iOS is the operating system for iPhone.

All subtopics
Posts under iOS topic

Post

Replies

Boosts

Views

Created

I Need Developer Help
Hello, I have created an app in Emergent that I am trying to set up on the app store, but I am lost. As you might expect, I am new at this. I know this app is a winner. It's all about productivity. I can't pay, but I am willing to share the rights to the app with the person that helps me get it going. I would also like to put in in Android, so if you can help there it would be even better.
0
0
84
Feb ’26
App Groups container data on Apple Dev account transfer
I have an iOS app with App Groups. The app uses the CallKit extension for call block functionality. All data is stored in UserDefaults(suiteName:) and FileManager.default.containerURL(forSecurityApplicationGroupIdentifier: ). I am planning to transfer this app to a different Apple Developer account and would like to clarify how App Groups behave after the transfer: Will my main app Target and CallKit Extensions keep access to the same AppGroups containers with the new Team ID? I will recreate the same AppGroups container identifiers on a new account but my concern is about Team ID change, that can lead to loss access to original containers and all data from previous Team ID. I need to clearly understand whether the app can continue accessing the existing App Group container after the Team ID changes, or if I must manually back up data before transfer and restore all data after transfer completed. As long as the App Group still exists on the original developer account and the user has not updated the app, will the app continue to function normally and access the original App Group container? If I delete the App Group identifiers from the original developer account and recreate it on the new account: 3.1. Will this immediately apply for existing installed apps? 3.2. Or will the impact only occur after submitting and installing a new app version signed with the new Team ID?
3
1
282
Feb ’26
About audio playback panel after call end.
Dear Apple Support Team, Thank you for your continued support. I would like to inquire about the behavior of CallKit. Our company provides an office PBX extension phone application (iPhone app). When the iPhone is placed into sleep mode (screen off) and our app receives an incoming call, the following sequence sometimes results in an audio playback panel appearing at the bottom of the lock screen for a few seconds after the call ends(See attachment file for detail). Sequence to reproduce the issue: Put the iPhone into sleep mode (screen off). Receive an incoming call to our extension phone app. CallKit incoming call screen appears. Answer the call. Conduct the call. End the call from the peer. iOS versions with confirmed behavior: iOS 26.0: Not observed. iOS 26.2: Observed. iOS 26.3: Not observed. This behavior does not affect the call functionality itself; however, some users report that the temporary appearance of the audio playback panel feels unusual. If there is any known reason for this behavior or any recommended workaround, we would greatly appreciate your guidance. Additionally, if this is a known issue that was addressed in iOS 26.3, we would appreciate any information you can provide regarding that as well. Thank you very much for your assistance.
2
0
170
Feb ’26
What is it so hard to develop on the Watch?
I am trying to develop a Watch and iOS app as companion. It is beyond stupid how I can not keep the watch connected to Xcode to develop. I have tried all the so-called tricks. Why is this so fragile? The phone is USB connected to my Mac I have tried turning off the wifi on my Mac and have the phone and watch on the same network. Nada I have tried just having everything on the same network. The watch is connected maybe 20% of the time. I have tried creating a hotspot network with my phone. The watch is connected maybe 50% of the time. This is truly an awful experience. Am I doing something wrong? Any advice would be grateful.
2
0
153
Feb ’26
Keeping PiP alive during third-party video recording (camera capture)
I’m building a teleprompter-style app that relies on Picture in Picture. PiP starts correctly on device. Everything works — until another app (e.g. TikTok / Instagram) starts active video recording. When camera capture begins in the foreground app, iOS terminates my PiP session. Some teleprompter apps appear to keep PiP active while recording in other apps, so I’m trying to understand the recommended architectural pattern for this scenario. Is there a documented approach or best practice to keep PiP stable during third-party camera capture? Looking specifically for guidance on the correct AVKit / AVAudioSession configuration for this use case.
0
0
275
Feb ’26
External Keyboard DatePicker Issues
I am currently trying to get my app ready for full external keyboard support, while testing I found an issue with the native DatePicker. Whenever I enter the DatePicker with an external keyboard it only jumps to the time picker and I am not able to move away from it. Arrow keys don't work, tab and control + tab only move me to the toolbar and back. This is how they look like private var datePicker: some View { DatePicker( "", selection: date, in: minDate..., displayedComponents: [.date] ) .fixedSize() .accessibilityIdentifier("\(datePickerLabel).DatePicker") } private var timePicker: some View { DatePicker( "", selection: date, in: minDate..., displayedComponents: [.hourAndMinute] ) .fixedSize() .accessibilityIdentifier("\(datePickerLabel).TimePicker") } private var datePickerLabelView: some View { Text(datePickerLabel.localizedString) .accessibilityIdentifier(datePickerLabel) } And we implement it like this in the view: HStack { datePickerLabelView Spacer() datePicker timePicker } Does anyone know how to fix this behavior? Is it our fault or is it the system? The issue comes up both in iOS 18 and 26.
0
2
399
Feb ’26
Minimum Functionality Rejection Blocks My App's Users
Parents often spend lots of time to search for kids' events and government programs. Even after they found ideal ones, they need lots of copy and paste to check Google Map in order to align with their time and location. My app is designed to solve this pain point. It will handle those time consuming web search and time & location matching. For good user experience, the UI is simple, it recommends nearest kids programs that aligns with parents' time. It also has a Map to show suggestions visually and provides map navigation. Parents are all very busy, the UI has to be simple and easy to use. This app can save parents 60% of time to find kids' programs. The v1.0.0 of this app got approved. It works well on Android phones all the time, but the map navigation didn't work on iOS. I later realized have to add LSApplicationQueriesSchemes to enable map navigation on iOS app. So I fixed this and tested the new build on iOS phones, the new build 1.0.1 works well. But Apple reviews rejects 1.0.1 because of "Minimum Functionality". So now I'm in an awkward situation, 1) the app works well on Android 2) the approved iOS build can't open map navigation on iOS 3) the fixed iOS build got rejected because of "Minimum Functionality".... Really frustrating. Even if I add new features to meet "Minimum Functionality", for parents, they need simple UI because of their busy schedules, adding new features may create more complex UX. Is that possible to have Apple approve 1.0.1 build first, at least make sure the app works without error for iOS users first, this app can already save parents lots of time. Then give me more time to add new features? Otherwise, what's the minimum I can add to get the new build approved first? Thank you!
1
0
113
Feb ’26
Collecting OSLog logs from network extensions
I have an iOS app with a network extension that's using OSLog to log various bits of information that are useful for debugging. I'm currently trying to add a simple button that bundles up those logs with some other information and presents the user with a Share sheet so they can send it to support teams. I looked at OSLogStore but it only collects logs for the current process so the user clicking a button in my app wouldn't collect logs from my network extension. I would really like to avoid having to guide users through the process of creating and sharing a sysdiagnose but it seems like this might be the only option. How do other folks do this kind of thing? Is there a recommended way to do it?
1
0
91
Feb ’26
Strong Password Suggestion Clears Other Secure Fields
I can't seem to find information on this but this is causing a critical bug where the Strong Password suggestion sheet presents on any secure field (UIKit) and clears the others when closing it. This means the user cannot enter a password when there is a secure confirm password field because switching fields clears the other. This looks to be a recent issue but I can't tell when this was introduced or if this is SDK / OS version related. I am finding it in both Xcode 26.2 and 16.4 when running on device (iOS 26.2.1 and XC 26 simulators). Code to reproduce: class ViewController: UIViewController { override func loadView() { let v = UIStackView() v.axis = .vertical v.layoutMargins = .init(top: 16, left: 16, bottom: 16, right: 16) v.isLayoutMarginsRelativeArrangement = true view = v let t1 = UITextField() t1.textContentType = .username t1.placeholder = "Username" v.addArrangedSubview(t1) let t2 = UITextField() t2.isSecureTextEntry = true t2.textContentType = .newPassword t2.placeholder = "Password" t2.clearsOnInsertion = false t2.clearsOnBeginEditing = false t2.passwordRules = nil t2.clearButtonMode = .always v.addArrangedSubview(t2) let t3 = UITextField() t3.isSecureTextEntry = true t3.textContentType = .newPassword t3.placeholder = "Confirm Password" t3.clearsOnInsertion = false t3.clearsOnBeginEditing = false t3.passwordRules = nil t3.clearButtonMode = .always v.addArrangedSubview(t3) v.addArrangedSubview(UIView()) } } No matter what textContentType is used the strong password still forcefully breaks the flow and blocks the user.
1
0
132
Feb ’26
Crash/Exception thrown in UITableView initialization stack
Hello, We are seeing an intermittent crash when initializing a base UITableView with Apple's [initWithFrame:style:] initializer. Crash stack: Role: Foreground OS Version: iOS 26.1 Exception Type: EXC_BREAKPOINT Exception Subtype: KERN_INVALID_ADDRESS EXC_BREAKPOINT: 0 libswiftCore.dylib +0x1358c0 _assertionFailure(_:_:file:line:flags:) 1 UIKitCore +0x1fdca0 0x188c26ca0 (0x188c26b20 + 384) 2 UIKitCore +0x1ffa60 0x188c28a60 (0x188c2890c + 340) 3 UIKitCore +0x2012d0 0x188c2a2d0 (0x188c2a1ec + 228) 4 UIKitCore +0x200f20 0x188c29f20 (0x188c29cac + 628) 5 UIKitCore +0x200428 0x188c29428 (0x188c29384 + 164) 6 UIKitCore +0x18af7f4 -[UITableMetricsAdapter _updateSharedSectionMetricsForListGeometry:] 7 UIKitCore +0x201da8 -[UITableMetricsAdapter tableBackgroundColor] 8 UIKitCore +0x1643a44 ___39-[UITableView _applyAppearanceDefaults]_block_invoke 9 UIKitCore +0x196f3d0 +[UIView _performSystemAppearanceModifications:] 10 UIKitCore +0x1643978 -[UITableView _applyAppearanceDefaults] 11 UIKitCore +0x202854 -[UITableView _setupTableViewCommon] 12 UIKitCore +0x1643760 -[UITableView initWithFrame:style:] 13 Application +0x30b6a40 closure #1 in variable initialization expression of MyAppClass.tableView 14 Application +0x30b6ef0 MyAppClass.init(frame:) Has anyone else seen something like this? Any insights or advice is much appreciated, thank you!
1
0
144
Feb ’26
Reproducible EXC_BAD_ACCESS in NEDNSProxyProvider when using async/await variants of NEAppProxyUDPFlow
Description I am seeing a consistent crash in a NEDNSProxyProvider on iOS when migrating from completion handlers to the new Swift Concurrency async/await variants of readDatagrams() and writeDatagrams() on NEAppProxyUDPFlow. The crash occurs inside the Swift Concurrency runtime during task resumption. Specifically, it seems the Task attempts to return to the flow’s internal serial executor (NEFlow queue) after a suspension point, but fails if the flow was invalidated or deallocated by the kernel while the task was suspended. Error Signature Thread 4: EXC_BAD_ACCESS (code=1, address=0x28) Thread 4 Queue : NEFlow queue (serial) #0 0x000000018fe919cc in swift::AsyncTask::flagAsAndEnqueueOnExecutor () #9 0x00000001ee25c3b8 in _pthread_wqthread () Steps The crash is highly timing-dependent. To reproduce it reliably: Use an iOS device with Developer Settings enabled. Go to Developer > Network Link Conditioner -> High Latency DNS. Intercept a DNS query and perform a DoH (DNS-over-HTTPS) request using URLSession. The first few network requests should trigger the crash Minimum Working Example (MWE) class DNSProxyProvider: NEDNSProxyProvider { override func handleNewFlow(_ flow: NEAppProxyFlow) -> Bool { guard let udpFlow = flow as? NEAppProxyUDPFlow else { return false } Task(priority: .userInitiated) { await handleUDPFlow(udpFlow) } return true } func handleUDPFlow(_ flow: NEAppProxyUDPFlow) async { do { try await flow.open(withLocalFlowEndpoint: nil) while !Task.isCancelled { // Suspension point 1: Waiting for datagrams let (flowData, error) = await flow.readDatagrams() if let error { throw error } guard let flowData, !flowData.isEmpty else { return } var responses: [(Data, Network.NWEndpoint)] = [] for (data, endpoint) in flowData { // Suspension point 2: External DoH resolution let response = try await resolveViaDoH(data) responses.append((response, endpoint)) } // Suspension point 3: Writing back to the flow // Extension will crash here on task resumption try await flow.writeDatagrams(responses) } } catch { flow.closeReadWithError(error) flow.closeWriteWithError(error) } } private func handleFlowData(_ packet: Data, endpoint: Network.NWEndpoint, using parameters: NWParameters) async throws -> Data { let url = URL(string: "https://dns.google/dns-query")! var request = URLRequest(url: url) request.httpMethod = "POST" request.httpBody = packet request.setValue("application/dns-message", forHTTPHeaderField: "Content-Type") let (data, _) = try await URLSession.shared.data(for: request) return data } } Crash Details & Analysis The disassembly at the crash point indicates a null dereference of an internal executor pointer (Voucher context): ldr x20, [TPIDRRO_EL0 + 0x340] ldr x0, [x20, #0x28] // x20 is NULL/0x0 here, resulting in address 0x28 It appears that NEAppProxyUDPFlow’s async methods bind the Task to a specific internal executor. When the kernel reclaims the flow memory, the pointer in x20 becomes invalid. Because the Swift runtime is unaware that the NEFlow queue executor has vanished, it attempts to resume on non-existing flow and then crashes. Checking !Task.isCancelled does not prevent this, as the crash happens during the transition into the task body before the cancellation check can even run. Questions Is this a known issue of the NetworkExtension async bridge? Why does Task.isCancelled not reflect the deallocation of the underlying NEAppProxyFlow? Is the only safe workaround? Please feel free to correct me if I misunderstood anything here. I'll be happy to hear any insights or suggestions :) Thank you!
4
0
357
Feb ’26
iOS 26: hidesSharedBackground does not work for backBarButtonItem
What works let backButton = UIBarButtonItem(title: "", style: .plain, target: nil, action: nil) backButton.hidesSharedBackground = true self.navigationItem.rightBarButtonItem = backButton // or self.navigationItem.leftBarButtonItem = backButton What doesn't work let backButton = UIBarButtonItem(title: "", style: .plain, target: nil, action: nil) backButton.hidesSharedBackground = true self.navigationItem.backBarButtonItem = backButton I've tried setting this property on all possible permutations and combinations e.g. Inside navigationController(_ navigationController: UINavigationController, willShow viewController: UIViewController, animated: Bool) and pushViewController(_ viewController: UIViewController, animated: Bool) of a custom UINavigationController to make sure. Expected vs Actual behavior Setting hidesSharedBackground = true should remove the glass background from both regular bar button items and back bar button items but it has no effect on backBarButtonItem. Additional context I’m aware of the UIDesignRequiresCompatibility Info.plist key, but I’m looking for a programmatic solution if there is one. The goal is to remove the glass background from back buttons.
1
1
239
Feb ’26
Layout issue using .strokeBorder modifier
Hello, Developers! While writing custom view modifier I ran into unexpected behavior of .strokeBorder modifier. The underlying content seem to be “bleeding” outside of the stroke border edges, even though they share the exact same shape for their layout. This issue relevant for both Xcode Previews and on-device testing. Maybe someone has experienced this issue before, I'd be glad to see your opinion on this matter.
1
0
156
Feb ’26
UIActivityViewController not vertically scrollable when sharing CSV on specific device (Save option unreachable)
Platform UIKit iOS UIActivityViewController Environment Device (issue reported): iPhone 16 iOS Version: 26.2 App Type: UIKit / Swift (standard modal presentation of UIActivityViewController) Summary When presenting UIActivityViewController to share a CSV file, the share sheet does not allow vertical scrolling, making lower actions (including Save to Files) unreachable. The same flow works correctly when sharing a PDF, and the issue cannot be reproduced on other test devices. Steps to Reproduce Launch the app and log in Navigate to More → Reports Tap Export Report Choose Export Report (CSV) Observe the share sheet Expected Result The user should be able to vertically scroll the share sheet All share actions (including Save to Files) should be reachable Actual Result Share sheet opens but vertical scrolling is disabled Lower options (including Save to Files) are not reachable No crash or console errors
3
0
412
Feb ’26
Scheduled events reach threshold almost immediately on iOS 26.2
Hi, we are developing a screen time management app. The app locks the device after it was used for specified amount of time. After updating to iOS 26.2, we noticed a huge issue: the events started to fire (reach the threshold) in the DeviceActivityMonitorExtension prematurely, almost immediately after scheduling. The only solution we've found is to delete the app and reboot the device, but the effect is not lasting long and this does not always help. Before updating to iOS 26, events also used to sometimes fire prematurely, but rescheduling the event often helped. Now the rescheduling happens almost every second and the events keep reaching the threshold prematurely. Can you suggest any workarounds for this issue?
4
2
391
Feb ’26
Expected behavior of searchDomains
Based on https://developer.apple.com/documentation/networkextension/nednssettings/searchdomains , we expect the values mentioned in searchDomains to be appended to a single label DNS query. However, we are not seeing this behavior. We have a packetTunnelProvider VPN, where we set searchDomains to a dns suffix (for ex: test.com) and we set matchDomains to applications and suffix (for ex: abc.com and test.com) . When a user tries to access https://myapp , we expect to see a DNS query packet for myapp.test.com . However, this is not happening when matchDomainsNoSearch is set to true. https://developer.apple.com/documentation/networkextension/nednssettings/matchdomainsnosearch When matchDomainsNoSearch is set to false, we see dns queries for myapp.test.com and myapp.abc.com. What is the expected behavior of searchDomains?
10
0
324
Feb ’26
Scene-based Launch Detection
Our app supports UIScene. As a result, launchOptions in application(_:didFinishLaunchingWithOptions:) is always nil. However, the documentation mentions that UIApplication.LaunchOptionsKey.location should be present when the app is launched due to a location event. Given that our app is scene-based: How can we reliably determine whether the app was launched due to a location update, geofence, or significant location change? Is there a recommended pattern or API to detect this scenario in a Scene-based app lifecycle? This information is critical for us to correctly initialize location-related logic on launch. Relevant documentation: https://developer.apple.com/documentation/corelocation/cllocationmanager/startmonitoringsignificantlocationchanges()
4
1
366
Feb ’26
BLE Advertising in Background
For our research study, it is essential that the app can advertise BLE packets even when the app is no longer in the foreground (for example, when it is in the app switcher / recents state). Is it supported to advertise BLE packets while the app is in the background or recents state? If so, what are the specific requirements or limitations we should be aware of (background modes, payload size, timing, etc.)? Are there any constraints that would prevent consistent BLE advertising for research use cases?
2
0
344
Feb ’26
List rows partially obscured by navigation bar briefly render fully opaque when switching tabs (iOS 26)
Overview In iOS 26, a List embedded in a NavigationStack inside a TabView exhibits a visual glitch when switching tabs. When the list is scrolled such that some rows are partially obscured by the navigation bar, the system correctly applies a fade/opacity effect to those rows. However, if the user switches to another tab while rows are in this partially obscured (faded) state, those rows briefly flash at full opacity during the tab transition before disappearing. This flash is visually distracting and appears to be inconsistent with the intended scroll-edge opacity behavior. The issue occurs only for rows partially obscured by the navigation bar. Rows partially obscured by the tab bar do not exhibit this flashing behavior. Steps to Reproduce: Run the attached minimal reproduction on iOS 26. Open the first tab. Scroll the list so that some rows are partially hidden behind the navigation bar (showing the native faded appearance). While rows are in this partially faded state, switch to the second tab. Observe that the faded rows briefly render fully opaque during the tab switch. Expected Behavior: Rows that are partially obscured by the navigation bar should maintain consistent opacity behavior during tab transitions, without flashing to full opacity. import SwiftUI @main struct NavBarReproApp: App { /// Minimal repro for iOS 26: /// - TabView with two tabs /// - First tab: NavigationStack + List /// - Scroll so some rows are partially behind the nav bar (faded) /// - Switch tabs: those partially-faded rows briefly flash fully opaque. Partially faded rows under the tab bar do not flash private let items = Array(0..<200).map { "Row \($0)" } var body: some Scene { WindowGroup { TabView { NavigationStack { List { ForEach(items, id: \.self) { item in Text(item) } } .navigationTitle("One") .navigationBarTitleDisplayMode(.inline) } .tabItem { Label("One", systemImage: "1.circle") } NavigationStack { Text("Second tab") .navigationTitle("Two") .navigationBarTitleDisplayMode(.inline) } .tabItem { Label("Two", systemImage: "2.circle") } } } } }
6
0
191
Jan ’26
I Need Developer Help
Hello, I have created an app in Emergent that I am trying to set up on the app store, but I am lost. As you might expect, I am new at this. I know this app is a winner. It's all about productivity. I can't pay, but I am willing to share the rights to the app with the person that helps me get it going. I would also like to put in in Android, so if you can help there it would be even better.
Replies
0
Boosts
0
Views
84
Activity
Feb ’26
App Groups container data on Apple Dev account transfer
I have an iOS app with App Groups. The app uses the CallKit extension for call block functionality. All data is stored in UserDefaults(suiteName:) and FileManager.default.containerURL(forSecurityApplicationGroupIdentifier: ). I am planning to transfer this app to a different Apple Developer account and would like to clarify how App Groups behave after the transfer: Will my main app Target and CallKit Extensions keep access to the same AppGroups containers with the new Team ID? I will recreate the same AppGroups container identifiers on a new account but my concern is about Team ID change, that can lead to loss access to original containers and all data from previous Team ID. I need to clearly understand whether the app can continue accessing the existing App Group container after the Team ID changes, or if I must manually back up data before transfer and restore all data after transfer completed. As long as the App Group still exists on the original developer account and the user has not updated the app, will the app continue to function normally and access the original App Group container? If I delete the App Group identifiers from the original developer account and recreate it on the new account: 3.1. Will this immediately apply for existing installed apps? 3.2. Or will the impact only occur after submitting and installing a new app version signed with the new Team ID?
Replies
3
Boosts
1
Views
282
Activity
Feb ’26
About audio playback panel after call end.
Dear Apple Support Team, Thank you for your continued support. I would like to inquire about the behavior of CallKit. Our company provides an office PBX extension phone application (iPhone app). When the iPhone is placed into sleep mode (screen off) and our app receives an incoming call, the following sequence sometimes results in an audio playback panel appearing at the bottom of the lock screen for a few seconds after the call ends(See attachment file for detail). Sequence to reproduce the issue: Put the iPhone into sleep mode (screen off). Receive an incoming call to our extension phone app. CallKit incoming call screen appears. Answer the call. Conduct the call. End the call from the peer. iOS versions with confirmed behavior: iOS 26.0: Not observed. iOS 26.2: Observed. iOS 26.3: Not observed. This behavior does not affect the call functionality itself; however, some users report that the temporary appearance of the audio playback panel feels unusual. If there is any known reason for this behavior or any recommended workaround, we would greatly appreciate your guidance. Additionally, if this is a known issue that was addressed in iOS 26.3, we would appreciate any information you can provide regarding that as well. Thank you very much for your assistance.
Replies
2
Boosts
0
Views
170
Activity
Feb ’26
What is it so hard to develop on the Watch?
I am trying to develop a Watch and iOS app as companion. It is beyond stupid how I can not keep the watch connected to Xcode to develop. I have tried all the so-called tricks. Why is this so fragile? The phone is USB connected to my Mac I have tried turning off the wifi on my Mac and have the phone and watch on the same network. Nada I have tried just having everything on the same network. The watch is connected maybe 20% of the time. I have tried creating a hotspot network with my phone. The watch is connected maybe 50% of the time. This is truly an awful experience. Am I doing something wrong? Any advice would be grateful.
Replies
2
Boosts
0
Views
153
Activity
Feb ’26
Keeping PiP alive during third-party video recording (camera capture)
I’m building a teleprompter-style app that relies on Picture in Picture. PiP starts correctly on device. Everything works — until another app (e.g. TikTok / Instagram) starts active video recording. When camera capture begins in the foreground app, iOS terminates my PiP session. Some teleprompter apps appear to keep PiP active while recording in other apps, so I’m trying to understand the recommended architectural pattern for this scenario. Is there a documented approach or best practice to keep PiP stable during third-party camera capture? Looking specifically for guidance on the correct AVKit / AVAudioSession configuration for this use case.
Replies
0
Boosts
0
Views
275
Activity
Feb ’26
External Keyboard DatePicker Issues
I am currently trying to get my app ready for full external keyboard support, while testing I found an issue with the native DatePicker. Whenever I enter the DatePicker with an external keyboard it only jumps to the time picker and I am not able to move away from it. Arrow keys don't work, tab and control + tab only move me to the toolbar and back. This is how they look like private var datePicker: some View { DatePicker( "", selection: date, in: minDate..., displayedComponents: [.date] ) .fixedSize() .accessibilityIdentifier("\(datePickerLabel).DatePicker") } private var timePicker: some View { DatePicker( "", selection: date, in: minDate..., displayedComponents: [.hourAndMinute] ) .fixedSize() .accessibilityIdentifier("\(datePickerLabel).TimePicker") } private var datePickerLabelView: some View { Text(datePickerLabel.localizedString) .accessibilityIdentifier(datePickerLabel) } And we implement it like this in the view: HStack { datePickerLabelView Spacer() datePicker timePicker } Does anyone know how to fix this behavior? Is it our fault or is it the system? The issue comes up both in iOS 18 and 26.
Replies
0
Boosts
2
Views
399
Activity
Feb ’26
Minimum Functionality Rejection Blocks My App's Users
Parents often spend lots of time to search for kids' events and government programs. Even after they found ideal ones, they need lots of copy and paste to check Google Map in order to align with their time and location. My app is designed to solve this pain point. It will handle those time consuming web search and time & location matching. For good user experience, the UI is simple, it recommends nearest kids programs that aligns with parents' time. It also has a Map to show suggestions visually and provides map navigation. Parents are all very busy, the UI has to be simple and easy to use. This app can save parents 60% of time to find kids' programs. The v1.0.0 of this app got approved. It works well on Android phones all the time, but the map navigation didn't work on iOS. I later realized have to add LSApplicationQueriesSchemes to enable map navigation on iOS app. So I fixed this and tested the new build on iOS phones, the new build 1.0.1 works well. But Apple reviews rejects 1.0.1 because of "Minimum Functionality". So now I'm in an awkward situation, 1) the app works well on Android 2) the approved iOS build can't open map navigation on iOS 3) the fixed iOS build got rejected because of "Minimum Functionality".... Really frustrating. Even if I add new features to meet "Minimum Functionality", for parents, they need simple UI because of their busy schedules, adding new features may create more complex UX. Is that possible to have Apple approve 1.0.1 build first, at least make sure the app works without error for iOS users first, this app can already save parents lots of time. Then give me more time to add new features? Otherwise, what's the minimum I can add to get the new build approved first? Thank you!
Replies
1
Boosts
0
Views
113
Activity
Feb ’26
Collecting OSLog logs from network extensions
I have an iOS app with a network extension that's using OSLog to log various bits of information that are useful for debugging. I'm currently trying to add a simple button that bundles up those logs with some other information and presents the user with a Share sheet so they can send it to support teams. I looked at OSLogStore but it only collects logs for the current process so the user clicking a button in my app wouldn't collect logs from my network extension. I would really like to avoid having to guide users through the process of creating and sharing a sysdiagnose but it seems like this might be the only option. How do other folks do this kind of thing? Is there a recommended way to do it?
Replies
1
Boosts
0
Views
91
Activity
Feb ’26
Strong Password Suggestion Clears Other Secure Fields
I can't seem to find information on this but this is causing a critical bug where the Strong Password suggestion sheet presents on any secure field (UIKit) and clears the others when closing it. This means the user cannot enter a password when there is a secure confirm password field because switching fields clears the other. This looks to be a recent issue but I can't tell when this was introduced or if this is SDK / OS version related. I am finding it in both Xcode 26.2 and 16.4 when running on device (iOS 26.2.1 and XC 26 simulators). Code to reproduce: class ViewController: UIViewController { override func loadView() { let v = UIStackView() v.axis = .vertical v.layoutMargins = .init(top: 16, left: 16, bottom: 16, right: 16) v.isLayoutMarginsRelativeArrangement = true view = v let t1 = UITextField() t1.textContentType = .username t1.placeholder = "Username" v.addArrangedSubview(t1) let t2 = UITextField() t2.isSecureTextEntry = true t2.textContentType = .newPassword t2.placeholder = "Password" t2.clearsOnInsertion = false t2.clearsOnBeginEditing = false t2.passwordRules = nil t2.clearButtonMode = .always v.addArrangedSubview(t2) let t3 = UITextField() t3.isSecureTextEntry = true t3.textContentType = .newPassword t3.placeholder = "Confirm Password" t3.clearsOnInsertion = false t3.clearsOnBeginEditing = false t3.passwordRules = nil t3.clearButtonMode = .always v.addArrangedSubview(t3) v.addArrangedSubview(UIView()) } } No matter what textContentType is used the strong password still forcefully breaks the flow and blocks the user.
Replies
1
Boosts
0
Views
132
Activity
Feb ’26
Crash/Exception thrown in UITableView initialization stack
Hello, We are seeing an intermittent crash when initializing a base UITableView with Apple's [initWithFrame:style:] initializer. Crash stack: Role: Foreground OS Version: iOS 26.1 Exception Type: EXC_BREAKPOINT Exception Subtype: KERN_INVALID_ADDRESS EXC_BREAKPOINT: 0 libswiftCore.dylib +0x1358c0 _assertionFailure(_:_:file:line:flags:) 1 UIKitCore +0x1fdca0 0x188c26ca0 (0x188c26b20 + 384) 2 UIKitCore +0x1ffa60 0x188c28a60 (0x188c2890c + 340) 3 UIKitCore +0x2012d0 0x188c2a2d0 (0x188c2a1ec + 228) 4 UIKitCore +0x200f20 0x188c29f20 (0x188c29cac + 628) 5 UIKitCore +0x200428 0x188c29428 (0x188c29384 + 164) 6 UIKitCore +0x18af7f4 -[UITableMetricsAdapter _updateSharedSectionMetricsForListGeometry:] 7 UIKitCore +0x201da8 -[UITableMetricsAdapter tableBackgroundColor] 8 UIKitCore +0x1643a44 ___39-[UITableView _applyAppearanceDefaults]_block_invoke 9 UIKitCore +0x196f3d0 +[UIView _performSystemAppearanceModifications:] 10 UIKitCore +0x1643978 -[UITableView _applyAppearanceDefaults] 11 UIKitCore +0x202854 -[UITableView _setupTableViewCommon] 12 UIKitCore +0x1643760 -[UITableView initWithFrame:style:] 13 Application +0x30b6a40 closure #1 in variable initialization expression of MyAppClass.tableView 14 Application +0x30b6ef0 MyAppClass.init(frame:) Has anyone else seen something like this? Any insights or advice is much appreciated, thank you!
Replies
1
Boosts
0
Views
144
Activity
Feb ’26
Reproducible EXC_BAD_ACCESS in NEDNSProxyProvider when using async/await variants of NEAppProxyUDPFlow
Description I am seeing a consistent crash in a NEDNSProxyProvider on iOS when migrating from completion handlers to the new Swift Concurrency async/await variants of readDatagrams() and writeDatagrams() on NEAppProxyUDPFlow. The crash occurs inside the Swift Concurrency runtime during task resumption. Specifically, it seems the Task attempts to return to the flow’s internal serial executor (NEFlow queue) after a suspension point, but fails if the flow was invalidated or deallocated by the kernel while the task was suspended. Error Signature Thread 4: EXC_BAD_ACCESS (code=1, address=0x28) Thread 4 Queue : NEFlow queue (serial) #0 0x000000018fe919cc in swift::AsyncTask::flagAsAndEnqueueOnExecutor () #9 0x00000001ee25c3b8 in _pthread_wqthread () Steps The crash is highly timing-dependent. To reproduce it reliably: Use an iOS device with Developer Settings enabled. Go to Developer > Network Link Conditioner -> High Latency DNS. Intercept a DNS query and perform a DoH (DNS-over-HTTPS) request using URLSession. The first few network requests should trigger the crash Minimum Working Example (MWE) class DNSProxyProvider: NEDNSProxyProvider { override func handleNewFlow(_ flow: NEAppProxyFlow) -> Bool { guard let udpFlow = flow as? NEAppProxyUDPFlow else { return false } Task(priority: .userInitiated) { await handleUDPFlow(udpFlow) } return true } func handleUDPFlow(_ flow: NEAppProxyUDPFlow) async { do { try await flow.open(withLocalFlowEndpoint: nil) while !Task.isCancelled { // Suspension point 1: Waiting for datagrams let (flowData, error) = await flow.readDatagrams() if let error { throw error } guard let flowData, !flowData.isEmpty else { return } var responses: [(Data, Network.NWEndpoint)] = [] for (data, endpoint) in flowData { // Suspension point 2: External DoH resolution let response = try await resolveViaDoH(data) responses.append((response, endpoint)) } // Suspension point 3: Writing back to the flow // Extension will crash here on task resumption try await flow.writeDatagrams(responses) } } catch { flow.closeReadWithError(error) flow.closeWriteWithError(error) } } private func handleFlowData(_ packet: Data, endpoint: Network.NWEndpoint, using parameters: NWParameters) async throws -> Data { let url = URL(string: "https://dns.google/dns-query")! var request = URLRequest(url: url) request.httpMethod = "POST" request.httpBody = packet request.setValue("application/dns-message", forHTTPHeaderField: "Content-Type") let (data, _) = try await URLSession.shared.data(for: request) return data } } Crash Details & Analysis The disassembly at the crash point indicates a null dereference of an internal executor pointer (Voucher context): ldr x20, [TPIDRRO_EL0 + 0x340] ldr x0, [x20, #0x28] // x20 is NULL/0x0 here, resulting in address 0x28 It appears that NEAppProxyUDPFlow’s async methods bind the Task to a specific internal executor. When the kernel reclaims the flow memory, the pointer in x20 becomes invalid. Because the Swift runtime is unaware that the NEFlow queue executor has vanished, it attempts to resume on non-existing flow and then crashes. Checking !Task.isCancelled does not prevent this, as the crash happens during the transition into the task body before the cancellation check can even run. Questions Is this a known issue of the NetworkExtension async bridge? Why does Task.isCancelled not reflect the deallocation of the underlying NEAppProxyFlow? Is the only safe workaround? Please feel free to correct me if I misunderstood anything here. I'll be happy to hear any insights or suggestions :) Thank you!
Replies
4
Boosts
0
Views
357
Activity
Feb ’26
iOS 26: hidesSharedBackground does not work for backBarButtonItem
What works let backButton = UIBarButtonItem(title: "", style: .plain, target: nil, action: nil) backButton.hidesSharedBackground = true self.navigationItem.rightBarButtonItem = backButton // or self.navigationItem.leftBarButtonItem = backButton What doesn't work let backButton = UIBarButtonItem(title: "", style: .plain, target: nil, action: nil) backButton.hidesSharedBackground = true self.navigationItem.backBarButtonItem = backButton I've tried setting this property on all possible permutations and combinations e.g. Inside navigationController(_ navigationController: UINavigationController, willShow viewController: UIViewController, animated: Bool) and pushViewController(_ viewController: UIViewController, animated: Bool) of a custom UINavigationController to make sure. Expected vs Actual behavior Setting hidesSharedBackground = true should remove the glass background from both regular bar button items and back bar button items but it has no effect on backBarButtonItem. Additional context I’m aware of the UIDesignRequiresCompatibility Info.plist key, but I’m looking for a programmatic solution if there is one. The goal is to remove the glass background from back buttons.
Replies
1
Boosts
1
Views
239
Activity
Feb ’26
Layout issue using .strokeBorder modifier
Hello, Developers! While writing custom view modifier I ran into unexpected behavior of .strokeBorder modifier. The underlying content seem to be “bleeding” outside of the stroke border edges, even though they share the exact same shape for their layout. This issue relevant for both Xcode Previews and on-device testing. Maybe someone has experienced this issue before, I'd be glad to see your opinion on this matter.
Replies
1
Boosts
0
Views
156
Activity
Feb ’26
UIActivityViewController not vertically scrollable when sharing CSV on specific device (Save option unreachable)
Platform UIKit iOS UIActivityViewController Environment Device (issue reported): iPhone 16 iOS Version: 26.2 App Type: UIKit / Swift (standard modal presentation of UIActivityViewController) Summary When presenting UIActivityViewController to share a CSV file, the share sheet does not allow vertical scrolling, making lower actions (including Save to Files) unreachable. The same flow works correctly when sharing a PDF, and the issue cannot be reproduced on other test devices. Steps to Reproduce Launch the app and log in Navigate to More → Reports Tap Export Report Choose Export Report (CSV) Observe the share sheet Expected Result The user should be able to vertically scroll the share sheet All share actions (including Save to Files) should be reachable Actual Result Share sheet opens but vertical scrolling is disabled Lower options (including Save to Files) are not reachable No crash or console errors
Replies
3
Boosts
0
Views
412
Activity
Feb ’26
Scheduled events reach threshold almost immediately on iOS 26.2
Hi, we are developing a screen time management app. The app locks the device after it was used for specified amount of time. After updating to iOS 26.2, we noticed a huge issue: the events started to fire (reach the threshold) in the DeviceActivityMonitorExtension prematurely, almost immediately after scheduling. The only solution we've found is to delete the app and reboot the device, but the effect is not lasting long and this does not always help. Before updating to iOS 26, events also used to sometimes fire prematurely, but rescheduling the event often helped. Now the rescheduling happens almost every second and the events keep reaching the threshold prematurely. Can you suggest any workarounds for this issue?
Replies
4
Boosts
2
Views
391
Activity
Feb ’26
Expected behavior of searchDomains
Based on https://developer.apple.com/documentation/networkextension/nednssettings/searchdomains , we expect the values mentioned in searchDomains to be appended to a single label DNS query. However, we are not seeing this behavior. We have a packetTunnelProvider VPN, where we set searchDomains to a dns suffix (for ex: test.com) and we set matchDomains to applications and suffix (for ex: abc.com and test.com) . When a user tries to access https://myapp , we expect to see a DNS query packet for myapp.test.com . However, this is not happening when matchDomainsNoSearch is set to true. https://developer.apple.com/documentation/networkextension/nednssettings/matchdomainsnosearch When matchDomainsNoSearch is set to false, we see dns queries for myapp.test.com and myapp.abc.com. What is the expected behavior of searchDomains?
Replies
10
Boosts
0
Views
324
Activity
Feb ’26
Scene-based Launch Detection
Our app supports UIScene. As a result, launchOptions in application(_:didFinishLaunchingWithOptions:) is always nil. However, the documentation mentions that UIApplication.LaunchOptionsKey.location should be present when the app is launched due to a location event. Given that our app is scene-based: How can we reliably determine whether the app was launched due to a location update, geofence, or significant location change? Is there a recommended pattern or API to detect this scenario in a Scene-based app lifecycle? This information is critical for us to correctly initialize location-related logic on launch. Relevant documentation: https://developer.apple.com/documentation/corelocation/cllocationmanager/startmonitoringsignificantlocationchanges()
Replies
4
Boosts
1
Views
366
Activity
Feb ’26
BLE Advertising in Background
For our research study, it is essential that the app can advertise BLE packets even when the app is no longer in the foreground (for example, when it is in the app switcher / recents state). Is it supported to advertise BLE packets while the app is in the background or recents state? If so, what are the specific requirements or limitations we should be aware of (background modes, payload size, timing, etc.)? Are there any constraints that would prevent consistent BLE advertising for research use cases?
Replies
2
Boosts
0
Views
344
Activity
Feb ’26
Nearby WiFi list display on iOS app
Hi, I’m developing an iOS app that needs to list the nearby wifi list so User can tap and send via Tag. Is there any supported public iOS API or entitlement that allows listing nearby Wi-Fi networks in iOS app? Thank you.
Replies
0
Boosts
0
Views
47
Activity
Jan ’26
List rows partially obscured by navigation bar briefly render fully opaque when switching tabs (iOS 26)
Overview In iOS 26, a List embedded in a NavigationStack inside a TabView exhibits a visual glitch when switching tabs. When the list is scrolled such that some rows are partially obscured by the navigation bar, the system correctly applies a fade/opacity effect to those rows. However, if the user switches to another tab while rows are in this partially obscured (faded) state, those rows briefly flash at full opacity during the tab transition before disappearing. This flash is visually distracting and appears to be inconsistent with the intended scroll-edge opacity behavior. The issue occurs only for rows partially obscured by the navigation bar. Rows partially obscured by the tab bar do not exhibit this flashing behavior. Steps to Reproduce: Run the attached minimal reproduction on iOS 26. Open the first tab. Scroll the list so that some rows are partially hidden behind the navigation bar (showing the native faded appearance). While rows are in this partially faded state, switch to the second tab. Observe that the faded rows briefly render fully opaque during the tab switch. Expected Behavior: Rows that are partially obscured by the navigation bar should maintain consistent opacity behavior during tab transitions, without flashing to full opacity. import SwiftUI @main struct NavBarReproApp: App { /// Minimal repro for iOS 26: /// - TabView with two tabs /// - First tab: NavigationStack + List /// - Scroll so some rows are partially behind the nav bar (faded) /// - Switch tabs: those partially-faded rows briefly flash fully opaque. Partially faded rows under the tab bar do not flash private let items = Array(0..<200).map { "Row \($0)" } var body: some Scene { WindowGroup { TabView { NavigationStack { List { ForEach(items, id: \.self) { item in Text(item) } } .navigationTitle("One") .navigationBarTitleDisplayMode(.inline) } .tabItem { Label("One", systemImage: "1.circle") } NavigationStack { Text("Second tab") .navigationTitle("Two") .navigationBarTitleDisplayMode(.inline) } .tabItem { Label("Two", systemImage: "2.circle") } } } } }
Replies
6
Boosts
0
Views
191
Activity
Jan ’26