I made a payment for the development program on the 5th of May, got the receipt and everything. But I’m still not enrolled.

I have an orphaned asset folder taking up 9.13GB located at: /System/Library/AssetsV2/com_apple_MobileAsset_iOSSimulatorRuntime/c0d3fd05106683ba0b3680d4d1afec65f098d700.asset It contains SimulatorRuntimeAsset version 18.5 (Build 22F77). Active Version: My current Xcode setup is using version 26.2 (Build 23C54). I checked the plist files in the directory and found what seems to be the cause of the issue: The "Never Collected" Flag: The Info.plist inside the orphaned asset folder explicitly sets the garbage collection behavior to "NeverCollected": <key>__AssetDefaultGarbageCollectionBehavior</key> <string>NeverCollected</string> The Catalog Mismatch: The master catalog file (com_apple_MobileAsset_iOSSimulatorRuntime.xml) in the parent directory only lists the new version (26.2). Because the old version (18.5) is missing from this XML, Xcode and mobileassetd seem to have lost track of it entirely. What I Have Tried (All Failed) Xcode Components: The version 18.5 does not appear in Settings -> Components, so I cannot delete it via the GUI. Simctl: xcrun simctl list runtimes does not list this version. Running xcrun simctl runtime delete 22F77 fails with: "No runtime disk images or bundles found matching '22F77'." Manual Deletion: sudo rm -rf [path] fails with "Operation not permitted", presumably because /System/Library/AssetsV2 is SIP-protected. Third-party Tools: Apps like DevCleaner do not detect this runtime (likely because they only scan ~/Library or /Library, not /System/Library). Has anyone found a way to force the system (perhaps via mobileassetd or a specific xcrun flag) to re-evaluate this folder and respect a deletion request? I am trying to avoid booting into Recovery Mode just to delete a cache file. Any insights on how AssetsV2 handles these "orphaned" files would be appreciated.

Hey everyone. This is probably the last straw I am trying to pull since I tried almost everything else. I have applied for the Apple Developer Program and the whole process started at the end of 2024. I got rejected the first time because Apple could not charge my card. It was clearly shown that the cost is $99, however, it was 106.65 Euros (I created a Revolut card with the $100 because I don't trust placing my card everywhere). I started the new process but this time I knew about the amount issue so I placed 150 Euros just to be safe. Automatic rejection with robotic AI response: "For one or more reasons, your enrollment in the Apple Developer Program couldn't be completed. We can't continue with your enrollment at this time." When I raised ticket about it I got no replies. Than both my friend and wife tried to apply for the program. Both rejected with the exact same messaging. I created a new Apple ID, new card, new everything and did everything "by the book". Again. Rejection with the same exact messaging: For one or more reasons, your enrollment in the Apple Developer Program couldn't be completed. We can't continue with your enrollment at this time... Can someone from Apple please tell me what are those reasons? I have been an Apple user for almost 10 years now. I was buying Apps from store. I am using iCloud+. Modest Citizen as some would say. What's the problem? How can I finally get to Apple Developer Program without being rejected by AI or some poor auto system?

I have a question concerning Xcode version 26. Ever since I installed this version on my Mac, I have been experiencing issues with the StoreKit configuration file. The Simulated StoreKit Failures check boxes and selections are all grayed out. Once in a while, I see a pop-up stating "The document 'TaConfig.storekit' could not be autosaved. The file has been changed by another application. The pop-up Save as... points to where my config file is located, but the config file is grayed out. I thought maybe the directory where the file is located is write protected, but I have been able to save other files to the same directory. The Edit Scheme... -> Run -> Options has the StoreKit Configuration set for my file TaConfig.storekit. It feels like there is an option somewhere that I'm missing.

Hello, I am trying to enroll in the Apple Developer Program, but the enrollment process consistently fails inside the official Apple Developer app on macOS. Issue After signing in successfully and clicking “Continue Your Enrollment”, the app immediately shows: “Unable to Continue. Contact support at https://developer.apple.com/contact/” The issue occurs repeatedly for last 4 months and prevents me from completing enrollment entirely. Environment Country: India Enrollment Type: Organisation Device: MacBook macOS Version: macOS 26.4.1 Apple Developer App: Latest available version Apple ID signed in correctly on macOS System Settings What I Already Tried Signed out and signed back into Apple ID Reinstalled the Apple Developer app Restarted the Mac Tried different internet connections Verified payment/account region settings Attempted enrollment multiple times across different days The same error continues. Support Case I contacted Apple Developer Support multiple times over last 4 months and latest , they asked to provide: Screen recording Device details SEID Identification documents Apple Account details Timestamp of occurrence All requested information was uploaded and submitted approximately two weeks ago. Current case reference: Case Number: 1...9 Despite providing all requested verification materials and troubleshooting information, Apple Developer Support later responded that my enrollment "could not be completed" and effectively closed the case without providing a clear explanation, actionable resolution, or escalation path. Business Impact Our months of works are in stake as this issue is currently blocking: Apple Developer Program enrollment App Store distribution TestFlight testing iOS release preparation for my application Request Has anyone else faced this exact "Unable to Continue" enrollment error in the Apple Developer app? If any Apple staff or moderators are reviewing this forum, I would appreciate escalation or guidance on how to move this case forward, since standard support troubleshooting has already been completed. Thank you.

I have started to have issues with SwiftUI previews of iOS apps with projects under the Documents folder. I have experimented that in Xcode 26.4 and I am still seeing it in 26.5. The error is: Cannot preview in this file. Failed to launch xyz.abc.TestApp Looking at the diagnostics, Xcode gets a permission denied error when trying to open /Users/me/Documents/path/to/TestApp/DerivedData/TestApp/Build/Intermediates.noindex/TestApp.build/Debug-iphonesimulator/TestApp.build/Objects-normal/arm64/ContentView.1.preview-thunk-launch.o Error details below. Note that I have set DerivedData folders relative to the projects' roots. Additional information: I get errors on freshly created iOS projects, just trying to preview the default ContentView. Xcode has full disk access set in System Preferences > Privacy & Security. I have cleaned build folders, deleted the simulators, Xcode itself, cleared various caches, restarted and reinstalled Xcode to no avail. Checking Editor > Canvas > Use Legacy Previews Execution did not fix it either. Apps run fine in Simulator. System info: macOS 26.4.1, Xcode 26.5 (17F42), MacBook Pro M1 and Mac Studio M2 Max. I have found two ways to fix the problem while keeping DerivedData relative to the project's root: create the project in some other “unprotected” directory (/Users/me/Developer in my case), or uncheck Editor > Canvas > Automatically Refresh Canvas. Either way makes previews work again. Possibly related: SwiftUI preview not working in Xcode 26 when “Automatically Refresh Canvas” is enabled Xcode 13.2.1 - Simulator works, Preview doesn't Excerpt from diagnostics: | | [Remote] JITError | | | | ================================== | | | | | [Remote] CouldNotLoadInputObjectFile: Could not load object file during preview: /Users/me/Documents/TestApp/DerivedData/TestApp/Build/Intermediates.noindex/TestApp.build/Debug-iphonesimulator/TestApp.build/Objects-normal/arm64/ContentView.1.preview-thunk-launch.o | | | | | | path: /Users/me/Documents/TestApp/DerivedData/TestApp/Build/Intermediates.noindex/TestApp.build/Debug-iphonesimulator/TestApp.build/Objects-normal/arm64/ContentView.1.preview-thunk-launch.o | | | | | | ================================== | | | | | | | [Remote] XOJITError | | | | | | | | XOJITError: '/Users/me/Documents/TestApp/DerivedData/TestApp/Build/Intermediates.noindex/TestApp.build/Debug-iphonesimulator/TestApp.build/Objects-normal/arm64/ContentView.1.preview-thunk-launch.o': Operation not permitted

Hi everyon. I‘d like to ask If there’s a way of including info.plist into swift playground on the iPad. I’m currently developing a daw on the iPad, I can see and use Apple’s auv3 plugins but can’t see third party apps like fab filter etc installed on the iPad. I think it’s needs inter app or auv3 entitlement. Is there a work around? I have attached my code for auv3 section. if anyone is interested , here is a video of my progress so far https://youtu.be/_2-L3oowfd0?si=cbr_9vYc3DOXV3R1 AUV3Diagnostic.swift

Hello, I am seeking assistance regarding my organization's enrollment. My enrollment ID is DAJ7B62DSR. After providing all requested documents (Government ID, Articles of Incorporation, and EIN), my case was recently escalated to an internal team (Case: 102888036786). However, we are facing significant delays in launching our financial services app. Could an Apple representative please look into this or provide guidance on how to expedite the final review? We have strictly followed all D-U-N-S and legal requirements. Thank you.

I tried every possible but it just won't work on my device. The program runs well on the simulator by the way

I have been attempting to contact development support regarding verification of my organization in my signing ability on behalf of my organization because my account has not been. My initial filing was on May 5 for my new reference number because my first one got declined the developer portal as that it should only take two business days, but it is definitely taking a lot longer than that to verify my business. has anybody had this sort of issue before and is there a phone number to actually contact because the email process also seems to be delayed at this point in time. I work full-time and cannot receive phone calls during the day so putting in a ticket for someone to call me is not feasible. Hopefully somebody from the sports team will see this post and reach out to me and give me a way to contact Apple development support so I can get this finalized.

Hello, I am attempting to enroll in the Apple Developer Program as an Organization. During the email verification step, I encountered a technical error: no verification code was sent to my email (I confirmed the email address was correct and checked all folders). There was no "Resend" button available on the screen. After refreshing the page to try and fix the UI glitch, I was immediately blocked with the following error: "Contact us to continue your enrollment. You’ve exceeded the maximum number of attempts. Please contact us." I have already opened a support ticket (Case ID: 102824565622), but since this is a time-sensitive corporate enrollment, I am looking for advice. Any help from the community or an Apple representative would be greatly appreciated. Thanks in advance, Yoni

We have submitted an enrollment request and cannot see the status. I cannot submit a support ticket as it is throwing a javascript exception. Unable to contact support or view status. Enrollment ID is F5T6HL5534

My Apple Developer Program enrolment been pending since April 2026. I have received no response from Apple since around 2 weeks. I have also contacted support last week but received no response from them as well. I had initially submitted by identity/company verification documents 2 weeks back. However, I still kept getting weekly reminders to upload documents. I have now uploaded the documents for the second time as after the first time I did not receive any confirmation for the submission. I am unable to request for call/phone support. My enrollment ID: QDH59Y57T7 My Case ID: 102887512171 Is there anything else I need to provide? Has anyone else encountered this problem? And what should I do? Thank you.

On my Apple Developer Account, all I see is "Your enrollment is being processed. Your enrollment ID is JYD86Q79DM." This has been ongoing for almost a week now. This is the first time I am enrolling to the program and need to know how much time it takes and if I am missing any steps? Please advise

The epic saga of registering an Apple Developer Account for my company seems to have been successfully resolved. The full story can be read here My account has been approved, I've paid the membership fee, and everything appears to be in order. Huge thanks to everyone, especially the Apple staff members who didn't stay indifferent and went out of their way to help. Current status: My developer account is active. I can sign in to https://developer.apple.com/account and see that everything looks fine - there are no pending actions on my side (no agreements to sign, etc.), and the account appears completely normal. However, when I try to sign in to App Store Connect, I get the following error: To access App Store Connect, you must be an individual or team member in the Apple Developer Program, or invited by an individual to access their content in App Store Connect. (https://appstoreconnect.apple.com/login?errorKey=ITC.signin.error.invalidUser.asc) I'm attaching a screenshot. What I've already tried: Clearing browser cache, trying different browsers and devices, and waiting for some time — none of this helped. On May 9, I submitted a support request (Case ID: 20000112974233), but I still haven't received a response. My guess is that my account may have exhausted its Apple Developer Support request limit, since during the original issue I sent dozens of messages and may have used up my quota. This is just a hypothesis, but if I'm right, I would be very grateful if my ability to receive Apple Developer Support could be restored. Thank you in advance. For reference: similar case: I also did some research and found that another forum user had the same issue, which was resolved through Apple Developer Support (hopefully this helps point in the right direction): https://discussions.apple.com/thread/255265181 Thanks in advance for any help!

Hello, I would like to have MSAL login fully working in a Developer ID signed macOS application. I am using the following library for adding MSAL support to my macOS app : https://github.com/AzureAD/microsoft-authentication-library-for-objc . The MSAL login (even silent login via the MSAL broker) works fully via my company Entra ID when I run and test my local dev build. But : when I build and sign and notarize my application with a company Developer ID signature, the login fails, and I see keychain access related issues in the MSAL library log entries. The MSAL library requires the following keychain access groups to be enabled : $(AppIdentifierPrefix)com.company.app.bundle.id $(AppIdentifierPrefix)com.microsoft.identity.universalstorage The above requirement is confirmed under these links: https://learn.microsoft.com/en-us/entra/msal/objc/howto-v2-keychain-objc?tabs=objc and also their sample app : https://github.com/AzureAD/microsoft-authentication-library-for-objc/blob/410256714ee0489d212c0cbd8772259a69e7d862/MSAL/test/app/mac/MSALMacTestApp.entitlements#L18 The problem seems to be that such keychain access groups access cannot be configured for Developer ID signed applications. Would it be possible to enable such Keychain Access groups somehow for a Developer ID signed application? Thank you for any help in advance!

(Note: I don't need DTS support. This is not a DTS issue, and the standard responses aren't relevant to the situation. I would ask that DTS not respond in lieu of the developer support official) Yesterday, a poster in this forum wrote about his experience waiting several months to get approved to have his apps notarized. He had hit the "status code 7000; Team ID not configured for notarization" block. An Apple Developer Support account responded to him saying they would help the poster. After a month of waiting and praying for Developer Support to approve my Team ID for notarization, and no progress via the official channels, I am rolling the dice that asking Developer Support here will get my account approved or at least moved forward. I just can't wrap my head around why it takes so long to allow a Team ID to submit apps for notarization. My Team ID is V67NRZ84A2, and my support ticket is 102874600970. Spending months and months developing an app, paying the Developer Support annual fee, and then having to sit on your hands for months while your app gathers dust due to the Status Code 7000 bottleneck is very demoralizing. Again, not a DTS issue. The official channels 100% do not work. Developer Support did respond to a poster yesterday, so this is the pathway I'm hoping will lead to my Team ID getting permission to notarize apps. As it stands, no other method is leading to the problem getting resolved.

After my account was converted to an organizational account, I tried to submit a new W-9, but I get an error: "The Type of Beneficial Owner does not match the individual or company status you previously provided." I had selected "Individual/Sole proprietor", based on my understanding that this is what should be selected on the W-9 for a single-member LLC. My initial guess as to what's causing the error, is my single-member LLC may have been miscategorized in the migration to an organization account so the intended option doesn't work. As per the official W-9 instructions, a single-member LLC should be categorized as an "Individual/sole proprietor or single-member LLC" on the form for tax purposes, but when I select "Individual/Sole Proprietor" on the "Type of Beneficiary Owner" dropdown on the App Store Connect front-end form for the W-9, which I assume corresponds with the aforementioned option on the true W-9 form that includes "single-member LLC", I get the aforementioned error. I was alternatively informed by Developer Support that the above error may be occurring because I haven't signed the latest Apple Program License Agreement, which I haven't been able to access, which they claimed is because I hadn't provided banking information for my account. So I added my business bank account but a week later the top of the Business section still says "Your banking updates are processing, and you should see the changes in 24 hours. You won't be able to make any additional updates until then." I contacted Apple Developer Support about all of the above and am still waiting for a response. While I wait, I'd like to ask here whether anyone has any ideas as to why the W-9 error is occuring or how long banking changes actually take to process, in case either of these is something I can resolve in the meantime.

Since a few days ago, I noticed that every time you go to the top of the text in the Agentic Coding chat box, if you keep pressing the up arrow, the current message is replaced by the previous one. It's like someone decided to allow users to use the arrows to navigate to previous conversations in the same context, but this means that you are constantly jumping to previous messages by accident. The "feature" is error prone, confusing, and extremely annoying. If someone knows of an option in setting to disable it, please let me know. I'm constantly making mistakes, wasting tokens, editing the wrong message, and making the conversation confusing by sending the wrong message to the agent.

I submitted my paperwork on May 5 to development support to verify my organization and my signing ability for my organization and I have not heard anything back to this day. I know that these things are supposed to only take two business days. So I’ve also emailed and have not heard back. Has anybody ever had these issues before? And is there a way to contact Apple that’s not requesting a phone call I work full-time and cannot receive phone calls while I’m at work so that’s not a feasible option for me. Hopefully somebody will see this from support and respond to my emails and or submission.