Hi, I have started facing an issue with Xcode since updating to macOS 26.1. The debugger is not stopping at breakpoints in Objective-C code, however breakpoints in Swift file are working fine. I am using Xcode 16.4. For breakpoints in Objective-C files I have started to get this message since the OS update - 'Xcode won't pause at this breakpoint because it has not been resolved.' I have already tried cleaning derived data and build folder. I do not want to upgrade to Xcode 26. Could someone help with the fix? Thanks

Intelligence AI powered feature fails on complex project with network error when “Reasoning” is set higher then “Low”. The visual feedback shows sending some context and answer being generated, but eventually stops with network error. Retries with “Reasoning” set higher than “Low”. won’t help, but retries or same queries with “Low” or "Minimal" reasoning always succeed. It is obvious that connectivity is not lost but looks like some kind of timeout expires and cancels the response, even not the request. Visual feedback shows the context being successfully uploaded and even shows the indicator of the answer being generated.

Hi all, I'm working on a Call Directory Extension using CXCallDirectoryExtensionContext. I want to add a list of numbers to be blocked. Here's the function I use: override func beginRequest(with context: CXCallDirectoryExtensionContext) { context.delegate = self let blockedNumbers = loadNumberEntries(forKey: blockedKey) let identifiedNumbers = loadNumberEntries(forKey: identifiedKey) addAllBlocking(blockedNumbers, to: context) addAllIdentification(identifiedNumbers, to: context) context.completeRequest() } private func addAllBlocking(_ entries: [NumberEntry], to context: CXCallDirectoryExtensionContext) { let numbers: [Int64] = entries.compactMap { Int64($0.countryCode + $0.phone) }.sorted() for number in numbers { context.addBlockingEntry(withNextSequentialPhoneNumber: number) print("# Added blocking entry: \(number)") } } When I run this, I see in the console: # Added blocking entry: (*my number with country code*) So it seems the number is added correctly. However, in practice, the number is not blocked on the device. I’ve made sure that: The number is stored with the country code prefix. The extension is enabled in Settings → Phone → Call Blocking & Identification. The extension is reloaded after adding numbers. The array of numbers is sorted in ascending order before calling addBlockingEntry. Despite all this, the number still isn’t blocked. Does anyone know why the print shows the number added, but it doesn’t actually block the call? Am I missing something in the way CXCallDirectoryExtensionContext works? Thanks for any advice!

Sorry if this is a dumb question. I’m still a beginner. I created an Xcode Playground app with Microphone and Speech Recognition capabilities enabled, along with a backup Info.plist. However, when running the app on Mac Catalyst, a real device, or the iOS and iPadOS simulators, it crashes right after the Speech Recognition permission popup and again after the Microphone permission popup. For extra context, the app initially worked fine in the Swift Playgrounds app, but that environment uses an outdated SDK, so it no longer supports some of the features I’ve implemented. I’m also struggling to find clear, beginner-friendly documentation that explains how AVAudioEngine works, which is making it hard to understand what’s going wrong and how to debug it.

I’m seeing what looks like a change or possible bug in Xcode when creating a new Swift Playground. When I create a Swift Playground using Xcode (File → New → Playground), the project is generated without an Assets folder. I’ve reproduced this multiple times with fresh Playgrounds to rule out user error and the folder is consistently missing. Previously, new Playgrounds included an Assets catalog by default, which makes this behavior surprising.

Hi, I have a recurrent problem with an Xcode workspace that I cannot figure out how to solve: When I command-click a symbol (or press ctrl-cmd-J) to find its definition, and when that definition is in a header file belonging to a custom static library, Xcode opens a header located in the derivedData folder rather than in the project's source codes. The exact location of this file is not in the main 'Build' folder but rather in a folder that seems dedicated to indexing: derivedData/myProject/Index.noIndex/Build/Products/Debug/Include/theHeader.h Consequently the file opened by Xcode is uneditable, I have to close it and reopen the source using another method. Even when the correct header is already opened, and I try again, Xcode reopens the wrong file so that it's opened twice with different paths. In the config file of the main application project, I reference the sources of these static libraries like this: HEADER_SEARCH_PATHS = ${SRCROOT}/myLibrary1/Sources ${SRCROOT}/myLibrary2/Sources ${SRCROOT}/myLibrary3/Sources However, removing this doesn't fix the issue and I don't see any other related-settings. Any idea to fix this annoying issue would be greatly appreciated, thanks!

Hello everyone, I’m stuck with an App Store Connect issue and would really appreciate any insight from the community. I am unable to submit my app for review due to the following persistent error: “Unable to Add for Review – There are still preview uploads in progress.” What makes this particularly confusing is that there are no previews currently uploading. Here is everything I have already tried: Deleted all App Preview videos and all screenshots Confirmed Media Manager shows no active uploads Re-uploaded App Preview videos fully compliant with Apple specs: H.264 AAC stereo audio Constant 30 FPS Correct resolution Uploaded a new build with a higher build number (Build 3) Waited more than 24 hours after upload Logged out / logged in, refreshed, tried multiple browsers and sessions Confirmed TestFlight build upload completed successfully Despite all of this, the error persists and also prevents: Adding the app for review Creating a new app version (the “Add Version” button does not appear) Apple Developer Support has suggested submitting a higher build number, which I have done, but the issue remains. At this point, it seems like a stuck / ghost App Preview upload job on the App Store Connect backend. Has anyone experienced a similar issue? If so: How was it resolved? Did Apple need to manually clear or reset something on their side? Any advice would be greatly appreciated. Thank you in advance.

Hello, I’ve been experiencing a persistent issue in Xcode since version 26.0, and it is still present in 26.2. When using the split view to display two files side by side, the area in the top‑right corner of the window (the inspector / options panel) starts flickering continuously. This happens regardless of whether I’m using the light or dark theme, and even with the Liquid Glass effect disabled in macOS settings. None of these changes have any impact on the issue. I have already submitted a bug report through Xcode (Feedback Assistant), but the issue is still present as of today. The flickering makes the interface difficult to use and visually very distracting. I’ve attached a video to clearly show the issue. I will review the attachment at the time I publish this post. Thanks in advance for any help or feedback. Video 1 https://www.icloud.com/iclouddrive/077l-R7Ybvxz89NI-B7DliEuA#xcode_bug1 Video 2 https://www.icloud.com/iclouddrive/0f6bJp48ioGRdkYiA2U4sI-cg#xcode-bug2

Following an unexpected error message while working in Xcode, the project file xcodeproj is no longer synced in iCloud Drive. The Finder shows a cloud icon with a ! and an error message : (NSFileProviderErrorDomain error -2005.) If the local file is zipped, and unzipped elsewhere on iCloud Drive, then the unzipped file can still not be iCloud Synced. Restoring the file from a Time Machine archive does not solve the issue. Apple Care Support finds that iCloud Drive is working fine except for this xcodeproj file and says the issue is Xcode related.

It seems Xcode's predictive code completion model is censored. Specifically, when typing the word "torrent," the model stops working completely. It doesn't matter whether the word is written directly in the code or in a comment. It could also be part of another word, such as "qBittorrent." In either case, the model stops working. Reproducing this issue is fairly simple. Create a Swift file and type the word "torrent." The model will stop generating code. Xcode Version 26.2 (17C52) Predictive Code Completion Model: [com.apple.fm.code.generate_small_v2.base: 700.0.81600.13.202379,0] [com.apple.fm.code.generate_safety_guardrail.base: 1.6.81619.13.202072,0] [com.apple.gm.safety_deny.input.code_intelligence.base: 32025010.20251009.91600.100.1651,0] [com.apple.gm.safety_deny.output.code_intelligence.base: 32025010.20251009.91600.100.1651,0] (Installed)

I am developing a simple watch app and I use my personal watch for development with Xcode. Personal watch is series 10 gps only. I have two other watches that I want to use for testing the app, but not needing them to be connected to Xcode. The test watches have cellular option, and I need a cell plan per watch because the watches need to be standalone, not counting initial setup. To get the standalone cell plan the watches need to be configured using AWFK. Here is what I have tried/current issues. I switch between all three watches on my phone using the watch app. Originally tried to put test watches in developer mode, thinking I would connect to Xcode, developer mode is not available when watch is setup using AWFK. Pushed the watch app to apple connect, setup TestFlight group, added the test users and my phone user, accepted invites TestFlight is installed on my phone, I see the testflight setup for the watch app I set a test watch using watch app on the phone, run install for the test app from TestFlight on the phone, spinner moves for awhile then goes back to Install. I am not able to get the watch app installed on the test watches from the phone. Is what I am attempting to do supported? I haven't found much specific documentation on this. If I pair the test watches as regular watches, set them to developer mode, can I pair them again as AWFK and will developer mode survive the switch? Or is there something really simple that I'm overlooking? Appreciate any help that can be extended.

Hi there, ever since I updated to Xcode 26.1, I have been seeing Record UI Button that is showing up on the left hand side which I believe is a new feature. Is there a way to hide this button ? I am using Vim bind with relative line numbers, and now I can't see which line number I am in when writing test cases...

Hi everyone, We run our CI builds on a Mac mini. On my local MacBook, incremental builds work properly and build times are fast, but on CI it looks like Xcode rebuilds everything from scratch every time, and the build is about 6 minutes slower than local. In Xcode 26, “compilation caching” became available. My understanding was that if DerivedData is preserved between CI runs, compilation caching / incremental builds should reduce build time. So I tried specifying the DerivedData path as an absolute path in our xcodebuild command to reuse it across builds. However, it still seems to do a full rebuild every time and the build time didn’t improve. Has anyone seen a similar issue with incremental builds on CI (Mac mini) with Xcode 26? Any advice on what to check or how to configure CI so incremental builds / caching actually work would be greatly appreciated. Thanks!

I'm starting a new project in Xcode, but the Team ID in the "Signing and Capabilities" section for iOS is different from the one on the website. Is this a problem? Why does Xcode automatically send a different ID when signing?

The latest version of Xcode available on: https://developer.apple.com/download/applications/ is Xcode 26.2 build 17C52. It was released today, December 12, 2025. However, uploads are failing with error: Validation failed. This bundle is invalid. Apple is not currently accepting applications built with this version of Xcode. I have verified my Xcode is not beta: I think that at least the non-release candidate, latest version of Xcode should be allowed to submit apps.

We’re facing an issue with Xcode 26.1 where code coverage is not being generated. All our test cases run and pass successfully, but the .xccovreport / .xccovarchive files are never produced. Code coverage is enabled in the scheme, and this setup used to work correctly in earlier Xcode versions. We are trying to determine whether this is a configuration issue on our end or a possible Xcode 26.1 bug. Is anyone else experiencing the same problem with code coverage in Xcode 26.1? Any insights or workarounds would be appreciated.

Hi, I’m seeing an unexpected change in how XCTFail behaves in UI tests after updating Xcode. I use the following helper method: `func waitForExistance(file: StaticString, line: UInt) -> Self { if !(element.exists || element.waitForExistence(timeout: Configuration.current.predicateTimeout)) { XCTFail("couldn't find element: \(element) after \(Configuration.current.predicateTimeout) seconds", file: file, line: line) return self } else { return self } }` In Xcode 16.4, this worked as expected: – when an element wasn’t found, XCTFail was triggered, but the test continued running, allowing my retry logic to execute. After updating to Xcode 26.1 / 26.2 - the test now immediately aborts after XCTFail, without executing the next retry. The logs show: `t = 113.22s Tear Down t = 113.22s Terminate com.viessmann.care:81789 *** Assertion failure in -[UITests.Tests _caughtUnhandledDeveloperExceptionPermittingControlFlowInterruptions:caughtInterruptionException:whileExecutingBlock:], XCTestCase+IssueHandling.m:273 Test Case '-[UITests.Tests test_case]' failed (114.323 seconds). Flushing outgoing messages to the IDE with timeout 600.00s Received confirmation that IDE processed remaining outgoing messages` It looks like XCTFail in Xcode 26 is now treated as an unhandled developer exception, which stops the test execution immediately, even when it’s called inside a helper method. This was not the case in earlier versions. My questions: Is this a regression in XCTest? Or an intentional change in how XCTFail behaves in newer Xcode versions? Should failures now be reported differently (e.g., using record(.init(type: .assertionFailure, …))) if I want to continue the test instead of aborting it? I would like to restore the previous behavior where the failure is logged without terminating the entire test, so my retry mechanism can still run. Has anyone else run into this after upgrading? Thanks in advance! If you’d like, I can also add recommended workarounds that actually work with Xcode 16.4 (e.g., replacing XCTFail with a non-terminating issue record).

Hi, I need help with the error: “You do not have required contracts to perform an operation.” (ID: cc897baf-6551-474b-bbef-3dd5bdf89931) When I try to distribute an archived build from Xcode, App Store Connect shows a banner asking to review a new agreement. But when I click it, I’m redirected to Agreements, Tax and Banking, and there is no agreement to accept — the page is empty. I checked with the team, and none of us can see the agreement. Is it possible that the required agreement is available only to the Account Holder and not visible to Admin or Developer roles? Could you please clarify what exactly this error means and how we can locate the missing agreement? Thanks.

Hi, I've just migrated to Swift Tools 6.2 and package traits, and I'm encountering an issue when using traits with multiple targets in the same Xcode workspace. Setup: Main iOS app target App Clip target Both consume the same local packages (e.g., UIComponents) What I'm trying to achieve: Main app imports packages without the COMPACT_BUILD trait App Clip imports packages with the COMPACT_BUILD trait enabled Package configuration (simplified): // UIComponents/Package.swift let package = Package( name: "UIComponents", platforms: [.iOS(.v18)], traits: [ .trait(name: "COMPACT_BUILD", description: "Minimal build for App Clips"), ], // ... targets: [ .target( name: "UIComponents", dependencies: [...], swiftSettings: [ .define("COMPACT_BUILD", .when(traits: ["COMPACT_BUILD"])), ] ), ] ) In the code: #if COMPACT_BUILD // Excluded from App Clip #endif The consumer packages: Main app's package imports without trait: .package(path: "../UIComponents") App Clip's package imports with trait: .package(path: "../UIComponents", traits: ["COMPACT_BUILD"]) The problem: When building the main app target, the COMPACT_BUILD compiler condition is unexpectedly active — even though the main app's dependency chain never enables that trait. It seems like the trait enabled by the App Clip target is "leaking" into the main app build. I confirmed this by adding #error("COMPACT_BUILD is active") — it triggers when building the main app, which shouldn't happen. If I disable the App Clip target from the build scheme, the main app builds correctly with COMPACT_BUILD not defined. I am also able to build the App Clip separately. Environment: Xcode 26.2 swift-tools-version: 6.2 iOS 26.2 Questions: Is this expected behavior with Xcode's SPM integration? Are traits resolved workspace-wide rather than per-target? Is there a workaround to have different trait configurations for different targets consuming the same package? Or do I need to fall back to separate package targets (e.g., UIComponents and UIComponentsCompact) to achieve this? Any guidance would be appreciated. Thanks!

We are enrolling on behalf of an organization. We do have following information with us. • Legal binding authority, • Legal entity status, • A D-U-N-S® number, and • A website. We are always getting the message as :- There may be an issue with your account that needs to be resolved before you can continue. Please contact support. This seems very generic message we are not getting the reason why we are not able to enroll for apple dev program.