Dear Developers, I would like to suggest an optimization for the logic governing the download and installation queue for app updates. Currently, when multiple applications are awaiting updates, the prioritization does not appear to consider the update payload size. My proposal is to implement a logic that prioritizes the download and installation of updates with a smaller delta size (fewer MB) before those with a larger delta. Practical Example: A 1MB update would be processed before a 500MB update, even if their arrival order in the queue was inverted. Potential Benefits: Perceived Speed Optimization (UX): Users would gain access to functional applications more quickly, especially in scenarios with multiple pending updates. Network Efficiency: In limited or intermittent bandwidth scenarios, completing smaller downloads first can reduce the chance of download failures and optimize network resource utilization. Device Resource Management: Frees up temporary storage and processing resources more rapidly for smaller updates. I believe this optimization would bring significant gains in terms of User Experience (UX) and the operational efficiency of the platform. Thank you for your attention and consideration. Sincerely,

There’s a critical, actively exploited vulnerability in Apple’s iOS activation servers allowing unauthenticated XML payload injection: https://cyberpress.org/apple-ios-activation-vulnerability/ This flaw targets the core activation process, bypassing normal security checks. Despite the severity, it’s barely discussed in public security channels. Why is this not being addressed or publicly acknowledged? Apple developers and security researchers should urgently review and audit activation flows—this is a direct attack vector on device trust integrity. Any insights or official response appreciated.

I have an older Macbook, and it only supports Xcode 15.2, and I want to be able to work with my iPhone SE 3rd gen, which currently has the iOS 26 beta on it. Is there a place I can find the download for that, and can I even run it on that version of Xcode? If not, can I download a newer version of Xcode on MacOS Ventura?

So I downloaded and installed iOS26 on my iPhone 15 Pro and after that it does not want to boot anymore. It shows a battery with one red line. Which is weird because before it restarted it had 80% of the battery and I had the power cable connected at all time. Now I can't boot it up anymore. Not even with the volume button up, down, power button trick. Please help!

I have an iPhone 14 Pro. I downloaded the iOS 26 beta and had a SERIOUS error, rendering the phone unusable. I charged it to 60% and kept it plugged in while updating. While updating, I restarted several times at the Apple logo, then at the Welcome screen, and it had quite a few bugs with low battery warnings. When I turned it on, I noticed I had 1% (I thought it was strange). When it was plugged in, it wouldn't charge; it only had 1% left, and it also restarted every 2 minutes. Off-plugged, it did exactly the same thing. In the end, I had to go back to iOS 18.5; I had no problems with this version.

As part of the WWDC25 Keynote, a technology was announced that can present 2D images as 3D spatial scenes. This announcement is supported by a Press Release. ...developers can use the Spatial Scene API to make their app experience even more immersive. Zillow is taking advantage of the API for their Zillow Immersive app, allowing users to see images of homes and apartments with the rich depth and dimension that spatial scenes offer. The feature also appears in the Photos App on iOS 26 Developer Beta 1. Tapping "Spatial Scene" on any photo opens a view of that photo with a parallax effect. I've searched the WWDC sessions and new documentation and have come up short. Reaching out here for help. Is there any documentation for Spatial Scene API? Or any guidance on how to implement the spatial scene in iOS?

In previous versions of the simulator, it was possible to import files into the Files app by dragging them from the Finder into the Simulator. It appears that in the iOS 26 Simulator, this opens the file in Safari. I've only tried it with .json files so far. The documentation at https://developer.apple.com/documentation/xcode/sharing-data-with-simulator says that the original behaviour should happen: To add files to Simulator, select one or more files in Finder on your Mac, then click the Share button. Select Simulator from the share destination list. Choose the simulated device from the drop-down list. Simulator opens the Files app, and lets you select where to save the files. I'd love to learn if this is intentional behaviour, and if so, what workarounds there might be. I use this pattern quite a lot, as I have a HealthKit app, and I've built a system that allows me to export workouts as JSON files from a real device, that I can then import into a simulator for testing. Edit: I found a workaround. Make a folder in Files.app, then search for it within ~/Library/Developer/CoreSimulator/Devices. Open the folder in Finder, then add any files you want to be available in the Simulator.

The swift syntax compilation reported an error. as follows How should I be compatible

I'm trying to download the iOS 26 restore image for my iPhone 14 Pro Max, which is my test device. However, when I attempted to install it directly via the over-the-air (OTA) update, the iPhone rebooted to the iOS 26 "Welcome" screen, but with no touch functionality—the screen was completely unresponsive. I restored the device back to iOS 18.5 and tried the OTA update again, but once more, the touch screen stopped working upon completion. Now, I am trying to download the iOS 26 restore image from the official developer page (https://developer.apple.com/download/#ios-restore-images-ipad-new) to install it manually using my Mac. However, I've run into a problem with the download links: The link for the iPhone 14 Pro Max (iOS 26) restore image actually downloads the iPhone 14 Pro (iOS 18.5) image. Conversely, the link for the iPhone 14 Pro seems to provide the correct iPhone 14 Pro Max (iOS 26) image. The issue is that when I try to restore my iPhone using this seemingly correct file, I receive an error that the firmware file is not valid or compatible. I suspect it's not being properly signed by Apple for my device during the restore process. Does anyone have the correct, official download link for the iOS 26 restore image for the iPhone 14 Pro Max? How can I fix these errors?

I set iOS 26 to install overnight, put my iPhone 16 Pro on the MagSafe charger, watched it charge just fine, and went to sleep. When I woke up the iPhone showed the “plug into power” dead battery screen. I took it off MagSafe and put it back on. A half hour later the phone was warm but still wouldn’t power on, just showed the battery screen with a little red in it. I took it off MagSafe and plugged it into my iPad charging brick with USB cable to give it more power, still it did not turn on. I tried holding all the buttons to try to force a restart but didn’t work. For anyone else encountering this, do this to enter DFU mode and restore it. I had to do it a few times before I got the timing right. Plug into your Mac and open Finder (or apparently a PC with Apple Devices or iTunes) Press and quickly release volume up Press and quickly release volume down Press and hold right side button When the battery disappears and screen goes black, hold volume down and continue holding side button After a couple seconds release the side button and continue holding volume down A prompt to allow connecting to the iPhone should appear after a couple seconds, click Allow, and it’ll say the iPhone entered DFU mode - proceed to restore the firmware

Fix the beta iOS 26 right away i can’t check my software update page in my settings and iPhone charging ge overheated and slow to charge to

I'm running macOS 15.5. I now have Xcode 26 and I'm testing my iOS app against iOS 26. I've encountered several UIKit / iOS 26 bugs I'd like to report. In Feedback Assistant I choose "Developer Technologies & SDKs". Eventually I get asked "What build does the issue occur on?". The list of choices is: iOS 18.2 Seed 4 iOS 18.1.1 iOS 17.7.2 An earlier iOS build I'm not sure So how to I report this as an iOS 26 beta 1 issue?

On WWDC25 session "Meet Liquid Glass", two Liquid Glass variants are mentioned: "regular" and "clear". "Regular" seems to be the default setting for UIGlassEffect, but I was not able to find an option for clear. Is there a native element that uses clear? Is it coming to later betas for iOS 26?

iOS 26 added smoothness to CIRoundedRectangleGenerator, for use with CIFilter.roundedRectangleGenerator. What should the smoothness value be to achieve the same corner curve as CALayerCornerCurve.continuous? Does it need to be calculated based on the extent size, if so, how?

Some users have reported an error editing portrait photo assets in my app: The operation couldn’t be completed. (CINonLocalizedDescriptionKey error 3.) What is that error? Will affected photos always encounter this error (due to data corruption for example) or can it be resolved in a future iOS update? FB16241301

The documentation for PHAssetChangeRequest.revertAssetContentToOriginal says it will fail if the original asset content is not on the current device so you should use PHAssetResourceManager to download it first, but this no longer seems to be the case in the latest iOS versions because an error no longer occurs when I take a photo on my iPhone, edit it, open Photos on my iPad and let it sync, then open my app on iPad and call revertAssetContentToOriginal for that asset. Does the system now take care of downloading the original when needed?

I have non-consumable and consumable in-app purchases in my app. The tutorial I was following stated Transaction.currentEntitlements includes unfinished consumables, which is incorrect according to the documentation. Is the correct way to handle unfinished consumables (and non-consumables) to implement Transaction.updates and call finish() if it’s verified? The documentation says that listener will receive unfinished transactions once upon app launch, so with that, do I understand correctly you do not need to implement Transaction.unfinished unless you want to look for unfinished transactions manually later on? Otherwise what is the correct and most recommended way to handle unfinished consumables? Is there a way to test that scenario in Xcode?

I have an app that uses NSPersistentCloudKitContainer stored in a shared location via App Groups so my widget can fetch data to display. It works. But if you reset your iPhone and restore it from a backup, an error occurs: The file "Name.sqlite" couldn't be opened. I suspect this happens because the widget is created before the app's data is restored. Restarting the iPhone is the only way to fix it though, opening the app and reloading timelines does not. Anything I can do to fix that to not require turning it off and on again?

Hi everyone, I’m currently testing iOS 26 on my iPhone as part of the developer program. According to Apple’s documentation and demo materials, a new screenshot animation was introduced in this version. However, when I take a screenshot on my device, the animation remains the same as in previous iOS versions. I’ve double-checked that I’m running the correct build of iOS 26, and I haven’t found any settings that might enable or disable this feature. Is anyone else experiencing the same issue? Could this new animation be device-specific, region-limited, or require additional configuration? Any insight would be appreciated! Thanks in advance, Alonso Rivera

been testing out ios 26 since it came out and now all of a sudden everytime it boots only into recovery and wont do anything else. recovery says no known issues found.