I have installed Sequoia and Xcode 16 and now I can't add packages to my (or any project). I just get a message saying the package can't be resolved. Basically I can't carry on developing. SORT THIS OUT APPLE

I've updated my computer to Sequoia 15, Xcode 16 and now no matter what I do, I am unable to work with Swift UI previews. I get this error each time I try to run the preview: Failed to launch app in reasonable time I have done: Uninstall/Re-install Xcode Deleted derived data Deleted the simulator data Used DevCleaner to remove all data related to Xcode Searched all websites about this issue. ( Non shown a good solution ) Write this question on here. If anyone has found a solution, please let me know how you fixed it.

Comments are not displayed correctly in Xcode 16. As you can see on the included screenshot, the first /// are displayed correctly but the remaining ////////////////////////// are super small. In a programming text editor, like Xcode, all characters MUST be monospaced. Otherwise it is impossible to code. Xcode is not supposed to be a word processor. There are no parameters to fix that. It was working fine for the past 15 years on Xcode. Please fix that so I can work again. And never do that ever again. Understood?

Error message: Previous preparation error: The developer disk image could not be mounted on this device.; Error mounting image: 0xe800010f (kAMDMobileImageMounterPersonalizedBundleMissingVariantError: The bundle image is missing the requested variant for this device.) I had no issues previously with my iPhone 13 Pro running iOS 18 and my XCode 15. Now, after switching to the iPhone 16 Pro, it won't work. I've tried restarting my phone several times, quitting XCode, removing and readding developer mode—nothing quite works.

Hi, I recently updated to Xcode 16. Since then I successfully built my app and sent an update to the App Store. But suddenly, after an exception I've experienced while working on my code, the app is crashing on launch, without showing the stack trace, and showing only one warning in the console: warning: (arm64) /Users/myuser/Library/Developer/Xcode/DerivedData/myapp-bglvscamatwthwbfqmtzmbvxeewc/Build/Products/Debug-iphonesimulator/myapp.app/MyApp empty dSYM file detected, dSYM was created with an executable with no debug info. Tried deleting derived data Erasing all simulator data Reseting my computer No change yet. Any idea what am I missing? Thank you..

Hello. In the Xcode 15 we were using this command in the terminal to run our tests on the Rosetta Simulator: xcodebuild -workspace CoreLibraries.xcworkspace -scheme CoreLibraries -destination 'platform=iOS Simulator,name=iPhone 15,arch=x86_64' test` In the Xcode 16 the same command doesn't work anymore. It produces the error: xcodebuild: error: Unable to find a device matching the provided destination specifier: { platform:iOS Simulator, arch:x86_64, OS:latest, name:iPhone 16 } Unsupported device specifier option. The device “iPhone 16” does not support the following options: arch Please supply only supported device specifier options. Running test directly from the Xcode UI using iPhone 16 (Rosetta) still works fine. Does anyone know how to modify the xcodebuild command to make it work again?

There is a significant regression in Xcode 16.0 and 16.1 (16B5014f) in that it no longer allows asset files other than .SCN files to be added to a .scnasset group and folder. This really wrecks our ability to maintain our app since we heavily depend on additional assets like .USDZ, .JPEG, .PNG, etc. files to be able to be included in the group for on-demand resource tagging and loading. I filed FB15239224 but I'm wondering if this is intentional and if anyone knows of a workaround.

I am using the latest version of Xcode 16, and I have created a GPX file in my project. However, I am unable to see or select the file to simulate the GPS location. I have attempted to uninstall and reinstall Xcode completely, but the issue persists. Has anyone encountered a similar problem? How can I resolve this? Thank you.

I installed xcode 16 and both Predictive Code Completion Model and iOS 18.0 Simulator Failed Download. I can live without the code completion, but I can not get any Simulator to install. I clicked of the info button and it shows the following: Download failed. Domain: DVTDownloadableErrorDomain Code: 41 User Info: { DVTErrorCreationDateKey = "2024-09-30 15:57:24 +0000"; } Download failed. Domain: DVTDownloadableErrorDomain Code: 41 Failed fetching catalog for assetType (com.apple.MobileAsset.iOSSimulatorRuntime), serverParameters ({ RequestedBuild = 22A3351; }) Domain: DVTDownloadsUtilitiesErrorDomain Code: -1 Download failed as the server said authentication failed. (Catalog download for com.apple.MobileAsset.iOSSimulatorRuntime) Domain: com.apple.MobileAssetError.Download Code: 41 User Info: { checkServer = 1; } System Information macOS Version 15.0 (Build 24A335) Xcode 16.0 (23051) (Build 16A242d) Timestamp: 2024-09-30T10:57:24-05:00

The Account Holder is no longer able to log into apple (regardless of web-based or device based attempts). The membership will expire soon without access to the account holder. Both workflows "iforgot.apple.com" and "iforgot.apple.com/unlock" did not lead to an answer email within several days. I tried several times. So we are almost out of store without any option. Hotline did not show other options. Any ideas?

Hi. I created a Message Filter Extension target to filter spam sms messages, deferring the request to my backend. The extension makes the call and send this payload: POST /server-endpoint HTTP/1.1 Accept: */* Content-Type: application/json; charset=utf-8 Content-Length: 148 { "_version": 1, "query": { "sender": "14085550001", "message": { "text": "This is a message" } }, "app": { "version": "1.1" } } My question is, is possible modify this payload to send the "receiver" number (is possible get the receiver number in this extension?), or use an identifier, to let my backend know which user number the filter was applied to. I think is impossible because the extension makes the call and create the payload, and I don't see anything in docs to add other prop, but there's other way to know the "receiver" number of the sms? Thanks:)

I’ve developed an Apple Watch extension for an existing iOS app. When I run the app on the watch via Xcode using the simulator, everything works fine. However, when I try to install it on my iPhone, the Watch app doesn’t show it in the "Available Apps" list, so I can't install it on the watch. The Apple Watch is connected to my iPhone, and I can see other apps available for installation without any issues. I also created a brand new project with watchOS support to troubleshoot, but the same problem occurred. Any ideas on how to resolve this?

I’ve noticed a strange bug in Xcode 16 and Swift. When a preview is rendering and hasn’t finished yet and you run an app to debug, Xcode is launching two instances of the app. Has anyone else noticed this issue? If you let the preview finish rendering before running the app, this doesn’t happen. Very odd.

I am trying to fix a bug in my iOS app that is dependent upon date and time. Is there any way to set the actual time on the iOS Simulator to a specific date and time? I know that you can set one for the status bar, but that doesn't affect the actual date and time that is reported by the system to apps.

Dear We try to generate IPA with Xcode Cloud but this task fail in Export archive phase (Export archive for app-store distribution). The error that appear in the archive logs is: error: exportArchive Provisioning profile "iOS Team Store Provisioning Profile: cl.app.myapp" doesn't include the com.apple.CommCenter.fine-grained entitlement. Any idea about to resolve this problem ? king regards

Hi, i have met error below when i tried to po one attributes of an instance in my Xcode lldb: error: type for self cannot be reconstructed: type for typename "$xxxxx" was not found (cached) error: Couldn't realize Swift AST type of self. Hint: using `v` to directly inspect variables and fields may still work. Is there anybody met the same error before? I urgently want to know why this happen and how to fix this issue. My macOS Version is Sequoia v15.0.1, Xcode16.0. This problem showed after i upgraded my macOS and Xcode version.

Initially, I had some issues enrolling in the individual Apple developer program. Then, I contacted support via email, and they finally requested that I verify my identity. I submitted my national ID for verification and then received an email stating that my identity was verified. After that, I tried to enroll in the Apple developer program, but the issue persisted even after they instructed me to proceed. Subsequently, I received an email stating that my identity was not verified. Here is the exact wording from the email: "We can’t verify your identity with the Apple Developer app or provide further assistance with the Apple Account for Apple developer programs." After that, I tried to reach support several times, but there has been no response from them.

Xcode Preview is not working. Successed to build Preview but error message displays like below: I think it's maybe related with loader path followed by error details below. I created xcproj file using tuist 4.19.0. How can I fix this issue? Error Details

I have a project which contains local packages. One of the packages has an explicit dependency on package A, but the main project also has the same dependency. Both of them are pinned to the exact version at all times. Should I manage "shared" dependencies at the project level for local packages? This seems counter intuitive at first, but this question is originating from me fighting with a "Build service could not create build operation: unable to load transferred PIF: The workspace contains multiple references with the same GUID" error in Xcode 16 (all versions). It happens when I switch branches. Closing and reopening Xcode does resolve the issue, but it's a real flow killer. The guide below doesn't mention dependency graph best practice. https://developer.apple.com/documentation/xcode/organizing-your-code-with-local-packages Thank in advance.

I have a major problem with team membership and Xcode. I work in a company, where my apple account was added to the development team with app manager role. I can see that on the apple portal, everything seems fine there. I have been also provided with the provisioning profile for the project and signing certificate of the company. However, when I log into Xcode the team does not show up anywhere. I am able to build the app, but cannot distribute to TestFlight (or anywhere else). When I use manual signing to choose the signing certificate it shows the "unknown team" message next to it. When I check my account in xcode it also only shows my personal team and does not allow to pick any other one (doesn't show any other one). When I click the "+" button on my xcode account to add a certificate an error pops up: "You already have active certificate or a pending request". I do have a pending request to enroll into apple developers program, but everyone says you don't need one if you are added to the team, you can just operate as a team member. Finally, when trying to upload to TestFlight, the following error is displayed: "No team for account ***" I have tried deleting and re-adding all the certificates. I have tried logging in and out of Xcode, I have tried deleting and re-adding my account in Xcode. I have tried reloading everything. My account was deleted and re-added to developers team. Nothing worked. I don't know the source of the issue, nor does my employer. I am new to ios development and this is my first project. Please help!