I am attempting to integrate VisionOS support into my existing iOS app, which utilizes Swift UI and CocoaPods. However, upon adding VisionOS as a supported platform and attempting to run the app, I encounter two errors: "'jot/jot.h' file not found" at "/Users/xxxxxx/Desktop/IOS_DEVELOPMENT/iOS/xxxxxxxxx/xxxxxxxxx-Bridging-Header.h:17:9". "Failed to emit precompiled header" at "/Users/xxxxxx/Library/Developer/Xcode/DerivedData/xxxxxxxxx-bnhvaxypgfhmvqgklzjdnxxbrdhu/Build/Intermediates.noindex/PrecompiledHeaders/xxxxxxxxx-Bridging-Header-swift_6TTOG1OAZB5F-clang_21TRHDW14EDOZ.pch" for bridging header "/Users/xxxxxxxx/Desktop/IOS_DEVELOPMENT/iOS/xxxxxxx/xxxxxxxx-Bridging-Header.h". I'm seeking assistance with resolving these errors. Below is my Podfile configuration: source 'https://github.com/CocoaPods/Specs.git' platform :ios, '15.0' target 'xxxxxxxxxx' do use_frameworks! pod 'RealmSwift' pod 'JGProgressHUD' pod 'BadgeLabel' pod 'jot' pod 'MaterialComponents/Chips' pod 'GoogleMaps' pod 'Firebase/Crashlytics' pod 'Firebase/Analytics' # Firebase pod for Google Analytics # Add pods for any other desired Firebase products # https://firebase.google.com/docs/ios/setup#available-pods end post_install do |installer| installer.pods_project.targets.each do |target| target.build_configurations.each do |config| config.build_settings['IPHONEOS_DEPLOYMENT_TARGET'] = '15.0' end end end Any assistance in resolving these errors would be greatly appreciated.

I am attempting to integrate VisionOS support into my existing iOS app, which utilizes Swift UI and CocoaPods. However, upon adding VisionOS as a supported platform and attempting to run the app, I encounter two errors: "'jot/jot.h' file not found" at "/Users/xxxxxx/Desktop/IOS_DEVELOPMENT/iOS/xxxxxxxxx/xxxxxxxxx-Bridging-Header.h:17:9". "Failed to emit precompiled header" at "/Users/xxxxxx/Library/Developer/Xcode/DerivedData/xxxxxxxxx-bnhvaxypgfhmvqgklzjdnxxbrdhu/Build/Intermediates.noindex/PrecompiledHeaders/xxxxxxxxx-Bridging-Header-swift_6TTOG1OAZB5F-clang_21TRHDW14EDOZ.pch" for bridging header "/Users/xxxxxxxx/Desktop/IOS_DEVELOPMENT/iOS/xxxxxxx/xxxxxxxx-Bridging-Header.h". I'm seeking assistance with resolving these errors. Below is my Podfile configuration: source 'https://github.com/CocoaPods/Specs.git' platform :ios, '15.0' target 'xxxxxxxxxx' do use_frameworks! pod 'RealmSwift' pod 'JGProgressHUD' pod 'BadgeLabel' pod 'jot' pod 'MaterialComponents/Chips' pod 'GoogleMaps' pod 'Firebase/Crashlytics' pod 'Firebase/Analytics' # Firebase pod for Google Analytics # Add pods for any other desired Firebase products # https://firebase.google.com/docs/ios/setup#available-pods end post_install do |installer| installer.pods_project.targets.each do |target| target.build_configurations.each do |config| config.build_settings['IPHONEOS_DEPLOYMENT_TARGET'] = '15.0' end end end Any assistance in resolving these errors would be greatly appreciated.

Firstly, everything is ok. I have been connected Apple Vision Pro device to the Xcode via wireless network, also build my app in past several weeks. But since yesterday, I can not connect Apple Vision Pro device to my Xcode anymore. The device did not listed in Devices and Simulators window. I have tried: Update my Xcode to 15.3 Reboot my Mac and Apple Vision Pro Reset Apple Vision Pro also erase all data Other Macs in the same network also did not list any Vision Pro device I'm sure Vision Pro and Mac are in the same network, and it worked before. I go to Settings - General - Remote Devices, and open Xcode's Devices and Simulators window, still can't see any Apple Vision Pro device.

Today I have tried to add a second archive action for visionOS. I had added a visionOS destination to my app target a while back and can build and archive my app for visionOS in Xcode 15.3 locally, and also run it on the device. Xcode Cloud is giving me the following errors in the Archive - visionOS action (Archive - iOS works): Invalid Info.plist value. The value for the key 'DTPlatformName' in bundle MyApp.app is invalid. Invalid sdk value. The value provided for the sdk portion of LC_BUILD_VERSION in MyApp.app/MyApp is 17.4 which is greater than the maximum allowed value of 1.2. This bundle is invalid. The value provided for the key MinimumOSVersion '17.0' is not acceptable. Type Mismatch. The value for the Info.plist key CFBundleIcons.CFBundlePrimaryIcon is not of the required type for that key. See the Information Property List Key Reference at https://developer.apple.com/library/ios/documentation/general/Reference/InfoPlistKeyReference/Introduction/Introduction.html#//apple_ref/doc/uid/TP40009248-SW1 All 4 errors are annotated with "Prepare Build for App Store Connect" and I get them for both "TestFlight (Internal Testing Only)" and "TestFlight and App Store" deployment preparation options. I have tried to remove the visionOS destination and add it back, but this is not changing the project at all. Any ideas what I am missing?

I have a unity scene which i have created for vision pro and i have also created a biomatric authentication application for vision os using Xcode and swift. What i want to do is call unity scene after the authentication has taken place form the xcode. now i have seen medium post but it only shows how we can do that for apps, I am not bale to do that for vision Pro I have followed this post : https://medium.com/mop-developers/launch-a-unity-game-from-a-swiftui-ios-app-11a5652ce476 All this i am doing because as far as i know Apple vision pro is not currently supporting optic id authentication with unity's polyspatial plugin. Any help on this will be appreciated. Thank you in advace.

I'm taking my iOS/iPadOS app and converting it so it runs on visionOS. I’m trying to compile my app, build it, for both visionOS and iOS. When I try to build for an iPhone and iPad simulator, I get the following error:  Building for 'iphonesimulator', but realitytool only supports [xros, xrsimulator] I’m thinking I might need to do a # if conditional compilation statement for visionOS so iOS doesn’t try to build lines of code but I can’t for this particular error find out for which file or code I need to do the conditional compilation. Anyone know how to get rid of this error? 

I am developing an iPhone app, but I've been targeting the AVP, as well. In fact, since I got the AVP, I've mainly be building and running my app on it. This morning, I had an upgrade to Xcode 15.4 (15F31d). Ever since I have not been able to see my AVP as a run destination. It does show up in the device list, although there are no provisioning files on it for some reason. But I can't target it for building. I've tried unpairing and turning developer mode off and on. Has anyone else seen this problem after upgrading Xcode? Any help is appreciated.

I want to run my custom application on my VisionPro. I have paired my VisionPro with Xcode successfully but when I am running it it shows me to enable developer mode in VisionPro. When I followed the options and Went to Settings -> Privacy & Security. There is no developer mode option visible at any place. Please let me know how I can enable the developer option in VisionPro. Thanks

In visionOS simulator, a ContactPicker for Multiple contacts selection is shown without the Done button. Can I assume this behavior will be OK on an actual Vision Pro? I could not get a list of contacts to be selected. On iOS, the Done button is shown ok as follows: import ContactsUI import Combine struct ContactPickerView: View { @State private var pickedNumber: String? @StateObject private var coordinator = Coordinator() var body: some View { VStack { Button("Open Contact Picker") { openContactPicker() } .padding() Text(pickedNumber ?? "") .padding() } .onReceive(coordinator.$pickedNumber, perform: { phoneNumber in self.pickedNumber = phoneNumber }) .environmentObject(coordinator) } func openContactPicker() { let contactPicker = CNContactPickerViewController() contactPicker.delegate = coordinator let scenes = UIApplication.shared.connectedScenes let windowScenes = scenes.first as? UIWindowScene let window = windowScenes?.windows.first window?.rootViewController?.present(contactPicker, animated: true, completion: nil) } class Coordinator: NSObject, ObservableObject, CNContactPickerDelegate { @Published var pickedNumber: String? func contactPicker(_ picker: CNContactPickerViewController, didSelect contacts: [CNContact]){ print(contacts) contacts.forEach { contact in for number in contact.phoneNumbers { let phoneNumber = number.value print("number is = \(phoneNumber)") } } } } }

I’m trying to add screenshot for my new app, I did it the same way I have been doing this and it seems like there’s a issue with the website causing it to say that the images are still processing after hitting add to review. Is anyone having this issue, I’ve been trying on 3 different apple devices since 6pm EST.

We tested our iOS app on visionOS and found that the hover effect works on most of UIKit views, but it does not work on most of SwiftUI views. SwiftUI views are used within UIHostingController. I created a new project (Storyboard based iOS app) and displayed the following SwiftUI view in UIHostingController and found that the buttons in the List were highlighted, but not the standalone buttons. struct SwiftUIView: View { var body: some View { List { // This button has the hover effect. Button { print("Hello") } label: { Text("Hello") } } // This button does't have the hover effect. Button { print("Hello") } label: { Text("Hello") } .hoverEffect() } } Is there a way to highlight any SwiftUI view?

Hi, we've been developing an iOS game using OpenGL ES, trying running compatible iOS app on Vision Pro Simulator on M1 Mac, but we met a strange EXC_BAD_ACCESS crash in glDrawElements(), while the app run normally on ios or ipad simulators with the same developing environment. The stack like following: Our Mac is a Mac Studio(2022) with Apple M1 Max and MacOS 14.1.2. Xcode: Version 15.3 (15E204a) Simulator OS: Vision OS 1.1

Hi All, I am trying to build a new iOS app by following https://developer.apple.com/videos/play/wwdc2024/10163/?time=67 When I trying to remove all legacy VN I am getting error, I would appreciate if someone can help me get up to speed with the new Vision API

I have an application made from Flutter, which is possible to run on VisionOS by running as design to Ipad, and I would like that inside this application would be possible to go to mixed reality somehow. I am trying to do so far was to embedded the vision project that I have inside the swift application that flutter generates, but in this attempt I got an error from Xcode telling me that this way is not possible. I wonder if is there an another way that I could achieve my goal?

Hi team, Our app is going to upgrade the backend infrastructure which needs to inform an announcement to the users. It seems there is a limitation that doesn't allow a message related to the decommissioning put up on the App's home page. I have check some docs over internet but still not found any official one specify this topic. Can we just put the message as mentioned above or there is actually a limit which not allow to add it in? Thanks

navigationController.popToRootViewController(animated: true) does not work on Xcode 16 / iOS 18 Simulator. However, setting animated: to false works fine. This is only happening on iOS 18 / Xcode 16.