the ShieldConfiguration extension. If the user goes into the FamilyPicker at this point and selects an app of a token that we are already persisting, the FamilyPickerSelection will have a token matching the new one that is passed into ShieldConfigurationExtension, not the one we persisted when they last selected that app. This leads me to believe the tokens are updated/rotated in some cases. When and why does this happen, and how can we handle it gracefully?
Replies
7
Boosts
4
Views
1.8k
Activity
Jul ’25
How to open parent app from `ShieldActionDelegate`
Hello, I think it is quite a common use-case to open the parent app that owns the ShieldActionDelegate when the user selects an action in the Shield. There are only three options available that we can do in response to an action: ShieldActionResponse.none ShieldActionResponse.close ShieldActionResponse.defer It would be great if this new one would be added as well: ShieldActionResponse.openParentApp While finding a workaround for now, the problem is that the ShieldActionDelegate is not a normal app extension. That means, normal tricks do not work to open the parent app from here. For example, UIApplication.shared.open(url) does not work because we can’t access UIApplication from the ShieldActionDelegate unfortunately. NSExtensionContext is also not available in the ShieldActionDelegate unfortunately, so that’s also not possible. There are apps however, that managed to find a workaround, in my research I stumbled across these two: https://apps.apple.com/de/app/applocker-passcode-lock-apps/id1132845904?l=en-GB https://apps.apple.com/us/app/app-lock/id6448239603 Please find a screen recording (gif) attached. Their workaround is 100% what I’m looking for, so there MUST be a way to do so that is compliant with the App Store guidelines (after all, the apps are available on the App Store!). I had documented my feature request more than 2 years ago in this radar as well: FB10393561
Replies
8
Boosts
3
Views
1.8k
Activity
Nov ’25
Issue with Universal Links and App Extension (ShieldAction Handler)
Issue with Universal Links and App Extension (ShieldAction Handler) I'm currently working on a POC app using the FamilyControls framework and facing an issue when trying to open a Universal Link from an app extension, specifically from a ShieldAction handler. When I try to open a Universal Link, I encounter the following error: Failed to open URL https://sixteen-server-c008110f8759.herokuapp.com/.well-known/apple-app-site-association: Error Domain=FBSOpenApplicationServiceErrorDomain Code=1 "The request to open 'com.apple.mobilesafari' failed." UserInfo={BSErrorCodeDescription=RequestDenied, NSUnderlyingError=0x14f2d90b0 {Error Domain=FBSOpenApplicationErrorDomain Code=3 "Application com.sixteen.life is neither visible nor entitled, so may not perform un-trusted user actions." UserInfo={BSErrorCodeDescription=Security, NSLocalizedFailureReason=Application com.sixteen.life is neither visible nor entitled, so may not perform un-trusted user actions.}} Context: I’m using a ShieldAction handler as part of an App Extension to trigger the action (e.g., "Break in Shield") in my app. The app extension (ShieldAction handler) is responsible for trying to open the Universal Link. I’m encountering the error because the app is not visible or entitled to perform this action, which seems to be related to security restrictions when using App Extensions. Questions: App Extension and Universal Link Interaction: Is it possible for an App Extension (like ShieldAction handler) to open a Universal Link or trigger an external app, such as Safari, even though it is not the foreground app? Entitlements for App Extensions: Are there any specific entitlements or permissions required to allow an app extension (ShieldAction handler) to open Universal Links or perform actions like opening Safari from the background? App Visibility and State: How can I ensure that my app is in the right state (visible/active) and has the necessary entitlements to trigger these actions when running in the context of an app extension? Workaround: If this behavior is restricted due to app extension limitations, what would be the recommended workaround to handle launching external apps (like Safari) or Universal Links from within an app extension?
Replies
9
Boosts
0
Views
474
Activity
Jul ’25
DeviceActivityMonitor is overcounting screen time for users on iOS 17.6.1
Our app uses a 24-hour DeviceActivityMonitor repeating schedule to send users notifications for every hour of screen time they spend on their phone per day. Notifications are sent from eventDidReachThreshold callbacks at 1, 2, 3, etc, hour thresholds to keep them aware of their screen time. We have recently received an influx of emails from our users that after updating to iOS 17.6.1 their DeviceActivityMonitor notifications are saying their screen time was much higher than what is shown in DeviceActivityReport and their device's Screen Time settings. These users have disabled "Share Across Devices" - but I suspect the DeviceActivityMonitor is still getting screen time from their other devices even though that setting is turned off. Has anybody else noticed this, understands what is causing this, or could recommend a fix that we can tell our users to do?
Replies
10
Boosts
9
Views
2.2k
Activity
Oct ’25
Guidance on implementing Declared Age Range API in response to Texas SB2420
I've spent the last few days researching the upcoming laws in Texas and other US states, and how these laws will impact on developers around the world. I want to share what I've learned so far with the community and get feedback on my current understanding. This post is not so much focused on a single API, but more of the bigger picture. Background The law essentially mandates that: (1) app store platforms implement age categorization and verification mechanisms, and (2) developers implement logic to listen to age categorization signals provided by the platform and respond accordingly. You can read the law itself here: https://capitol.texas.gov/tlodocs/89R/billtext/html/SB02420S.HTM Most people seem to be interpreting the law as follows: All developers who distribute apps in the USA are effectively required to implement the new APIs (required by Texas, not by Apple). The penalties are heavy, but it's unclear whether developers would actually be pursued and by whom (e.g. would someone seriously pursue an alarm clock app because it could be accessed by a minor?). Putting aside the ethical, privacy, and legal issues (and the damaging precedents this law sets), most people seem to agree that, from a technical perspective, this is a very silly way to implement age blocking (app store collects the info and passes it to dev, dev is responsible for blocking access). It would make way more sense for the platform to block the app directly for affected users (with optional API support for developers who wish to use it). However, I believe the law has specifically mandated that this is how they expect the system to work, so Apple's hands have been tied. Apple has basically complied with their obligations by providing the relevant APIs to developers. Because the law is vague and open-ended, there are a lot of legal and technical uncertainties about what developers actually need to do to be compliant. Understandably, Apple seems reticent to provide any guidance to developers that could be interpreted as legal advice. Apple's docs simply describe what the APIs do with no guidance on what the overall flow is meant to look like or how and when the APIs should actually be used in practice. Americans familiar with the political situation seem to think there's the possibility of an injunction before this law goes into effect, but that looks increasingly unlikely given that it's two weeks away. Developer solutions Many devs seem to be exploring two main workarounds, at least as temporary solutions: (1) Raise your app's rating to 18+. Putting aside the fact that Texas law would effectively be forcing developers to raise their global age rating (resulting in lost revenue that extends far beyond Texas), it remains unclear whether this solution is actually legally compliant, since the law specifically mandates that apps must implement logic to respond to signals from the platform. (2) Geo-block Texas. Again, it remains unclear if this is compliant because geo-blocking is not 100% accurate and it doesn't actually do what the law says you have to do. It also creates issues if you already have users in Texas, and it means performing additional privacy-hostile checks (i.e., detecting the user's location, even users who are not subject to the law). The DeclaredAgeRange API is actually pretty straight-forward to use – although there is still a lack of documentation on certain edge cases and it's difficult to test. In addition, the new APIs are only available in iOS 26.2, so it's unclear what you need to do if you're still supporting < iOS 26.2. Some people are of the opinion that developers can only reasonably respond to the signals that are available, thus pushing responsibility back to the platforms in regards to earlier OS versions. The API provides a bool (AgeRangeService.shared.isEligibleForAgeFeatures), which allows you to determine if the user is someone to whom age checks need to be applied. https://developer.apple.com/documentation/declaredagerange/agerangeservice/iseligibleforagefeatures I'm not 100% sure, but perhaps the simplest action you can take is to check this bool on launch and block access if it's true. In any case, it looks like this API will be very useful because it means we can avoid applying the checks in other jurisdictions and for grandfathered-in users without needing to implement custom geo-tracking code (albeit only in iOS 26.2+). To implement the API, my current thinking is that, on every launch, I should first check the above bool and, if it's true, do the following: (1) get the App Store age rating with let appStoreAgeRating = await AppStore.ageRatingCode ?? 18, (2) request the user's age with let ageRangeResponse = try await AgeRangeService.shared.requestAgeRange(ageGates: appStoreAgeRating), (3) check that the user has agreed to share their age, (4) check that lowerBound >= appStoreAgeRating, and (5) check that the verification method is not one of the self-declared methods. If this procedure fails, I should block access to the app and provide a link to Apple's support page: https://support.apple.com/en-us/122770 I stress, however, that this is just my current idea and there are some edge cases I'm unsure about. Other issues It is possible to do some basic testing of the API, but only using a sandbox App Store account on a physical device. From the Developer section in iOS Settings, you can select from a few different scenarios, like "Texas user aged 14 without parental consent", etc. There's also a whole separate aspect to this law relating to "significant updates". Everyone seems kinda confused about this, but it seems like the general idea is that, if your app's age classification changes in the future, the app should be responsive to that change. My current interpretation is that if I use the AppStore.ageRatingCode as the age gate (as described above) then that should allow me to comply, but I haven't really looked into this aspect of the law yet. There's also another aspect to this law requiring developers to revoke access to the app when requested by the parent. I have not looked into this yet, but as noted above, it doesn't make sense to me why this is the developer's responsibility given that the platforms already provide solid parental controls. Do I need to something else in addition to what I've sketched out above? It goes without saying, of course, that everything above is not legal advice, and I still have some gaps in my understanding. I would really appreciate any feedback on the above, perhaps with recommendations about better ways to approach this.
Replies
10
Boosts
1
Views
1.5k
Activity
Jan ’26
DeviceActivityReportExtension: NSExtensionPrincipalClass required by App Store but rejected at runtime
I'm experiencing a contradictory validation issue with DeviceActivityReportExtension that creates an impossible situation: The Problem: Without NSExtensionPrincipalClass in Info.plist → App Store Connect rejects upload with: "Missing Info.plist values. No values for NSExtensionMainStoryboard or NSExtensionPrincipalClass found" With NSExtensionPrincipalClass → Local install fails with: "defines either an NSExtensionMainStoryboard or NSExtensionPrincipalClass key, which is not allowed for the extension point com.apple.deviceactivityui.report-extension" Setup: Extension point: com.apple.deviceactivityui.report-extension Using SwiftUI with @main attribute and DeviceActivityReportExtension protocol Xcode 16.2, iOS 17.6 deployment target Code structure: @main struct SpoolReport: DeviceActivityReportExtension { var body: some DeviceActivityReportScene { // Report scenes here } } The extension builds and runs perfectly without NSExtensionPrincipalClass, but cannot be uploaded to App Store Connect. Adding the key allows upload but breaks local installation. Is this a known issue? Is there a workaround or correct Info.plist configuration for DeviceActivityReportExtension? Thank you!
Replies
10
Boosts
2
Views
645
Activity
3w