Rosetta 2 Deadlock on M4 Pro January 2026 Blizzard update causes a deadlock in Rosetta 2 on M4 chips. CodeWeavers (the developer of CrossOver) has analyzed the issue and identified it as a Rosetta translation failure, not a CrossOver application-level bug. Hardware: M4 Pro Mac Book Pro System: Tahoe 26.2 Impacted Software: CrossOver 25.1.1 Diablo II: Resurrected

Hello, I have noticed a performance drop on SpriteKit-based projects running on iOS 26.0 (23A341). Below is a SpriteKit scene used to test framerate on different devices: import SpriteKit import SwiftUI class BareboneScene: SKScene { override func didMove(to view: SKView) { size = view.bounds.size anchorPoint = CGPoint(x: 0.5, y: 0.5) backgroundColor = .darkGray let roundedSquare = SKShapeNode(rectOf: CGSize(width: 150, height: 75), cornerRadius: 12) roundedSquare.fillColor = .systemRed roundedSquare.strokeColor = .black roundedSquare.lineWidth = 3 addChild(roundedSquare) let action = SKAction.rotate(byAngle: .pi, duration: 1) roundedSquare.run(.repeatForever(action)) } } struct BareboneSceneView: View { var body: some View { SpriteView( scene: BareboneScene(), debugOptions: [.showsFPS] ) .ignoresSafeArea() } } #Preview { BareboneSceneView() } The scene is very simple, yet framerate drops to ~40 fps as shown by the Metal HUD. Tested on: iPhone 13, iOS 26.0: framerate drops to 40 fps. Sometimes it runs at near 60fps. But if the screen is touched repeatedly, the framerate drops to 40-50 fps again. iPhone 11 Pro, iOS 26.0: ~40fps. iPad 9th Gen, iOS 18.6.2: 60fps, no issues. See screenshots attached. These numbers were observed by me and members of our beloved SpriteKit Discord server. Thank you for your attention.

I've had no issue calling image files in my .swift files, but they are causing crashes when used in my .SKS files. When I set a sprite texture to an image in the inspector/ editor bar, at runtime when that sprite is being called I get the error: "Cannot get value with size 16. The type encoded as {CGRect={CGPoint=dd}{CGSize=dd}} is expected to be 32 bytes." From my research it has something to do with Apple switching from 32 to 64 bite machines. From chatGPT “SpriteKit under the hood uses NSKeyedUnarchiver to load your .sks file. That unarchiver decodes each archived property by reading a fixed‑size blob of bytes and mapping it into a C struct. In your case it ran into a mismatch”. I am using a 64-bite machine to write my code and 64-bite simulators and physical devices, so there isn't a clear cause of the mismatch. My scenes play fine in Xcode 16's preview window and my code builds, it just crashes at runtime. When I don’t use image textured assets in the SKS file it works fine. It loads animated labels, and plain color squares. I’ve been able to work around this for static things like a sprite with a background texture by. in a normal non-game swift file, writing code like: if let scene = SKScene(fileNamed: "GameScene2") { let bg = SKSpriteNode(imageNamed: "YourBackgroundImage") bg.position = CGPoint(x: scene.frame.midX, y: scene.frame.midY) bg.zPosition = -1 scene.addChild(bg) } The issue now is I want to make a particle emitter and other non static sprites, but my understanding of their properities isn’t deep enough to create them without the editor. Also when I set SKTexture in a swift file that causes the same runtime crash with the 16/32 error. Could you help me figure out how to fix the bug so I can use the editor again? Otherwise could you help me figure out how to write a workaround like I do for background images? I have a feeling the answer is in writing my own NSKeyedUnarchiver but I don’t know how to make sure it’s called instead of the default one. I've already tried cleaning my code multiple times and deleting and reading sprite nodes. Thank you.

I'm an experienced SceneKit developer and I want to begin work on a new project using RealityKit. So I appreciated as timely, the WWDC 2025 Session, "Bring your SceneKit project to RealityKit". However, now I am finding that: Blender does not properly support exporting armatures in usdc files, and usdc is really the only file format that should be used for creating 3D assets for RealityKit. The option of exporting from Blender to fbx or some other intermediate format, and then converting that to usdc, is a challenge. Apple's Reality Converter App, which supposedly can support importing and converting fbx files to usdc, is no longer available from Apple's website. And an older copy of it I found at the Kodeco website requires Rosetta on Apple Silicon. As well, this older copy does not in fact import fbx or anything else - I find it doesn't work at all. Apple's Reality Composer Pro, at least as far as I can tell, only supports importing usdc - it is not a file conversion tool. Alternatively, I am under the impression that Maya supports producing usdc files with armatures, but Maya costs over $2000 per year and I am skilled with Blender, so I believe strongly that I should be able to continue with Blender. Maya's expense and skillset simply shouldn't be a requirement for building RealityKit applications. What are my options then, if any, to produce assets with armatures and armature based animations using Blender, and then bring them into RealityKit?

I am new to RealityKit and Metal and I am building a RealityKit app that renders a procedural LowLevelMesh road. But the left and right side of the road is a complete green terrain mesh object and it doesn't look great. What I want is to add some rocks, tall trees and dence bushes (or weed) to make it look like the player is in the woods. But when I add many of those objects then the performance drains. What is the best approach to fill background empty spaces in the scene?

Hey all — I’ve been building out my first set of Game Center Achievements for a game I’m working on, and I’ve run into something odd with the image quality. The specs say to upload icons at 512x512 or 1024x1024@2x. I’ve been uploading 1024x1024 PNGs (without explicitly naming them “@2x” since there’s only one upload slot), assuming that Game Center would just handle the scaling automatically — kind of like how a lot of things are getting more streamlined across platforms lately. But in testing, the icons are showing up a bit blurry, especially in the Game Center interface. It’s not horrible, but it’s definitely softer than I expected — more like low-res than Retina. All my test devices (outside the Simulator) are running iOS 26, so I’m also wondering if this might be a beta-related display bug? Has anyone else run into this? Curious if I’m missing a best practice here, or if I really do need to ensure I’m uploading it with the @2x suffix, or maybe something else entirely? Thanks!

Hello, **I'm Using ** Unity 6 LTS Unity Apple GameKit + Core plugins Turn-based matchmaking interface w/ 2 players max App Store Connect API for rule-based matchmaking I have already enabled game center in app store connect (I think) authenticated players and matched via friend request I am stuck Using queues to match players automatically I'm working on a rule-based matchmaking system which aims to place two players against each other into a GKTurnBasedMatch. I have a simple Unity Project that correctly authenticates a user and proceeds to send a matchmaking request. The matchmaking script utilizes the Unity plugins' GKTurnBasedMatchmakerViewController.Request(...) request function with a GKMatchRequest.Init() request configured with a QueueName equal to the App Store Connect API Queue I created. The queue I created is also linked to a ruleset with a very basic rule that checks if the properties contains a key called 'preference' that contains a string value for what side the player wants to play for this match. If during the matchmaking, the preferences between players are different, then the match is made and both players should join the match; each player gets to play the side they have chosen. I have my rule expression designed to just check if the preferences are not equal: requests[0].properties.faction_preference != requests[1].properties.faction_preference When I launch the game with two physical iPads and begin the matchmaking request, each player is immediately presented with two options: Invite a friend, or Start game The Problem: Inviting a friend works to get two players into a game, but queue seems to not matter, and clicking start game will just put the current player into its own match (no one joins). The Question: How do I get queue based matchmaking to work in Unity for a Turn-based match with only two players who are able to select the enemy side they want to play dictated by a rule that compares enemy play-side preferences? Resources I've used: Apple Unity GameKit Plugin: https://github.com/apple/unityplugins Matchmaking: https://developer.apple.com/documentation/gamekit/matchmaking-rules Multiplayer rulesets: https://developer.apple.com/documentation/gamekit/finding-players-using-matchmaking-rules

Hi, Since iOS 26 introduced the new Games app, I’ve noticed a problem when using a Nintendo Switch Pro Controller in wired USB-C mode, and also with third-party controllers that emulate it (like the GameSir X5 Lite). In the Games app interface, only the L/R buttons respond, but the D-Pad and analog sticks don’t work at all. Once inside actual games, the controller works fine — the issue only affects the Games app UI. What I’ve tested so far: Xbox / PlayStation controllers → work fine in both wired and Bluetooth, including inside the Games app. Switch Pro Controller (Bluetooth) → works fine, including in the Games app. Switch Pro Controller (wired) → same issue as the X5 Lite, D-Pad and sticks don’t work in the Games app. This makes it hard to use the new Games app launcher with these controllers, even though they work perfectly once a game is launched. My question: is this an iOS bug (Apple needs to add proper support for wired Switch Pro controllers in the Games app), or something that Nintendo / GameSir would need to address? Thanks in advance to anyone who can confirm this or provide more info.

I'm updating our app to support metal 4, but the metal 4 types don't seem to get recognized when targeting simulator. Is it known if metal 4 will be supported in the near future, or am I setting up the app wrong?

The CGSetDisplayTransferByTable() is not working on the latest round of Mac hardware, namely the MacBook Neo (external display), MacBook M5 Pro (both built-in and external display) and possibly the M5 Max. All tested apps (BetterDisplay, MonitorControl, f.lux, Lunar) exhibit the very issue both in macOS Tahoe 26.3 and macOS Tahoe 26.4 RC. Tested on multiple Macs and installations on the MacBook Neo and MacBook M5 Pro. This issue breaks several display related macOS apps. Way to reproduce the issue using an affected app: Install the app BetterDisplay (https://betterdisplay.pro) Launch the app, open the app menu, choose Image Adjustments and try to adjust colors. Adjustments take no effect Way to reproduce the issue programmatically: Attempt to use the affected macOS API feature: https://developer.apple.com/documentation/coregraphics/cgsetdisplaytransferbytable(::::_:) Here are the FB numbers: FB22273730 (Filed this one as a developer on an unaffected MBP M3 Max) FB22273782 (Filed from an affected MBP M5 Pro running 26.4 RC, with debug info attached)

Explanation Currently, D3DMetal’s GPU synchronization approach introduces significant compute overhead on the CPU. This specifically affects D3D12 games that use modern rendering pipelines on Apple Silicon. Specifically, I’ve tested Death Stranding 2 On the Beach for how it handles its rendering. And the results are extreme: frame times are suffering from a 42% decrease from synchronization. Although there are obviously other effects at play, such as the overhead introduced by Rosetta and Wine, both of them don’t introduce as much overhead as D3DMetal. This issue isn’t just specific to Death Stranding 2 On the Beach; most games running through D3DMetal suffer from this. Most games still seem to force synchronization to ~30 ms to reach the 30 fps amount. But it could be better with better synchronization, such as how DXMT handles it. Instead of doubling the work, it allows Metal to single-handedly track resource dependencies internally. This is in part due to the unfortunate bad mapping of D3D12 calls onto shared logic between D3D11 and D3D12. System M2 Max Mac Studio — 32 GBs — 30-core GPU macOS 26.4 Tahoe CrossOver 26.1 RC Death Stranding 2 On the Beach — Steam Assassin’s Creed Valhalla — Steam & Ubisoft Connect Thank you for your commitment. Another game that I recommend testing to really see this swell is Assassin’s Creed Valhalla. Feedback FB22426600 - D3DMetal Extereme Over Syncranization Issues

I'm having a heck of a time getting this to work. I'm trying to add an event notification at the end of a timeline animation to trigger something in code but I'm not receiving the notification from RC Pro. I've watched that Compose Interactive 3D Content video quite a few times now and have tried many different ways. RC Pro has the correct ID names on the notifications. I'm not a programmer at all. Just a lowly 3D artist. Here is my code... import SwiftUI import RealityKit import RealityKitContent extension Notification.Name { static let button1Pressed = Notification.Name("button1pressed") static let button2Pressed = Notification.Name("button2pressed") static let button3Pressed = Notification.Name("button3pressed") } struct MainButtons: View { @State private var transitionToNextSceneForButton1 = false @State private var transitionToNextSceneForButton2 = false @State private var transitionToNextSceneForButton3 = false @Environment(AppModel.self) var appModel @Environment(\.dismissWindow) var dismissWindow // Notification publishers for each button private let button1PressedReceived = NotificationCenter.default.publisher(for: .button1Pressed) private let button2PressedReceived = NotificationCenter.default.publisher(for: .button2Pressed) private let button3PressedReceived = NotificationCenter.default.publisher(for: .button3Pressed) var body: some View { ZStack { RealityView { content in // Load your RC Pro scene that contains the 3D buttons. if let immersiveContentEntity = try? await Entity(named: "MainButtons", in: realityKitContentBundle) { content.add(immersiveContentEntity) } } // Optionally attach a gesture if you want to debug a generic tap: .gesture( TapGesture().targetedToAnyEntity().onEnded { value in print("3D Object tapped") _ = value.entity.applyTapForBehaviors() // Do not post a test notification here—rely on RC Pro timeline events. } ) } .onAppear { dismissWindow(id: "main") // Remove any test notification posting code. } // Listen for distinct button notifications. .onReceive(button1PressedReceived) { (output) in print("Button 1 pressed notification received") transitionToNextSceneForButton1 = true } .onReceive(button2PressedReceived.receive(on: DispatchQueue.main)) { _ in print("Button 2 pressed notification received") transitionToNextSceneForButton2 = true } .onReceive(button3PressedReceived.receive(on: DispatchQueue.main)) { _ in print("Button 3 pressed notification received") transitionToNextSceneForButton3 = true } // Present next scenes for each button as needed. For example, for button 1: .fullScreenCover(isPresented: $transitionToNextSceneForButton1) { FacilityTour() .environment(appModel) } // You can add additional fullScreenCover modifiers for button 2 and 3 transitions. } }

I am develop visionOS app. I am now very interested in Metal and Compositor Services, but I have not explored them in depth. I know that Metal has a higher degree of control freedom. I am wondering if using Compositor Services will have fewer functions than RealityKit in AR technology (such as scene reconstruction and understanding, hover effect, etc.).

What is Game Mode? Game Mode optimizes your gaming experience by giving your game the highest priority access to your CPU and GPU, lowering usage for background tasks. And it doubles the Bluetooth sampling rate, which reduces input latency and audio latency for wireless accessories like game controllers and AirPods. See Use Game Mode on Mac See Port advanced games to Apple platforms How can I enable Game Mode in my game? Add the Supports Game Mode property (GCSupportsGameMode) to your game’s Info.plist and set to true Correctly identify your game’s Application Category with LSApplicationCategoryType (also Info.plist) Note: Enabling Game Mode makes your game eligible but is not a guarantee; the OS decides if it is ok to enable Game Mode at runtime An app that enables Game Mode but isn’t a game will be rejected by App Review. How can I disable Game Mode? Set GCSupportsGameMode to false. Note: On Mac Game Mode is automatically disabled if the game isn’t running full screen.

I was trying to move from appkit to swiftUI. As a learning project I am building a cellular automata style project based on Pattersons Worms.. I am trying something similar to the EA game Worms? for the Commodore 64. There is a video on YouTube of the game running, but I'm not allowed to link it here. The problem I have is that the animation is driven by a ruleset. When the automata hits a configuration that is not in the ruleset it is supposed to stop and ask the user. For each step the model returns either the next move, or nil to indicate the user need to make a choice that will be sent back to the model to be added to the ruleset. My current approach, and I might be following the wrong path, is a ZStack where the bottom level is the grid, the middle level is the established worm segments and the top level is either the animation of the next worm segment or the user chooser to choose the segment. I've only implemented the animation of the next worm segment. The idea is that when the model adds a segment that it first animated at the top level and then displayed by the middle level. Then the top level animates the next segment. I was animating the trim on the segment to draw the line. If the current move is nil, then the middle level draws the segment. If current move has a value, the animation draw it, and then on completion sets the current move to nil so that the bottom level draw it. The problem I ran into was resetting the animation to draw the next segment. I've tried two approaches. in one the completion resets the animation boolean variable, but I need a manual step to set the next stage of the animation. The other uses the completion to set the next step, but it the animation doesn't run for the step and the display is an always a step behind. I'm not sure how to both update the move and reset the animation at the same time. I have uploaded a simplified version without the full grid and simplified model to GitHub (https://github.com/thomasrdean/AnimationTest). Is there any other way to reset the animation the than the completion so I can use the completion to retrieve the next step from the model?

Hello, Thank you for attending today’s Metal & game technologies group lab at WWDC25! We were delighted to answer many questions from developers and energized by the community engagement. We hope you enjoyed it and welcome your feedback. We invite you to carry on the conversation here, particularly if your question appeared in Slido and we were unable to answer it during the lab. If your question received feedback let us know if you need clarification. You may want to ask your question again in a different lab e.g. visionOS tomorrow. (We realize that this can be confusing when frameworks interoperate) We have a lot to learn from each other so let’s get to Q&A and make the best of WWDC25! 😃 Looking forward to your questions posted in new threads.

On an iPad running iPadOS 26 beta 4, when tapping the Game Center Access Point, the overlay doesn’t show the configured achievements, leaderboards or challenges. I should specify this is an in-development app and the achievements and leaderboards are in the “Not Live” state, however they show on other devices running iOS 18 in the Access Point UI. Anyone else having this issue? If so, how should I test achievements and leaderboards while iOS 26 beta is out? The UI looks like this on iPadOS 26:

I am using Apple's original Lightning Digital AV-adapter (Lightning-to-HDMI dongle) to connect my iPhone to an external display via a HDMI cable. I need to synchronize rendering with the external display's refresh rate, so I create a new CADisplayLink tied to the external display's UIScreen: UIScreen.screens[externalDisplayIdx].displayLink(withTarget:, selector:). The callback is being called regularly, but with increasing delay relative to the CADisplayLink.timestamp, so the next time the callback is called, I have less and less time to draw the next frame (see the snippet below). Assuming 60 FPS, the value of secondsTillDeadline starts at an arbitrary value in the range of approx -0.0001 to 0.0166667, and then it slowly decreases towards zero (and for a brief period it goes into small negative numbers). Once it reaches zero, it flips back to 0.0166667 and continues to decrease again. This cycle repeats indefinitely. Changing the external display's resolution (UIScreen's mode) or the CADisplayLink's preferredFrameRateRange to a lower FPS does not seem to have any effect on the temporal drifting (even the rate of change seem to be the same). When I create a new CADisplayLink for the iPhone's main screen, the value of secondsTillDeadline is stable, it does not drift and it is very close to 0.0166667, as expected. Is this drift caused by the external monitor or by Apple's Lightning-to-HDMI dongle ...or is the problem somewhere else? Can the drifting be stopped? func onDisplayLinkUpdate(displayLink: CADisplayLink) { // Gradually decreases from 0.01667 to -0.0001, then flips back to 0.01667 and continues to decrease let secondsTillDeadline = displayLink.targetTimestamp - CACurrentMediaTime() }

I'm experiencing a specific issue where when using any of the MacOS 26 Tahoe betas with Low Power Mode enabled and using Vsync in fullscreen, my application framerate gets limited to a hard 30 fps. I have not experienced this on any older OS. For example Low Power Mode on 13.6 Ventura with Vsync fullscreen lets my application run at full 60 fps without issues. Is this a bug or a change in behavior of Low Power Mode on Tahoe? My application is 3D, runs at 60 fps and is sensitive to tearing, so I need Vsync and it is mostly utilized in fullscreen. And Low Power Mode is a default for many Macs, so default experience on Tahoe currently is a halved 30 fps. However there also seems to be inconsistencies of on which machines this happens, but older OSes are always fine.

I'm new to graphics and game design and I just wanted to know if a compute pipeline could be as efficient as a render pipeline for rasterization and an explanation on how and why. Also is it possible to manually perform rasterization with a render pipeline as in manipulate individual pixel data in a metal texture yourself but do it with a render pipeline?