Does anyone know where I can get to the API diffs for iOS 18 -> iOS 26?

After IOS 26 beta 2 installation in my iphone 13, I can't do a screenshot using assistivetouch nor touch on back.

Hi Folks, starting with iOS18 and using Xcode16, accessing fetchedProperties results in an error. I identified the issue to occur as soon as the initialization of a fetched property with external binary data storage starts. Console output during debugging: *** Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'This expression has evaluation disabled' *** First throw call stack: [...] libc++abi: terminating due to uncaught exception of type NSException Console output when trying to "print" the item via the contact menu of the debugger: Printing description of variable: error: error: Execution was interrupted, reason: internal ObjC exception breakpoint(-6).. The process has been returned to the state before expression evaluation. Message from debugger: killed The identical code works with iOS before iOS 18 (same for iPadOS 18). Does anyone observed a similar issue and figured out a solution already? Cheers, folox

Hi, In our app we are using DeviceCheck (App Attest) in a production environment iOS. The service works correctly for most users, but a user reported failure in a flow that use device check service. This failure is not intermittently, it is constant. We are unable to reproduce this failure and we are believing that this failure occurred by new version ios 26.3 because for others users using early versions the service is normally. Environment iOS 26.3 Real device App Attest capability enabled Correct App ID, Team ID and App Attest entitlement Production environment Characteristics: appears constantly affects only unique user -Don't resolves after time or reinstall not reproducible on our test devices NSError contains no additional diagnostic info (Error Domain=com.apple.devicecheck.error Code=3 "(null)") We saw about this error code 3 in this post 812308, but it's not our case because the ios version in this case is not iOS 17.0 or earlier. Please, help us any guidance for solution. Thank you

In our iOS application, we need to list available WiFi networks so that users can select one for device configuration. Here's the workflow: Initially, the hardware device acts as a WiFi Access Point (AP). The app should scan for nearby WiFi networks to detect the device's AP. The app connects temporarily to this AP and sends the selected WiFi credentials to the device. The device then connects to the selected WiFi network and stops broadcasting its AP. Is this flow achievable on iOS? We understand that Apple restricts access to WiFi scanning APIs — are there any supported methods (e.g., using NEHotspotHelper) or entitlements (such as MFi) that could enable this?

An WWDC 25 a neutral value was demonstrated that allows the Slider to be 'coloured in' from the point of the neutral value to the current thumb position. Trying to use this in Dev release 1 I get errors saying no such modifier. Was this functionality released in Dev Release 1 or am I using it incorrectly?

I currently have a iOS app live on the App Store but I also want to release it on Android, the whole code is in Swift so would that be possible or would I have to rewrite my whole apps code in a different coding language.

Hi Apple engineers! We are making an iOS browser and are planing to deliver a feature that allows enterprise customers to use a MAM key to set a PAC file for proxy. It's designed to support unmanaged device so the MDM based solutions like 'Global HTTP Proxy MDM payload' or 'Per-App VPN' simply don't work. After doing some research we found that with WKWebView, the only framework allowed on iOS for web browsing, there's no API for programmatically setting proxy. The closes API is the WKURLSchemeHandler, but it's for data management not network request interception, in other word it can not be used to handle HTTP/HTTPS request well. When we go from the web-view level to the app level, it seems there's no API to let an app set proxy for itself at an app-level, the closest API is Per-App VPN but as mentioned above, Per-App VPN is only available for managed device so we can't use that as well. Eventually we go to the system level, and try to use Network Extension, but there's still obstacles. It seems Network Extension doesn't directly provide a way to write system proxy. In order to archive that, we may have to use Packet Tunnel Provider in destination IP mode and create a local VPN server to loop back the network traffic and do the proxy stuff in that server. In other word, the custom VPN protocol is 'forward directly without encryption'. This approach looks viable as we see some of the network analysis tools use this approach, but still I'd like to ask is this against App Store Review Guidelines? If the above approach with Network Extension is not against App Store Review Guidelines, I have a further question that, what is the NEProxySettings of NETunnelNetworkSettings for? Is it the proxy which proxies the VPN traffic (in order to hide source IP from VPN provider) or it is the proxy to use after network traffic goes into the virtual private network? If none of the above is considered recommended, what is the recommended way to programmatically set proxy on WKWebView on an unmanaged device (regardless of where the proxy runs, web-view/app/system)?

Hi, I'm currently working on an app made originally for iOS 15. On it, I add an observer on viewDidLoad function of my ViewController to listen for changes on the UserDefault values for connection settings. NotificationCenter.default.addObserver(self, selector: #selector(settingsChanged), name: UserDefaults.didChangeNotification, object: nil) Said values can only be modified on the app's section from System Settings. Thing is, up to iOS 17, the notification fired as expected, but starting from iOS 18, the notification doesn't seem to be sent by the OS. Is there anything I should change in my observer, or any other technique to listen for the describe event? Thanks in advance.

From https://developer.apple.com/forums/thread/803945?answerId=862153022#862153022, the testing of Age Range API was not available through xcode simulator back in Oct 2025. Is this available now? In particular: Is requestAgeRange testing available through simulator? Is requestAgeRange testing with sandbox account available through simulator? Is isEligibleForAgeFeatures available through simulator? Is isEligibleForAgeFeatures testing with sandbox account available through simulator? If the answer is "yes" to any of the above, which version of the xcode and ios version should I use? So far I didn't get any of the above working on the simulator, and I can't find any documentation on the answers above. Thank you!

As part of the WWDC25 Keynote, a technology was announced that can present 2D images as 3D spatial scenes. This announcement is supported by a Press Release. ...developers can use the Spatial Scene API to make their app experience even more immersive. Zillow is taking advantage of the API for their Zillow Immersive app, allowing users to see images of homes and apartments with the rich depth and dimension that spatial scenes offer. The feature also appears in the Photos App on iOS 26 Developer Beta 1. Tapping "Spatial Scene" on any photo opens a view of that photo with a parallax effect. I've searched the WWDC sessions and new documentation and have come up short. Reaching out here for help. Is there any documentation for Spatial Scene API? Or any guidance on how to implement the spatial scene in iOS?

So I downloaded and installed iOS26 on my iPhone 15 Pro and after that it does not want to boot anymore. It shows a battery with one red line. Which is weird because before it restarted it had 80% of the battery and I had the power cable connected at all time. Now I can't boot it up anymore. Not even with the volume button up, down, power button trick. Please help!

I’m facing an issue in our native iOS app that occurs specifically on iOS 26.1 (not observed on any lower versions). When I update a @State field value, the UI does not reflect the change as expected. The @State variable updates internally, but the view does not re-render. This behaviour started after upgrading to iOS 26.1. Works fine on iOS 26.0 and earlier versions. Has anyone else encountered this issue or found a workaround? Any insights or suggestions would be greatly appreciated.

I am working on capturing 48MP images using the iPhone 16 Pro Max with the Ultra-wide camera. I’ve updated the code to capture the maximum supported dimensions with the following snippet: if #available(iOS 16.0, *) { photoOutput.maxPhotoDimensions = device.activeFormat.supportedMaxPhotoDimensions.last! photoSettings.maxPhotoDimensions = .init(width: 5712, height: 4284) } However, I’m still not getting the expected results. My goal is to capture 48MP images, and I want to confirm if the Ultra-wide camera supports this resolution or if I’m missing any other configuration. Any guidance would be appreciated!

My company has a server that supports ticket-based TLS session resumption (per RFC 5077). We have done Wireshark captures that show that our iOS client app, which uses URLSession for REST and WebSocket connections to the server, is not sending the TLS "session_ticket" extension in the Client Hello package that necessary to enable ticket-based resumption with the server. Is it expected that URLSession does not support ticket-based TLS session resumption? If "yes", is there any way to tell URLSession to enable ticket-based session resumption? the lower-level API set_protocol_options_set_tls_tickets_enabled() hints that the overall TLS / HTTP stack on IOS does support ticket-based resumption, but I can't see how to use that low-level API with URLSession. I can provide (lots) more technical details if necessary, but hopefully this is enough context to determine whether ticket-based TLS resumption is supported with URLSession. Any tips / clarifications would be greatly appreciated.

Hi Apple Developer Forums, I’m developing an iOS camera app that processes RAW captures using Core Image. I’m seeing a large “first use” performance penalty specifically when creating the CIImage from CIRAWFilter.outputImage. What’s slow (important detail) I’m measuring the time for: let rawFilter = CIRAWFilter(imageData: rawData, identifierHint: hint) let ciImage = rawFilter.outputImage This is not CIContext.render(...) / createCGImage(...). It’s just the time to access outputImage (i.e., building the Core Image graph / RAW pipeline setup). Observed behavior First time accessing CIRAWFilter.outputImage: ~3 seconds Second time (same app session, similar RAW): ~3 milliseconds So something heavy is happening only on first use (decoder initialization, pipeline setup, shader/library compilation, caching, etc.). Using Metal System Trace, I also noticed that during the slow first call there are many “Create MTLLibrary” events, while the second call doesn’t show this pattern. Warm-up attempts using bundled DNG I tried to “warm up” early (e.g., on camera screen entry) by loading a bundled DNG and then accessing CIRAWFilter.outputImage by taking a photo: Warm-up with a ~247 KB DNG → first real RAW outputImage cost drops to ~1.42s Warm-up with a ~25 MB DNG → first real RAW outputImage cost drops to ~843ms This helps, but it’s still far from the steady-state ~3ms. Warm-up by capturing a real RAW (works, but concerns) The only method that fully eliminates the delay is to trigger a real RAW capture programmatically before the user’s first photo, then use that captured rawData to warm up the CIRAWFilter.outputImage path. This brings the first user-facing capture close to the steady-state timing. However: In some regions, the camera shutter sound cannot be suppressed, so “hidden warm-up capture” is unacceptable UX. I’m also unsure whether triggering a real capture without an explicit user action could raise compliance/privacy concerns, even if the image is immediately discarded and never saved/uploaded. Questions Is the large first-time cost of CIRAWFilter.outputImage expected (RAW pipeline initialization / shader compilation)? Is there an Apple-recommended way to pre-initialize the Core Image RAW pipeline / Metal resources so the first outputImage is fast, without taking a real photo? Are there any best practices (e.g. CIContext creation timing, prepareRender(...), specific options) that reliably reduce this first-use overhead for CIRAWFilter? Attachments Figure 1: First RAW capture with no warm-up (~3s outputImage time) Figure 2: First RAW capture after warm-up with bundled DNG (improved but still hundreds of ms) Thanks for any guidance or experience sharing!

Hello, I have a question about data deserialization using NSKeyedUnarchiver in iOS SDK development. Current Situation: Previously, we were using the NSKeyedUnarchiver.unarchiveObject(with: Data) function We have changed to using the NSKeyedUnarchiver.unarchivedObject(ofClasses:from:) method to deserialize complex objects stored in UserDefaults We need to include all types in the ofClasses parameter, including Swift primitive types as well as various custom classes and structs within the project Questions: Implementation Approach: Is it correct pattern to include all classes defined in the project in the ofClasses array? Is this approach recommended? Runtime Stability: When using this approach, is there a possibility of runtime crashes? Are there any performance issues? Alternative Methods: If the current approach is not the correct pattern, what alternatives should we consider? Current Code Structure: All model classes conform to the NSSecureCoding protocol We use the requiringSecureCoding: true parameter We use a whitelist approach, explicitly listing only allowed classes I would like to know if this structure is appropriate, or if we should consider a different approach. Thank you.

I’m seeing a layout issue in SwiftUI on iOS 26 that only reproduces with specific Accessibility Motion settings. Steps to reproduce 1. Open Settings → Accessibility → Motion. 2. Enable Reduce Motion and Prefer Cross-Fade Transitions. 3. Launch an app with a SwiftUI TextField. 4. Tap the field to show the keyboard. 5. Dismiss the keyboard (tap outside, swipe down, etc.). Expected: After the keyboard is dismissed, the view’s bottom safe area / layout should return to normal. Actual: The view continues to reserve space equal to the keyboard height — as if the keyboard were still visible. UI anchored to the safe area remains shifted upward until the view is reloaded.

I have recently been having trouble with my iOS 18.2 beta update. It has been 2 weeks since I have updated to iOS 18.2 beta and joined the Genmoji and image playground waitlist. I am wondering how much longer I have to wait till my request is approved.

I am experiencing a critical issue with WKWebView navigation in iOS 18.2 beta, specifically regarding the function webView.loadFileURL(_:allowingReadAccessTo:). In previous versions of iOS, this function works as expected when loading valid file URLs from the app’s local directory (e.g., Application Support). However, in iOS 18.2 beta, the function fails to complete the navigation, producing a provisional navigation failure with WebKitErrorDomain, code 102 (Frame load interrupted). This issue severely impacts our app’s ability to load essential local resources, breaking core functionality. Here’s a summary of the troubleshooting steps and findings: File and Directory Verification: The url provided to loadFileURL is valid. Both the file path and parent directory exist within the app’s sandbox, and the directory is accessible. Configuration: The code specifies the parent directory in the allowingReadAccessTo parameter to meet sandboxing requirements, which works on iOS 18.1 and prior releases. Testing on Stable iOS Versions: The issue is exclusive to iOS 18.2 beta; testing on earlier stable iOS releases confirms that the function works as intended. Impact: This regression severely disrupts the app’s navigation and content loading, effectively blocking access to local resources required for the WKWebView to display content properly. The error log returned in the console is as follows: > Error Domain=WebKitErrorDomain Code=102 "Frame load interrupted" UserInfo={_WKRecoveryAttempterErrorKey=<WKReloadFrameErrorRecoveryAttempter: 0x303dd67e0>, NSErrorFailingURLStringKey=file:///var/mobile/Containers/Data/Application/4D128818-7E51-460E-B5D4-D2D70363EFA0/Library/, NSErrorFailingURLKey=file:///var/mobile/Containers/Data/Application/4D128818-7E51-460E-B5D4-D2D70363EFA0/Library/, NSLocalizedDescription=Frame load interrupted} We suspect this may be due to a change in WebKit permissions in iOS 18.2 beta that affects local file handling within WKWebView. Given that the our app relies heavily on these resources, we kindly request this issue be addressed promptly. If any additional information or sample code is required, please let us know, and we will gladly provide further details to assist in resolving this issue. Thank you for your attention and support. Best regards, Isabela