I've got a watch app, still with storyboard, WKInterfaceController and WatchConnectivity. After updating it for swift 6 concurrency I thought I'd keep it for a little while without swift 6 concurrency dynamic runtime check. So I added -disable-dynamic-actor-isolation in OTHER_SWIFT_FLAGS, but it doesn't seem to have an effect for the Apple Watch target. Without manually marking callbacks where needed with @Sendable in dynamic checks seem to be in place. swiftc invocation is as (includes -disable-dynamic-actor-isolation): swiftc -module-name GeoCameraWatchApp -Onone -enforce-exclusivity\=checked ... GeoCameraWatchApp.SwiftFileList -DDEBUG -enable-bridging-pch -disable-dynamic-actor-isolation -D DEBUG -enable-experimental-feature DebugDescriptionMacro -sdk /Applications/Xcode.app/Contents/Developer/Platforms/WatchOS.platform/Developer/SDKs/WatchOS11.2.sdk -target arm64_32-apple-watchos7.0 -g -module-cache-path /Users/stand/Library/Developer/Xcode/DerivedData/ModuleCache.noindex -Xfrontend -serialize-debugging-options -enable-testing -index-store-path /Users/stand/Library/Developer/Xcode/DerivedData/speedo-almhjmryctkitceaufvkvhkkfvdw/Index.noindex/DataStore -enable-experimental-feature OpaqueTypeErasure -Xcc -D_LIBCPP_HARDENING_MODE\=_LIBCPP_HARDENING_MODE_DEBUG -swift-version 6 ... -disable-dynamic-actor-isolation flag seems to be working for the iOS targets, I believe. The flag is described here Am I missing something? Should the flag work for both iOS and Apple Watch targets?

Hi everyone. Does anyone know if there a way to get a list of watch faces for a paired Apple Watch, or to set the current watch face? Or is this just not allowed? Have looked through the WatchKit, WatchConnectivity, and WatchOS documentation and haven't found anything.

Our watch app, Regatta Timer, is a specialised countdown timer for sailing competitions. It is crucial that the beeps & haptics continue when 'wrist down' on alway on displays. We tried to enable this by adding 'background mode' but that only works in the Xcode Apple Watch simulator, not on an actual device with always on display. Any idea how we can get this working also on the Apple Watch device? In ContentView.swift we currently added this code: WKInterfaceDevice.current().play(sound) } but that doesnt work - regardless of adding , phase == .active` or not. STEPS TO REPRODUCE Install on an ACTUAL DEVICE with always on display start the countdown timer: beeps & sounds are OK (each minute,...) do 'wrist down': the countdown timer continues on the dimmed display, but the sounds & haptics stop working until you raise your wrist to wake up the display.

So I'm trying to use SpriteKit to make the background of my game. The walls have alpha 1.0, and the safe area alpha 0 and fully transparent. (e.g. a big black square with a smaller transparent square in the middle of it). Yet sprite kit always assume the entire image is either fully opaque or fully transparent. That defies its purpose isn't it? Is there a way to make this work?

I have a depended watch app bundled with my iOS app. // ... <key>WKRunsIndependentlyOfCompanionApp</key> <false/> // ... My code: guard WCSession.isSupported() else { return } let session = WCSession.default session.delegate = self session.activate() public func session(_ session: WCSession, activationDidCompleteWith activationState: WCSessionActivationState, error: Error?) { // ... if (session.activationState == .activated) { let log = Log(isPaired: session.isPaired, isWatchAppInstalled: session.isWatchAppInstalled) uploadLogToServer(log) } // ... } and also: guard WCSession.isSupported() else { return } let session = WCSession.default guard session.activationState == .activated, session.isWatchAppInstalled else { return } do { try session.updateApplicationContext(...) } catch { uploadErrorToServer(error) } What I've observed is that when I query the logs in the server's database, I get entities with isPaired = false and isWatchAppInstalled = true. Also, when I query the errors I see deviceNotPaired errors. So my question is, does Should WCSession.isPaired property be true before accessing WCSession.isWatchAppInstalled property ?

Hello, since an update in September, the alarm widget on the watch face no longer counts down accurately like it used to. This is extremely frustrating for me because I used it for work so I have know exactly how much time I had in a particular circumstance. So for example, say I have an alarm set for 12:30. Before the update in September, I was able to look at my watch and know immediately that I had 24 minutes before the alarm, or look again and know it was the. 10 minutes before the alarm. Now, if I look at the watch face, it will say I have 24 minutes before the alarm, but it may actually only be 10 minutes before the alarm. I understand for some people this may be trivial, but it is really disappointing for me, and renders one of the most useful features of the Apple Watch useless to me now. I am hoping this is just an oversight during an update, so looking to see if this is something that is currently being worked on? I just installed beta 11.3 and still having the same issue. Now, if I press and hold on the watch face, like I’m going to change watch faces, then click out of it. It does update it. But it is not the same as it used to be. Thank you

Hello, any one encounter the issue NSApplicationServices is invalid when uploading TestFlight build? We are facing an issue with our latest iOS build. For context, we are trying to add support for the apple watch connectivity with tvOS. After uploading our build, we get the following error: Invalid Info.plist key. The key 'NSApplicationServices' in bundle myapp.app/Watch/watch.app is invalid. However, the doc indicates that NSApplicationServices must be declared in the Info.plist file (source: https://developer.apple.com/documentation/devicediscoveryui/connecting_a_tvos_app_to_other_devices_over_the_local_network?changes=_1_7) Dev environment: Xcode v14.0 (14A309) to dev and archive Deployment target: watchOS 6.0 & iOS 13.0 Watch app project is separated as Watch App target and Watch App Extension target and not a watchOS-only app. Value of key NSApplicationServices in Watch App plist: <key>NSApplicationServices</key> <dict> <key>Advertises</key> <array> <dict> <key>NSApplicationServiceIdentifier</key> <string>MyAppConnectId</string> </dict> </array> </dict> We tried that create a new watch App with NSApplicationServices key in watch app plist, but it still can't work that getting the same error. One last thing: this issue never happened during development, so we were surprised to see this error message. FYI, the doc we are referring: https://developer.apple.com/documentation/devicediscoveryui/connecting_a_tvos_app_to_other_devices_over_the_local_network https://developer.apple.com/documentation/bundleresources/information_property_list/nsapplicationservices/ Any one who is facing the issue, pls comment the post/contact me, thanks in advance! let myE_mail = "whailong" + "2010" + "@" + "g" + "ma" + "il." + "com"

Whenever I try to build on my Apple Watch using Xcode, I often encounter connection issues. It typically takes about an hour of troubleshooting, including restarting devices, restarting Xcode, erasing the Apple Watch, and other steps. I was wondering if anyone else has experienced similar problems and if there are any effective solutions.

I have an iOS app, watchOS app, and iOS Widget that shows the most recent data in the database. The watch app sends data to the iOS app over the WCSession and is received in session(didReceiveMessage, replyHandler). After that data is processed, reloadAllTimelines() is called. When running in Simulator or on device plugged in to debugger, it works, the widget updates when the app is closed (in background, even if force quit). But when running TestFlight or App Store build, the data is still processed and saved to Core Data (I open the app and it's there), but the widget doesn't update. It seems that reloadAllTimelines only works when the app is in foreground (at least in non debug builds). I dont have an iOS 17 device to check but I think this is a recent bug with iOS 18.

When launching the SimpleWatchConnectivity sample in a simulator (iOS 18.2 + watchOS 11.2), almost all the functionality works, but TransferFile does not work. The error is the following: -[WCFileStorage persistOutgoingFileTransfer:] error serializing file transfer <WCSessionFileTransfer: ...> due to Error Domain=NSCocoaErrorDomain Code=4866 "Caught exception during archival: This object may only be encoded by an NSXPCCoder." How can it be fixed or worked around?

I'm encountering an issue with HealthKit permissions and would appreciate some guidance: In my app's previous version, I granted write permissions for HKObjectType.workoutType() via the WatchKitExtension. Now, in the upcoming version, I'm trying to request read permissions for both HKObjectType.workoutType() and HKSeriesType.workoutRoute() via the iOS app. However, after granting access: The read permissions for Workout and Workout Route don't show up under Settings -> Health -> Data and Access -> [My App]. The Workout Route permission status remains notDetermined, even though I selected "Allow" when prompted. Interestingly, if I request the same permissions via the WatchKitExtension, everything works as expected, and the issue doesn't occur. Has anyone experienced a similar issue or have insights into why this might be happening? Could it be related to requesting permissions from the iOS app instead of the WatchKitExtension?

I'm encountering an issue with HealthKit permissions and would appreciate some guidance: In my app's previous version, I granted write permissions for HKObjectType.workoutType() via the WatchKitExtension. Now, in the upcoming version, I'm trying to request read permissions for both HKObjectType.workoutType() and HKSeriesType.workoutRoute() via the iOS app. However, after granting access: The read permissions for Workout and Workout Route don't show up under Settings -> Health -> Data and Access -> [My App]. The Workout Route permission status remains notDetermined, even though I selected "Allow" when prompted. Interestingly, if I request the same permissions via the WatchKitExtension, everything works as expected, and the issue doesn't occur. Has anyone experienced a similar issue or have insights into why this might be happening? Could it be related to requesting permissions from the iOS app instead of the WatchKitExtension?

support destinations have no Apple Watch, I tried delete the watch App target and recreate watch App for Existing app, but if is unuseful

Hi, I am new to swift and IOS development, I was developing an app which can be used to communicating between Apple Watch and iPhone. Something strange occurred when I was trying to observe the status of the message(UserInfo) sent by func transferUserInfo(_ userInfo: [String : Any] = [:]) -> WCSessionUserInfoTransfer. I was trying to observe isTransferring(a boolean value) in WCSessionUserInfoTransfer which was returned by the function mentioned above, but it seems cannot be updated even if the message queue was empty, it seems to always be True. Here is my sample code: let transfer = session.transferUserInfo(message) if transfer.isTransferring { Timer.scheduledTimer(withTimeInterval: 0.5, repeats: true) { timer in print("Queued message count: \(self.session.outstandingUserInfoTransfers.count), isTransferring:\(transfer.isTransferring)") if !transfer.isTransferring { timer.invalidate() // irrelevant codes... } } } else { // other irrelevant codes... } Appreciate if anyone can help me out of this problem. Best wishes.

I recently added a new target for Apple Watch, which works fine on the simulator. However, I wasn't able to run it on real Apple watches. First, I don't see it in the list of devices, even after I click "trust" and connect to my Mac over charging cable. Second, I've always used automatic code signing, and everything seems OK here. Third, I also tried distributing it over TestFlight, but that build doesn't appear in the TF. I restarted my phone and relaunched the TF app. So, when I install the app to my iPhone over the cable, the watch app doesn't appear on Apple watches. Then, If I go to watch app and install my app manual (I see it at the bottom with the "install" button), it fails with the error "This app cannot be installed because its integrity could not be verified.". Also, there's an icon on the Apple watch, but it shows the same error when I click it. I unpaired and paired it again, but it didn't help. Also, I tried another pair of phones, and the same thing happened. I use an AppStore account (not enterprise), and the main app works fine. Is there a way how to fix it?

After updating to iOS 17.5 & WatchOS 10.5, the didFinish response from WCSessionDelegate does not come when transferring files from iPhone to Watch. It worked normally until 17.4 & 10.4. There is no problem with checking file completion even if a didFinish response is not received, but I think Apple needs to check this issue and update. File transfer is done using the transferFile function of WCSession. The file being transferred is a single file and its size does not exceed 30MB. When you try to transfer Pi, the message below appears in the Xcode log section. -[WCFileStorage persistOutgoingFileTransfer:] error serializing file transfer <WCSessionFileTransfer: 0x300155d60, session file: <WCSessionFile: 0x3001575c0, identifier: 0C8857EC-7D74-4E78-BA28-6C5526DE8949, file: /private/var/mobile/Containers/Data/Application/DD797847-DED1-42C0-989F-34CD05825007/tmp/C042D096-F12B-4B50-8792-868475DBBF47.zip, hasMetadata: YES>, transferring: YES> due to Error Domain=NSCocoaErrorDomain Code=4866 "Caught exception during archival: This object may only be encoded by an NSXPCCoder. ( 0 CoreFoundation 0x000000019b064f2c 00E76A98-210C-3CB5-930B-F236807FF24C + 540460 1 libobjc.A.dylib 0x0000000192ef6018 objc_exception_throw + 60 2 Foundation 0x0000000199fe7778 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 1419128 3 Foundation 0x0000000199ea0e14 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 81428 4 WatchConnectivity 0x000000021d055f60 1AB4DDD6-9238-3965-B744-819F2916C8CC + 126816 5 Foundation 0x0000000199ea0e14 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 81428 6 WatchConnectivity 0x000000021d0567f0 1AB4DDD6-9238-3965-B744-819F2916C8CC + 129008 7 Foundation 0x0000000199ea0e14 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 81428 8 Foundation 0x0000000199f30628 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 669224 9 WatchConnectivity 0x000000021d0583ac 1AB4DDD6-9238-3965-B744-819F2916C8CC + 136108 10 WatchConnectivity 0x000000021d04390c 1AB4DDD6-9238-3965-B744-819F2916C8CC + 51468 11 WatchConnectivity 0x000000021d046640 1AB4DDD6-9238-3965-B744-819F2916C8CC + 63040 12 Foundation 0x0000000199ea9be0 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 117728 13 Foundation 0x0000000199ea9aa0 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 117408 14 Foundation 0x0000000199ea98a0 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 116896 15 Foundation 0x0000000199ea7b40 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 109376 16 Foundation 0x0000000199f2c558 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 652632 17 Foundation 0x0000000199f2c1a4 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 651684 18 libdispatch.dylib 0x0000000105ed7764 _dispatch_block_async_invoke2 + 148 19 libdispatch.dylib 0x0000000105ec67bc _dispatch_client_callout + 20 20 libdispatch.dylib 0x0000000105ec98e0 _dispatch_continuation_pop + 676 21 libdispatch.dylib 0x0000000105ec8bb8 _dispatch_async_redirect_invoke + 680 22 libdispatch.dylib 0x0000000105edaae4 _dispatch_root_queue_drain + 404 23 libdispatch.dylib 0x0000000105edb4d8 _dispatch_worker_thread2 + 188 24 libsystem_pthread.dylib 0x00000001f7ebb8f8 _pthread_wqthread + 228 25 libsystem_pthread.dylib 0x00000001f7eb80cc start_wqthread + 8 )" UserInfo={NSDebugDescription=Caught exception during archival: This object may only be encoded by an NSXPCCoder. ( 0 CoreFoundation 0x000000019b064f2c 00E76A98-210C-3CB5-930B-F236807FF24C + 540460 1 libobjc.A.dylib 0x0000000192ef6018 objc_exception_throw + 60 2 Foundation 0x0000000199fe7778 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 1419128 3 Foundation 0x0000000199ea0e14 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 81428 4 WatchConnectivity 0x000000021d055f60 1AB4DDD6-9238-3965-B744-819F2916C8CC + 126816 5 Foundation 0x0000000199ea0e14 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 81428 6 WatchConnectivity 0x000000021d0567f0 1AB4DDD6-9238-3965-B744-819F2916C8CC + 129008 7 Foundation 0x0000000199ea0e14 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 81428 8 Foundation 0x0000000199f30628 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 669224 9 WatchConnectivity 0x000000021d0583ac 1AB4DDD6-9238-3965-B744-819F2916C8CC + 136108 10 WatchConnectivity 0x000000021d04390c 1AB4DDD6-9238-3965-B744-819F2916C8CC + 51468 11 WatchConnectivity 0x000000021d046640 1AB4DDD6-9238-3965-B744-819F2916C8CC + 63040 12 Foundation 0x0000000199ea9be0 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 117728 13 Foundation 0x0000000199ea9aa0 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 117408 14 Foundation 0x0000000199ea98a0 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 116896 15 Foundation 0x0000000199ea7b40 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 109376 16 Foundation 0x0000000199f2c558 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 652632 17 Foundation 0x0000000199f2c1a4 3D3A12E3-F5E9-361F-B00A-4A5E8861AA55 + 651684 18 libdispatch.dylib 0x0000000105ed7764 _dispatch_block_async_invoke2 + 148 19 libdispatch.dylib 0x0000000105ec67bc _dispatch_client_callout + 20 20 libdispatch.dylib 0x0000000105ec98e0 _dispatch_continuation_pop + 676 21 libdispatch.dylib 0x0000000105ec8bb8 _dispatch_async_redirect_invoke + 680 22 libdispatch.dylib 0x0000000105edaae4 _dispatch_root_queue_drain + 404 23 libdispatch.dylib 0x0000000105edb4d8 _dispatch_worker_thread2 + 188 24 libsystem_pthread.dylib 0x00000001f7ebb8f8 _pthread_wqthread + 228 25 libsystem_pthread.dylib 0x00000001f7eb80cc start_wqthread + 8 )}

Exploring Live Activity feature for Apple Watch right now and found that it has this default view with "Open on iPhone" button when you tap Live Activity. That button perfectly brings iOS app to foreground as if you tapped iOS's Live Activity. Is there a way to mimic that behavior from inside Watch app code? From inside WKApplicationDelegate, for example Tried openSystemURL but it seems lile it's only available for tel or sms links

I developed a watchOS app to capture gyro data, save it in real-time as a CSV file, and send it to an iOS app. However, when I start writing with the watch on, the screen dims, and it stops working. It only resumes operation when I tap the screen again. Is there a way to let it run in the background and transmit files in real-time, even when the screen is off?

I get this error with xcode 16.1 uploading to app store: Asset validation failed Invalid Info.plist key. The key 'UIBackgroundModes' in bundle new3bmeteo.app/Watch/new3bmeteowatch.app/PlugIns/new3bmeteowatch Extension.appex is invalid. (ID: a1e48ae9-5b51-4252-99e7-116b6359cb39) info.plist: // some other things UIBackgroundModes location

Our company has developed a product available, which measures body composition. During the measurement process, lasting 40 seconds, we require the device screen to remain illuminated. We are actively using the "Always On" feature and have set the timer on the watch to 70 minutes to prevent the screen from dimming. However, we are encountering issues where the screen may still turn off during the measurement. Could you please provide guidance on how to keep the screen active with backlighting across all Apple Watch models during measurements?