Some Macs recently received a macOS system update which disabled the simulator runtimes used by Xcode 15, including the simulators for iOS, tvOS, watchOS, and visionOS. If your Mac received this update, you will receive the following error message and will be unable to use the simulator: The com.apple.CoreSimulator.SimRuntime.iOS-17-2 simulator runtime is not available. Domain: com.apple.CoreSimulator.SimError Code: 401 Failure Reason: runtime profile not found using "System" match policy Recovery Suggestion: Download the com.apple.CoreSimulator.SimRuntime.iOS-17-2 simulator runtime from the Xcode To resume using the simulator, please reboot your Mac. After rebooting, check Xcode Preferences → Platforms to ensure that the simulator runtime you would like to use is still installed. If it is missing, use the Get button to download it again. The Xcode 15.3 Release Notes are also updated with this information.

Since a combined upgrade to macOS 26.4 and Xcode 26.4 I am plagued by .DS_Store and UserInterfaceState files appearing in my repository list of uncommitted changes. This is preventing commits and merging etc. I have added the following list to both the .gitignore_global file via directly editing the file and also the Xcode>Settings>Git Settings>Ignore Files # Mac OS X .DS_Store # Xcode *.pbxuser *.mode1v3 *.mode2v3 *.perspectivev3 *.xcuserstate UserInterfaceState.xcuserstate project.xcworkspace/ xcuserdata/ # Generated files *.o *.pyc # Build directories DerivedData/ build/ # CocoaPods Pods/ # Carthage Carthage/ # Other *.swp *.lock This has been to no avail. I have raised Feedback FB22370688 for this issue. It has been marked as no similar reports which is odd because there are a lot of mentions of the .DS_Store files appearing in Git and also of problems with the ignore settings of Git. For a while, I successfully prevented the .DS_Store files from showing up as uncommitted changes but now they are back again. I did a git status on the project and got this output for a while Changes not staged for commit: (use "git add <file>..." to update what will be committed) (use "git restore <file>..." to discard changes in working directory) modified: Target Analysis.xcodeproj/project.xcworkspace/xcuserdata/myuserid.xcuserdatad/UserInterfaceState.xcuserstate Ignored files: (use "git add -f <file>..." to include in what will be committed) Target Analysis iOS/ Target Analysis macOS/ Views/Testing/.DS_Store Now, in Xcode it looks like this So the .DS_Store files are no longer being ignored. I have raised an Apple Developer Tech Support (DTS) Question as I have exhausted every avenue that I could find. DTS said to just remove the file(s) in Git. Neither this nor the .gitignore_global file are fixing the problem. This all just seems to be so unnecessarily difficult especially as many others have faced the same problem.

In Interface Builder there use to be a segmented control to switch Inspectors. It's been this way forever. I could switch from: File Inspector Attributes Inspector Size Inspector Etc... Now in Xcode 26.4, it is this clunky pop up button? What? I thought Apple didn't like Interface Builder anymore so I'm surprised they are even touching it. This part of a SwiftUI rewrite or just bad vibes?

My app targets iOS 12.0 and crashes immediately on launch when installed via TestFlight on an iPad running iOS 12.x. The same archive works perfectly when installed via Ad Hoc distribution or directly from Xcode. This is a regression — the exact same source code, compiled with the same Xcode version, was successfully distributed via TestFlight and the App Store last month (March 2026) without issues. No changes were made to the code, Xcode version, or signing configuration. Steps to reproduce: Archive an app with IPHONEOS_DEPLOYMENT_TARGET = 12.0 using Xcode 16.4 Upload to App Store Connect Install via TestFlight on an iPad running iOS 12.x App crashes immediately on launch (pre-main, no crash log generated) Expected: App launches normally (as it did last month) Actual: App is killed immediately, process exits with reason: (none) Console.app shows the process never transitions from xpcproxy to the actual binary — it dies within ~260ms of bootstrap, indicating a dyld or app thinning issue. Environment: Xcode: 16.4 Deployment target: iOS 12.0 ENABLE_BITCODE: NO Device: iOS 12.x Ad Hoc install: WORKS Xcode direct install: WORKS TestFlight install: CRASHES App Store install: CRASHES Anyone else seeing this?

Hi everyone, I'm building an app in Xcode 16.4 with a minimum deployment target of iOS 12. The last time I built with this configuration was November 2025 — that build worked perfectly fine. I'm aware that builds from Xcode 16.4 will no longer be accepted by Apple after April 28, 2026, so I decided to push one final update before that deadline. Here's what I did: Built the app with no changes to build settings Uploaded to TestFlight Tested on iOS 12, iOS 26, and a few other versions — everything looked good Passed App Review Published to the App Store Now users on iOS 12 are reporting that the app crashes immediately on launch. Users on iOS 13-26 are unaffected. We've effectively lost a significant portion of our users overnight. We'd really like to restore functionality for them before April 28 — after that we plan to raise the minimum deployment target anyway. There are no crash logs available, as the app appears to never reach application code at all. Below are the relevant logs from Console.app: default 16:33:49.012231+0400 SpringBoard Bootstrapping MY_BUNDLE_ID with intent foreground-interactive error 16:33:49.021533+0400 SpringBoard [MY_BUNDLE_ID] Bootstrap failed with error: <NSError: 0x280f59aa0; domain: BKSProcessErrorDomain; code: 1 (bootstrap-failed); reason: "Failed to start job"> error 16:33:49.021748+0400 SpringBoard Bootstrapping failed for <FBApplicationProcess: 0x101cb4070; MY_BUNDLE_ID; pid: -1> with error: Error Domain=BKSProcessErrorDomain Code=1 "Unable to bootstrap process with bundleID MY_BUNDLE_ID" UserInfo={NSLocalizedDescription=Unable to bootstrap process with bundleID MY_BUNDLE_ID, BKSProcessExitReason=0, NSLocalizedFailureReason=Failed to start job, NSUnderlyingError=0x280f58780 {Error Domain=NSPOSIXErrorDomain Code=3 "No such process" UserInfo={NSLocalizedFailureReason=The process failed to exec, NSLocalizedRecoverySuggestion=Consult /var/log/com.apple.xpc.launchd/launchd.log for more information, NSLocalizedDescription=Unable to get valid task name port right for pid 241}}, BSErrorCodeDescription=bootstrap-failed} default 16:33:49.021934+0400 SpringBoard Adding: <FBApplicationProcess: 0x101cb4070; MY_BUNDLE_ID; pid: -1> default 16:33:49.022111+0400 SpringBoard <FBApplicationProcess: 0x101cb4070; MY_BUNDLE_ID; pid: -1> exited. default 16:33:49.023325+0400 SpringBoard Removing: <FBApplicationProcess: 0x101cb4070; MY_BUNDLE_ID; pid: -1> default 16:33:49.039576+0400 assertiond Submitting new job for "MY_BUNDLE_ID" on behalf of <BKProcess: 0x100d119f0; SpringBoard; com.apple.springboard; pid: 48; agency: SystemShell; visibility: foreground; task: running> default 16:33:49.039982+0400 assertiond Submitted job with label: UIKitApplication:MY_BUNDLE_ID[0xed03][58] error 16:33:49.040128+0400 assertiond Unable to obtain a task name port right for pid 241: (os/kern) failure (0x5) error 16:33:49.040286+0400 assertiond Failed to start job with error <NSError: 0x100c3f180; domain: NSPOSIXErrorDomain; code: 3; reason: "The process failed to exec"> { description = "Unable to get valid task name port right for pid 241"; failureReason = "The process failed to exec"; recoverySuggestion = "Consult /var/log/com.apple.xpc.launchd/launchd.log for more information"; Has anyone encountered this recently? Any help would be greatly appreciated. P.S. I tried rebuilding from scratch without any code changes and uploading a fresh build to TestFlight — but now it won't even launch from TestFlight on iOS 12.

I am facing an intermittent problem where iPhones are failing to pair/connect with Xcode under Xcode -> Windows -> Devices and Simulators. This happens when more than one web content filters are present, for instance, I have my web content filter (FilterSockets true, FilterGrade Firewall) and there is also Sentinel One web content filter with same configuration. Note: We are not blocking any flow from remoted / remotepairingd / core device service / MDRemoteServiceSupport etc processes. But they do get paused and resumed at times for our internal traffic verification logic. So, we are trying to understand what impact our content filter may be having on this iPhone Pairing?? If we stop either one of the filters the problem goes away. I have tracked the network traffic to the phone, and it seems to be using a ethernet interface (en5/en10) over the USB-C cable. I can see endpoints like this: localEndpoint = fe80::7:afff:fea1:edb8%en5.54442 remoteEndpoint = fe80::7:afff:fea1:ed47%en5.49813 I also see remoted process has the below ports open : sudo lsof -nP -iTCP -iUDP | grep remoted remoted 376 root 4u IPv6 0xce4a89bddba37bce 0t0 TCP [fe80:15::7:afff:fea1:edb8]:57395->[fe80:15::7:afff:fea1:ed47]:58783 (ESTABLISHED) remoted 376 root 6u IPv6 0xf20811f6922613c7 0t0 TCP [fe80:15::7:afff:fea1:edb8]:57396 (LISTEN) remoted 376 root 7u IPv6 0x2c393a52251fcc56 0t0 TCP [fe80:15::7:afff:fea1:edb8]:57397 (LISTEN) remoted 376 root 8u IPv6 0xcb9c311b0ec1d6a0 0t0 TCP [fd6e:8a96:a57d::2]:57398 (LISTEN) remoted 376 root 9u IPv6 0xc582859e0623fe4e 0t0 TCP [fd6e:8a96:a57d::2]:57399 (LISTEN) remoted 376 root 10u IPv6 0x2f7d9cee24a44c5b 0t0 TCP [fd6e:8a96:a57d::2]:57400->[fd6e:8a96:a57d::1]:60448 (ESTABLISHED) remoted 376 root 11u IPv6 0xbdb7003643659de 0t0 TCP [fd07:2e7e:2a83::2]:57419 (LISTEN) remoted 376 root 12u IPv6 0x569a5b649ff8f957 0t0 TCP [fd07:2e7e:2a83::2]:57420 (LISTEN) remoted 376 root 13u IPv6 0xa034657978a7da29 0t0 TCP [fd07:2e7e:2a83::2]:57421->[fd07:2e7e:2a83::1]:61729 (ESTABLISHED) But due to the dynamic nature of port and IPs used we are not able to decide on an effective early bypass NEFilterRule. We don't want to use a very broad bypass criteria like all link local IPs etc. Any help will be greatly appreciated.

Hi everyone, I’m currently developing an iOS app using React Native and implementing consumable In-App Purchases (IAP). I'm facing an issue where getProducts returns an empty array without any error messages when testing on a TestFlight build. I have already completed the following setup: Agreements, Tax, and Banking: All forms are signed and the status is "Active" in App Store Connect. Product Configuration: The Consumable product is created in App Store Connect with the status "Ready to Submit". App Store Connect Integration: The product is correctly linked under the "In-App Purchases and Subscriptions" section of the App version. Xcode Capability: The "In-App Purchase" capability has been added to the project. Implementation: The Product ID in my React Native code (using react-native-iap) matches the ID in App Store Connect exactly. Despite these steps, the product list remains empty. Are there any hidden requirements or specific configurations for TestFlight that I might have missed? Any guidance would be greatly appreciated. Thanks!

When opening a project or workspace in Xcode 26.4 the most recently active scheme is not restored. Instead, the scheme reverts to the first scheme in the list. I've tried opening and closing Xcode a few times, and removing the user data for a workspace. No luck. Any suggestions or workarounds?

Since I have downloaded latest Xcode version I am having Project Navigator in the Menu Style UI and not in the Tab based UI, the one earlier. Also, I am not able to find any options to change Project Navigator style. Please provide user the option to change UI to either Menu based or Tab based Project Navigator UI ( Projects, Source Control, Bookmark, find etc )

I have an app I am working on that makes a REST call, updates the UI with the info, and sends a notification. When I run Build and Run my app from Xcode using my iPhone as the destination, it works exactly as I want it to - my REST calls and notifications continue to work when the app is in the background. However, when I run my app that has been installed on my iPhone from the Xcode build/run directly (without Xcode in the picture), it does NOT behave correctly and only works when my app is in the foreground. What am I missing?

Since I have changed of iPhone (yesterday) to run my draft application, I systematically, and instantaneously get a message "The application failed to launch.", i.e. the application successfully built and was downloaded to the new iPhone (Iphone 17 pro - iOS 26.4). I have checked that this new iPhone is well registered on my list of authorized devices. Could you help me to fix this issue ? Here is the verbose attached to the failure: The application failed to launch. Domain: com.apple.dt.CoreDeviceError Code: 10002 User Info: { BundleIdentifier = "com.laurent-guise.ble-laser"; DVTErrorCreationDateKey = "2026-03-30 07:59:46 +0000"; IDERunOperationFailingWorker = IDELaunchCoreDeviceWorker; } The request to open "com.laurent-guise.ble-laser" failed. Domain: FBSOpenApplicationServiceErrorDomain Code: 1 Failure Reason: The request was denied by service delegate (SBMainWorkspace). User Info: { BSErrorCodeDescription = RequestDenied; FBSOpenApplicationRequestID = 0x3868; } The operation couldn’t be completed. The process failed to launch. Domain: FBProcessExit Code: 64 Failure Reason: The process failed to launch. User Info: { BSErrorCodeDescription = "launch-failed"; } The operation couldn’t be completed. Launch failed. Domain: RBSRequestErrorDomain Code: 5 Failure Reason: Launch failed. Launchd job spawn failed Domain: NSPOSIXErrorDomain Code: 85 Failure Reason: Bad executable (or shared library) Event Metadata: com.apple.dt.IDERunOperationWorkerFinished : { "device_identifier" = "00008150-000E19E814A1401C"; "device_isCoreDevice" = 1; "device_model" = "iPhone18,1"; "device_osBuild" = "26.4 (23E246)"; "device_osBuild_monotonic" = 2304024600; "device_os_variant" = 1; "device_platform" = "com.apple.platform.iphoneos"; "device_platform_family" = 2; "device_reality" = 1; "device_thinningType" = "iPhone18,1"; "device_transport" = 0; "launchSession_schemeCommand" = Run; "launchSession_schemeCommand_enum" = 1; "launchSession_targetArch" = arm64; "launchSession_targetArch_enum" = 6; "operation_duration_ms" = 6590; "operation_errorCode" = 1; "operation_errorDomain" = "com.apple.dt.CoreDeviceError.10002.FBSOpenApplicationServiceErrorDomain"; "operation_errorWorker" = IDELaunchCoreDeviceWorker; "operation_error_reportable" = 1; "operation_name" = IDERunOperationWorkerGroup; "param_consoleMode" = 1; "param_debugger_attachToExtensions" = 0; "param_debugger_attachToXPC" = 1; "param_debugger_type" = 3; "param_destination_isProxy" = 0; "param_destination_platform" = "com.apple.platform.iphoneos"; "param_diag_MTE_enable" = 0; "param_diag_MainThreadChecker_stopOnIssue" = 0; "param_diag_MallocStackLogging_enableDuringAttach" = 0; "param_diag_MallocStackLogging_enableForXPC" = 1; "param_diag_allowLocationSimulation" = 1; "param_diag_checker_mtc_enable" = 1; "param_diag_checker_tpc_enable" = 1; "param_diag_gpu_frameCapture_enable" = 0; "param_diag_gpu_shaderValidation_enable" = 0; "param_diag_gpu_validation_enable" = 0; "param_diag_guardMalloc_enable" = 0; "param_diag_memoryGraphOnResourceException" = 0; "param_diag_queueDebugging_enable" = 1; "param_diag_runtimeProfile_generate" = 0; "param_diag_sanitizer_asan_enable" = 0; "param_diag_sanitizer_tsan_enable" = 0; "param_diag_sanitizer_tsan_stopOnIssue" = 0; "param_diag_sanitizer_ubsan_enable" = 0; "param_diag_sanitizer_ubsan_stopOnIssue" = 0; "param_diag_showNonLocalizedStrings" = 0; "param_diag_viewDebugging_enabled" = 1; "param_diag_viewDebugging_insertDylibOnLaunch" = 1; "param_install_style" = 2; "param_launcher_UID" = 2; "param_launcher_allowDeviceSensorReplayData" = 0; "param_launcher_kind" = 0; "param_launcher_style" = 99; "param_launcher_substyle" = 0; "param_lldbVersion_component_idx_1" = 0; "param_lldbVersion_monotonic" = 210000160004; "param_runnable_appExtensionHostRunMode" = 0; "param_runnable_productType" = "com.apple.product-type.application"; "param_testing_launchedForTesting" = 0; "param_testing_suppressSimulatorApp" = 0; "param_testing_usingCLI" = 0; "sdk_canonicalName" = "iphoneos26.4"; "sdk_osVersion" = "26.4"; "sdk_platformID" = 2; "sdk_variant" = iphoneos; "sdk_version_monotonic" = 2304023700; } System Information macOS Version 26.4 (Build 25E246) Xcode 26.4 (24909) (Build 17E192) Timestamp: 2026-03-30T09:59:46+02:00

Is it possible to build localization into console apps, developed in SwiftUI in Xcode26. I have created a catalog, (.xcstrings file) with an English and fr-CA string. I have tried to display the French text without success. I am using the console app to test a package which also has English/French text. English text works fine in both package and the console main, but I cannot generate the French. From what I can discover so far it's not possible without bundling it as a .app, (console app). Looking for anyone who has crossed this bridge.

I’m seeing a regression in Xcode 26.4 where Interface Builder will not allow connecting IBOutlets or IBActions. Symptoms: The usual gutter circle/dot does not appear next to IBOutlet / IBAction in the code editor Because of this, I cannot: drag from storyboard → code drag from code → storyboard The class is valid and already connected to the storyboard (existing outlets work) Assistant Editor opens the correct view controller file Important: The exact same project, unchanged, works perfectly in Xcode 26.3. I can create and connect outlets/actions normally there. ⸻ Environment Xcode: 26.4 macOS: 26.4 Mac Mini M4 Pro 64G Ram Project: Objective-C UIKit app using Storyboards This is a long-running, ObjC, project (not newly created) ⸻ What I’ve already tried To rule out the usual suspects: Verified View Controller Custom Class is correctly set in Identity Inspector Verified files are in the correct Target Membership Verified outlets are declared correctly in the .h file: @property (weak, nonatomic) IBOutlet UILabel *exampleLabel; Opened correct file manually (not relying on Automatic Assistant) Tried both: storyboard → code drag code → storyboard drag Tried using Connections Inspector Clean Build Folder Deleted entire DerivedData Restarted Xcode Updated macOS to 26.4 Ran: sudo xcodebuild -runFirstLaunch Confirmed required platform components installed Reopened project fresh ⸻ Observations In Xcode 26.4 the outlet “connection circles” are completely missing In Xcode 26.3 they appear immediately for the same code Existing connections still function at runtime — this is purely an Interface Builder issue ⸻ Question The gutter circles appearance has always been flaky in Xcode over the 13+ years I've been using it but now with 26.4 they have completely disappeared. Has anyone else seen this in Xcode 26.4, or found a workaround? At this point it looks like a regression in Interface Builder, but I haven’t found any mention of it yet.

Hi, I’m looking for clarification on TN3134: Network Extension provider deployment, specifically iOS deployment requirements for: packet tunnel provider DNS proxy provider From the documentation: Packet Tunnel Provider App extension (min iOS 9.0): per-app mode requires a managed device DNS Proxy Provider App extension (min iOS 11.0): supervised devices only App extension (min iOS 11.0): per-app mode requires managed devices Issue I implemented a DNS proxy using NEDNSProxyManager. Works as expected in debug builds on a local device Fails to configure when distributed via TestFlight Console Output (TestFlight build) error 10:05:39.872258-0500 nehelper The production version of *** is not allowed to create DNS proxy configurations. Use MDM to create DNS Proxy configurations for the production version of ***. Question Is it possible to distribute a DNS proxy provider for use on non-MDM / non-supervised devices? If not: Is the limitation strictly enforced at distribution/runtime? Is a packet tunnel provider the only viable alternative for App Store distribution? There is a lot of different VPN apps on the App Store that appear to work out of the box without MDM or supervision, which suggests they are using a different deployment model. Thank you for any clarification or guidance!

I am experiencing a UI issue after migrating my app from Xcode 16 to Xcode 26. In my implementation, I have a toolbar that contains multiple buttons along with a dropdown menu. The hierarchy for dropdown is as follows: **Toolbar → ToolbarItem → View → Menu → Picker ** Prior to Xcode 26, this setup worked smoothly in production builds. The dropdown (Menu + Picker) behaves as expected, and selecting a value triggers loading a dataset containing thousands of records on the screen. However, after upgrading to Xcode 26, I am observing an animation glitch when dismissing the dropdown after a selection is made. Specifically, the dropdown briefly shows a “capsule-like” animation artifact during dismissal, which persists for a few seconds. This visual issue is noticeable and negatively impacts the perceived performance and user experience of the app. This issue is occurring in an already released app built with Xcode 26. Questions: Is this a known issue or regression in Xcode 26 / SwiftUI Menu or Picker components? If yes, are there any known fixes or upcoming Xcode versions where this is resolved? If not, what would be the recommended approach to eliminate or minimize this animation glitch when dismissing the dropdown? Additional Context: The issue appears only after migration to Xcode 26. The dataset loaded after selection is large (thousands of records). The glitch specifically occurs during the dismissal animation of the Menu/Picker. Any guidance or workarounds would be greatly appreciated.

‌Using Xcode 26, the built package encounters device compatibility issues — while it installs successfully on supported iPhone devices, but it crashes immediately upon launch and cannot run normally.‌‌In previous versions of Xcode, the same "minimum deployment" setting in the project did not cause such compatibility issues.‌ The app built with Xcode 26 shows the following behavior when installed and tested on various devices:‌ iPhone6p iOS12.5.8 fails to run 2.iPhone6 iOS11 fails to run 3.Iphone6 iOS12.5.7 fails to run 4.iPhone7 iOS12.1.3 ok 5.iPhoneX iOS 12.2 ok 6.iphone6s plus iOS10.3.1 ok 7.iphoneXS. iOS 12.1.4 ok 8.iPhone11 iOS 13.6.1 ok 9.iPhone7. iOS 13.7 ok We have tested and found that an iPhone 6s Plus running iOS 10.3.1 can normally run the app. We would like to know whether apps built with Xcode 26 are inherently incompatible with iPhone 6 and older devices. Has Xcode 26’s underlying build environment removed full support for the A8 chip, resulting in binary files containing instructions or memory models that older devices cannot parse? ‌Looking forward to your reply‌.

Each time I launch a Debug version of the app on iOS Simulator, I see the Launch Screen presented and then about a 30-second delay before the app is responsive and debug output appears in the console panel. Filed FB22345091

My app uses SwiftData so I need at least iOS 17 as the minimum deployment target. When I select iOS 17 in the dropdown it selects iOS 17.6 as the target. However, the newest simulator available is iOS 17.5. Should I set my minimum deployment target to 17.0, 17.5, 17.6, or something else?

After updating to Xcode 26.4 (public release), I’m no longer able to paste from the Mac clipboard into the Simulator. Automatically Sync Pasteboard is on, and I have content on the clipboard, but paste doesn’t work—Cmd+V does nothing, and there’s no Paste option in the context menu. Is anyone else seeing this?

The error: When building a RealityKitContent package that contains a USDZ file exported from Blender, Xcode throws the following error: error: [xrsimulator] Exception thrown during compile: Cannot get rkassets content for path .../RealityKitContent.rkassets because 'The file "RealityKitContent.rkassets" couldn't be opened because you don't have permission to view it.' error: Tool exited with code 1 The error message mentions "permission" — but permissions are not the issue. This appears to be a misleading error from realitytool masking a USD validation failure. What I've ruled out File permissions — all files are -rw-r--r--, user has Read & Write on the folder Extended attributes / quarantine flag — other files with the same @ flag work fine Corrupted archive — unzip -t confirms the USDZ is valid (board.usdc + textures) Stale build cache — deleted DerivedData and com.apple.DeveloperTools cache, no change Key observations The same file builds successfully on my colleague's machine running identical Xcode 26.3 - MacOS 26.3 Other USDZ files in the same .rkassets bundle (downloaded from Sketchfab, or created in Reality Composer Pro) compile without any issue. Only USDZ files exported directly from Blender are affected. When the file is placed in Bundle.main and loaded via Entity(named:in:.main), it works perfectly — no errors Reality Converter flags the file with two errors: UsdGeomPointInstancers not allowed, and root layer must be .usdc with no external dependencies The confusing part: the same file compiles fine on an identical Xcode 26.3 setup and importing method. This suggests either a machine-specific difference in Xcode's validation behavior, or a cached .reality bundle on my colleague's machine that isn't being recompiled. Current workaround: Loading from Bundle.main instead of the RealityKitContent package bypasses realitytool entirely and works, but loses Reality Composer Pro integration: if let entity = try? await Entity(named: "test", in: Bundle.main)

Is it mandatory for all developers to migrate to Xcode 26 starting from April 28, 2026? What happens if a developer submits or distributes a build created using Xcode 16 after April 28, 2026? Will it still be accepted or supported? Our app is distributed only via an internal company portal (not through the App Store). In this case, are we still required to build and distribute the app using Xcode 26 after April 28, 2026? If a hotfix is required before our next planned release (July 2026), how safe is it to use the UIDesignRequiresCompatibility flag as a temporary solution, assuming Xcode 26 becomes mandatory? Are there any risks or limitations associated with this approach? What are the potential issues if a team continues development on Xcode 16 while others have migrated to Xcode 26? For example, could there be compatibility, build, or integration challenges in such a mixed environment? If the UIDesignRequiresCompatibility flag is used as a temporary workaround, what would be the impact if Apple later removes support for this flag, especially with newer iOS versions (e.g., iOS 26+)? For users who already have the app installed with this flag enabled For users installing the app for the first time after such changes