Our use case is that we need to run a CLI script (on Mac) to set up backend configuration before each test case (UI test on real iOS device). The setup logic is test specific, so using pre-build scripts is not an option. Is this support in any way or what are best practices around such a setup? Ideally, we would still be able to execute the tests from within Xcode.

We had Xcode Cloud working with our project. We needed to re-auth the repo which failed and ended up needing to remove the config to reset it up as new. When on AppStoreConenct it shows its now not configured and to setup, which is good but when launch Xcode, press setup Xcode cloud it just gets stuck on loading source code repositories.

Hi everyone, I'm working on a macOS authorization plugin (NameAndPassword) to enable users to log into their system using only MFA, effectively making it passwordless. To achieve this, I'm attempting to store the user's password securely in the Keychain so it can be used when necessary without user input. However, when I attempt to store the password, I encounter error code -25308. Below is the code I'm using to save the password to the Keychain: objc code (void)storePasswordInKeychain:(NSString *)password forAccount:(NSString *)accountName { NSData *passwordData = [password dataUsingEncoding:NSUTF8StringEncoding]; NSDictionary *query = @{ (__bridge id)kSecClass: (__bridge id)kSecClassGenericPassword, (__bridge id)kSecAttrService: @"com.miniOrange.nameandpassword", (__bridge id)kSecAttrAccount: accountName, (__bridge id)kSecValueData: passwordData, (__bridge id)kSecAttrAccessible: (__bridge id)kSecAttrAccessibleAfterFirstUnlock }; // Delete any existing password for the account OSStatus deleteStatus = SecItemDelete((__bridge CFDictionaryRef)query); if (deleteStatus == errSecSuccess || deleteStatus == errSecItemNotFound) { [Logger debug:@"Old password entry deleted or not found."]; } else { [Logger error:@"Failed to delete existing password: %d", (int)deleteStatus]; } // Add the new password OSStatus addStatus = SecItemAdd((__bridge CFDictionaryRef)query, NULL); if (addStatus == errSecSuccess) { [Logger debug:@"Password successfully saved to the Keychain."]; } else { [Logger error:@"Failed to save password: %d", (int)addStatus]; } } Any insights or suggestions would be greatly appreciated!

Hi team, We're using CocoaPods in our project and we noticed the compiler fails to build certain targets saying it's "Missing required module 'x'" when trying to build them in Swift 6: We realized the modules the compiler is complaining about are pod dependencies required by the other target dependencies, and that this error will only appear when building with Swift 6 unless such dependencies are described on the Podfile as direct dependencies of the target, or we include them in the framework search paths. For example, the error in the image above will show if module 'X' import 'Y' and 'Y' imports 'CocoaLumberJack' and we don't specify a direct dependency between 'X' and 'CocoaLumberJack'. Regardless of the fact that we can manually add the missing module location to the target search paths, we'd like to understand why we're facing this issue in the first place, what changed between Swift 5 and Swift 6 that's requiring us now to explicitly describe these dependencies. I'd appreciate if someone could tell us more about this. We're particularly interested on knowing if this is an intentional change and how to handle it properly. Thanks

Hi, so i'm trying to use Activity.update but XCode throws an error if I don't use the ios 16 syntax, only to throw a warning that it's deprecated if I do. Screenshots below. Should I bug report or is there a known workaround?

Hai gais.. i have question about xcode installation.. can i use m2/ssd storage to install n running xcode? For free up my internal space

Xcode is adding un-wanted menu items to the Edit menu in a Mac Application. There is an automatically generated separator bar and an AutoFill menu item with two sub-menu items. Looking at the source code I see that two other items were suppressed in the initialize method of the AppController like this: NSMutableDictionary *defaultValues = [NSMutableDictionary dictionary]; //Get rid of Special characters menu item in edit menu: [defaultValues setObject: [NSNumber numberWithBool: YES] forKey: @"NSDisabledCharacterPaletteMenuItem"]; //Get rid of Start Dictation... menu item in edit menu: [defaultValues setObject: [NSNumber numberWithBool: YES] forKey: @"NSDisabledDictationMenuItem"]; [[NSUserDefaults standardUserDefaults] registerDefaults: defaultValues]; I guessed that there would also be a key like this: @"NSDisabledAutoFillMenuItem" but adding this to the code does nothing so apparently not. I searched programming forums and posters say that you can fix this by changing the name of the Edit menu to something like (space)Edit but this doesn't work. I searcher the Developer documentation and the Archives extensively for info about these keys but of course found nothing. Control-clicking on these pops up a menu of ways to search for these but none of them find anything. Control, option and command clicking on these keys results in ”?”. I can probably get a pointer to the menu and use NSMenu’s methods to delete these but something like the above would be better. Is there any documentation about this anywhere?

In WWDC23: Fix failures faster with Xcode test reports, the presenter showed off an Xcode feature called Automation Explorer, that allows playback of a screen recording corresponding to an XCUITest. For the life of me, I have not been able to find out how to enable/use this feature in Xcode 16. I am using Test Plans and have set the UI Testing configuration settings for Automatic Screen Capture to On, and keep all and Preferred Capture Format to Video, but am not seeing any screen recordings being produced after running the tests. Am I doing something wrong?

Hi everyone, I’m planning to develop a cross-platform PDF viewer app for iOS and macOS that will read PDFs from local storage and cloud services (Google Drive, iCloud, WorkDrive, etc.). The app should be read-only and display both the PDF content and its metadata (author, title, creation date, etc.). Key Features: View PDFs: Local and remote (cloud storage integration). Display metadata: Title, author, page count, etc. Cloud integration: Google Drive, iCloud, Zoho WorkDrive, etc. Read-only mode: No editing features, just viewing. Questions: Xcode Template: Should I use the Document App or Generic App template for this? PDF Metadata: Any built-in libraries for extracting PDF metadata in a read-only app? Performance: Any advice or documentation on handling large PDFs or cloud fetching efficiently? Thanks in advance for any advice or resources!

Safari samesite none cookie added after login but we are facing the issue in post method. While doing the post method cookie not getting into request header.And always sending the new cookie in the response header. Safari not sending the cookie into request header with samesite none. Kindly help me out.

Xcode 15.2 will not assign a UDID Identifier to my watch Apple 8 (ver. 10.2), therefore I do not see that Watch on my Dev account list of devises. When I build my App it will work fine on my iPhone 14 and it will show on the Available Watch App list on the phone and even (although shaded) on the Watch's Apps list itself, but it will not install and when I try to install I get this message: "This App could not be installed at this time". I know of many others that have the same problem. We have tried many ways to solve this problem, but without any success. It seems like Xcode 15 does not see the Watch. In fact when I click on the "Window-Devises" of Xcode I can see the iPhone and its identifier UDID, but it doesn't show the Watch although it is properly paired. Also, please note that the App will Install and Works perfectly fine in my old Watch 4 ( 10.2). However this particular Watch is present on the list of my DEV Account Devises as it was entered there by an earlier version of Xcode some two years ago. So it would appear that two versions of Xcode 15.x are a culprit in creating this problem. Any feedback or a solution to this problem would be greatly appreciated by many. Thank you

I'm currently using Xcode 16 Beta (16A5171c) and I'm getting a crash whenever I attempt to fetch using my ModelContext in my SwiftUI video using the environment I'm getting a crash specifically on iOS 18 simulators. I've opened up a feedback FB13831520 but it's worth noting that I can run the code I'll explain in detail below on iOS 17+ simulator and devices just fine. I'm getting the following crash: *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: 'The specified URI is not a valid Core Data URI: x-coredata:///MyApp/XXXXX-XXXXX-XXXX-XXXX-XXXXXXXXXXXX' It's almost as if on iOS18 SwiftData is unable to find the file on the simulator to perform CRUD operations. All I'm doing in my project is simply fetching data using the modelContext. func contains(_ model: MyModel, in context: ModelContext) -> Bool { let objId = palette.persistentModelID let fetchDesc = FetchDescriptor<MyModel>(predicate: #Predicate { $0.persistentModelID == objId }) let itemCount = try? context.fetchCount(fetchDesc) return itemCount != 0 }

Hello, I'm kinda new to Xcode and I was trying to get back to programming while I follow a course. There seemed to be a problem with the preview and it looks like there was nothing wrong with the code, at least from what I know. I can say this because the code is the default one that Xcode gives you when you start a new project. here is the error log. == PREVIEW UPDATE ERROR: SchemeBuildError: Failed to build the scheme “App” linker command failed with exit code 1 (use -v to see invocation) Link App.debug.dylib (arm64): Undefined symbols for architecture arm64: "_main", referenced from: ___debug_main_executable_dylib_entry_point in command-line-aliases-file ld: symbol(s) not found for architecture arm64 clang: error: linker command failed with exit code 1 (use -v to see invocation) == PREVIEW UPDATE ERROR: SchemeBuildError: Failed to build the scheme “App” linker command failed with exit code 1 (use -v to see invocation) Link App.debug.dylib (arm64): Undefined symbols for architecture arm64: "_main", referenced from: ___debug_main_executable_dylib_entry_point in command-line-aliases-file ld: symbol(s) not found for architecture arm64 clang: error: linker command failed with exit code 1 (use -v to see invocation)

I have a complex project that used to compile without any problems that i could not solve before I bought a new iMac (the latest, M4), which came with macOS Sequoia. I've ben able to compile the whole project since 1998, which has evolved into an AppKit Mac app written almost completely in Swift. I am also able to compile this project on Xcode 16.1 on MacOS Sonoma. However, since I upgraded to MacOS Sequoia, I am stumped with lots of errors that I don't know how to fix. Many of them are related to new build system, which works fine in smaller projects I have written, but it completely breaks when I use this more complex project. I've been unable to create a focused project so I can file a DTS incident, because when I try to recreate it in a new, more focused project, the problem goes away. I tried to transfer the code to a freshly created project, and I was able to make it build again without errors, but then this new project just creates empty bundles without any resources and executables in them. In almost 25 years of experience in coding, I've never encountered such huge problems with just a MacOS upgrade. I would like to have some guidance on how to proceed. Here is an example of the errors I'm getting: error: unable to write file '/SchIS64.build/Objects-normal/arm64/SchIS64.LinkFileList': fopen(/SchIS64.build/Objects-normal/arm64/SchIS64.LinkFileList, wb): No such file or directory (2) (in target 'SchIS64' from project 'Scheduler (Cocoa)') WriteAuxiliaryFile /SchIS64.build/unextended-module.modulemap (in target 'SchIS64' from project 'Scheduler (Cocoa)') cd /Users/admin/Documents/Development/Scheduler/Scheduler write-file /SchIS64.build/unextended-module.modulemap WriteAuxiliaryFile /SchIS64.build/unextended-module-overlay.yaml (in target 'SchIS64' from project 'Scheduler (Cocoa)') cd /Users/admin/Documents/Development/Scheduler/Scheduler write-file /SchIS64.build/unextended-module-overlay.yaml WriteAuxiliaryFile /SchIS64.build/SchIS64.hmap (in target 'SchIS64' from project 'Scheduler (Cocoa)') cd /Users/admin/Documents/Development/Scheduler/Scheduler write-file /SchIS64.build/SchIS64.hmap

When I'm in TERMINAL and I issue the cd command it says no such file or directory. I cut this from the terminal session: Last login: Tue Nov 12 20:10:57 on ttys000 The default interactive shell is now zsh. To update your account to use zsh, please run chsh -s /bin/zsh. For more details, please visit https://support.apple.com/kb/HT208050. iMac:~ robertsantovasco$ cd desktop iMac:desktop robertsantovasco$ cd L1 demo -bash: cd: L1: No such file or directory iMac:desktop robertsantovasco$ cd L1 -bash: cd: L1: No such file or directory iMac:desktop robertsantovasco$ cd L1 demo -bash: cd: L1: No such file or directory iMac:desktop robertsantovasco$ cd / iMac:/ robertsantovasco$ cd desktop -bash: cd: desktop: No such file or directory iMac:/ robertsantovasco$ cd L1 demo -bash: cd: L1: No such file or directory iMac:/ robertsantovasco$ cd L1 demo -bash: cd: L1: No such file or directory iMac:/ robertsantovasco$ cd desktop -bash: cd: desktop: No such file or directory iMac:/ robertsantovasco$ cd desktop -bash: cd: desktop: No such file or directory iMac:/ robertsantovasco$ CD desktop /usr/bin/CD: line 4: cd: desktop: No such file

I have different versions of my iOS App (written in SwiftUI). The app on the store, the App Clip, and one or two next version apps not yet released (e.g. A/B comparison). All good. But now I've started creating UI and Unit tests and I'm confused about how to get this working. Each build target has its own scheme. And in that scheme I have a Test plan for that target. E.g. The App Clip scheme has an App Clip test plan. Since all the app variants are very similar, I only have one set of unit tests and one set of UI tests so each test plan includes the same unit test target and the UI test target. Problem: When I selected a scheme (e.g. for the App Clip) and ran the tests, it turned out that all the tests ran for another build target, not the target of the scheme. I think this might be because within the definition of the test target there's a field specifying the host application. I.e. the build target. Question: How can I set up my project so that the test plan uses the relevant target build? Or do I have to duplicate all the test targets (one for each target)? Or do I have to manually change each test target before running it for a particular build target?

Hello, I am experiencing a problem where I am unable to build my app using the command - npx eas build --platform ios --profile development, although I have Admin rights in my team in the AppStore Connect. I read that here - https://forums.developer.apple.com/forums/thread/737541 someone already experience the same issue and it was resolved after reporting on the forum, so that's what i decided to do as well. I am attaching few screenshots as well. Thanks!

I'm still getting this error (SwiftData/ModelContext.swift:3253: Fatal error: Failed to identify a store that can hold instances of SwiftData._KKMDBackingData<Presents_2024.Item> from [:]) in Xcode 16.1 Beta (16B5001e). The app works for a limited amount of time and then crashes with this error. It looks like the SwiftData model isn't being created properly and when a context is saved it crashes. Can you tell me if this error will be fixed in the next beta?

I developed a watchOS app to capture gyro data, save it in real-time as a CSV file, and send it to an iOS app. However, when I start writing with the watch on, the screen dims, and it stops working. It only resumes operation when I tap the screen again. Is there a way to let it run in the background and transmit files in real-time, even when the screen is off?

Hi Apple Engineers, I am encountering an issue where the memory usage reported by the Xcode memory report and the Xcode Instruments memory profiler are not aligned. Specifically: Xcode Memory Report: After implementing autoreleasepool, URLSession reading a zip file, and moving the task inside DispatchQueue.global().async, the memory usage goes down from 900MB to 450MB, indicating a potential memory leak. Xcode Instruments Memory Profiler: The memory usage goes down from 900MB to 100MB, suggesting that the memory has been properly released and there is no significant memory leak. Could you please help me understand the discrepancy between these two tools and provide guidance on the appropriate way to interpret the memory usage in my application? Which result I should rely on it? I would greatly appreciate your insights and expertise on this matter. Thank you in advance for your assistance.